- 11 May, 2012 1 commit
-
-
Olof Johansson authored
Merge tag 'omap-cleanup-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup2 Clean up to make it easier to add support for new SoCs. Note that these have a merge dependency to omap-devel-hwmod-for-v3.5 branch for the Makefile changes. By Paul Walmsley (37) and others via Tony Lindgren * tag 'omap-cleanup-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (55 commits) GPMC: add ECC control definitions ARM: OMAP2+: dmtimer: remove redundant sysconfig context restore ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx ARM: OMAP: AM35xx: remove redunant cpu_is checks for AM3505 ARM: OMAP2+: dma: Define dma capabilities register bitfields and use them. ARM: OMAP4: Reduce the static IO mapping ARM: All OMAP2PLUS machines use omap2 directory so just add one entry ARM: OMAP: dma: Make use of cpu_class_is_omap2() to avoid future patching. ARM: OMAP4: Remove un-used WakeupGen register defines. ARM: OMAP2+: Clean up wrapping multiple objects in Makefile ARM: OMAP4: Don't compile cm2xxx_3xxx.c for OMAP4 only builds. ARM: OMAP4: hwmod data: add DEBUGSS skeleton ARM: OMAP4: hwmod data: add PRCM and related IP blocks ARM: OMAP4: hwmod data: add System Control Module ARM: OMAP4: hwmod data: add the OCP-WP IP block ARM: OMAP4: hwmod data: add OCM RAM IP block ARM: OMAP4: hwmod data: add remaining USB-related IP blocks ARM: OMAP4: hwmod data: add some interconnect-related IP blocks ARM: OMAP4: hwmod data: add McASP ARM: OMAP4: hwmod data: add the Slimbus IP blocks ...
-
- 10 May, 2012 5 commits
-
-
Yegor Yefremov authored
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tarun Kanti DebBarma authored
Since hwmod framework now manages sysconfig context save/restore there is no more need to touch this register in driver. Hence, remove restore of sysconfig register in omap_timer_restore_context. This was causing incorrect context restore of sysconfig register. Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Kevin Hilman authored
Currently cpu_is_omap3517() actually detects any device in the AM35x family (3517 and no-SGX version 3505.) To make it more clear what is being detected, convert the names from 3517 to AM35xx. This adds a new soc_is_am35xx() which duplicates the cpu_is_omap3517(). In order to avoid cross-tree dependencies with clock-tree changes, cpu_is_omap3517() is left until the clock changes are merged, at which point cpu_is_omap3517() will be completely removed. Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com> Tested-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Kevin Hilman <khilman@ti.com> [tony@atomide.com: change to use soc_is_omap instead] Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Kevin Hilman authored
There are several checks for AM35x devices done using if (cpu_is_omap3517() || cpu_is_omap3505()) However, since the 3505 is just a 3517 without an SGX, the 3505 check is redundant because cpu_is_omap3517() will always be true whenever cpu_is_omap3505() is true. From <plat/cpu.h>: #define cpu_is_omap3505() (cpu_is_omap3517() && !omap3_has_sgx()) Therefore, remove the redunant 3505 checks. This helps move towards removal of SoC detection that depends on specific IP detection. Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com> Tested-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
Conflicts: arch/arm/mach-omap2/Makefile
-
- 08 May, 2012 9 commits
-
-
Tony Lindgren authored
-
Tony Lindgren authored
Merge branch 'for_3.5/omap_misc_cleanup' of git://gitorious.org/omap-sw-develoment/linux-omap-dev into cleanup-soc
-
R Sricharan authored
The system dma module has capabiities register indicating the support for descriptor loading, constant fill, etc. Use this instead of OMAP revision check to identify the features supported runtime. This avoids patching the code for feature SOCs which has those capabilities. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
-
Santosh Shilimkar authored
EMIF, GMPC and DMM driver can ioremap() the address space as part of driver intialisation and there is no need to have static IO mapping for them. Hence remove the un-used static IP space and let the respective drivers manage it as part if driver init. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
-
Santosh Shilimkar authored
All OMAP2PLUS arch based machines makes use of mach-omap2 directory. So just add one entry so that there is no need to patch this file for any OMAP2+ devices. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
-
Santosh Shilimkar authored
cpu_class_is_omap2() contains all OMAP2+ devices. So update the DMA code cpu checks accordingly so that there is no need to patch the file for any future OMAP2+ devices. In long run, all these attributes should come from hwmod dev_attr based on DMA IP version. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
-
Santosh Shilimkar authored
Current OMAP code doesn't use any of the OMAP_WKG_ENB_SECURE_* registers. So remove those defines. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
-
Santosh Shilimkar authored
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
-
Santosh Shilimkar authored
Since OMAP4 code base now makes use of OMAP4 specific PRCM functions, cm2xxx_3xxx.c need not be compiled for OMAP4 only builds. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com>
-
- 06 May, 2012 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes form Peter Anvin * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver x86, relocs: Remove an unused variable asm-generic: Use __BITS_PER_LONG in statfs.h x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "The big ones here are a memory leak we introduced in rc1, and a scheduling while atomic if the transid on disk doesn't match the transid we expected. This happens for corrupt blocks, or out of date disks. It also fixes up the ioctl definition for our ioctl to resolve logical inode numbers. The __u32 was a merging error and doesn't match what we ship in the progs." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: avoid sleeping in verify_parent_transid while atomic Btrfs: fix crash in scrub repair code when device is missing btrfs: Fix mismatching struct members in ioctl.h Btrfs: fix page leak when allocing extent buffers Btrfs: Add properly locking around add_root_to_dirty_list
-
Al Viro authored
Setting TIF_IA32 in load_aout_binary() used to be enough; these days TASK_SIZE is controlled by TIF_ADDR32 and that one doesn't get set there. Switch to use of set_personality_ia32()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Chris Mason authored
verify_parent_transid needs to lock the extent range to make sure no IO is underway, and so it can safely clear the uptodate bits if our checks fail. But, a few callers are using it with spinlocks held. Most of the time, the generation numbers are going to match, and we don't want to switch to a blocking lock just for the error case. This adds an atomic flag to verify_parent_transid, and changes it to return EAGAIN if it needs to block to properly verifiy things. Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
- 05 May, 2012 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alphaLinus Torvalds authored
Pull alpha fixes from Matt Turner: "My alpha tree is back up (after taking quite some time to get my GPG key signed). It contains just some simple fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: silence 'const' warning in sys_marvel.c alpha: include module.h to fix modpost on Tsunami alpha: properly define get/set_rtc_time on Marvel/SMP alpha: VGA_HOSE depends on VGA_CONSOLE
-
Jiri Slaby authored
The test in pdc_console_tty_close '!tty->count' was always wrong because tty->count is decremented after tty->ops->close is called and thus can never be zero. Hence the 'then' branch was never executed and the timer never deleted. This did not matter until commit 5dd5bc40 ("TTY: pdc_cons, use tty_port"). There we needed to set TTY in tty_port to NULL, but this never happened due to the bug above. So change the test to really trigger at the last close by changing the condition to 'tty->count == 1'. Well, the driver should not touch tty->count at all. It should use tty_port->count and count open count there itself. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-and-tested-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound sound fixes from Takashi Iwai: "As good as nothing exciting here; just a few trivial fixes for various ASoC stuff." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: omap-pcm: Free dma buffers in case of error. ASoC: s3c2412-i2s: Fix dai registration ASoC: wm8350: Don't use locally allocated codec struct ASoC: tlv312aic23: unbreak resume ASoC: bf5xx-ssm2602: Set DAI format ASoC: core: check of_property_count_strings failure ASoC: dt: sgtl5000.txt: Add description for 'reg' field ASoC: wm_hubs: Make sure we don't disable differential line outputs
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull an ACPI patch from Len Brown: "It fixes a D3 issue new in 3.4-rc1." By Lin Ming via Len Brown: * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: ACPI: Fix D3hot v D3cold confusion
-
Sasha Levin authored
Currently, we'll try mounting any device who's major device number is UNNAMED_MAJOR as NFS root. This would happen for non-NFS devices as well (such as 9p devices) but it wouldn't cause any issues since mounting the device as NFS would fail quickly and the code proceeded to doing the proper mount: [ 101.522716] VFS: Unable to mount root fs via NFS, trying floppy. [ 101.534499] VFS: Mounted root (9p filesystem) on device 0:18. Commit 6829a048102a ("NFS: Retry mounting NFSROOT") introduced retries when mounting NFS root, which means that now we don't immediately fail and instead it takes an additional 90+ seconds until we stop retrying, which has revealed the issue this patch fixes. This meant that it would take an additional 90 seconds to boot when we're not using a device type which gets detected in order before NFS. This patch modifies the NFS type check to require device type to be 'Root_NFS' instead of requiring the device to have an UNNAMED_MAJOR major. This makes boot process cleaner since we now won't go through the NFS mounting code at all when the device isn't an NFS root ("/dev/nfs"). Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Takashi Iwai authored
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/soundTakashi Iwai authored
ASoC: Updates for 3.4 Nothing terribly exciting here, a bunch of small and simple fixes scattered around the place.
-
Lin Ming authored
Before this patch, ACPI_STATE_D3 incorrectly referenced D3hot in some places, but D3cold in other places. After this patch, ACPI_STATE_D3 always means ACPI_STATE_D3_COLD; and all references to D3hot use ACPI_STATE_D3_HOT. ACPI's _PR3 method is used to enter both D3hot and D3cold states. What distinguishes D3hot from D3cold is the presence _PR3 (Power Resources for D3hot) If these resources are all ON, then the state is D3hot. If _PR3 is not present, or all _PR0 resources for the devices are OFF, then the state is D3cold. This patch applies after Linux-3.4-rc1. A future syntax cleanup may remove ACPI_STATE_D3 to emphasize that it always means ACPI_STATE_D3_COLD. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Greg Kroah-Hartman authored
Commit ec81aecb ("hfs: fix a potential buffer overflow") fixed a few potential buffer overflows in the hfs filesystem. But as Timo Warns pointed out, these changes also need to be made on the hfsplus filesystem as well. Reported-by: Timo Warns <warns@pre-sense.de> Acked-by: WANG Cong <amwang@redhat.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Sage Weil <sage@newdream.net> Cc: Eugene Teo <eteo@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dave Anderson <anderson@redhat.com> Cc: stable <stable@vger.kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 04 May, 2012 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtc: Fix possible null pointer dereference in rtc-mpc5121.c
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French. * git://git.samba.org/sfrench/cifs-2.6: fs/cifs: fix parsing of dfs referrals cifs: make sure we ignore the credentials= and cred= options [CIFS] Update cifs version to 1.78 cifs - check S_AUTOMOUNT in revalidate cifs: add missing initialization of server->req_lock cifs: don't cap ra_pages at the same level as default_backing_dev_info CIFS: Fix indentation in cifs_show_options
-
Dave Jones authored
Remove myself as cpufreq maintainer. x86 driver changes can go through the regular x86/ACPI trees. ARM driver changes through the ARM trees. cpufreq core changes are rare these days, and can just go to lkml/direct. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The normal read_seqcount_begin() function will wait for any current writers to exit their critical region by looping until the sequence count is even. That "wait for sequence count to stabilize" is the right thing to do if the read-locker will just retry the whole operation on contention: no point in doing a potentially expensive reader sequence if we know at the beginning that we'll just end up re-doing it all. HOWEVER. Some users don't actually retry the operation, but instead will abort and do the operation with proper locking. So the sequence count case may be the optimistic quick case, but in the presense of writers you may want to do full locking in order to guarantee forward progress. The prime example of this would be the RCU name lookup. And in that case, you may well be better off without the "retry early", and are in a rush to instead get to the failure handling. Thus this "raw" interface that just returns the sequence number without testing it - it just forces the low bit to zero so that read_seqcount_retry() will always fail such a "active concurrent writer" scenario. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
We really need to use a ACCESS_ONCE() on the sequence value read in __read_seqcount_begin(), because otherwise the compiler might end up reloading the value in between the test and the return of it. As a result, it might end up returning an odd value (which means that a write is in progress). If the reader is then fast enough that that odd value is still the current one when the read_seqcount_retry() is done, we might end up with a "successful" read sequence, even despite the concurrent write being active. In practice this probably never really happens - there just isn't anything else going on around the read of the sequence count, and the common case is that we end up having a read barrier immediately afterwards. So the code sequence in which gcc might decide to reaload from memory is small, and there's no reason to believe it would ever actually do the reload. But if the compiler ever were to decide to do so, it would be incredibly annoying to debug. Let's just make sure. Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yong Wang authored
So that the power button still wakes up the platform. Signed-off-by: Pierre Tardy <pierre.tardy@intel.com> Link: http://lkml.kernel.org/r/20120504210244.F2EA5A018B@akpm.mtv.corp.google.comTested-by: Kangkai Yin <kangkai.yin@intel.com> Tested-by: Yong Wang <yong.y.wang@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
-
Bjarke Istrup Pedersen authored
It seems that there was an error with the active_low = 1 for the LED, since it should be set to 0 (meaning that active is high, since 0 is false, hence the confusion. The wiki article about it confuses it, since it contradicts itself, regarding what turns on the LED. I have tested 3.4-rc2 on my net5501 with this patch, and it makes the LED behave correctly, where "none" turns it off, and "default-on" turns it on, when echoed onto the trigger "file" in /sys/class/leds. Signed-off-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org> Link: http://lkml.kernel.org/r/20120504210146.62186A018B@akpm.mtv.corp.google.com Cc: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
-
Stefan Behrens authored
Fix that when scrub tries to repair an I/O or checksum error and one of the devices containing the mirror is missing, it crashes in bio_add_page because the bdev is a NULL pointer for missing devices. Reported-by: Marco L. Crociani <marco.crociani@gmail.com> Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Alexander Block authored
Fix the size members of btrfs_ioctl_ino_path_args and btrfs_ioctl_logical_ino_args. The user space btrfs-progs utilities used __u64 and the kernel headers used __u32 before. Signed-off-by: Alexander Block <ablock84@googlemail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Josef Bacik authored
If we happen to alloc a extent buffer and then alloc a page and notice that page is already attached to an extent buffer, we will only unlock it and free our existing eb. Any pages currently attached to that eb will be properly freed, but we don't do the page_cache_release() on the page where we noticed the other extent buffer which can cause us to leak pages and I hope cause the weird issues we've been seeing in this area. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-