commit d7859905 upstream.

Add another Apple Cinema Display to the list of supported displays.
Signed-off-by: Alexander Theissen <alex.theissen@me.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2f2dde6b upstream.

Some lower volume SanDisk Ultra Flair in 16GB, which the VID:PID is
in 0781:5591, will aggressively request LPM of U1/U2 during runtime,
when using this thumb drive as the OS installation key we found the
device will generate failure during U1 exit path making it dropped
from the USB bus, this causes a corrupted installation in system at
the end.

i.e.,
[  166.918296] hub 2-0:1.0: state 7 ports 7 chg 0000 evt 0004
[  166.918327] usb usb2-port2: link state change
[  166.918337] usb usb2-port2: do warm reset
[  166.970039] usb usb2-port2: not warm reset yet, waiting 50ms
[  167.022040] usb usb2-port2: not warm reset yet, waiting 200ms
[  167.276043] usb usb2-port2: status 02c0, change 0041, 5.0 Gb/s
[  167.276050] usb 2-2: USB disconnect, device number 2
[  167.276058] usb 2-2: unregistering device
[  167.276060] usb 2-2: unregistering interface 2-2:1.0
[  167.276170] xhci_hcd 0000:00:15.0: shutdown urb ffffa3c7cc695cc0 ep1in-bulk
[  167.284055] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  167.284064] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 33 04 90 00 01 00 00
...

Analyzed the USB trace in the link layer we realized it is because
of the 6-ms timer of tRecoveryConfigurationTimeout which documented
on the USB 3.2 Revision 1.0, the section 7.5.10.4.2 of "Exit from
Recovery.Configuration"; device initiates U1 exit -> Recovery.Active
-> Recovery.Configuration, then the host timer timeout makes the link
transits to eSS.Inactive -> Rx.Detect follows by a Warm Reset.

Interestingly, the other higher volume of SanDisk Ultra Flair sharing
the same VID:PID, such as 64GB, would not request LPM during runtime,
it sticks at U0 always, thus disabling LPM does not affect those thumb
drives at all.

The same odd occures in SanDisk Ultra Fit 16GB, VID:PID in 0781:5583.
Signed-off-by: Harry Pan <harry.pan@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 400e2249 ]

Commit 63f53dea ("mm: warn about allocations which stall for too
long") was a great step for reducing possibility of silent hang up
problem caused by memory allocation stalls.  But this commit reverts it,
for it is possible to trigger OOM lockup and/or soft lockups when many
threads concurrently called warn_alloc() (in order to warn about memory
allocation stalls) due to current implementation of printk(), and it is
difficult to obtain useful information due to limitation of synchronous
warning approach.

Current printk() implementation flushes all pending logs using the
context of a thread which called console_unlock().  printk() should be
able to flush all pending logs eventually unless somebody continues
appending to printk() buffer.

Since warn_alloc() started appending to printk() buffer while waiting
for oom_kill_process() to make forward progress when oom_kill_process()
is processing pending logs, it became possible for warn_alloc() to force
oom_kill_process() loop inside printk().  As a result, warn_alloc()
significantly increased possibility of preventing oom_kill_process()
from making forward progress.

---------- Pseudo code start ----------
Before warn_alloc() was introduced:

  retry:
    if (mutex_trylock(&oom_lock)) {
      while (atomic_read(&printk_pending_logs) > 0) {
        atomic_dec(&printk_pending_logs);
        print_one_log();
      }
      // Send SIGKILL here.
      mutex_unlock(&oom_lock)
    }
    goto retry;

After warn_alloc() was introduced:

  retry:
    if (mutex_trylock(&oom_lock)) {
      while (atomic_read(&printk_pending_logs) > 0) {
        atomic_dec(&printk_pending_logs);
        print_one_log();
      }
      // Send SIGKILL here.
      mutex_unlock(&oom_lock)
    } else if (waited_for_10seconds()) {
      atomic_inc(&printk_pending_logs);
    }
    goto retry;
---------- Pseudo code end ----------

Although waited_for_10seconds() becomes true once per 10 seconds,
unbounded number of threads can call waited_for_10seconds() at the same
time.  Also, since threads doing waited_for_10seconds() keep doing
almost busy loop, the thread doing print_one_log() can use little CPU
resource.  Therefore, this situation can be simplified like

---------- Pseudo code start ----------
  retry:
    if (mutex_trylock(&oom_lock)) {
      while (atomic_read(&printk_pending_logs) > 0) {
        atomic_dec(&printk_pending_logs);
        print_one_log();
      }
      // Send SIGKILL here.
      mutex_unlock(&oom_lock)
    } else {
      atomic_inc(&printk_pending_logs);
    }
    goto retry;
---------- Pseudo code end ----------

when printk() is called faster than print_one_log() can process a log.

One of possible mitigation would be to introduce a new lock in order to
make sure that no other series of printk() (either oom_kill_process() or
warn_alloc()) can append to printk() buffer when one series of printk()
(either oom_kill_process() or warn_alloc()) is already in progress.

Such serialization will also help obtaining kernel messages in readable
form.

---------- Pseudo code start ----------
  retry:
    if (mutex_trylock(&oom_lock)) {
      mutex_lock(&oom_printk_lock);
      while (atomic_read(&printk_pending_logs) > 0) {
        atomic_dec(&printk_pending_logs);
        print_one_log();
      }
      // Send SIGKILL here.
      mutex_unlock(&oom_printk_lock);
      mutex_unlock(&oom_lock)
    } else {
      if (mutex_trylock(&oom_printk_lock)) {
        atomic_inc(&printk_pending_logs);
        mutex_unlock(&oom_printk_lock);
      }
    }
    goto retry;
---------- Pseudo code end ----------

But this commit does not go that direction, for we don't want to
introduce a new lock dependency, and we unlikely be able to obtain
useful information even if we serialized oom_kill_process() and
warn_alloc().

Synchronous approach is prone to unexpected results (e.g.  too late [1],
too frequent [2], overlooked [3]).  As far as I know, warn_alloc() never
helped with providing information other than "something is going wrong".
I want to consider asynchronous approach which can obtain information
during stalls with possibly relevant threads (e.g.  the owner of
oom_lock and kswapd-like threads) and serve as a trigger for actions
(e.g.  turn on/off tracepoints, ask libvirt daemon to take a memory dump
of stalling KVM guest for diagnostic purpose).

This commit temporarily loses ability to report e.g.  OOM lockup due to
unable to invoke the OOM killer due to !__GFP_FS allocation request.
But asynchronous approach will be able to detect such situation and emit
warning.  Thus, let's remove warn_alloc().

[1] https://bugzilla.kernel.org/show_bug.cgi?id=192981
[2] http://lkml.kernel.org/r/CAM_iQpWuPVGc2ky8M-9yukECtS+zKjiDasNymX7rMcBjBFyM_A@mail.gmail.com
[3] commit db73ee0d ("mm, vmscan: do not loop on too_many_isolated for ever"))

Link: http://lkml.kernel.org/r/1509017339-4802-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Reported-by: yuwang.yuwang <yuwang.yuwang@alibaba-inc.com>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c44c749d ]

of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place doesn't do that, so fix it.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5ed9dc99 ]

team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin()
will send multicast join group message to notify peers. We should do this when
enabling/changed to a new port. But it doesn't make sense to do it when a port
is disabled.

On the other hand, when we set mcast_rejoin_count to 2, and do a failover,
team_port_disable() will increase mcast_rejoin.count_pending to 2 and then
team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send
4 mcast rejoin messages at latest, which will make user confused. The same
with notify_peers.count.

Fix it by deleting team_notify_peers() and team_mcast_rejoin() in
team_port_disable().
Reported-by: Liang Li <liali@redhat.com>
Fixes: fc423ff0 ("team: add peer notification")
Fixes: 492b200e ("team: add support for sending multicast rejoins")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b7cdec3d ]

The wrong index is used when cleaning up RX buffer objects during release
of RX queues. Update to use the correct index counter.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bb21ce0a ]

rfc8435 says:

  For tight coupling, ffds_stateid provides the stateid to be used by
  the client to access the file.

However current implementation replaces per-mirror provided stateid with
by open or lock stateid.

Ensure that per-mirror stateid is used by ff_layout_write_prepare_v4 and
nfs4_ff_layout_prepare_ds.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 829383e1 ]

memunmap() should be used to free the return of memremap(), not
iounmap().

Fixes: dfddb969 ('iommu/vt-d: Switch from ioremap_cache to memremap')
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 426a593e ]

In the original ftmac100_interrupt(), the interrupts are only disabled when
the condition "netif_running(netdev)" is true. However, this condition
causes kerenl hang in the following case. When the user requests to
disable the network device, kernel will clear the bit __LINK_STATE_START
from the dev->state and then call the driver's ndo_stop function. Network
device interrupts are not blocked during this process. If an interrupt
occurs between clearing __LINK_STATE_START and stopping network device,
kernel cannot disable the interrupts due to the condition
"netif_running(netdev)" in the ISR. Hence, kernel will hang due to the
continuous interruption of the network device.

In order to solve the above problem, the interrupts of the network device
should always be disabled in the ISR without being restricted by the
condition "netif_running(netdev)".

[V2]
Remove unnecessary curly braces.
Signed-off-by: Vincent Chen <vincentc@andestech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit eb62cca9 ]

The getter callers doesn't know the valid Physical Queues (PQ) values.
This patch makes sure that a valid PQ will always be returned.

The patch consists of 3 fixes:

 - When qed_init_qm_get_idx_from_flags() receives a disabled flag, it
   returned PQ 0, which can potentially be another function's pq. Verify
   that flag is enabled, otherwise return default start_pq.

 - When qed_init_qm_get_idx_from_flags() receives an unknown flag, it
   returned NULL and could lead to a segmentation fault. Return default
   start_pq instead.

 - A modulo operation was added to MCOS/VFS PQ getters to make sure the
   PQ returned is in range of the required flag.

Fixes: b5a9ee7c ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 276d43f0 ]

Fix the condition which verifies that only one flag is set. The API
bitmap_weight() should receive size in bits instead of bytes.

Fixes: b5a9ee7c ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a6a66f80 ]

The current Cadence QSPI driver caused a kernel panic sporadically
when writing to QSPI. The problem was caused by writing more bytes
than needed because the QSPI operated on 4 bytes at a time.
<snip>
[   11.202044] Unable to handle kernel paging request at virtual address bffd3000
[   11.209254] pgd = e463054d
[   11.211948] [bffd3000] *pgd=2fffb811, *pte=00000000, *ppte=00000000
[   11.218202] Internal error: Oops: 7 [#1] SMP ARM
[   11.222797] Modules linked in:
[   11.225844] CPU: 1 PID: 1317 Comm: systemd-hwdb Not tainted 4.17.7-d0c45cd44a8f
[   11.235796] Hardware name: Altera SOCFPGA Arria10
[   11.240487] PC is at __raw_writesl+0x70/0xd4
[   11.244741] LR is at cqspi_write+0x1a0/0x2cc
</snip>
On a page boundary limit the number of bytes copied from the tx buffer
to remain within the page.

This patch uses a temporary buffer to hold the 4 bytes to write and then
copies only the bytes required from the tx buffer.
Reported-by: Adrian Amborzewicz <adrian.ambrozewicz@intel.com>
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 12d43aac ]

Cirque Touchpad/Pointstick combo is similar to Alps devices, it requires
MT_CLS_WIN_8_DUAL to expose its pointstick as a mouse.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 33bf5519 ]

PAGE_READ is used by RISC-V arch code included through mm headers,
and it makes sense to bring in a prefix on these in the driver.

drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined
 #define PAGE_READ   0x2
In file included from include/linux/memremap.h:7,
                 from include/linux/mm.h:27,
                 from include/linux/scatterlist.h:8,
                 from include/linux/dma-mapping.h:11,
                 from drivers/mtd/nand/raw/qcom_nandc.c:17:
arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition

Caught by riscv allmodconfig.
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bff466ba ]

Commit 3edfb7bd ("gpiolib: Show correct direction from the
beginning") fixed an existing issue but broke libgpiod tests by
changing the default direction of dummy lines to output.

We don't break user-space so make gpio-mockup behave as before.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a463146e ]

UBSAN: Undefined behavior in
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29
signed integer overflow: 1802201963 + 1802201963 cannot be represented
in type 'int'

The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors
granting of reserved resources. The grant operation is calculated and
protected, thus both members of the union cannot be negative.  Changed
type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed
int to unsigned int, allowing large value.

Fixes: 5a0d0a61 ("mlx4: Structures and init/teardown for VF resource quotas")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3ea7e7ea ]

Initialize the uid variable to zero to avoid the compilation warning.

Fixes: 7a89399f ("net/mlx4: Add mlx4_bitmap zone allocator")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bd85fbc2 ]

When re-registering a user mr, the mpt information for the
existing mr when running SRIOV is obtained via the QUERY_MPT
fw command. The returned information includes the mpt's lkey.

This retrieved mpt information is used to move the mpt back
to hardware ownership in the rereg flow (via the SW2HW_MPT
fw command when running SRIOV).

The fw API spec states that for SW2HW_MPT, the lkey field
must be zero. Any ConnectX-3 PF driver which checks for strict spec
adherence will return failure for SW2HW_MPT if the lkey field is not
zero (although the fw in practice ignores this field for SW2HW_MPT).

Thus, in order to conform to the fw API spec, set the lkey field to zero
before invoking SW2HW_MPT when running SRIOV.

Fixes: e630664c ("mlx4_core: Add helper functions to support MR re-registration")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a9c85903 ]

This reverts commit b4194da3f9087dd38d91b40f9bec42d59ce589a8
since it causes list corruption followed by kernel panic:

Workqueue: adb ffs_aio_cancel_worker
RIP: 0010:__list_add_valid+0x4d/0x70
Call Trace:
insert_work+0x47/0xb0
__queue_work+0xf6/0x400
queue_work_on+0x65/0x70
dwc3_gadget_giveback+0x44/0x50 [dwc3]
dwc3_gadget_ep_dequeue+0x83/0x2d0 [dwc3]
? finish_wait+0x80/0x80
usb_ep_dequeue+0x1e/0x90
process_one_work+0x18c/0x3b0
worker_thread+0x3c/0x390
? process_one_work+0x3b0/0x3b0
kthread+0x11e/0x140
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x3a/0x50

This issue is seen with warm reboot stability testing.
Signed-off-by: Shen Jing <jingx.shen@intel.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ed4eac20 ]

The value of "sb_index" is written by the hardware. Reading its value and
writing it to "index" must finish before checking the loop condition.
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9aaa4e8b ]

Release PTT before entering error flow.
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 77e461d1 ]

Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW
uses this channel for DMAE operations (e.g., TIME_SYNC implementation).
Driver also uses the same channel 0 for DMAE operations for some of the PFs
(e.g., PF0 on Port0). This could lead to concurrent access to the DMAE
channel by FW and driver which is not legal. Hence need to assign unique
DMAE id for FW.
Currently following DMAE channels are used by the clients,
  MFW - OCBB/OCSD functionality uses DMAE channel 14/15
  Driver 0-3 and 8-11 (for PF dmae operations)
         4 and 12 (for stats requests)
Assigning unique dmae_id '13' to the FW.

Changes from previous version:
------------------------------
v2: Incorporated the review comments.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ab99be46 ]

This register should have been programmed with the physical address
of the memory location containing the shadow tail pointer for
the guest virtual APIC log instead of the base address.

Fixes: 8bda0cfb  ('iommu/amd: Detect and initialize guest vAPIC log')
Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Wei Wang <wawei@amazon.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d7d8bbb4 ]

The complete size ("total_size") of the fragmented packet is stored in the
fragment header and in the size of the fragment chain. When the fragments
are ready for merge, the skbuff's tail of the first fragment is expanded to
have enough room after the data pointer for at least total_size. This means
that it gets expanded by total_size - first_skb->len.

But this is ignoring the fact that after expanding the buffer, the fragment
header is pulled by from this buffer. Assuming that the tailroom of the
buffer was already 0, the buffer after the data pointer of the skbuff is
now only total_size - len(fragment_header) large. When the merge function
is then processing the remaining fragments, the code to copy the data over
to the merged skbuff will cause an skb_over_panic when it tries to actually
put enough data to fill the total_size bytes of the packet.

The size of the skb_pull must therefore also be taken into account when the
buffer's tailroom is expanded.

Fixes: 610bfc6b ("batman-adv: Receive fragmented packets and merge")
Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Co-authored-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f4156f96 ]

The announcement messages of batman-adv COMPAT_VERSION 15 have the
possibility to announce additional information via a dynamic TVLV part.
This part is optional for the ELP packets and currently not parsed by the
Linux implementation. Still out-of-tree versions are using it to transport
things like neighbor hashes to optimize the rebroadcast behavior.

Since the ELP broadcast packets are smaller than the minimal ethernet
packet, it often has to be padded. This is often done (as specified in
RFC894) with octets of zero and thus work perfectly fine with the TVLV
part (making it a zero length and thus empty). But not all ethernet
compatible hardware seems to follow this advice. To avoid ambiguous
situations when parsing the TVLV header, just force the 4 bytes (TVLV
length + padding) after the required ELP header to zero.

Fixes: d6f94d91 ("batman-adv: ELP - adding basic infrastructure")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0fd79184 ]

The Motorola/Zebra Symbol DS4308-HD is a handheld USB barcode scanner
which does not have a battery, but reports one anyway that always has
capacity 2.

Let's apply the IGNORE quirk to prevent it from being treated like a
power supply so that userspaces don't get confused that this
accessory is almost out of power and warn the user that they need to charge
their wired barcode scanner.

Reported here: https://bugs.chromium.org/p/chromium/issues/detail?id=804720Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8bb0a886 ]

In the case where eq->fw->size > PAGE_SIZE the error return rc
is being set to EINVAL however this is being overwritten to
rc = req->fw->size because the error exit path via label 'out' is
not being taken.  Fix this by adding the jump to the error exit
path 'out'.

Detected by CoverityScan, CID#1453465 ("Unused value")

Fixes: c92316bf ("test_firmware: add batched firmware tests")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 68c8d209 ]

Assigning 2 to "renesas,can-clock-select" tricks the driver into
registering the CAN interface, even though we don't want that.
This patch improves one of the checks to prevent that from happening.

Fixes: 862e2b6a ("can: rcar_can: support all input clocks")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e5b78f2e ]

If iommu_ops.add_device() fails, iommu_ops.domain_free() is still
called, leading to a crash, as the domain was only partially
initialized:

    ipmmu-vmsa e67b0000.mmu: Cannot accommodate DMA translation for IOMMU page tables
    sata_rcar ee300000.sata: Unable to initialize IPMMU context
    iommu: Failed to add device ee300000.sata to group 0: -22
    Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
    ...
    Call trace:
     ipmmu_domain_free+0x1c/0xa0
     iommu_group_release+0x48/0x68
     kobject_put+0x74/0xe8
     kobject_del.part.0+0x3c/0x50
     kobject_put+0x60/0xe8
     iommu_group_get_for_dev+0xa8/0x1f0
     ipmmu_add_device+0x1c/0x40
     of_iommu_configure+0x118/0x190

Fix this by checking if the domain's context already exists, before
trying to destroy it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Fixes: d25a2a16 ('iommu: Add driver for Renesas VMSA-compatible IPMMU')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3401d42c ]

Previous commit /adding/ support for 160 MHz chanspecs was incomplete.
It didn't set bandwidth info and didn't extract control channel info. As
the result it was also using uninitialized "sb" var.

This change has been tested for two chanspecs found to be reported by
some devices/firmwares:
1) 60/160 (0xee32)
   Before: chnum:50 control_ch_num:36
    After: chnum:50 control_ch_num:60
2) 120/160 (0xed72)
   Before: chnum:114 control_ch_num:100
    After: chnum:114 control_ch_num:120

Fixes: 330994e8 ("brcmfmac: fix for proper support of 160MHz bandwidth")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 19ed3e2d ]

When handling page request without pasid event, go to "no_pasid"
branch instead of "bad_req". Otherwise, a NULL pointer deference
will happen there.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Fixes: a222a7f0 'iommu/vt-d: Implement page request handling'
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 30efae3d ]

While there are issues related to object lifetime management, unregister the
media device first when the driver is being unbound. This is slightly
safer.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 29e270fc upstream.

Got below warning with gcc 8.2 compiler.

net/tipc/topsrv.c: In function ‘tipc_topsrv_start’:
net/tipc/topsrv.c:660:2: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
  strncpy(srv->name, name, strlen(name) + 1);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/topsrv.c:660:27: note: length computed here
  strncpy(srv->name, name, strlen(name) + 1);
                           ^~~~~~~~~~~~
So change it to correct length and use strscpy.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 11f71108 upstream.

passing the strlen() of the source string as the destination
length is pointless, and gcc-8 now warns about it:

drivers/net/ethernet/qlogic/qed/qed_debug.c: In function 'qed_grc_dump':
include/linux/string.h:253: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]

This changes qed_grc_dump_big_ram() to instead uses the length of
the destination buffer, and use strscpy() to guarantee nul-termination.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[fixed differently upstream, this is a work-around to resolve it for 4.14.y]

Yongqin reported that /proc/zoneinfo format is broken in 4.14
due to commit 7aaf7727 ("mm: don't show nr_indirectly_reclaimable
in /proc/vmstat")

Node 0, zone      DMA
  per-node stats
      nr_inactive_anon 403
      nr_active_anon 89123
      nr_inactive_file 128887
      nr_active_file 47377
      nr_unevictable 2053
      nr_slab_reclaimable 7510
      nr_slab_unreclaimable 10775
      nr_isolated_anon 0
      nr_isolated_file 0
      <...>
      nr_vmscan_write 0
      nr_vmscan_immediate_reclaim 0
      nr_dirtied   6022
      nr_written   5985
                   74240
      ^^^^^^^^^^
  pages free     131656

The problem is caused by the nr_indirectly_reclaimable counter,
which is hidden from the /proc/vmstat, but not from the
/proc/zoneinfo. Let's fix this inconsistency and hide the
counter from /proc/zoneinfo exactly as from /proc/vmstat.

BTW, in 4.19+ the counter has been renamed and exported by
the commit b29940c1 ("mm: rename and change semantics of
nr_indirectly_reclaimable_bytes"), so there is no such a problem
anymore.

Cc: <stable@vger.kernel.org> # 4.14.x-4.18.x
Fixes: 7aaf7727 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat")
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 10d7e9a9 upstream.

The sensor is all setup, bind, resetted, acked, etc... every single second.

That was the way to workaround a problem with the interrupt bouncing again and
again.

With the following changes, we fix all in one:

 - Do the setup, one time, at probe time

 - Add the IRQF_ONESHOT, ack the interrupt in the threaded handler

 - Remove the interrupt handler

 - Set the correct value for the LAG register

 - Remove all the irq_enabled stuff in the code as the interruption
   handling is fixed

 - Remove the 3ms delay

 - Reorder the initialization routine to be in the right order

It ends up to a nicer code and more efficient, the 3-5ms delay is removed from
the get_temp() path.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b424315a upstream.

The TEMP0_CFG configuration register contains different field to set up the
temperature controller. However in the code, nothing prevents a setup to
overwrite the previous one: eg. writing the hdak value overwrites the sensor
selection, the sensor selection overwrites the hdak value.

In order to prevent such thing, use a regmap-like mechanism by reading the
value before, set the corresponding bits and write the result.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1e11b014 upstream.

Hopefully, the function name can help to clarify the semantic of the operations
when writing in the register.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2d4fa7b4 upstream.

The threaded interrupt inspect the sensors structure to look in the temp
threshold field, but this field is read-only in all the code, except in the
probe function before the threaded interrupt is set. In other words there
is not race window in the threaded interrupt when reading the field value.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>