- 21 Oct, 2020 3 commits
-
-
Chris Wilson authored
If i915.ko is being used as a passthrough device, it does not know if the host is using intel_iommu. Mixing the iommu and gfx causes a few issues (such as scanout overfetch) which we need to workaround inside the driver, so if we detect we are running under a hypervisor, also assume the device access is being virtualised. Reported-by:
Stefan Fritsch <sf@sfritsch.de> Suggested-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Stefan Fritsch <sf@sfritsch.de> Cc: stable@vger.kernel.org Tested-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201019101523.4145-1-chris@chris-wilson.co.uk (cherry picked from commit f566fdcd6cc49a9d5b5d782f56e3e7cb243f01b8) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Chris Wilson authored
The GPU is trashing the low pages of its reserved memory upon reset. If we are using this memory for ringbuffers, then we will dutiful resubmit the trashed rings after the reset causing further resets, and worse. We must exclude this range from our own use. The value of 128KiB was found by empirical measurement (and verified now with a selftest) on gen9. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201019165005.18128-2-chris@chris-wilson.co.uk (cherry picked from commit d3606757e611fbd48bb239e8c2fe9779b3f50035) Signed-off-by:
-
Chris Wilson authored
In switching to using objects for our ppGTT scratch pages, care was not taken to avoid trying to unref NULL objects on failure. And for gen6 ppGTT, it appears we forgot entirely to unwind after a partial allocation failure. Fixes: 89351925 ("drm/i915/gt: Switch to object allocations for page directories") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201019083444.1286-1-chris@chris-wilson.co.uk (cherry picked from commit fa812ce96a46efc27cae4dcad866aaee9cb25d28) Signed-off-by:
-
- 19 Oct, 2020 9 commits
-
-
Chris Wilson authored
On Tigerlake, we are seeing a repeat of commit d8f50531 ("drm/i915/icl: Forcibly evict stale csb entries") where, presumably, due to a missing Global Observation Point synchronisation, the write pointer of the CSB ringbuffer is updated _prior_ to the contents of the ringbuffer. That is we see the GPU report more context-switch entries for us to parse, but those entries have not been written, leading us to process stale events, and eventually report a hung GPU. However, this effect appears to be much more severe than we previously saw on Icelake (though it might be best if we try the same approach there as well and measure), and Bruce suggested the good idea of resetting the CSB entry after use so that we can detect when it has been updated by the GPU. By instrumenting how long that may be, we can set a reliable upper bound for how long we should wait for: 513 late, avg of 61 retries (590 ns), max of 1061 retries (10099 ns) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2045 References: d8f50531 ("drm/i915/icl: Forcibly evict stale csb entries") References: HSDES#22011327657, HSDES#1508287568 Suggested-by:
Bruce Chang <yu.bruce.chang@intel.com> Signed-off-by:
-
Chris Wilson authored
A CSB entry is 64b, and it is simpler for us to treat it as an array of 64b entries than as an array of pairs of 32b entries. Signed-off-by:
-
Chris Wilson authored
During error capture, we need to take a reference to the vma from before the reset in order to catpure the contents of the vma later. Currently we are using both an active reference and a kref, but due to nature of the i915_vma reference handling, that kref is on the vma->obj and not the vma itself. This means the vma may be destroyed as soon as it is idle, that is in between the i915_active_release(&vma->active) and the i915_vma_put(vma): <3> [197.866181] BUG: KASAN: use-after-free in intel_engine_coredump_add_vma+0x36c/0x4a0 [i915] <3> [197.866339] Read of size 8 at addr ffff8881258cb800 by task gem_exec_captur/1041 <3> [197.866467] <4> [197.866512] CPU: 2 PID: 1041 Comm: gem_exec_captur Not tainted 5.9.0-g5e4234f97efba-kasan_200+ #1 <4> [197.866521] Hardware name: Intel Corp. Broxton P/Apollolake RVP1A, BIOS APLKRVPA.X64.0150.B11.1608081044 08/08/2016 <4> [197.866530] Call Trace: <4> [197.866549] dump_stack+0x99/0xd0 <4> [197.866760] ? intel_engine_coredump_add_vma+0x36c/0x4a0 [i915] <4> [197.866783] print_address_description.constprop.8+0x3e/0x60 <4> [197.866797] ? kmsg_dump_rewind_nolock+0xd4/0xd4 <4> [197.866819] ? lockdep_hardirqs_off+0xd4/0x120 <4> [197.867037] ? intel_engine_coredump_add_vma+0x36c/0x4a0 [i915] <4> [197.867249] ? intel_engine_coredump_add_vma+0x36c/0x4a0 [i915] <4> [197.867270] kasan_report.cold.10+0x1f/0x37 <4> [197.867492] ? intel_engine_coredump_add_vma+0x36c/0x4a0 [i915] <4> [197.867710] intel_engine_coredump_add_vma+0x36c/0x4a0 [i915] <4> [197.867949] i915_gpu_coredump.part.29+0x150/0x7b0 [i915] <4> [197.868186] i915_capture_error_state+0x5e/0xc0 [i915] <4> [197.868396] intel_gt_handle_error+0x6eb/0xa20 [i915] <4> [197.868624] ? intel_gt_reset_global+0x370/0x370 [i915] <4> [197.868644] ? check_flags+0x50/0x50 <4> [197.868662] ? __lock_acquire+0xd59/0x6b00 <4> [197.868678] ? register_lock_class+0x1ad0/0x1ad0 <4> [197.868944] i915_wedged_set+0xcf/0x1b0 [i915] <4> [197.869147] ? i915_wedged_get+0x90/0x90 [i915] <4> [197.869371] ? i915_wedged_get+0x90/0x90 [i915] <4> [197.869398] simple_attr_write+0x153/0x1c0 <4> [197.869428] full_proxy_write+0xee/0x180 <4> [197.869442] ? __sb_start_write+0x1f3/0x310 <4> [197.869465] vfs_write+0x1a3/0x640 <4> [197.869492] ksys_write+0xec/0x1c0 <4> [197.869507] ? __ia32_sys_read+0xa0/0xa0 <4> [197.869525] ? lockdep_hardirqs_on_prepare+0x32b/0x4e0 <4> [197.869541] ? syscall_enter_from_user_mode+0x1c/0x50 <4> [197.869566] do_syscall_64+0x33/0x80 <4> [197.869579] entry_SYSCALL_64_after_hwframe+0x44/0xa9 <4> [197.869590] RIP: 0033:0x7fd8b7aee281 <4> [197.869604] Code: c3 0f 1f 84 00 00 00 00 00 48 8b 05 59 8d 20 00 c3 0f 1f 84 00 00 00 00 00 8b 05 8a d1 20 00 85 c0 75 16 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53 <4> [197.869613] RSP: 002b:00007ffea3b72008 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 <4> [197.869625] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fd8b7aee281 <4> [197.869633] RDX: 0000000000000002 RSI: 00007fd8b81a82e7 RDI: 000000000000000d <4> [197.869641] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000034 <4> [197.869650] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fd8b81a82e7 <4> [197.869658] R13: 000000000000000d R14: 0000000000000000 R15: 0000000000000000 <3> [197.869707] <3> [197.869757] Allocated by task 1041: <4> [197.869833] kasan_save_stack+0x19/0x40 <4> [197.869843] __kasan_kmalloc.constprop.5+0xc1/0xd0 <4> [197.869853] kmem_cache_alloc+0x106/0x8e0 <4> [197.870059] i915_vma_instance+0x212/0x1930 [i915] <4> [197.870270] eb_lookup_vmas+0xe06/0x1d10 [i915] <4> [197.870475] i915_gem_do_execbuffer+0x131d/0x4080 [i915] <4> [197.870682] i915_gem_execbuffer2_ioctl+0x103/0x5d0 [i915] <4> [197.870701] drm_ioctl_kernel+0x1d2/0x270 <4> [197.870710] drm_ioctl+0x40d/0x85c <4> [197.870721] __x64_sys_ioctl+0x10d/0x170 <4> [197.870731] do_syscall_64+0x33/0x80 <4> [197.870740] entry_SYSCALL_64_after_hwframe+0x44/0xa9 <3> [197.870748] <3> [197.870798] Freed by task 22: <4> [197.870865] kasan_save_stack+0x19/0x40 <4> [197.870875] kasan_set_track+0x1c/0x30 <4> [197.870884] kasan_set_free_info+0x1b/0x30 <4> [197.870894] __kasan_slab_free+0x111/0x160 <4> [197.870903] kmem_cache_free+0xcd/0x710 <4> [197.871109] i915_vma_parked+0x618/0x800 [i915] <4> [197.871307] __gt_park+0xdb/0x1e0 [i915] <4> [197.871501] ____intel_wakeref_put_last+0xb1/0x190 [i915] <4> [197.871516] process_one_work+0x8dc/0x15d0 <4> [197.871525] worker_thread+0x82/0xb30 <4> [197.871535] kthread+0x36d/0x440 <4> [197.871545] ret_from_fork+0x22/0x30 <3> [197.871553] <3> [197.871602] The buggy address belongs to the object at ffff8881258cb740 which belongs to the cache i915_vma of size 968 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2553 Fixes: 2850748e ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by:
-
Chris Wilson authored
We may try to preempt the currently executing request, only to find that after unravelling all the dependencies that the original executing context is still the earliest in the topological sort and re-submitted back to HW (if we do detect some change in the ELSP that requires re-submission). However, due to the way we check for wrap-around during the unravelling, we mark any context that has been submitted just once (i.e. with the rq->wa_tail set, but the ring->tail earlier) as potentially wrapping and requiring a forced restore on resubmission. This was expected to be not a problem, as it was anticipated that most unwinding for preemption would result in a context switch and the few that did not would be lost in the noise. It did not take long for someone to find one particular workload where the cost of those extra context restores was measurable. However, since we know the wa_tail is of fixed size, and we know that a request must be larger than the wa_tail itself, we can safely maintain the check for request wrapping and check against a slightly future point in the ring that includes an expected wa_tail. (That is if the ring->tail is already set to rq->wa_tail, including another 8 bytes in the check does not invalidate the incremental wrap detection.) Fixes: 8ab3a381 ("drm/i915/gt: Incrementally check for rewinding") Signed-off-by:
-
Chris Wilson authored
When running gem_exec_nop, it floods the system with many requests (with the goal of userspace submitting faster than the HW can process a single empty batch). This causes the driver to continually resubmit new requests onto the end of an active context, a flood of lite-restore preemptions. If we time this just right, Tigerlake hangs. Inserting a small delay between the processing of CS events and submitting the next context, prevents the hang. Naturally it does not occur with debugging enabled. The suspicion then is that this is related to the issues with the CS event buffer, and inserting an mmio read of the CS pointer status appears to be very successful in preventing the hang. Other registers, or uncached reads, or plain mb, do not prevent the hang, suggesting that register is key -- but that the hang can be prevented by a simple udelay, suggests it is just a timing issue like that encountered by commit 233c1ae3c83f ("drm/i915/gt: Wait for CSB entries on Tigerlake"). Also note that the hang is not prevented by applying CTX_DESC_FORCE_RESTORE, or by inserting a delay on the GPU between requests. Signed-off-by: -
Chris Wilson authored
Matthew Auld noted that on more recent systems (such as the parser for gen9) we may have objects that are larger than expected by the GEM uAPI (i.e. greater than u32). These objects would have incorrect implicit batch lengths, causing the parser to reject them for being incomplete, or worse. Based on a patch by Matthew Auld. Reported-by:
-
Ville Syrjälä authored
Currently we leave the cache_level of the initial fb obj set to NONE. This means on eLLC machines the first pin_to_display() will try to switch it to WT which requires a vma unbind+bind. If that happens during the fbdev initialization rcu does not seem operational which causes the unbind to get stuck. To most appearances this looks like a dead machine on boot. Avoid the unbind by already marking the object cache_level as WT when creating it. We still do an excplicit ggtt pin which will rewrite the PTEs anyway, so they will match whatever cache level we set. Cc: <stable@vger.kernel.org> # v5.7+ Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Ayaz A Siddiqui authored
In order to avoid functional breakage of mis-programmed applications that have grown to depend on unused MOCS entries, we are programming those entries to be equal to fully cached ("L3 + LLC") entry. These reserved and unspecified entries should not be used as they may be changed to less performant variants with better coherency in the future if more entries are needed. v2: As suggested by Lucas De Marchi to utilise __init_mocs_table for programming default value, setting I915_MOCS_PTE index of tgl_mocs_table with desired value. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Francisco Jerez <currojerez@riseup.net> Cc: Mathew Alwin <alwin.mathew@intel.com> Cc: Mcguire Russell W <russell.w.mcguire@intel.com> Cc: Spruit Neil R <neil.r.spruit@intel.com> Cc: Zhou Cheng <cheng.zhou@intel.com> Cc: Benemelis Mike G <mike.g.benemelis@intel.com> Signed-off-by:Ayaz A Siddiqui <ayaz.siddiqui@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Acked-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Sean Paul authored
In commit 79946723 ("drm/i915: Assume 100% brightness when not in DPCD control mode"), we fixed the brightness level when DPCD control was not active to max brightness. This is as good as we can guess since most backlights go on full when uncontrolled. However in doing so we changed the semantics of the initial 'backlight.enabled' value. At least on Pixelbooks, they were relying on the brightness level in DP_EDP_BACKLIGHT_BRIGHTNESS_MSB to be 0 on boot such that enabled would be false. This causes the device to be enabled when the brightness is set. Without this, brightness control doesn't work. So by changing brightness to max, we also flipped enabled to be true on boot. To fix this, make enabled a function of brightness and backlight control mechanism. Fixes: 79946723 ("drm/i915: Assume 100% brightness when not in DPCD control mode") Cc: Lyude Paul <lyude@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Kevin Chowski <chowski@chromium.org>> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
- 12 Oct, 2020 2 commits
-
-
Ville Syrjälä authored
When the number of potential color planes grew to 4 we stopped setting all unused color plane offsets to ~0xfff. The code still tries to do this, but actually does nothing since the loop limits are bogus. skl_check_main_surface() actually depends on this ~0xfff behaviour as it will make sure to move the main surface offset below the aux surface offset because the hardware AUX_DIST must be a non-negative value [1], and for simplicity it doesn't bother checking if the AUX plane is actually needed or not. So currently it may end up shuffling the main surface around based on some stale leftover AUX offset. The skl+ plane code also just blindly calculates the AUX_DIST whether or not the AUX plane is actually needed by the hw or not, and that too will now potentially use some stale AUX surface offset in the calculation. Would seem nicer to guarantee a consistent non-negative AUX_DIST always. So bring back the original ~0xfff offset behaviour for unused color planes. Though it doesn't seem super likely that this inconsistency would cause any real issues. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Fixes: 2dfbf9d2 ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine") Signed-off-by:
Imre Deak <imre.deak@intel.com> (cherry picked from commit 79148ce4b25d418327feca8abb2f7392d49f5259) Signed-off-by:
-
Ville Syrjälä authored
The HDMI vs. not-HDMI check got inverted whem the bogus encoder->type checks were eliminated. So now we're using 0 as the link rate on DP and potentially non-zero on HDMI, which is exactly the opposite of what we want. The original bogus check actually worked more correctly by accident since if would always evaluate to true. Due to this we now always use the RBR/HBR1 vswing table and never ever the HBR2+ vswing table. That is probably not a good way to get a high quality signal at HBR2+ rates. Fix the check so we pick the right table. Cc: stable@vger.kernel.org Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Fixes: 94641eb6 ("drm/i915/display: Fix the encoder type check") Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> (cherry picked from commit 945b18fb4803b01e822ade6aef6cc0b6e4bd644f) Signed-off-by:
-
- 30 Sep, 2020 14 commits
-
-
Chris Wilson authored
Be consistent and use unsigned long throughout the chunk copies to avoid the inherent clumsiness of mixing integer types of different widths and signs. Failing to take acount of a wider unsigned type when using min_t can lead to treating it as a negative, only for it flip back to a large unsigned value after passing a boundary check. Fixes: ed13033f ("drm/i915/cmdparser: Only cache the dst vmap") Testcase: igt/gen9_exec_parse/bb-large Reported-by:
"Candelaria, Jared" <jared.candelaria@intel.com> Signed-off-by:
-
Chris Wilson authored
Verify that if a context is active at the time it is closed, that it is either persistent and preemptible (with hangcheck running) or it shall be removed from execution. Fixes: 9a40bddd ("drm/i915/gt: Expose heartbeat interval via sysfs") Testcase: igt/gem_ctx_persistence/heartbeat-close Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by:
-
Chris Wilson authored
Currently, we check we can send a pulse prior to disabling the heartbeat to verify that we can change the heartbeat, but since we may re-evaluate execution upon changing the heartbeat interval we need another pulse afterwards to refresh execution. v2: Tvrtko asked if we could reduce the double pulse to a single, which opened up a discussion of how we should handle the pulse-error after attempting to change the property, and the desire to serialise adjustment of the property with its validating pulse, and unwind upon failure. Fixes: 9a40bddd ("drm/i915/gt: Expose heartbeat interval via sysfs") Signed-off-by:
-
Chris Wilson authored
We only allow persistent requests to remain on the GPU past the closure of their containing context (and process) so long as they are continuously checked for hangs or allow other requests to preempt them, as we need to ensure forward progress of the system. If we allow persistent contexts to remain on the system after the the hangcheck mechanism is disabled, the system may grind to a halt. On disabling the mechanism, we sent a pulse along the engine to remove all executing contexts from the engine which would check for hung contexts -- but we did not prevent those contexts from being resubmitted if they survived the final hangcheck. Fixes: 9a40bddd ("drm/i915/gt: Expose heartbeat interval via sysfs") Testcase: igt/gem_ctx_persistence/heartbeat-stop Signed-off-by:
-
Chris Wilson authored
We have to be very careful while walking the timeline->requests list under the RCU guard, as the requests (and so rq->link) use SLAB_TYPESAFE_BY_RCU and so the requests may be reallocated within an rcu grace period. As the requests are reallocated, they are removed from one list and placed on another, and if we are iterating over that request at that moment, the list iteration jumps from one list to the next and promptly gets confused. Verify we hold the request reference to ensure that the request is not added to a new list behind our backs. <4> [582.745252] general protection fault, probably for non-canonical address 0xcccccccccccccd5c: 0000 [#1] PREEMPT SMP PTI <4> [582.745297] CPU: 0 PID: 1475 Comm: gem_ctx_persist Not tainted 5.9.0-rc1-CI-CI_DRM_8908+ #1 <4> [582.745304] Hardware name: Intel Corporation NUC7CJYH/NUC7JYB, BIOS JYGLKCPX.86A.0027.2018.0125.1347 01/25/2018 <4> [582.745317] RIP: 0010:__lock_acquire+0x2c3/0x1f40 <4> [582.745323] Code: 00 65 8b 05 c7 8a ef 7e 85 c0 0f 85 b4 07 00 00 44 8b 9d c4 08 00 00 45 85 db 0f 84 0f 01 00 00 ba 05 00 00 00 e9 c8 06 00 00 <48> 81 3f c0 89 c7 82 b8 00 00 00 00 41 0f 45 c0 83 fe 01 41 89 c3 <4> [582.745334] RSP: 0018:ffffc9000461bc40 EFLAGS: 00010002 <4> [582.745340] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 <4> [582.745345] RDX: 0000000000000000 RSI: 0000000000000000 RDI: cccccccccccccd5c <4> [582.745350] RBP: ffff8881ec4a2880 R08: 0000000000000001 R09: 0000000000000001 <4> [582.745356] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 <4> [582.745361] R13: 0000000000000000 R14: 0000000000000000 R15: cccccccccccccd5c <4> [582.745367] FS: 00007fb44da78e40(0000) GS:ffff888278000000(0000) knlGS:0000000000000000 <4> [582.745373] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [582.745378] CR2: 00007fb44daad040 CR3: 0000000268428000 CR4: 0000000000350ef0 <4> [582.745383] Call Trace: <4> [582.745390] ? __lock_acquire+0x913/0x1f40 <4> [582.745397] lock_acquire+0xb5/0x3c0 <4> [582.745526] ? kill_engines+0x19a/0x4b0 [i915] <4> [582.745533] ? find_held_lock+0x2d/0x90 <4> [582.745541] _raw_spin_lock_irq+0x30/0x40 <4> [582.745635] ? kill_engines+0x19a/0x4b0 [i915] <4> [582.745727] kill_engines+0x19a/0x4b0 [i915] <4> [582.745820] context_close+0x195/0x410 [i915] <4> [582.745912] i915_gem_context_close+0x5b/0x160 [i915] <4> [582.745994] i915_driver_postclose+0x14/0x40 [i915] <4> [582.746003] drm_file_free.part.13+0x240/0x290 <4> [582.746009] drm_release_noglobal+0x16/0x50 <4> [582.746016] __fput+0xa5/0x250 <4> [582.746021] task_work_run+0x6e/0xb0 <4> [582.746028] exit_to_user_mode_prepare+0x178/0x180 <4> [582.746034] syscall_exit_to_user_mode+0x36/0x220 <4> [582.746040] entry_SYSCALL_64_after_hwframe+0x44/0xa9 <4> [582.746045] RIP: 0033:0x7fb44d1dc421 <4> [582.746050] Code: f7 d8 64 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 8b 05 ea cf 20 00 85 c0 75 16 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3f f3 c3 0f 1f 44 00 00 53 89 fb 48 83 ec 10 <4> [582.746062] RSP: 002b:00007ffed2e83818 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 <4> [582.746069] RAX: 0000000000000000 RBX: 0000556410bfe840 RCX: 00007fb44d1dc421 <4> [582.746075] RDX: 000000000000000a RSI: 00000000c0406469 RDI: 0000000000000008 <4> [582.746080] RBP: 0000000000000008 R08: 00007fb44d1c51cc R09: 00007fb44d1c5240 <4> [582.746086] R10: 0000000000000001 R11: 0000000000000246 R12: 00000000fffffffb <4> [582.746091] R13: 0000000000000006 R14: 0000000000000000 R15: 000000000000000a <4> [582.746099] Modules linked in: vgem mei_hdcp snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio btusb btrtl btbcm btintel x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul bluetooth ghash_clmulni_intel ecdh_generic ecc i915 r8169 realtek mei_me mei snd_hda_intel i2c_hid snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm pinctrl_geminilake pinctrl_intel prime_numbers [last unloaded: test_drm_mm] Fixes: 736e785f ("drm/i915/gem: Reduce context termination list iteration guard to RCU") Signed-off-by:
-
Chris Wilson authored
The reordering and rebasing of commit 2e4c6c1a ("drm/i915: Remove i915_request.lock requirement for execution callbacks") caused it to revert an earlier correction. Let us restore commit 99f0a640d464 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs") Fixes: 2e4c6c1a ("drm/i915: Remove i915_request.lock requirement for execution callbacks") Signed-off-by:
-
Chris Wilson authored
Since the debugfs may peek into the GEM contexts as the corresponding client/fd is being closed, we may try and follow a dangling pointer. However, the context closure itself is serialised with the ctx->mutex, so if we hold that mutex as we inspect the state coupled in the context, we know the pointers within the context are stable and will remain valid as we inspect their tables. Signed-off-by:
-
Matthew Auld authored
If we are really unlucky and encounter an error during i915_vm_alloc_pt_stash, we end up passing an empty pt/pd stash all the way down into the low-level ppgtt alloc code, leading to explosions, since it expects at least the required number of pt/pd for the va range. [ 211.981418] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 211.981421] #PF: supervisor read access in kernel mode [ 211.981422] #PF: error_code(0x0000) - not-present page [ 211.981424] PGD 80000008439cb067 P4D 80000008439cb067 PUD 84a37f067 PMD 0 [ 211.981427] Oops: 0000 [#1] SMP PTI [ 211.981428] CPU: 1 PID: 1301 Comm: i915_selftest Tainted: G U I 5.9.0-rc5+ #3 [ 211.981430] Hardware name: /NUC6i7KYB, BIOS KYSKLi70.86A.0050.2017.0831.1924 08/31/2017 [ 211.981521] RIP: 0010:__gen8_ppgtt_alloc+0x1ed/0x3c0 [i915] [ 211.981523] Code: c1 48 c7 c7 5d 5d fe c0 65 ff 0d ee 1d 03 3f e8 d9 91 1f e2 8b 55 c4 31 c0 48 8b 75 b8 85 d2 0f 95 c0 48 8b 1c c6 48 89 45 98 <48> 8b 03 48 8b 90 58 02 00 00 48 85 d2 0f 84 07 ea 15 00 48 81 fa [ 211.981526] RSP: 0018:ffffba2cc0eb3970 EFLAGS: 00010202 [ 211.981527] RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000004 [ 211.981529] RDX: 0000000000000002 RSI: ffff9be998bdb8c0 RDI: ffff9be99c844300 [ 211.981530] RBP: ffffba2cc0eb39d8 R08: 0000000000000640 R09: ffff9be97cdfd000 [ 211.981531] R10: ffff9be97cdfd614 R11: 0000000000000000 R12: 0000000000000000 [ 211.981532] R13: ffff9be98607ba20 R14: ffff9be995a0b400 R15: ffffba2cc0eb39e8 [ 211.981534] FS: 00007f0f10b31000(0000) GS:ffff9be99fc40000(0000) knlGS:0000000000000000 [ 211.981536] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 211.981538] CR2: 0000000000000000 CR3: 000000084d74e006 CR4: 00000000003706e0 [ 211.981539] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 211.981541] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 211.981542] Call Trace: [ 211.981609] gen8_ppgtt_alloc+0x79/0x90 [i915] [ 211.981678] ppgtt_bind_vma+0x36/0x80 [i915] [ 211.981756] __vma_bind+0x39/0x40 [i915] [ 211.981818] fence_work+0x21/0x98 [i915] [ 211.981879] fence_notify+0x8d/0x128 [i915] [ 211.981939] __i915_sw_fence_complete+0x62/0x240 [i915] [ 211.982018] i915_vma_pin_ww+0x1ee/0x9c0 [i915] Fixes: cd0452aa ("drm/i915: Preallocate stashes for vma page-directories") Signed-off-by:
-
Maarten Lankhorst authored
In case backoff fails with an error, we return an undefined rq, assign err to rq correctly. Fixes: 8a929c9e ("drm/i915: Use ww pinning for intel_context_create_request()") Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200918111208.1392128-1-maarten.lankhorst@linux.intel.comReviewed-by:
-
Chris Wilson authored
As the error capture will compress user buffers as directed to by the user, it can take an arbitrary amount of time and space. Break up the compression loops with a call to cond_resched(), that will allow other processes to schedule (avoiding the soft lockups) and also serve as a warning should we try to make this loop atomic in the future. Testcase: igt/gem_exec_capture/many-* Signed-off-by:
-
Dan Carpenter authored
This code should use "vma[1]" instead of "vma". The "vma" variable is a valid pointer. Fixes: 6b050304 ("drm/i915: Convert i915_gem_object/client_blt.c to use ww locking as well, v2.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Chris Wilson authored
If we create a new node, it is possible for the slab allocator to return us a recently freed node. If that node was just retired, it will retain the current jiffy as its node->age. There is then a miniscule window, where as that node is retired, it will appear on the free list with an incorrect age and be eligible for reuse by one thread, and then by a second thread as the correct node->age is written. Fixes: 06b73c2d ("drm/i915/gt: Delay taking the spinlock for grabbing from the buffer pool") Signed-off-by:
-
Chris Wilson authored
Let's not try and use PAT attributes for I915_MAP_WC if the CPU doesn't support PAT. Fixes: 6056e500 ("drm/i915/gem: Support discontiguous lmem object maps") Signed-off-by:
-
Chris Wilson authored
On 32b, highmem using a finite set of indirect PTE (i.e. vmap) to provide virtual mappings of the high pages. As these are finite, map_new_virtual() must wait for some other kmap() to finish when it runs out. If we map a large number of objects, there is no method for it to tell us to release the mappings, and we deadlock. However, if we make an explicit vmap of the page, that uses a larger vmalloc arena, and also has the ability to tell us to release unwanted mappings. Most importantly, it will fail and propagate an error instead of waiting forever. Fixes: fb8621d3 ("drm/i915: Avoid allocating a vmap arena for a single page") #x86-32 References: e87666b5 ("drm/i915/shrinker: Hook up vmap allocation failure notifier") Signed-off-by:
-
- 28 Sep, 2020 1 commit
-
-
Ville Syrjälä authored
Previously intel_dump_pipe_config() used to dump the full crtc state whether or not the crtc was logically enabled or not. As that meant occasionally dumping confusing stale garbage I changed it to check whether the crtc is logically enabled or not. However I did not realize that the state checker readout code does not populate crtc_state.hw.{active,enabled}. Hence the state checker dump would only give us a full dump of the sw state but not the hw state. Fix that by populating those bits of the hw state as well. Reviewed-by:Uma Shankar <uma.shankar@intel.com> Fixes: 10d75f54 ("drm/i915: Fix plane state dumps") Signed-off-by:
-
- 27 Sep, 2020 1 commit
-
-
Julia Lawall authored
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 22 Sep, 2020 10 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.10: UAPI Changes: Cross-subsystem Changes: - virtio: Merged a PR for patches that will affect drm/virtio Core Changes: - dev: More devm_drm convertions and removal of drm_dev_init - atomic: Split out drm_atomic_helper_calc_timestamping_constants of drm_atomic_helper_update_legacy_modeset_state - ttm: More rework Driver Changes: - i915: selftests improvements - panfrost: support for Amlogic SoC - vc4: one fix - tree-wide: conversions to devm_drm_dev_alloc, - ast: simplifications of the atomic modesetting code - panfrost: multiple fixes - vc4: multiple fixes Signed-off-by: -
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.10-2020-09-18: amdgpu: - Support for PCIe DPC recovery - Sienna Cichlid updates - Navy Flounder updates - RAS fixes - Refactor DC interrupt handling - Display fixes - Fix issues with OLED panels - Mclk fixes for navi1x - Watermark fixes for renoir and raven2 - Misc code cleanups - Misc bug fixes amdkfd: - Fix a memory leak - Fix a crach in GPU reset - Add process eviction counters radeon: - expose sclk via sysfs hwmon interface - Revert bad PLL fix scheduler: - Kernel doc fixes Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Driver Changes: - Reduce INTEL_DISPLAY_ENABLED to just removed outputs treating it as disconnected (Ville) - Introducing new AUX, DVO, and TC ports and refactoring code around hot plug interrupts for those. (Ville) - Centralize PLL_ENABLE register lookup (Anusha) - Improvements around DP downstream facing ports (DFP). (Ville) - Enable YCbCr 444->420 conversion for HDMI DFPs. Ville - Remove the old global state on Display's atomic modeset (Ville) - Nuke force_min_cdclk_changed (Ville) - Extend a TGL W/A to all SKUs and to RKL (Swathi) Signed-off-by:
-
Dave Airlie authored
Merge tag 'cdns-mhdp-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next Cadence MHDP8546 DisplayPort bridge driver Signed-off-by:
-
Dave Airlie authored
Merge tag 'exynos-drm-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Two cleanups - Simply use dev_err_probe() instead of returning -EPROBE_DEFER. - Drop drm_parms allocation and deallocation code which aren't needed. Signed-off-by:
-
ssh://git.freedesktop.org/git/tegra/linuxDave Airlie authored
drm/tegra: Changes for v5.10-rc1 This is a handful of patches that add bridge support for Tegra devices and fix a couple of minor issues. Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
Miscellaneous R-Car display driver changes: - R8A7742, R8A774E1 and R8A77961 support - Fixes for pitch of YUV planar formats, non-visible plane handling and VSP device reference count - Kconfig fix to avoid displaying disabled options in .config Signed-off-by:
-
Laurent Pinchart authored
The reference to the VSP device acquired with of_find_device_by_node() in rcar_du_vsp_init() is never released. Fix it with a drmm action, which gets run both in the probe error path and in the remove path. Fixes: 6d62ef3a ("drm: rcar-du: Expose the VSP1 compositor through KMS planes") Reported-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Lad Prabhakar authored
The rcar_dw_hdmi driver is also used on Renesas RZ/G2 SoCs. Update the Kconfig entry description to reflect this. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The DU driver handles non-visible planes (fully clipped by the display's boundaries) by considering them as disabled. It thus disables the plane at the hardware level when the plane is moved off-screen. However, if the plane was previously disabled and is non-visible when it gets enabled, the attempt to disable it crashes, as the plane wasn't previously enabled. Fix it. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com>
-
