- 03 Dec, 2016 29 commits
-
-
David S. Miller authored
Sargun Dhillon says: ==================== samples, bpf: Refactor; Add automated tests for cgroups These two patches are around refactoring out some old, reusable code from the existing test_current_task_under_cgroup_user test, and adding a new, automated test. There is some generic cgroupsv2 setup & cleanup code, given that most environment still don't have it setup by default. With this code, we're able to pretty easily add an automated test for future cgroupsv2 functionality. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Sargun Dhillon authored
This patch adds the sample program test_cgrp2_attach2. This program is similar to test_cgrp2_attach, but it performs automated testing of the cgroupv2 BPF attached filters. It runs the following checks: * Simple filter attachment * Application of filters to child cgroups * Overriding filters on child cgroups * Checking that this still works when the parent filter is removed The filters that are used here are simply allow all / deny all filters, so it isn't checking the actual functionality of the filters, but rather the behaviour around detachment / attachment. If net_cls is enabled, this test will fail. Signed-off-by:
Sargun Dhillon <sargun@sargun.me> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Sargun Dhillon authored
This patch modifies test_current_task_under_cgroup_user. The test has several helpers around creating a temporary environment for cgroup testing, and moving the current task around cgroups. This set of helpers can then be used in other tests. Signed-off-by:
-
Alexei Starovoitov authored
silence some of the clang compiler warnings like: include/linux/fs.h:2693:9: warning: comparison of unsigned enum expression < 0 is always false arch/x86/include/asm/processor.h:491:30: warning: taking address of packed member 'sp0' of class or structure 'x86_hw_tss' may result in an unaligned pointer value include/linux/cgroup-defs.h:326:16: warning: field 'cgrp' with variable sized type 'struct cgroup' not at the end of a struct or class is a GNU extension since they add too much noise to samples/bpf/ build. Signed-off-by:
-
Alexey Dobriyan authored
net_generic() function is both a) inline and b) used ~600 times. It has the following code inside ... ptr = ng->ptr[id - 1]; ... "id" is never compile time constant so compiler is forced to subtract 1. And those decrements or LEA [r32 - 1] instructions add up. We also start id'ing from 1 to catch bugs where pernet sybsystem id is not initialized and 0. This is quite pointless idea (nothing will work or immediate interference with first registered subsystem) in general but it hints what needs to be done for code size reduction. Namely, overlaying allocation of pointer array and fixed part of structure in the beginning and using usual base-0 addressing. Ids are just cookies, their exact values do not matter, so lets start with 3 on x86_64. Code size savings (oh boy): -4.2 KB As usual, ignore the initial compiler stupidity part of the table. add/remove: 0/0 grow/shrink: 12/670 up/down: 89/-4297 (-4208) function old new delta tipc_nametbl_insert_publ 1250 1270 +20 nlmclnt_lookup_host 686 703 +17 nfsd4_encode_fattr 5930 5941 +11 nfs_get_client 1050 1061 +11 register_pernet_operations 333 342 +9 tcf_mirred_init 843 849 +6 tcf_bpf_init 1143 1149 +6 gss_setup_upcall 990 994 +4 idmap_name_to_id 432 434 +2 ops_init 274 275 +1 nfsd_inject_forget_client 259 260 +1 nfs4_alloc_client 612 613 +1 tunnel_key_walker 164 163 -1 ... tipc_bcbase_select_primary 392 360 -32 mac80211_hwsim_new_radio 2808 2767 -41 ipip6_tunnel_ioctl 2228 2186 -42 tipc_bcast_rcv 715 672 -43 tipc_link_build_proto_msg 1140 1089 -51 nfsd4_lock 3851 3796 -55 tipc_mon_rcv 1012 956 -56 Total: Before=156643951, After=156639743, chg -0.00% Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
This is precursor to fixing "[id - 1]" bloat inside net_generic(). Name "s" is chosen to complement name "u" often used for dummy unions. Signed-off-by:
-
Alexey Dobriyan authored
Publishing net_generic pointer is done with silly mistake: new array is published BEFORE setting freshly acquired pernet subsystem pointer. memcpy rcu_assign_pointer kfree_rcu ng->ptr[id - 1] = data; This bug was introduced with commit dec827d1 ("[NETNS]: The generic per-net pointers.") in the glorious days of chopping networking stack into containers proper 8.5 years ago (whee...) How it didn't trigger for so long? Well, you need quite specific set of conditions: *) race window opens once per pernet subsystem addition (read: modprobe or boot) *) not every pernet subsystem is eligible (need ->id and ->size) *) not every pernet subsystem is vulnerable (need incorrect or absense of ordering of register_pernet_sybsys() and actually using net_generic()) *) to hide the bug even more, default is to preallocate 13 pointers which is actually quite a lot. You need IPv6, netfilter, bridging etc together loaded to trigger reallocation in the first place. Trimmed down config are OK. Signed-off-by:
-
Alexey Dobriyan authored
nla_ok() consists of 3 clauses: 1) int rem >= (int)sizeof(struct nlattr) 2) u16 nla_len >= sizeof(struct nlattr) 3) u16 nla_len <= int rem The statement is that clause (1) is redundant. What it does is ensuring that "rem" is a positive number, so that in clause (3) positive number will be compared to positive number with no problems. However, "u16" fully fits into "int" and integers do not change value when upcasting even to signed type. Negative integers will be rejected by clause (3) just fine. Small positive integers will be rejected by transitivity of comparison operator. NOTE: all of the above DOES NOT apply to nlmsg_ok() where ->nlmsg_len is u32(!), so 3 clauses AND A CAST TO INT are necessary. Obligatory space savings report: -1.6 KB $ ./scripts/bloat-o-meter ../vmlinux-000* ../vmlinux-001* add/remove: 0/0 grow/shrink: 3/63 up/down: 35/-1692 (-1657) function old new delta validate_scan_freqs 142 155 +13 tcf_em_tree_validate 867 879 +12 dcbnl_ieee_del 328 338 +10 netlbl_cipsov4_add_common.isra 218 215 -3 ... ovs_nla_put_actions 888 806 -82 netlbl_cipsov4_add_std 1648 1566 -82 nl80211_parse_sched_scan 2889 2780 -109 ip_tun_from_nlattr 3086 2945 -141 Signed-off-by:
-
Zhang Shengju authored
Since offset is zero, it's not necessary to use set function. Reset function is straightforward, and will remove the unnecessary add operation in set function. Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
-
Zhang Shengju authored
Since offset is zero, it's not necessary to use set function. Reset function is straightforward, and will remove the unnecessary add operation in set function. Signed-off-by:
-
Zhang Shengju authored
Since offset is zero, it's not necessary to use set function. Reset function is straightforward, and will remove the unnecessary add operation in set function. Signed-off-by:
-
Zhang Shengju authored
Since offset is zero, it's not necessary to use set function. Reset function is straightforward, and will remove the unnecessary add operation in set function. Signed-off-by:
-
Zhang Shengju authored
Since offset is zero, it's not necessary to use set function. Reset function is straightforward, and will remove the unnecessary add operation in set function. Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
David S. Miller authored
Iyappan Subramanian says: ==================== drivers: net: xgene: Add Jumbo and Pause frame support This patch set adds, 1. Jumbo frame support 2. Pause frame based flow control and fixes RSS for non-TCP/UDP packets. ==================== Signed-off-by:Iyappan Subramanian <isubramanian@apm.com>
-
Iyappan Subramanian authored
This patch adds get_pauseparam and set_pauseparam functions. Signed-off-by:
Quan Nguyen <qnguyen@apm.com> Signed-off-by:
-
Iyappan Subramanian authored
This patch adds flow control/pause frame initialization and advertising capabilities. Signed-off-by:
-
Iyappan Subramanian authored
This patch adds functions to configure mac, when flow control and pause frame settings change. Signed-off-by:
-
Iyappan Subramanian authored
This patch fixes RSS feature, for non-TCP/UDP packets. Signed-off-by:
Khuong Dinh <kdinh@apm.com> Signed-off-by:
-
Iyappan Subramanian authored
This patch implements ndo_change_mtu() callback function that enables mtu change. Signed-off-by:
-
Iyappan Subramanian authored
This patch adds support for jumbo frame, by allocating additional buffer (page) pool and configuring the hardware. Signed-off-by:
-
Iyappan Subramanian authored
This patch configures classifier with the pagepool information. Signed-off-by:
-
Iyappan Subramanian authored
This is a prepartion patch and adds xgene_enet_get_fpsel() helper function to get buffer pool number. Signed-off-by:
-
Paul Gortmaker authored
As of commit 8f32b909 ("net: ethernet: ti: davinci_cpdma: add set rate for a channel") the ARM allmodconfig builds would fail modpost with: ERROR: "cpdma_chan_set_weight" [drivers/net/ethernet/ti/ti_cpsw.ko] undefined! ERROR: "cpdma_chan_get_rate" [drivers/net/ethernet/ti/ti_cpsw.ko] undefined! ERROR: "cpdma_chan_get_min_rate" [drivers/net/ethernet/ti/ti_cpsw.ko] undefined! ERROR: "cpdma_chan_set_rate" [drivers/net/ethernet/ti/ti_cpsw.ko] undefined! Since these weren't declared as static, it is assumed they were meant to be shared outside the file, and that modular build testing was simply overlooked. Fixes: 8f32b909 ("net: ethernet: ti: davinci_cpdma: add set rate for a channel") Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: linux-omap@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.10-20161201' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2016-12-01 this is a pull request of 4 patches for net-next/master. There are two patches by Chris Paterson for the rcar_can and rcar_canfd device tree binding documentation. And a patch by Geert Uytterhoeven that corrects the order of interrupt specifiers. The fourth patch by Colin Ian King fixes a spelling error in the kvaser_usb driver. ==================== Signed-off-by:
-
LABBE Corentin authored
stmmac_mdio_{read|write} and stmmac_mdio_{read|write}_gmac4 are not enought different for being split. The only differences between thoses two functions are shift/mask for addr/reg/clk_csr. This patch introduce a per platform set of variable for setting thoses shift/mask and unify mdio read and write functions. Signed-off-by:Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
LABBE Corentin authored
This patch simply rename regValue to value, like it was named in other mdio functions. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Arnd Bergmann authored
As David Miller pointed out for for the previous patch, the whitespace in some functions looks rather odd. This was caused by commit 6329da5f ("obsolete config in kernel source: USE_INTERNAL_TIMER"), which removed some conditions but did not reindent the code. This fixes the indentation in the file and removes extraneous whitespace at the end of the lines and before tabs. There are many other minor coding style problems in the driver, but I'm not touching those here. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Pavel Machek authored
Fix english in documentation, make documentation match reality, remove options that were removed from code. Signed-off-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Couple conflicts resolved here: 1) In the MACB driver, a bug fix to properly initialize the RX tail pointer properly overlapped with some changes to support variable sized rings. 2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix overlapping with a reorganization of the driver to support ACPI, OF, as well as PCI variants of the chip. 3) In 'net' we had several probe error path bug fixes to the stmmac driver, meanwhile a lot of this code was cleaned up and reorganized in 'net-next'. 4) The cls_flower classifier obtained a helper function in 'net-next' called __fl_delete() and this overlapped with Daniel Borkamann's bug fix to use RCU for object destruction in 'net'. It also overlapped with Jiri's change to guard the rhashtable_remove_fast() call with a check against tc_skip_sw(). 5) In mlx4, a revert bug fix in 'net' overlapped with some unrelated changes in 'net-next'. 6) In geneve, a stale header pointer after pskb_expand_head() bug fix in 'net' overlapped with a large reorganization of the same code in 'net-next'. Since the 'net-next' code no longer had the bug in question, there was nothing to do other than to simply take the 'net-next' hunks. Signed-off-by:
-
- 02 Dec, 2016 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "This should be the last set of bugfixes for arm-soc in v4.9. None of these are critical regressions, but it would be nice to still get them merged. - On the Juno platform, the idle latency was described wrong, leading to suboptimal cpuidle tuning. - Also on the same platform, PCI I/O space was set up incorrectly and could not work. - On the sti platform, a syntactically incorrect DT entry caused warnings. - The newly added 'gr8' platform has somewhat confusing file names, which we rename for consistency" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions arm64: dts: juno: Correct PCI IO window ARM: dts: STiH407-family: fix i2c nodes ARM: gr8: Rename the DTSI and relevant DTS -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Lots more phydev and probe error path leaks in various drivers by Johan Hovold. 2) Fix race in packet_set_ring(), from Philip Pettersson. 3) Use after free in dccp_invalid_packet(), from Eric Dumazet. 4) Signnedness overflow in SO_{SND,RCV}BUFFORCE, also from Eric Dumazet. 5) When tunneling between ipv4 and ipv6 we can be left with the wrong skb->protocol value as we enter the IPSEC engine and this causes all kinds of problems. Set it before the output path does any dst_output() calls, from Eli Cooper. 6) bcmgenet uses wrong device struct pointer in DMA API calls, fix from Florian Fainelli. 7) Various netfilter nat bug fixes from FLorian Westphal. 8) Fix memory leak in ipvlan_link_new(), from Gao Feng. 9) Locking fixes, particularly wrt. socket lookups, in l2tp from Guillaume Nault. 10) Avoid invoking rhash teardowns in atomic context by moving netlink cb->done() dump completion from a worker thread. Fix from Herbert Xu. 11) Buffer refcount problems in tun and macvtap on errors, from Jason Wang. 12) We don't set Kconfig symbol DEFAULT_TCP_CONG properly when the user selects BBR. Fix from Julian Wollrath. 13) Fix deadlock in transmit path on altera TSE driver, from Lino Sanfilippo. 14) Fix unbalanced reference counting in dsa_switch_tree, from Nikita Yushchenko. 15) tc_tunnel_key needs to be properly exported to userspace via uapi, fix from Roi Dayan. 16) rds_tcp_init_net() doesn't unregister notifier in error path, fix from Sowmini Varadhan. 17) Stale packet header pointer access after pskb_expand_head() in genenve driver, fix from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits) net: avoid signed overflows for SO_{SND|RCV}BUFFORCE geneve: avoid use-after-free of skb->data tipc: check minimum bearer MTU net: renesas: ravb: unintialized return value sh_eth: remove unchecked interrupts for RZ/A1 net: bcmgenet: Utilize correct struct device for all DMA operations NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040 cdc_ether: Fix handling connection notification ip6_offload: check segs for NULL in ipv6_gso_segment. RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_net Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()" ipv6: Set skb->protocol properly for local output ipv4: Set skb->protocol properly for local output packet: fix race condition in packet_set_ring net: ethernet: altera: TSE: do not use tx queue lock in tx completion handler net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffers net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks net: ethernet: stmmac: platform: fix outdated function header net: ethernet: stmmac: dwmac-meson8b: fix probe error path net: ethernet: stmmac: dwmac-generic: fix probe error path ... -
Eric Dumazet authored
CAP_NET_ADMIN users should not be allowed to set negative sk_sndbuf or sk_rcvbuf values, as it can lead to various memory corruptions, crashes, OOM... Note that before commit 82981930 ("net: cleanups in sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF and SO_RCVBUF were vulnerable. This needs to be backported to all known linux kernels. Again, many thanks to syzkaller team for discovering this gem. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Sabrina Dubroca authored
geneve{,6}_build_skb can end up doing a pskb_expand_head(), which makes the ip_hdr(skb) reference we stashed earlier stale. Since it's only needed as an argument to ip_tunnel_ecn_encap(), move this directly in the function call. Fixes: 08399efc ("geneve: ensure ECN info is handled properly in all tx/rx paths") Signed-off-by:Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Michal Kubeček authored
Qian Zhang (张谦) reported a potential socket buffer overflow in tipc_msg_build() which is also known as CVE-2016-8632: due to insufficient checks, a buffer overflow can occur if MTU is too short for even tipc headers. As anyone can set device MTU in a user/net namespace, this issue can be abused by a regular user. As agreed in the discussion on Ben Hutchings' original patch, we should check the MTU at the moment a bearer is attached rather than for each processed packet. We also need to repeat the check when bearer MTU is adjusted to new device MTU. UDP case also needs a check to avoid overflow when calculating bearer MTU. Fixes: b97bf3fd ("[TIPC] Initial merge") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Reported-by:
Qian Zhang (张谦) <zhangqian-c@360.cn> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.9-20161201' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-12-02 this is a pull request for net/master. There are two patches by Stephane Grosjean, who adds support for the new PCAN-USB X6 USB interface to the pcan_usb driver. ==================== Signed-off-by:
-
Dan Carpenter authored
We want to set the other "err" variable here so that we can return it later. My version of GCC misses this issue but I caught it with a static checker. Fixes: 9f70eb33 ("net: ethernet: renesas: ravb: fix fixed-link phydev leaks") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2016-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.10 Major changes: rsi * filter rx frames * configure tx power * make it possible to select antenna * support 802.11d brcmfmac * cleanup of scheduled scan code * support for bcm43341 chipset with different chip id * support rev6 of PCIe device interface ath10k * add spectral scan support for QCA6174 and QCA9377 families * show used tx bitrate with 10.4 firmware wil6210 * add power save mode support * add abort scan functionality * add support settings retry limit for short frames bcma * add Dell Inspiron 3148 ==================== Signed-off-by:
-
Chris Brandt authored
When streaming a lot of data and the RZ/A1 can't keep up, some status bits will get set that are not being checked or cleared which cause the following messages and the Ethernet driver to stop working. This patch fixes that issue. irq 21: nobody cared (try booting with the "irqpoll" option) handlers: [<c036b71c>] sh_eth_interrupt Disabling IRQ #21 Fixes: db893473 ("sh_eth: Add support for r7s72100") Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Acked-by:
-
Florian Fainelli authored
__bcmgenet_tx_reclaim() and bcmgenet_free_rx_buffers() are not using the same struct device during unmap that was used for the map operation, which makes DMA-API debugging warn about it. Fix this by always using &priv->pdev->dev throughout the driver, using an identical device reference for all map/unmap calls. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Gregory CLEMENT says: ==================== Support Armada 37xx SoC (ARMv8 64-bits) in mvneta driver The Armada 37xx is a new ARMv8 SoC from Marvell using same network controller as the older Armada 370/38x/XP SoCs. This series adapts the driver in order to be able to use it on this new SoC. The main changes are: - 64-bits support: the first patches allow using the driver on a 64-bit architecture. - MBUS support: the mbus configuration is different on Armada 37xx from the older SoCs. - per cpu interrupt: Armada 37xx do not support per cpu interrupt for the NETA IP, the non-per-CPU behavior was added back. The first patch is an optimization in the rx path in swbm mode. The second patch remove unnecessary allocation for HWBM. The first item is solved by patches 4 and 5. The 2 last items are solved by patch 6. In patch 7 the dt support is added. Beside Armada 37xx, this series have been again tested on Armada XP and Armada 38x (with Hardware Buffer Management and with Software Buffer Management). This is the 6th version of the series: - 1st version: http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/469588.html - 2nd version: http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/470476.html - 3rd version: http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/470901.html - 4th version: http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/471039.html - 5th version: http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/471478.html Changelog: v5 -> v6: - Added Tested-by from Marcin Wojtas on the series - Added Reviewed-by from Jisheng Zhang on patch 3 - Fix eth1 phy mode for Armada 3720 DB board on patch 7 v4 -> v5: - remove unnecessary cast in patch 3 v3 -> v4: - Adding new patch: "net: mvneta: do not allocate buffer in rxq init with HWBM" - Simplify the HWBM case in patch 3 as suggested by Marcin v2 -> v3: - Adding patch 1 "Optimize rx path for small frame" - Fix the kbuild error by moving the "phys_addr += pp->rx_offset_correction;" line from patch 2 to patch 3 where rx_offset_correction is introduced. - Move the memory allocation of the buf_virt_addr of the rxq to be called by the probe function in order to avoid a memory leak. ==================== Signed-off-by:
-
