- 27 Apr, 2007 40 commits
-
-
Hartmut Hackmann authored
Besides power saving, this puts the AGC output of the tda8290 to tristate. This is necessary for some hybrid boards which don't use a multiplexer for the AGC Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Oliver Endriss authored
Fix bug introduced during infrared refactoring. Thanks to Johann Friedrichs for spotting this. Thanks-to: Johann Friedrichs <johann.friedrichs@web.de> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Ian Armstrong authored
Modifies automatic mode selection for yuv playback. Behaviour is now that source video with a vertical resolution below that of the currently set broadcast mode will be treated as progressive. Video with a vertical resolution greater or equal to the current broadcast mode (up to 576 lines) will be treated as interlaced. Signed-off-by:
Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Ian Armstrong authored
Adds more osd mode switching information. Corrects some information regarding mode selection & local alpha operation for 16 bit modes. Signed-off-by:
-
Hans Verkuil authored
The TV standard should be set AFTER the TV output is fully initialized. Signed-off-by:
-
Steven Toth authored
Some of the new tuner entries may need to be mapped to compatible tuners already defined. I don't know for certain which tuners are compatible between manufacturers. Signed-off-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
Michael Krufky authored
replace leading spaces with tabs Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
The ADS Tech InstantTV DVB-S is a clone of the KWorld DVB-S 100. This patch adds autodetection support for this card based on pci subsystem id. Signed-off-by:
-
Trent Piepho authored
Change a 00 to just 0 Detect zero-length I2C messages and return not supported. I think I know how to send one, but the problem is getting the slave's ack. The only point of a zero-length message is for probing; too see if the slave will ack its address. Since we don't know how to get the ack, we can't support zero-length messages in a useful way, so it's probably best to just return not supported for them. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Trent Piepho authored
Write some better documentation about what might be known about how the m920x I2C works, since a datasheet is lacking. The I2C xfer function should now handle more types of I2C transactions than it could before. Those it can't, will return error codes instead of being executed incorrectly. Multi-byte reads were not being done correctly, which should be fixed. Signed-off-by:
-
Aapo Tahkola authored
Signed-off-by:
Aapo Tahkola <aet@rasterburn.org> Signed-off-by:
-
Aapo Tahkola authored
Signed-off-by:
-
Aapo Tahkola authored
- r/w bit is not part of the i2c address Signed-off-by:
-
Aapo Tahkola authored
- Implement m920x i2c as suggested by Pierre Willenbrock - remove "magic" hack - r/w bit is not part of the i2c address - move hardware remarks to header file Signed-off-by:
-
Hans Verkuil authored
Once the devices have been registered anyone can start changing the inputs or TV standard before they have been initialized by the driver. This leads to cases were the input is changed in an udev rule, but after that rule is triggered the tail-end of the ivtv driver initialization can override that by selecting the tuner input. The correct sequence is to first setup the input, initial frequency and TV standard before finally registering the video devices. This prevents any udev rules from being triggered prematurely. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Negative speed values have to be allowed for reverse playback. Signed-off-by:
-
Hans Verkuil authored
ivtv_remove which is called by pci_unregister_driver was still using memory that was already freed. Ouch. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
VIDIOC_TRY_ENCODER_CMD did the same as VIDIOC_ENCODER_CMD, now it no longer touches the encoder. Both the encoder and decoder commands did not clear the flags field of unknown flags. Signed-off-by:
-
Hans Verkuil authored
Using v4l_printk_ioctl saves a lot of code duplication. Also moved a few ioctl cases to another function, improving the ioctl grouping. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Those two experimental APIs never worked fine nor, afaik, were implemented at the apps. Their functionalities were implemented by other means. So, let's remove those obsolete stuff. Signed-off-by:
-
Hans Verkuil authored
It is not immediately obvious why the ivtv symbols are exported in ivtv-driver.c since both ivtv-fb and the IR-blaster module are still out-of-tree, currently being ported to be in kernel. Added a comment so people are aware of these issues. Signed-off-by:
-
Hans Verkuil authored
Every file should include the headers containing the prototypes for its global functions. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
VIDEO_EVENT_VSYNC needs to tell the application which field it was that received a VSYNC (odd/even/progressive). The vsync_field was added to the union in video_event for this purpose. Signed-off-by:
-
Oliver Neukum authored
Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Oleg Nesterov authored
pp_cam_entry->cb_task need not to be _NOAUTOREL ... because in fact it is never used ??? Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Adrian Bunk authored
This patch fixes the following compile error with CONFIG_MODULES=n: CC drivers/media/video/saa7134/saa7134-core.o /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979:24: error: macro "request_submodules" passed 1 arguments, but takes just 0 /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c: In function 'saa7134_initdev': /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: 'request_submodules' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: for each function it appears in.) make[5]: *** [drivers/media/video/saa7134/saa7134-core.o] Error 1 Signed-off-by:
-
Trent Piepho authored
Some code to swap bytes wasn't using the swab16() function that the kernel provides for this. Make use of it, which results in more efficient code. Signed-off-by:
Antoine Jacquet <royale@zerezo.com> Signed-off-by:
-
Trent Piepho authored
Change some debug messages from printk() to dprintk(). Add KERN_WARNING and KERN_ERR level indicators to other printk()s that lacked them. Format printk lines with consistent ("%s/dvb: ", dev->name) prefix. Fixed dprintk macro, which had an if with no else that wasn't protected with a do {} while(0) block. That leads to "if(...) dprintk(); else" not doing what one would expect. Signed-off-by: -
Hans Verkuil authored
Signed-off-by:
-
Andrew Morton authored
drivers/media/video/ivtv/ivtv-i2c.c:547: warning: initializer-string for array of chars is too long drivers/media/video/ivtv/ivtv-i2c.c:547: warning: (near initialization for 'ivtv_i2c_client_template.name') Signed-off-by:
-
Dwaine P. Garden authored
-Add some missing Hauppauge and Belkin devices to the driver. -Fixed up some device descriptions. Signed-off-by:
Dwaine P. Garden <DwaineGarden@rogers.com> Signed-off-by:
Thierry MERLE <thierry.merle@free.fr> Signed-off-by:
-
Antoine Jacquet authored
Add a missing header to fix compilation issue in the zr364xx driver when CONFIG_VIDEO_V4L1 and CONFIG_VIDEO_V4L1_COMPAT are not set. Signed-off-by:
-
