- 03 Feb, 2006 36 commits
-
-
Alan Cox authored
Breakage reported by Adrian Bunk Untested (no hardware) Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
INKERNEL is always defined HOST is never defined therefore RTA is also never defined Strip the relevant garbage out of the headers on this basis. Signed-off-by:
-
Marcelo Tosatti authored
Shrinks "struct dentry" from 128 bytes to 124 on x86, allowing 31 objects per slab instead of 30. Cc: John Levon <levon@movementarian.org> Cc: Philippe Elie <phil.el@wanadoo.fr> Signed-off-by:
-
Evgeniy Dushistov authored
This fixes the code like this: bh = sb_find_get_block (sb, tmp + j); if ((bh && DATA_BUFFER_USED(bh)) || tmp != fs32_to_cpu(sb, *p)) { retry = 1; brelse (bh); goto next1; } bforget (bh); sb_find_get_block() ordinarily returns a buffer_head with b_count>=2, and this code assume that in case if "b_count>1" buffer is used, so this caused infinite loop. (akpm: that is-the-buffer-busy code is incomprehensible. Good riddance. Use of block_truncate_page() seems sane). Signed-off-by:Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by:
-
Evgeniy Dushistov authored
"rm" command, on file system with "ufs1" type cause system hang up. This is, in fact, not so bad as it seems to be, because of after that in "kernel control path" there are 3-4 places which may cause "oops". So the first patch fix oopses, and the second patch fix "kernel hang up". "oops" appears because of reading of group's summary info partly wrong, and access to not first group's summary info cause "oops". Signed-off-by:
-
Andrew Morton authored
drivers/char/sx.c: In function `sx_set_real_termios': drivers/char/sx.c:934: warning: long unsigned int format, different type arg (arg 2) drivers/char/sx.c:961: warning: long unsigned int format, different type arg (arg 2) drivers/char/sx.c:976: warning: long unsigned int format, different type arg (arg 2) Signed-off-by:
-
Andrew Morton authored
fs/quota_v2.c: In function `v2_check_quota_file': fs/quota_v2.c:39: warning: int format, different type arg (arg 2) fs/quota_v2.c:39: warning: int format, different type arg (arg 3) Cc: Jan Kara <jack@ucw.cz> Signed-off-by:
-
Andrew Morton authored
drivers/parport/parport_serial.c: In function `parport_register': drivers/parport/parport_serial.c:334: warning: unsigned int format, different type arg (arg 3) Signed-off-by:
-
Vitaly Fertman authored
Signed-off-by:
Hans Reiser <reiser@namesys.com> Signed-off-by:
Vitaly Fertman <vitaly@namesys.com> Cc: <stable@kernel.org> Signed-off-by:
-
Adrian Bunk authored
Do not allow people to create configurations with CONFIG_BROKEN=y. The sole reason for CONFIG_BROKEN=y would be if you are working on fixing a broken driver, but in this case editing the Kconfig file is trivial. Never ever should a user enable CONFIG_BROKEN. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Randy Dunlap authored
Fix printk format warning: drivers/parport/probe.c:205: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Arnaud Giersch <arnaud.giersch@free.fr> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Andrew Morton authored
drivers/char/sx.c: In function `sx_set_real_termios': drivers/char/sx.c:934: warning: int format, long unsigned int arg (arg 2) drivers/char/sx.c:961: warning: unsigned int format, tcflag_t arg (arg 2) drivers/char/sx.c:976: warning: unsigned int format, tcflag_t arg (arg 2) Signed-off-by:
-
Steffen Klassert authored
Count the total number of packets with collisions during transmission in vp->stats.collisions. Signed-off-by:
Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by:
-
Zach Brown authored
I noticed that list.h init functions were evaluating macro arguments multiple times and thought it might be nice to protect the unsuspecting caller. Converting the macros to inline functions seems to reduce code size, too. A i386 defconfig build with gcc 3.3.3 from fc4: text data bss dec hex filename 3573148 565664 188828 4327640 4208d8 vmlinux.before 3572177 565664 188828 4326669 42050d vmlinux add/remove: 0/0 grow/shrink: 11/144 up/down: 88/-1016 (-928) There was no difference in checkstack output. Signed-off-by:
Zach Brown <zach.brown@oracle.com> Signed-off-by:
-
Alexey Dobriyan authored
"[PATCH] m68knommu: fix find_next_zero_bit in bitops.h" fixed a typo in m68knommu implementation of find_next_zero_bit(). grep(1) shows that cris, frv, h8300, v850 are also affected. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Signed-off-by:
-
Keith Owens authored
When one module exports a function symbol and another module uses that symbol then kallsyms shows the symbol twice. Once from the consumer with a type of 'U' and once from the provider with a type of 't' or 'T'. On most architectures, both entries have the same address so it does not matter which one is returned by kallsyms_lookup_name(). But on architectures with function descriptors, the 'U' entry points to the descriptor, not to the code body, which is not what we want. IA64 # grep -w qla2x00_remove_one /proc/kallsyms a000000208c25ef8 U qla2x00_remove_one [qla2300] <= descriptor a000000208bf44c0 t qla2x00_remove_one [qla2xxx] <= function body Tell kallsyms_lookup_name() to ignore type U entries in modules. Signed-off-by:
Keith Owens <kaos@sgi.com> Signed-off-by:
-
Cornelia Huck authored
Fix broken to_channelpath macro (fortunately worked in all current cases...). Signed-off-by:
Cornelia Huck <cohuck@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Patch 9ad11ab4 changes the type of the first argument of some compat syscalls from int to unsigned int. Add these changes to the s390 compat wrapper as well. Signed-off-by:
-
Heiko Carstens authored
Compile fix: add missing __raw_read* and __raw_write* defines to include/asm-s390/io.h. These are mandatory since patch c27a0d75 was merged. Signed-off-by:
-
Jan Glauber authored
Avoid visibility of kernel internal interface to user space. Signed-off-by:
Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by:
-
Stefan Weinhuber authored
The DASD extended error reporting is a facility that allows to get detailed information about certain problems in the DASD I/O. This information can be used to implement fail-over applications that can recover these problems. Signed-off-by:
Stefan Weinhuber <wein@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Thibaut VARENE authored
This patch adds missing initialization sequence, necessary to get the "Macintosh" version of AEC6280 cards to work in Linux. Without this patch, the driver hangs for several minutes trying to initialize the card and the kernel is left in an unstable state. This patch has been tested fine on ppc and i386. Signed-off-by:
Thibaut VARENE <varenet@parisc-linux.org> Acked-by:
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Martin Michlmayr authored
CC drivers/mtd/maps/dc21285.o drivers/mtd/maps/dc21285.c: In function `dc21285_copy_to_32': drivers/mtd/maps/dc21285.c:113: error: invalid lvalue in increment drivers/mtd/maps/dc21285.c: In function `dc21285_copy_to_16': drivers/mtd/maps/dc21285.c:124: error: invalid lvalue in increment drivers/mtd/maps/dc21285.c: In function `dc21285_copy_to_8': drivers/mtd/maps/dc21285.c:134: error: invalid lvalue in increment make[3]: *** [drivers/mtd/maps/dc21285.o] Error 1 Signed-off-by:
Martin Michlmayr <tbm@cyrius.com> Signed-off-by:
-
Akinobu Mita authored
Noticed by Rune Torgersen. Fix generic_fls64(). tcp_cubic is using fls64(). Signed-off-by:
Akinobu Mita <mita@miraclelinux.com> Signed-off-by:
-
Linas Vepstas authored
This patch is a cleanup/restructuring/clarification of the PCI error handling doc. It should look rather professional at this point. Signed-off-by:
Linas Vepstas <linas@austin.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Dave Jones authored
kernel/power/power.h:49: error: static declaration of 'pm_prepare_console' follows non-static declaration include/linux/suspend.h:46: error: previous declaration of 'pm_prepare_console' was here kernel/power/power.h:50: error: static declaration of 'pm_restore_console' follows non-static declaration include/linux/suspend.h:47: error: previous declaration of 'pm_restore_console' was here Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Ananth N Mavinakayanahalli authored
When two function-return probes are inserted on kfree()[1] and the second on say, sys_link()[2], and later [2] is unregistered, we have a deadlock as kfree is called with the kretprobe_lock held and the function-return probe on kfree will also try to grab the same lock. However, we can move the kfree() during unregistration to outside the spinlock as we are sure that no instances from the free list will be used after synchronized_sched() returns during the unregistration process. Thanks to Masami Hiramatsu for spotting this. Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by:
-
Adrian Bunk authored
kernel/kprobes.c:353: warning: 'pre_handler_kretprobe' defined but not used Signed-off-by:
"Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Signed-off-by:
-
NeilBrown authored
Sometimes it doesn't so make the code more like the version-0 code which works. Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
- version-1 superblock + The default_bitmap_offset is in sectors, not bytes. + the 'size' field in the superblock is in sectors, not KB - raid0_run should return a negative number on error, not '1' - raid10_read_balance should not return a valid 'disk' number if ->rdev turned out to be NULL - kmem_cache_destroy doesn't like being passed a NULL. Signed-off-by: -
NeilBrown authored
mdu_array_info_t->size is 'int', which isn't big enough for the size (in KB of each component in) some arrays. So rather than a random overflow, set size to -1 when it cannot be set correctly. To update aspect on an array, userspace will sometimes: get_array_info change one field set_array_info in this case, we don't want the '-1' in 'size' to change to size, or look like a size change at all. So test for that in update_array_info. Signed-off-by:
-
Linas Vepstas authored
Edits to the driver-model documentation for grammar, clarity and content. These docs haven't been updated in years, and some of the technical content and discussion has become stale; this patch updates these. In addition, some of the language is awkward. Fix this. (I'm trying to cleanup the other files in this directory also, patches for these will come a bit later). Signed-off-by:
Patrick Mochel <mochel@digitalimplant.org> Signed-off-by:
-
Michal Ostrowski authored
Call "ld->receive_buf" using the start of the character and flag buffers, rather than the ends. Signed-off-by:
Michal Ostrowski <mostrows@watson.ibm.com> Acked-by:
-
Linus Torvalds authored
-
-
- 02 Feb, 2006 4 commits
-
-
Stefan Bader authored
This is a fix to the device-mapper-log-bitset-fix-endian patch that switched to ext2_* versions of the set and clear bit functions. The find_next_zero_bit function also has to be the ext2 one. Otherwise the mirror target tries to recover non-existent regions beyond the end of device. Signed-off-by:
Stefan Bader <shbader@de.ibm.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
NeilBrown authored
.. just as we already have for raid5. Signed-off-by:
-
NeilBrown authored
While a read-only array doesn't not really need a bitmap, we should not remove the bitmap when switching an array to read-only because a/ There is no code to re-add the bitmap which switching to read-write, b/ There is insufficient locking - the bitmap could be accessed while it is being removed. Cc: Reuben Farrelly <reuben-lkml@reub.net> Signed-off-by: -
NeilBrown authored
super_1_sync only updates fields in the superblock that might have changed. 'raid_disks' and 'size' could have changed, but this information doesn't get updated.... until this patch. Signed-off-by:
-
