- 12 Apr, 2023 1 commit
-
-
Stephen Boyd authored
Merge tag 'clk-imx-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx Pull i.MX clk driver updates from Abel Vesa: - Add clock generic devm_clk_hw_register_gate_parent_data. - Add audiomix block control for i.MX8MP. - Add support for determine_rate to composite-8m. - Add new macro for composite-8m to allow custom flags. - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate. - Provide clock name in error message for clk-gpr-mux on get parent failure. - Drop duplicate imx_clk_mux_flags macro. - Register the i.MX8MP Media Disp2 Pix clock as bus clock. - Add Media LDB root clock to i.MX8MP. - Make i.MX8MP nand_usdhc_bus clock as non-critical. - Fix the rate table for fracn-gppll. - Disable HW control for the fracn-gppll in order to be controlled by register write. - Add support for interger PLL in fracn-gppll. - Add mcore_booted module parameter to i.MX93 provider. - Add NIC, A55 and ARM PLL clocks to i.MX93. - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents. - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to get more accurate clock rates. - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical. - Update some of the critical clocks flags to allow glitchless on-the-fly rate change. * tag 'clk-imx-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux: (25 commits) clk: imx: imx8ulp: update clk flag for system critical clock clk: imx: imx8ulp: Add tpm5 clock as critical gate clock clk: imx: imx8ulp: keep MU0_B clock enabled always clk: imx: imx8ulp: Add divider closest support to get more accurate clock rate clk: imx: imx8ulp: Fix XBAR_DIVBUS and AD_SLOW clock parents clk: imx: imx93: Add nic and A55 clk dt-bindings: clock: imx93: add NIC, A55 and ARM PLL CLK clk: imx: imx93: add mcore_booted module paratemter clk: imx: fracn-gppll: Add 300MHz freq support for imx9 clk: imx: fracn-gppll: support integer pll clk: imx: fracn-gppll: disable hardware select control clk: imx: fracn-gppll: fix the rate table clk: imx: imx8mp: change the 'nand_usdhc_bus' clock to non-critical clk: imx: imx8mp: Add LDB root clock dt-bindings: clock: imx8mp: Add LDB clock entry clk: imx: imx8mp: correct DISP2 pixel clock type clk: imx: drop duplicated macro clk: imx: clk-gpr-mux: Provide clock name in error message clk: imx: Let IMX8MN_CLK_DISP_PIXEL set parent rate clk: imx8mm: Let IMX8MM_CLK_LCDIF_PIXEL set parent rate ...
-
- 09 Apr, 2023 16 commits
-
-
Jacky Bai authored
In order to support bus fabric clock frequency changed on the fly, need to update some bus clocks'flags to make sure these clocks'frequency and parent can be changed on the fly. For these clocks, HW can make sure no glitch will be introduced when changing on the fly. In order to support DDR DFS, the HW register bit for DDR_SEL and DDR_DIV clock will be modified by TF-A. So need to update these two clock's flag to make sure that the linux kernel side can correct these clocks' SW state to reflect the actual HW state. Reviewed-by:
Ye Li <ye.li@nxp.com> Signed-off-by:
Jacky Bai <ping.bai@nxp.com> Signed-off-by:
Peng Fan <peng.fan@nxp.com> Reviewed-by:
Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20230331063814.2462059-6-peng.fan@oss.nxp.comSigned-off-by:
-
Jacky Bai authored
The TPM5 is used for broadcast timer purpose and registered with TIMER_OF_DECLARE. As the clock driver is not ready at that stage, so the TPM5 clock is configured in bootloader(TF-A). if we just remove the TPM5 clock from linux will introduce a risk that the TPM5's parent clock will be gated, then lead to TPM's channel control config can NOT be written into register successfully. Due to the above reason, we still need to add the TPM5 clock into linux clock but register it as a simple critical gate clock to make sure its parent is always on. Reviewed-by:
-
Jacky Bai authored
Keep the A35<->M33 MU0_B clock enabled always for low power communication. Reviewed-by:
-
Jacky Bai authored
If a divider's parent clock has fractional part, it will hard to round out a more accurate clock rate for this divider, add the 'CLK_DIVIDER_ROUND_CLOSEST' flags for such divider to get a more accurate clock rate. Reviewed-by:
-
Peng Fan authored
XBAR_DIVBUS and AD_SLOW should set parent to XBAR_AD_DIVPLAT and XBAR_DIVBUS respectively, not the NIC_AD. otherwise we will get wrong clock rate. Fixes: c43a801a ("clk: imx: Add clock driver for imx8ulp") Reviewed-by:
-
Peng Fan authored
The A55 clock logic as below: A55_PLL ----------------->\ A55_SEL-->A55_CORE A55_CCM_ROOT--->A55_GATE->/ Add A55 CPU clk to support freq change. Add NIC CLK to reflect the clk status Signed-off-by: -
Peng Fan authored
Add i.MX93 NIC, A55 and ARM PLL CLK. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230403095300.3386988-7-peng.fan@oss.nxp.comSigned-off-by:
-
Peng Fan authored
Add mcore_booted boot parameter which could simplify AMP clock management. To i.MX93, there is CCM(clock control Module) to generate clock root clock, anatop(analog PLL module) to generate PLL, and LPCG (clock gating) to gate clocks to peripherals. As below: anatop->ccm->lpcg->peripheral Linux handles the clock management and the auxiliary core is under control of Linux. Although there is per hardware domain control for LPCG and CCM, auxiliary core normally only use LPCG hardware domain control to avoid linux gate off the clk to peripherals and leave CCM ana anatop to Linux. Reviewed-by:
-
Jacky Bai authored
Add 300MHz frequency config support on i.MX93 PLL. Reviewed-by:
-
Peng Fan authored
The fracn gppll could be configured in FRAC or INTEGER mode during hardware design. The current driver only support FRAC mode, while this patch introduces INTEGER support. When the PLL is INTEGER pll, there is no mfn, mfd, the calculation is as below: Fvco_clk = (Fref / DIV[RDIV] ) * DIV[MFI] Fclko_odiv = Fvco_clk / DIV[ODIV] In this patch, we reuse the FRAC pll logic with some condition check to simplify the driver Signed-off-by:
-
Peng Fan authored
When programming PLL, should disable Hardware control select to make PLL controlled by register, not hardware inputs through OSCPLL. Fixes: 1b26cb8a ("clk: imx: support fracn gppll") Signed-off-by:
-
Peng Fan authored
The Fvco should be range 2.4GHz to 5GHz, the original table voilate the spec, so update the table to fix it. Fixes: c196175a ("clk: imx: clk-fracn-gppll: Add more freq config for video pll") Fixes: 044034ef ("clk: imx: clk-fracn-gppll: fix mfd value") Fixes: 1b26cb8a ("clk: imx: support fracn gppll") Signed-off-by:
-
Haibo Chen authored
The 'nand_usdhc_bus' clock is only need to be enabled when usdhc or nand module is active, so change it to non-critical clock type. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Signed-off-by:
-
Liu Ying authored
This patch adds "media_ldb_root_clk" clock for the LDB in the MEDIAMIX subsystem. Reviewed-by:
Sandor Yu <Sandor.yu@nxp.com> Signed-off-by:
Liu Ying <victor.liu@nxp.com> Signed-off-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
-
Peng Fan authored
Add LDB clock entry for i.MX8MP Signed-off-by:
-
Peng Fan authored
The MEDIA_DISP2_CLK_ROOT use ccm_ahb_channel, it is bus type. Signed-off-by:
-
- 03 Apr, 2023 1 commit
-
-
Peng Fan authored
Drop duplicated macro definition Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
-
- 31 Mar, 2023 8 commits
-
-
Stefan Wahren authored
In error case the error message doesn't provide much context: imx:clk-gpr-mux: failed to get parent (-EINVAL) So additionally provide the clock name in the message, in order to simplify the further analyze. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
-
Adam Ford authored
By default the display pixel clock needs to be evenly divide down from the video_pll_out clock which rules out a significant number of resolution and refresh rates. The current clock tree looks something like: video_pll 594000000 video_pll_bypass 594000000 video_pll_out 594000000 disp_pixel 148500000 disp_pixel_clk 148500000 Now that composite-8m supports determine_rate, we can allow disp_pixel to set the parent rate which then switches every clock in the chain to a new frequency when disp_pixel cannot evenly divide from video_pll_out. Signed-off-by:Adam Ford <aford173@gmail.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Adam Ford authored
By default the display pixel clock needs to be evenly divide down from 594MHz which rules out a significant number of resolution and refresh rates. The current clock tree looks something like: video_pll1 594000000 video_pll1_bypass 594000000 video_pll1_out 594000000 lcdif_pixel 148500000 Now that composite-8m supports determine_rate, we can allow lcdif_pixel to set the parent rate which then switches every clock in the chain to a new frequency when lcdif_pixel cannot evenly divide from video_pll1_out. Signed-off-by: -
Adam Ford authored
In order to set custom flags to imx8m_clk_hw_composite, split it off into a separate macro which can accept additional flags. Signed-off-by:
-
Adam Ford authored
Similar to imx/clk-composite-93 and imx/clk-divider-gate, the imx8m_clk_composite_divider_ops can support determine_rate. Without this the parent clocks are set to a fixed value, and if a consumer needs a slower reate, the clock is divided, but the division is only as good as the parent clock rate. With this added, the system can attempt to adjust the parent rate if the proper flags are set which can lead to a more precise clock value. Signed-off-by:
-
Marek Vasut authored
Unlike the other block control IPs in i.MX8M, the audiomix is mostly a series of clock gates and muxes. Add DT bindings for this IP. Reviewed-by:
Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
Rob Herring <robh@kernel.org> Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit Tested-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
Marek Vasut <marex@denx.de> Tested-by:
Richard Leitner <richard.leitner@skidata.com> Signed-off-by:
-
Marek Vasut authored
Unlike the other block control IPs in i.MX8M, the audiomix is mostly a series of clock gates and muxes. Model it as a large static table of gates and muxes with one exception, which is the PLL14xx . The PLL14xx SAI PLL has to be registered separately. Reviewed-by:
Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by:
-
Marek Vasut authored
Add an API for clock gate that uses parent_data for the parent instead of a string parent_name. Reviewed-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
- 05 Mar, 2023 9 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit aa47a7c2 ("lib/cpumask: deprecate nr_cpumask_bits") resulted in the cpumask operations potentially becoming hugely less efficient, because suddenly the cpumask was always considered to be variable-sized. The optimization was then later added back in a limited form by commit 6f9c07be ("lib/cpumask: add FORCE_NR_CPUS config option"), but that FORCE_NR_CPUS option is not useful in a generic kernel and more of a special case for embedded situations with fixed hardware. Instead, just re-introduce the optimization, with some changes. Instead of depending on CPUMASK_OFFSTACK being false, and then always using the full constant cpumask width, this introduces three different cpumask "sizes": - the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids. This is used for situations where we should use the exact size. - the "small" size (small_cpumask_bits) is the NR_CPUS constant if it fits in a single word and the bitmap operations thus end up able to trigger the "small_const_nbits()" optimizations. This is used for the operations that have optimized single-word cases that get inlined, notably the bit find and scanning functions. - the "large" size (large_cpumask_bits) is the NR_CPUS constant if it is an sufficiently small constant that makes simple "copy" and "clear" operations more efficient. This is arbitrarily set at four words or less. As a an example of this situation, without this fixed size optimization, cpumask_clear() will generate code like movl nr_cpu_ids(%rip), %edx addq $63, %rdx shrq $3, %rdx andl $-8, %edx callq memset@PLT on x86-64, because it would calculate the "exact" number of longwords that need to be cleared. In contrast, with this patch, using a MAX_CPU of 64 (which is quite a reasonable value to use), the above becomes a single movq $0,cpumask instruction instead, because instead of caring to figure out exactly how many CPU's the system has, it just knows that the cpumask will be a single word and can just clear it all. Note that this does end up tightening the rules a bit from the original version in another way: operations that set bits in the cpumask are now limited to the actual nr_cpu_ids limit, whereas we used to do the nr_cpumask_bits thing almost everywhere in the cpumask code. But if you just clear bits, or scan for bits, we can use the simpler compile-time constants. In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()' which were not useful, and which fundamentally have to be limited to 'nr_cpu_ids'. Better remove them now than have somebody introduce use of them later. Of course, on x86-64 with MAXSMP there is no sane small compile-time constant for the cpumask sizes, and we end up using the actual CPU bits, and will generate the above kind of horrors regardless. Please don't use MAXSMP unless you really expect to have machines with thousands of cores. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "Fix a regression in the caam driver" * tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - Fix edesc/iv ordering mixup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 updates from Thomas Gleixner: "A small set of updates for x86: - Return -EIO instead of success when the certificate buffer for SEV guests is not large enough - Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared on return to userspace for performance reasons, but the leaves user space vulnerable to cross-thread attacks which STIBP prevents. Update the documentation accordingly" * tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: virt/sev-guest: Return -EIO if certificate buffer is not large enough Documentation/hw-vuln: Document the interaction between IBRS and STIBP x86/speculation: Allow enabling STIBP with legacy IBRS -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "A set of updates for the interrupt susbsystem: - Prevent possible NULL pointer derefences in irq_data_get_affinity_mask() and irq_domain_create_hierarchy() - Take the per device MSI lock before invoking code which relies on it being hold - Make sure that MSI descriptors are unreferenced before freeing them. This was overlooked when the platform MSI code was converted to use core infrastructure and results in a fals positive warning - Remove dead code in the MSI subsystem - Clarify the documentation for pci_msix_free_irq() - More kobj_type constification" * tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced genirq/msi: Drop dead domain name assignment irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy() genirq/irqdesc: Make kobj_type structures constant PCI/MSI: Clarify usage of pci_msix_free_irq() genirq/msi: Take the per-device MSI lock before validating the control structure genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask() -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs update from Al Viro: "Adding Christian Brauner as VFS co-maintainer" * tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Adding VFS co-maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VM_FAULT_RETRY fixes from Al Viro: "Some of the page fault handlers do not deal with the following case correctly: - handle_mm_fault() has returned VM_FAULT_RETRY - there is a pending fatal signal - fault had happened in kernel mode Correct action in such case is not "return unconditionally" - fatal signals are handled only upon return to userland and something like copy_to_user() would end up retrying the faulting instruction and triggering the same fault again and again. What we need to do in such case is to make the caller to treat that as failed uaccess attempt - handle exception if there is an exception handler for faulting instruction or oops if there isn't one. Over the years some architectures had been fixed and now are handling that case properly; some still do not. This series should fix the remaining ones. Status: - m68k, riscv, hexagon, parisc: tested/acked by maintainers. - alpha, sparc32, sparc64: tested locally - bug has been reproduced on the unpatched kernel and verified to be fixed by this series. - ia64, microblaze, nios2, openrisc: build, but otherwise completely untested" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: openrisc: fix livelock in uaccess nios2: fix livelock in uaccess microblaze: fix livelock in uaccess ia64: fix livelock in uaccess sparc: fix livelock in uaccess alpha: fix livelock in uaccess parisc: fix livelock in uaccess hexagon: fix livelock in uaccess riscv: fix livelock in uaccess m68k: fix livelock in uaccess -
Masahiro Yamada authored
include/linux/compiler-intel.h had no update in the past 3 years. We often forget about the third C compiler to build the kernel. For example, commit a0a12c3e ("asm goto: eradicate CC_HAS_ASM_GOTO") only mentioned GCC and Clang. init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC, and nobody has reported any issue. I guess the Intel Compiler support is broken, and nobody is caring about it. Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is deprecated: $ icc -v icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is deprecated and will be removed from product release in the second half of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended compiler moving forward. Please transition to use this compiler. Use '-diag-disable=10441' to disable this message. icc version 2021.7.0 (gcc version 12.1.0 compatibility) Arnd Bergmann provided a link to the article, "Intel C/C++ compilers complete adoption of LLVM". lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept untouched for better sync with https://github.com/facebook/zstd Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.htmlSigned-off-by:
Masahiro Yamada <masahiroy@kernel.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
-
Al Viro authored
Acked-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- 04 Mar, 2023 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: "Some improvements/fixes for the newly added GXP driver and a Kconfig dependency fix" * tag 'i2c-for-6.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: gxp: fix an error code in probe i2c: gxp: return proper error on address NACK i2c: gxp: remove "empty" switch statement i2c: Disable I2C_APPLE when I2C_PASEMI is a builtin
-
Linus Torvalds authored
The migration code ends up temporarily stashing information of the wrong type in unused fields of the newly allocated destination folio. That all works fine, but gcc does complain about the pointer type mis-use: mm/migrate.c: In function ‘__migrate_folio_extract’: mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’ 1050 | *anon_vmap = (void *)dst->mapping; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ and gcc is actually right to complain since it really doesn't understand that this is a very temporary special case where this is ok. This could be fixed in different ways by just obfuscating the assignment sufficiently that gcc doesn't see what is going on, but the truly "proper C" way to do this is by explicitly using a union. Using unions for type conversions like this is normally hugely ugly and syntactically nasty, but this really is one of the few cases where we want to make it clear that we're not doing type conversion, we're really re-using the value bit-for-bit just using another type. IOW, this should not become a common pattern, but in this one case using that odd union is probably the best way to document to the compiler what is conceptually going on here. [ Side note: there are valid cases where we convert pointers to other pointer types, notably the whole "folio vs page" situation, where the types actually have fundamental commonalities. The fact that the gcc note is limited to just randomized structures means that we don't see equivalent warnings for those cases, but it migth also mean that we miss other cases where we do play these kinds of dodgy games, and this kind of explicit conversion might be a good idea. ] I verified that at least for an allmodconfig build on x86-64, this generates the exact same code, apart from line numbers and assembler comment changes. Fixes: 64c8902e ("migrate_pages: split unmap_and_move() to _unmap() and _move()") Cc: Huang, Ying <ying.huang@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: -
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "17 hotfixes. Eight are for MM and seven are for other parts of the kernel. Seven are cc:stable and eight address post-6.3 issues or were judged unsuitable for -stable backporting" * tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: map Dikshita Agarwal's old address to his current one mailmap: map Vikash Garodia's old address to his current one fs/cramfs/inode.c: initialize file_ra_state fs: hfsplus: fix UAF issue in hfsplus_put_super panic: fix the panic_print NMI backtrace setting lib: parser: update documentation for match_NUMBER functions kasan, x86: don't rename memintrinsics in uninstrumented files kasan: test: fix test for new meminstrinsic instrumentation kasan: treat meminstrinsic as builtins in uninstrumented files kasan: emit different calls for instrumentable memintrinsics ocfs2: fix non-auto defrag path not working issue ocfs2: fix defrag path triggering jbd2 ASSERT mailmap: map Georgi Djakov's old Linaro address to his current one mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH mm/damon/paddr: fix missing folio_put() mm/mremap: fix dup_anon_vma() in vma_merge() case 4
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Drop orphaned VAS MAINTAINERS entry - Fix build errors with clang and KCSAN - Avoid build errors seen with LD_DEAD_CODE_DATA_ELIMINATION together with recordmcount Thanks to Nathan Chancellor. * tag 'powerpc-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Avoid dead code/data elimination when using recordmcount powerpc/vmlinux.lds: Add .text.asan/tsan sections powerpc: Drop orphaned VAS MAINTAINERS entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of various small fixes that have been gathered since the last PR. The majority of changes are for ASoC, and there is a small change in ASoC PCM core, but the rest are all for driver- specific fixes / quirks / updates" * tag 'sound-fix-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits) ALSA: ice1712: Delete unreachable code in aureon_add_controls() ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls() ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC ALSA: hda/realtek: Improve support for Dell Precision 3260 ASoC: mediatek: mt8195: add missing initialization ASoC: mediatek: mt8188: add missing initialization ASoC: amd: yc: Add DMI entries to support HP OMEN 16-n0xxx (8A43) ASoC: zl38060 add gpiolib dependency ASoC: sam9g20ek: Disable capture unless building with microphone input ASoC: mt8192: Fix range for sidetone positive gain ASoC: mt8192: Report an error if when an invalid sidetone gain is written ASoC: mt8192: Fix event generation for controls ASoC: mt8192: Remove spammy log messages ASoC: mchp-pdmc: fix poc noise at capture startup ASoC: dt-bindings: sama7g5-pdmc: add microchip,startup-delay-us binding ASoC: soc-pcm: add option to start DMA after DAI ASoC: mt8183: Fix event generation for I2S DAI operations ASoC: mt8183: Remove spammy logging from I2S DAI driver ASoC: mt6358: Remove undefined HPx Mux enumeration values ASoC: mt6358: Validate Wake on Voice 2 writes ...
-
