- 09 Mar, 2016 6 commits
-
-
Ander Conselvan de Oliveira authored
Change the type of intel_crtc_state->shared_dpll to be a pointer to a shared dpll. With this there is no need to first convert the id stored in the crtc state to a pointer in order to use it. It does introduce a bit of hassle on doing the opposite. The long term objective is to hide details about dpll ids behind the shared dpll interface. Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-5-git-send-email-ander.conselvan.de.oliveira@intel.com
-
Ander Conselvan de Oliveira authored
Make the code neater by splitting the code for platforms with fixed PLL to their own functions and splitting the logic for finding a shareable or unused pll from the logic for setting it up. Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-4-git-send-email-ander.conselvan.de.oliveira@intel.com
-
Ander Conselvan de Oliveira authored
No functional changes. Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-3-git-send-email-ander.conselvan.de.oliveira@intel.com
-
Ander Conselvan de Oliveira authored
Create the new file intel_dpll_mgr.c and move the shared dpll code to it. Follow up patches that reorganize pll handling will move more code there and tweak the interface. No functional changes. Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-2-git-send-email-ander.conselvan.de.oliveira@intel.com
-
Maarten Lankhorst authored
The raw watermark values are needed when planes are not part of the state, but this introduced a regression and possibly an overflow when merging the watermarks because invalid values may end up used. Solve this by calculating raw watermarks for all levels, and only setting non-zero values when the level is valid. Fixes the SNB warning: WARNING: CPU: 1 PID: 25405 at drivers/gpu/drm/i915/intel_pm.c:2580 ilk_program_watermarks+0x7b2/0x9d0 [i915]() WARN_ON(wm_lp != 1) Modules linked in: i915 drm_kms_helper drm bluetooth fuse iTCO_wdt iTCO_vendor_support syscopyarea sysfillrect sysimgblt fb_sys_fops tpm_tis mei_me e1000e snd_hda_codec_hdmi pcspkr tpm mei i2c_i801 lpc_ich snd_hda_codec snd_hda_core CPU: 1 PID: 25405 Comm: kms_universal_p Tainted: G U W 4.5.0-rc6apollolake+ #462 Hardware name: /DH67GD, BIOS BLH6710H.86A.0160.2012.1204.1156 12/04/2012 0000000000000000 ffff88009d42b918 ffffffff8143cfab ffff88009d42b960 ffffffffa0363580 ffff88009d42b950 ffffffff81082746 ffff8800b9a24928 ffff88009d42ba00 ffff88009d4a0000 0000000000000000 ffff88009d42ba6c Call Trace: [<ffffffff8143cfab>] dump_stack+0x4d/0x72 [<ffffffff81082746>] warn_slowpath_common+0x86/0xc0 [<ffffffff810827cc>] warn_slowpath_fmt+0x4c/0x50 [<ffffffffa0292862>] ilk_program_watermarks+0x7b2/0x9d0 [i915] [<ffffffffa0292cb7>] ilk_initial_watermarks+0x107/0x120 [i915] [<ffffffffa02feffa>] intel_pre_plane_update+0x12a/0x190 [i915] [<ffffffffa02ffb36>] intel_atomic_commit+0x546/0xd50 [i915] [<ffffffffa012c9e7>] drm_atomic_commit+0x37/0x60 [drm] [<ffffffffa0217361>] drm_atomic_helper_disable_plane+0xb1/0xf0 [drm_kms_helper] [<ffffffffa011cdb4>] __setplane_internal+0x184/0x280 [drm] [<ffffffffa012b57a>] ? drm_modeset_lock_all_ctx+0x9a/0xb0 [drm] [<ffffffffa012010f>] drm_mode_setplane+0x13f/0x1c0 [drm] [<ffffffffa0111b52>] drm_ioctl+0x142/0x590 [drm] [<ffffffffa011ffd0>] ? drm_plane_check_pixel_format+0x50/0x50 [drm] [<ffffffff811f2744>] ? mntput+0x24/0x40 [<ffffffff811d28d4>] ? __fput+0x194/0x200 [<ffffffffa012dec3>] drm_compat_ioctl+0x33/0x40 [drm] [<ffffffffa029e1c2>] i915_compat_ioctl+0x32/0x40 [i915] [<ffffffff81228d72>] compat_SyS_ioctl+0xc2/0x330 [<ffffffff810021d5>] ? exit_to_usermode_loop+0x95/0xb0 [<ffffffff81002d2e>] do_fast_syscall_32+0x9e/0x210 [<ffffffff8197faf2>] entry_SYSENTER_compat+0x52/0x70 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Testcase: kms_universal_plane Fixes: d81f04c5 ("drm/i915: Allow preservation of watermarks, v2.") Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/56DEA1FC.8080703@linux.intel.comReviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Jani Nikula authored
The DSI power domain was missing from BXT power well 1 definitions, failing to get the power well for DSI transcoders. As pipe A is in the same power well as DSI transcoders, the problem should only occur with pipes B and C. According to Ville, this is basically a nop since pw1 is under dmc control. But given that we still have this stuff defined here, it's clearly correct to include DSI here. Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Deepak M <m.deepak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457463656-29357-1-git-send-email-jani.nikula@intel.com
-
- 07 Mar, 2016 2 commits
-
-
Takashi Iwai authored
The recent commit [0bdf5a05: drm/i915: Add reverse mapping between port and intel_encoder] introduced a reverse mapping to retrieve intel_dig_port object from the port number. The code assumed that the port vs intel_dig_port are 1:1 mapping. But in reality, this was a too naive assumption. As Martin reported about the missing HDMI audio on his SNB machine, pre-HSW chips may have multiple intel_dig_port objects corresponding to the same port. Since we assign the mapping statically at the init time and the multiple objects override the map, it may not match with the actually enabled output. This patch tries to address the regression above. The reverse mapping is provided basically only for the audio callbacks, so now we set / clear the mapping dynamically at enabling and disabling HDMI/DP audio, so that we can always track the latest and correct object corresponding to the given port. Fixes: 0bdf5a05 ('drm/i915: Add reverse mapping between port and intel_encoder') Reported-and-tested-by:
Martin Kepplinger <martink@posteo.de> Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456324522-21591-1-git-send-email-tiwai@suse.de
-
Imre Deak authored
In commit 1e657ad7 we moved the last step of firmware initialization to skl_display_core_init(), where it will be run only during system resume, but not during driver loading. Since this init step needs to be done whenever we program the firmware fix this by moving the initialization to the end of intel_csr_load_program(). While at it simplify a bit csr_load_work_fn(). This issue prevented DC5/6 transitions, this change will re-enable those. v2: - remove debugging left-over and redundant comment in csr_load_work_fn() Fixes: 1e657ad7 ("drm/i915/gen9: Write dc state debugmask bits only once") CC: Mika Kuoppala <mika.kuoppala@intel.com> CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457121461-16729-1-git-send-email-imre.deak@intel.com
-
- 04 Mar, 2016 8 commits
-
-
Mika Kuoppala authored
With full-ppgtt, it takes the GPU an eon to traverse the entire 256PiB address space, causing a loop to be detected. Under the current scheme, if ACTHD walks off the end of a batch buffer and into an empty address space, we "never" detect the hang. If we always increment the score as the ACTHD is progressing then we will eventually timeout (after ~46.5s (31 * 1.5s) without advancing onto a new batch). To counter act this, increase the amount we reduce the score for good batches, so that only a series of almost-bad batches trigger a full reset. DoS detection suffers slightly but series of long running shader tests will benefit. Based on a patch from Chris Wilson. Testcase: igt/drv_hangman/hangcheck-unterminated Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1456930109-21532-1-git-send-email-mika.kuoppala@intel.com
-
Tomas Elf authored
GPU engine reset handshaking is something that is applicable to both full GPU reset and engine reset, which is something that is part of the upcoming TDR per-engine hang recovery patches. Break out the common engine reset request/unrequest code (originally written by Mika Kuoppala) for reuse later in the TDR enablement patch series. v2: correct indentation and drop unused returned value (Mika) v3: We have forcewake during reset so use *_FW reg access (Mika) Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Tomas Elf <tomas.elf@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> [Mika: Fixed format warning] Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456929984-16323-1-git-send-email-mika.kuoppala@intel.com
-
Ville Syrjälä authored
Supposedly we would want to get the PWM output as close as possible to the target, so let's round to closest. Cc: Jani Nikula <jani.nikula@linux.intel.com> Suggested-by:
Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456932138-14004-7-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Now that the mess with AUX clock divder rounding is sorted out and we have both cdclk and rawclk cached in dev_priv, we can clean up the .get_aux_clock_divider() functions a bit. The main thing here is just calling ilk_get_aux_clock_divider() from hsw_get_aux_clock_divider() except for the LPT:H special case. We could go further and call g4x_get_aux_clock_divider() from ilk_get_aux_clock_divider() for the PCH ports, but I'm sure Jani would object, so leave that be. While at it repeat the comment where the AUX clock comes from in ilk_get_aux_clock_divider(). Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456932138-14004-6-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Currently we assume that hrawclk is 200MHz on VLV/CHV. That should be true always, but just to avoid such asumptions we can read out the actual frequency from CCK. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456932138-14004-5-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
With the hrawclk frequency cached in dev_priv, we can simply use g4x_get_aux_clock_divider() for VLV/CHV. v2: Rebase due to IS_VALLYVIEW vs. IS_CHERRYVIEW split Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456932138-14004-4-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
g4x is the first platform with DP support, so let's name the relevant functions as g4x_ instead i9xx_ to avoid confusion. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456932138-14004-3-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Generalize rawclk handling by storing it in dev_priv. Presumably our hrawclk readout works at least for CTG and ELK since we've been using it for DP AUX on those platforms. There are no real docs anymore after configdb vanished, so the only reference is the public CTG GMCH spec. What bits are listed in that doc match our code. The ELK GMCH spec have no relevant details unfortunately. The PNV situation is less clear. Starting from commit aa17cdb4 ("drm/i915: initialize backlight max from VBT") we assume that the CTG/ELK hrawclk readout works for PNV as well. At least the results *seem* reasonable for one PNV machine (Lenovo Ideapad S10-3t). Sadly the PNV GMCH spec doesn't have the goods on the relevant register either. So let's keep assuming it works for PNV,ELK,CTG and read it out on those platforms. G33 also has hrawclk according to some notes in BSpec, but we don't actually need it for anything, so let's not even try to read it out there. v2: Rebase due to IS_VALLYVIEW vs. IS_CHERRYVIEW split Use KHz() all over, and kill off a few useless temp variables Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456932138-14004-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com>
-
- 03 Mar, 2016 9 commits
-
-
Tvrtko Ursulin authored
Looks like this code does not need to wait atomically since it otherwise takes the mutex. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457015805-23742-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
Tvrtko Ursulin authored
Currently the wait_for_atomic_us only allows for a jiffie timeout granularity which is not nice towards callers requesting small micro-second timeouts. Re-implement it so micro-second timeout granularity is really supported and not just in the name of the macro. This has another beneficial side effect that it improves "gem_latency -n 100" results by approximately 2.5% (throughput and latencies) and 3% (CPU usage). (Note this improvement is relative to not yet merged execlist lock uncontention patch which moves the CSB MMIO outside this lock.) It also shrinks some hot functions like fw_domains_get by a tiny 3%. v2: * Warn when used from non-atomic context (if possible). * Warn on too long atomic waits. v3: * Added comment explaining CONFIG_PREEMPT_COUNT. * Fixed pre-processor indentation. (Chris Wilson) v4: * Commit msg update (gem_latency) and rebase. v5: * Commit message re-wording. * Added comment about no need for double cond check. (Chris Wilson) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Tvrtko Ursulin authored
v2: Added a submenu based on an idea by Chris Wilson. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Tvrtko Ursulin authored
I do not see that this needs to be done atomically and up to one second is quite a long time to busy loop. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Tvrtko Ursulin authored
This is for callers who want micro-second precision but are not waiting from the atomic context. v2: * Fix atomic waits. (Dave Gordon) * Use USEC_PER_SEC and USEC_PER_MSEC. (Chris Wilson) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Deepak M authored
The MIPI clock calculations for the addtional clock are revised from B0 stepping onwards, the bit definitions have changed compared to old stepping. v2: Fixing compilation warning. v3: Retained the old Macros (Jani) Signed-off-by:
Deepak M <m.deepak@intel.com> Tested-by: Ramalingam C <ramalingam.c@intel.com> # BXT-T with Tianma panel Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455556437-29267-1-git-send-email-m.deepak@intel.com
-
Maarten Lankhorst authored
Only planes that are part of the state should be used for recalculating watermarks. For planes not part of the state the previous patch allows us to re-use the old values since they're calculated even for levels that are not actively used. Changes since v1: - Remove big if from intel_crtc_atomic_check. - Remove extra newline. - Remove memset in ilk_compute_pipe_wm. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456826842-32553-2-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com>
-
Maarten Lankhorst authored
As Paulo has noted we can help bisectability by separating computing watermarks on a noop in 2 separate commits. This patch no longer clears the crtc watermark state, but recalculates it completely. Regardless whether a level is used the full values for each level are calculated. If a level is invalid wm[level].enable is unset. Changes since v1: - Only call ilk_validate_wm_level when level <= usable_level. (Ville) Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/56D6D09E.5040007@linux.intel.comReviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com>
-
Maarten Lankhorst authored
This function returns an int, but when ilk_validate_pipe_wm fails it returns false, which is 0 (success). As a result invalid watermarks are applied, while they should have been rejected. Fix this by returning -EINVAL. Fixes: ed4a6a7c ("drm/i915: Add two-stage ILK-style watermark programming (v11)") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456918563-28696-1-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Matt Roper <matthew.d.roper@intel.com>
-
- 02 Mar, 2016 3 commits
-
-
Sagar Arun Kamble authored
This changes ensures device is active when frequency limits are changed. This is needed as we are writing to register RPNSWREQ in intel_set_rps. If not done, might lead to undesired errors like: [ 1965.189137] [drm:fw_domains_get] *ERROR* blitter: timed out waiting for forcewake ack to clear. v2: Added elaborate commit message. (Jani) Fixing RPM reference drop in early exit paths. (Ville) Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454951831-11778-1-git-send-email-sagar.a.kamble@intel.comSigned-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Tvrtko Ursulin authored
commit e5756c10 Author: Imre Deak <imre.deak@intel.com> Date: Fri Aug 14 18:43:30 2015 +0300 drm/i915/bxt: don't allow cached GEM mappings on A stepping Added an exception of disallowing snooping for Broxton A stepping hardware but userptr was still enabling it regardless. Move the check to HAS_SNOOP now that it is used from multiple call sites and use it. v2: Userptr cannot be supported when it cannot be coherent and generalize the code better. (Chris Wilson) v3: Make has_snoop true only when !has_llc. (Chris Wilson) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1456920631-34302-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
Maarten Lankhorst authored
This fixes the IGT test, which interprets unknown status as failed to acquire load detect pipe. Cc: Gabriel Feceoru <gabriel.feceoru@intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456848241-6431-1-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
- 01 Mar, 2016 12 commits
-
-
Imre Deak authored
Disabling the DC states when it's already disabled is a valid scenario, for example during HW state sanitization during driver loading and resuming or when DC states are disabled via the i915.enable_dc or disable_power_well option. CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456778945-5411-4-git-send-email-imre.deak@intel.com
-
Imre Deak authored
If power well support is disabled via the i915.disable_power_well module option we should never enable DC states. Currently we would enable DC states even in this case during system suspend, where we need to disable all power wells regardless of the disable_power_well option. CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456778945-5411-3-git-send-email-imre.deak@intel.com
-
Imre Deak authored
We can simplify the conditions selecting the target DC state during runtime by calculating the allowed DC states in advance during driver loading. This also makes it easier to disable DC states depending on the i915.disable_power_well module option, added in the next patch. v2: - Print a debug message if the requested max DC value was adjusted due to a platform limit. Also debug print the calculated mask value. (Patrik) CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456778945-5411-2-git-send-email-imre.deak@intel.com
-
Imre Deak authored
During system suspend we need to first disable power wells then unitialize the display core. In case power well support is disabled we did this in the wrong order, so fix this up. Fixes: d314cd43 ("drm/i915: fix handling of the disable_power_well module option") CC: stable@vger.kernel.org CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456778945-5411-1-git-send-email-imre.deak@intel.com
-
arun.siluvery@linux.intel.com authored
execute during context save/restore, good to have them in error state. v2: use wa_ctx->size and print only size values (Mika) v3: simplify conditions when recording and freeing object (Chris) v4: resolve checkpatch errors (Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456831476-10782-1-git-send-email-arun.siluvery@linux.intel.com
-
Ville Syrjälä authored
LPT/WPT-H are limited to max 180 MHz CRT dotclock. Most other platforms have a limit of 350 MHz. Supposedly gen3 and gen4 go up to 400 MHz. VLV is a bit special since the docs are poor. Supposedly the DAC would be good up to 355 MHz, but currently we limit the DPLL to 270 MHz, so we'll have to limit the port clock to the same unless we change the DPLL limits. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-7-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
Rather than assume the VGA dotclock is really the FDI based thing, let's read out the real thing via iclkip, and after readout it'll get to compare it with the FDI based number to make sure they're in sync. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-6-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
The reason for spcial casing 20MHz in the iclkip calculations is that it would overflow the 7 bit divisor value. Let's rewrite the special case to check for just that, and bump up auxdiv when needed. This makes the code work for freqeuencies close to but not exactly 20MHz. The real lower limit for auxdiv=0 is actually: 172800000/(0x7f+2)*64)=~20930 kHz, and below that we must resort to auxdiv=1. Actually this is all very theoretical since we limit the dotclock to min 25MHz with CRT on all platforms. 25Mhz is actually the documented limit in Bspec, so it seems we ought to never need to worry about the auxdiv=1 case. But no harm in having it. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-5-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
Instead of assuming we've correctly set up SPLL to run at 270Mhz for FDI, let's use the port_clock from pipe_config which should be what we want. This would catch problems if someone misconfigures SPLL for whatever reason. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-4-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
Currently we check if the encoder's idea of dotclock agrees with what we calculated based on the FDI parameters. We do this in the encoder .get_config() hooks, which isn't so nice in case the BIOS (or some other outside party) made a mess of the state and we're just trying to take over. So as a prep step to being able sanitize such a bogus state, move the the sanity check to just after we've read out the entire state. If we then need to sanitize a bad state, it should be easier to move the sanity check to occur after sanitation instead of before it. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-3-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
On HSW/BDW ddi_pll_sel is the actual register value. Let's dump it in hex so that people migth actually understand what it says. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
Instead of repopulatin the rotation_info struct for the fb every time we try to use the fb, we can just populate it once when creating the fb, and later we can just copy the pre-populate struct into the gtt_view. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1455569699-27905-10-git-send-email-ville.syrjala@linux.intel.com
-