[ Upstream commit bbeefa73 ]

The error return value is not written by some firmware codecs, such as
MPEG-2 decode on CodaHx4. Clear the error return value before starting
the picture run to avoid misinterpreting unrelated values returned by
sequence initialization as error return value.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e2c114c0 ]

Even if this case shouldn't happen when controller is properly programmed,
it's still better to avoid dumping a kernel Oops for this.
As the sequence may happen only for debugging purposes, log the error and
just finish the tasklet call.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0d2e2a82 ]

Uncore PMU drivers face an awkward cyclic dependency wherein:

 - They have to pick a valid online CPU to associate with before
   registering the PMU device, since it will get exposed to userspace
   immediately.
 - The PMU registration has to be be at least partly complete before
   hotplug events can be handled, since trying to migrate an
   uninitialised context would be bad.
 - The hotplug handler has to be ready as soon as a CPU is chosen, lest
   it go offline without the user-visible cpumask value getting updated.

The arm-cci driver has tried to solve this by using get_cpu() to pick
the current CPU and prevent it from disappearing while both
registrations are performed, but that results in taking mutexes with
preemption disabled, which makes certain configurations very unhappy:

[ 1.983337] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:2004
[ 1.983340] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
[ 1.983342] Preemption disabled at:
[ 1.983353] [<ffffff80089801f4>] cci_pmu_probe+0x1dc/0x488
[ 1.983360] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.20-rt8-yocto-preempt-rt #1
[ 1.983362] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
[ 1.983364] Call trace:
[ 1.983369] dump_backtrace+0x0/0x158
[ 1.983372] show_stack+0x24/0x30
[ 1.983378] dump_stack+0x80/0xa4
[ 1.983383] ___might_sleep+0x138/0x160
[ 1.983386] __might_sleep+0x58/0x90
[ 1.983391] __rt_mutex_lock_state+0x30/0xc0
[ 1.983395] _mutex_lock+0x24/0x30
[ 1.983400] perf_pmu_register+0x2c/0x388
[ 1.983404] cci_pmu_probe+0x2bc/0x488
[ 1.983409] platform_drv_probe+0x58/0xa8

It is not feasible to resolve all the possible races outside of the perf
core itself, so address the immediate bug by following the example of
nearly every other PMU driver and not even trying to do so. Registering
the hotplug notifier first should minimise the window in which things
can go wrong, so that's about as much as we can reasonably do here. This
also revealed an additional race in assigning the global pointer too
late relative to the hotplug notifier, which gets fixed in the process.
Reported-by: Li, Meng <Meng.Li@windriver.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f4033db5 ]

This is mostly a revert of commit 55bb6a63 ("clk: rockchip: mark
noc and some special clk as critical on rk3288") except that we're
keeping "pmu_hclk_otg0" as critical still.

NOTE: turning these clocks off doesn't seem to do a whole lot in terms
of power savings (checking the power on the logic rail).  It appears
to save maybe 1-2mW.  ...but still it seems like we should turn the
clocks off if they aren't needed.

About "pmu_hclk_otg0" (the one clock from the original commit we're
still keeping critical) from an email thread:

> pmu ahb clock
>
> Function: Clock to pmu module when hibernation and/or ADP is
> enabled. Must be greater than or equal to 30 MHz.
>
> If the SOC design does not support hibernation/ADP function, only have
> hclk_otg, this clk can be switched according to the usage of otg.
> If the SOC design support hibernation/ADP, has two clocks, hclk_otg and
> pmu_hclk_otg0.
> Hclk_otg belongs to the closed part of otg logic, which can be switched
> according to the use of otg.
>
> pmu_hclk_otg0 belongs to the always on part.
>
> As for whether pmu_hclk_otg0 can be turned off when otg is not in use,
> we have not tested. IC suggest make pmu_hclk_otg0 always on.

For the rest of the clocks:

atclk: No documentation about this clock other than that it goes to
the CPU.  CPU functions fine without it on.  Maybe needed for JTAG?

jtag: Presumably this clock is only needed if you're debugging with
JTAG.  It doesn't seem like it makes sense to waste power for every
rk3288 user.  In any case to do JTAG you'd need private patches to
adjust the pinctrl the mux the JTAG out anyway.

pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two
clocks on only during kernel panics in order to access some coresight
registers.  Since nothing in the upstream kernel does this we should
be able to leave them off safely.  Maybe also needed for JTAG?

hsicphy12m_xin12m: There is no indication of why this clock would need
to be turned on for boards that don't use HSIC.

pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn
these 4 clocks on only when doing DDR transitions and they are off
otherwise.  I see no reason why they'd need to be on in the upstream
kernel which doesn't support DDRFreq.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 44b9f86c ]

The call to of_find_compatible_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:76:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function.
./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:82:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 44a4455a ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/pinctrl-pistachio.c:1422:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1360, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 09637752 ]

According to the logitech_hidpp_2.0_specification_draft_2012-06-04.pdf doc:
https://lekensteyn.nl/files/logitech/logitech_hidpp_2.0_specification_draft_2012-06-04.pdf

We should use a register-access-protocol request using the short input /
output report ids. This is necessary because 27MHz HID++ receivers have
a max-packetsize on their HIP++ endpoint of 8, so they cannot support
long reports. Using a feature-access-protocol request (which is always
long or very-long) with these will cause a timeout error, followed by
the hidpp driver treating the device as not being HID++ capable.

This commit fixes this by switching to using a rap request to get the
protocol version.

Besides being tested with a (046d:c517) 27MHz receiver with various
27MHz keyboards and mice, this has also been tested to not cause
regressions on a non-unifying dual-HID++ nano receiver (046d:c534) with
k270 and m185 HID++-2.0 devices connected and on a unifying/dj receiver
(046d:c52b) with a HID++-2.0 Logitech Rechargeable Touchpad T650.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7f09d5a6 ]

This patch enables enough time to ROME controller to bootup
after we bring the enable pin out of reset.

Fixes: 05ba533c ("Bluetooth: hci_qca: Add serdev support").
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Rocky Liao <rjliao@codeaurora.org>
Tested-by: Rocky Liao <rjliao@codeaurora.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 29da93fe ]

Randy reported objtool triggered on his (GCC-7.4) build:

  lib/strncpy_from_user.o: warning: objtool: strncpy_from_user()+0x315: call to __ubsan_handle_add_overflow() with UACCESS enabled
  lib/strnlen_user.o: warning: objtool: strnlen_user()+0x337: call to __ubsan_handle_sub_overflow() with UACCESS enabled

This is due to UBSAN generating signed-overflow-UB warnings where it
should not. Prior to GCC-8 UBSAN ignored -fwrapv (which the kernel
uses through -fno-strict-overflow).

Make the functions use 'unsigned long' throughout.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Link: http://lkml.kernel.org/r/20190424072208.754094071@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a65c88e1 ]

In-NMI warnings have been added to vmalloc_fault() via:

  ebc8827f ("x86: Barf when vmalloc and kmemcheck faults happen in NMI")

back in the time when our NMI entry code could not cope with nested NMIs.

These days, it's perfectly fine to take a fault in NMI context and we
don't have to care about the fact that IRET from the fault handler might
cause NMI nesting.

This warning has already been removed from 32-bit implementation of
vmalloc_fault() in:

  6863ea0c ("x86/mm: Remove in_nmi() warning from vmalloc_fault()")

but the 64-bit version was omitted.

Remove the bogus warning also from 64-bit implementation of vmalloc_fault().
Reported-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6863ea0c ("x86/mm: Remove in_nmi() warning from vmalloc_fault()")
Link: http://lkml.kernel.org/r/nycvar.YFH.7.76.1904240902280.9803@cbobk.fhfr.pmSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d4645d30 ]

The test robot reported a wrong assignment of a per-CPU variable which
it detected by using sparse and sent a report. The assignment itself is
correct. The annotation for sparse was wrong and hence the report.
The first pointer is a "normal" pointer and points to the per-CPU memory
area. That means that the __percpu annotation has to be moved.

Move the __percpu annotation to pointer which points to the per-CPU
area. This change affects only the sparse tool (and is ignored by the
compiler).
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: f97f8f06 ("smpboot: Provide infrastructure for percpu hotplug threads")
Link: http://lkml.kernel.org/r/20190424085253.12178-1-bigeasy@linutronix.deSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 392bef70 ]

When building x86 with Clang LTO and CFI, CFI jump regions are
automatically added to the end of the .text section late in linking. As a
result, the _etext position was being labelled before the appended jump
regions, causing confusion about where the boundaries of the executable
region actually are in the running kernel, and broke at least the fault
injection code. This moves the _etext mark to outside (and immediately
after) the .text area, as it already the case on other architectures
(e.g. arm64, arm).
Reported-and-tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190423183827.GA4012@beastSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b49bdc86 ]

When releasing the vfio-ccw mdev, we currently do not release
any existing channel program and its pinned pages. This can
lead to the following warning:

[1038876.561565] WARNING: CPU: 2 PID: 144727 at drivers/vfio/vfio_iommu_type1.c:1494 vfio_sanity_check_pfn_list+0x40/0x70 [vfio_iommu_type1]

....

1038876.561921] Call Trace:
[1038876.561935] ([<00000009897fb870>] 0x9897fb870)
[1038876.561949]  [<000003ff8013bf62>] vfio_iommu_type1_detach_group+0xda/0x2f0 [vfio_iommu_type1]
[1038876.561965]  [<000003ff8007b634>] __vfio_group_unset_container+0x64/0x190 [vfio]
[1038876.561978]  [<000003ff8007b87e>] vfio_group_put_external_user+0x26/0x38 [vfio]
[1038876.562024]  [<000003ff806fc608>] kvm_vfio_group_put_external_user+0x40/0x60 [kvm]
[1038876.562045]  [<000003ff806fcb9e>] kvm_vfio_destroy+0x5e/0xd0 [kvm]
[1038876.562065]  [<000003ff806f63fc>] kvm_put_kvm+0x2a4/0x3d0 [kvm]
[1038876.562083]  [<000003ff806f655e>] kvm_vm_release+0x36/0x48 [kvm]
[1038876.562098]  [<00000000003c2dc4>] __fput+0x144/0x228
[1038876.562113]  [<000000000016ee82>] task_work_run+0x8a/0xd8
[1038876.562125]  [<000000000014c7a8>] do_exit+0x5d8/0xd90
[1038876.562140]  [<000000000014d084>] do_group_exit+0xc4/0xc8
[1038876.562155]  [<000000000015c046>] get_signal+0x9ae/0xa68
[1038876.562169]  [<0000000000108d66>] do_signal+0x66/0x768
[1038876.562185]  [<0000000000b9e37e>] system_call+0x1ea/0x2d8
[1038876.562195] 2 locks held by qemu-system-s39/144727:
[1038876.562205]  #0: 00000000537abaf9 (&container->group_lock){++++}, at: __vfio_group_unset_container+0x3c/0x190 [vfio]
[1038876.562230]  #1: 00000000670008b5 (&iommu->lock){+.+.}, at: vfio_iommu_type1_detach_group+0x36/0x2f0 [vfio_iommu_type1]
[1038876.562250] Last Breaking-Event-Address:
[1038876.562262]  [<000003ff8013aa24>] vfio_sanity_check_pfn_list+0x3c/0x70 [vfio_iommu_type1]
[1038876.562272] irq event stamp: 4236481
[1038876.562287] hardirqs last  enabled at (4236489): [<00000000001cee7a>] console_unlock+0x6d2/0x740
[1038876.562299] hardirqs last disabled at (4236496): [<00000000001ce87e>] console_unlock+0xd6/0x740
[1038876.562311] softirqs last  enabled at (4234162): [<0000000000b9fa1e>] __do_softirq+0x556/0x598
[1038876.562325] softirqs last disabled at (4234153): [<000000000014e4cc>] irq_exit+0xac/0x108
[1038876.562337] ---[ end trace 6c96d467b1c3ca06 ]---

Similarly we do not free the channel program when we are removing
the vfio-ccw device. Let's fix this by resetting the device and freeing
the channel program and pinned pages in the release path. For the remove
path we can just quiesce the device, since in the remove path the mediated
device is going away for good and so we don't need to do a full reset.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <ae9f20dc8873f2027f7b3c5d2aaa0bdfe06850b8.1554756534.git.alifm@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cea5dde4 ]

Currently we call flush_workqueue while holding the subchannel
spinlock. But flush_workqueue function can go to sleep, so
do not call the function while holding the spinlock.

Fixes the following bug:

[  285.203430] BUG: scheduling while atomic: bash/14193/0x00000002
[  285.203434] INFO: lockdep is turned off.
....
[  285.203485] Preemption disabled at:
[  285.203488] [<000003ff80243e5c>] vfio_ccw_sch_quiesce+0xbc/0x120 [vfio_ccw]
[  285.203496] CPU: 7 PID: 14193 Comm: bash Tainted: G        W
....
[  285.203504] Call Trace:
[  285.203510] ([<0000000000113772>] show_stack+0x82/0xd0)
[  285.203514]  [<0000000000b7a102>] dump_stack+0x92/0xd0
[  285.203518]  [<000000000017b8be>] __schedule_bug+0xde/0xf8
[  285.203524]  [<0000000000b95b5a>] __schedule+0x7a/0xc38
[  285.203528]  [<0000000000b9678a>] schedule+0x72/0xb0
[  285.203533]  [<0000000000b9bfbc>] schedule_timeout+0x34/0x528
[  285.203538]  [<0000000000b97608>] wait_for_common+0x118/0x1b0
[  285.203544]  [<0000000000166d6a>] flush_workqueue+0x182/0x548
[  285.203550]  [<000003ff80243e6e>] vfio_ccw_sch_quiesce+0xce/0x120 [vfio_ccw]
[  285.203556]  [<000003ff80245278>] vfio_ccw_mdev_reset+0x38/0x70 [vfio_ccw]
[  285.203562]  [<000003ff802458b0>] vfio_ccw_mdev_remove+0x40/0x78 [vfio_ccw]
[  285.203567]  [<000003ff801a499c>] mdev_device_remove_ops+0x3c/0x80 [mdev]
[  285.203573]  [<000003ff801a4d5c>] mdev_device_remove+0xc4/0x130 [mdev]
[  285.203578]  [<000003ff801a5074>] remove_store+0x6c/0xa8 [mdev]
[  285.203582]  [<000000000046f494>] kernfs_fop_write+0x14c/0x1f8
[  285.203588]  [<00000000003c1530>] __vfs_write+0x38/0x1a8
[  285.203593]  [<00000000003c187c>] vfs_write+0xb4/0x198
[  285.203597]  [<00000000003c1af2>] ksys_write+0x5a/0xb0
[  285.203601]  [<0000000000b9e270>] system_call+0xdc/0x2d8
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <626bab8bb2958ae132452e1ddaf1b20882ad5a9d.1554756534.git.alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5d7ed2f2 ]

When two netdev have same link local addresses (such as vlan and non
vlan), two rdma cm listen id should be able to bind to following different
addresses.

listener-1: addr=lla, scope_id=A, port=X
listener-2: addr=lla, scope_id=B, port=X

However while comparing the addresses only addr and port are considered,
due to which 2nd listener fails to listen.

In below example of two listeners, 2nd listener is failing with address in
use error.

$ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1 -p 4545&

$ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1.200 -p 4545
rdma_bind_addr: Address already in use

To overcome this, consider the scope_ids as well which forms the accurate
IPv6 link local address.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 78d4eb8a ]

clang has identified a code path in which it thinks a
variable may be unused:

drivers/md/bcache/alloc.c:333:4: error: variable 'bucket' is used uninitialized whenever 'if' condition is false
      [-Werror,-Wsometimes-uninitialized]
                        fifo_pop(&ca->free_inc, bucket);
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
 #define fifo_pop(fifo, i)       fifo_pop_front(fifo, (i))
                                ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/bcache/util.h:189:6: note: expanded from macro 'fifo_pop_front'
        if (_r) {                                                       \
            ^~
drivers/md/bcache/alloc.c:343:46: note: uninitialized use occurs here
                        allocator_wait(ca, bch_allocator_push(ca, bucket));
                                                                  ^~~~~~
drivers/md/bcache/alloc.c:287:7: note: expanded from macro 'allocator_wait'
                if (cond)                                               \
                    ^~~~
drivers/md/bcache/alloc.c:333:4: note: remove the 'if' if its condition is always true
                        fifo_pop(&ca->free_inc, bucket);
                        ^
drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
 #define fifo_pop(fifo, i)       fifo_pop_front(fifo, (i))
                                ^
drivers/md/bcache/util.h:189:2: note: expanded from macro 'fifo_pop_front'
        if (_r) {                                                       \
        ^
drivers/md/bcache/alloc.c:331:15: note: initialize the variable 'bucket' to silence this warning
                        long bucket;
                                   ^

This cannot happen in practice because we only enter the loop
if there is at least one element in the list.

Slightly rearranging the code makes this clearer to both the
reader and the compiler, which avoids the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ce3e4cfb ]

Currently run_cache_set() has no return value, if there is failure in
bch_journal_replay(), the caller of run_cache_set() has no idea about
such failure and just continue to execute following code after
run_cache_set().  The internal failure is triggered inside
bch_journal_replay() and being handled in async way. This behavior is
inefficient, while failure handling inside bch_journal_replay(), cache
register code is still running to start the cache set. Registering and
unregistering code running as same time may introduce some rare race
condition, and make the code to be more hard to be understood.

This patch adds return value to run_cache_set(), and returns -EIO if
bch_journal_rreplay() fails. Then caller of run_cache_set() may detect
such failure and stop registering code flow immedidately inside
register_cache_set().

If journal replay fails, run_cache_set() can report error immediately
to register_cache_set(). This patch makes the failure handling for
bch_journal_replay() be in synchronized way, easier to understand and
debug, and avoid poetential race condition for register-and-unregister
in same time.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 63120731 ]

journal replay failed with messages:
Sep 10 19:10:43 ceph kernel: bcache: error on
bb379a64-e44e-4812-b91d-a5599871a3b1: bcache: journal entries
2057493-2057567 missing! (replaying 2057493-20766016), disabling
caching

The reason is in journal_reclaim(), when discard is enabled, we send
discard command and reclaim those journal buckets whose seq is old
than the last_seq_now, but before we write a journal with last_seq_now,
the machine is restarted, so the journal with the last_seq_now is not
written to the journal bucket, and the last_seq_wrote in the newest
journal is old than last_seq_now which we expect to be, so when we doing
replay, journals from last_seq_wrote to last_seq_now are missing.

It's hard to write a journal immediately after journal_reclaim(),
and it harmless if those missed journal are caused by discarding
since those journals are already wrote to btree node. So, if miss
seqs are started from the beginning journal, we treat it as normal,
and only print a message to show the miss journal, and point out
it maybe caused by discarding.

Patch v2 add a judgement condition to ignore the missed journal
only when discard enabled as Coly suggested.

(Coly Li: rebase the patch with other changes in bch_journal_replay())
Signed-off-by: Tang Junhui <tang.junhui.linux@gmail.com>
Tested-by: Dennis Schridde <devurandom@gmx.net>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 68d10e69 ]

When failure happens inside bch_journal_replay(), calling
cache_set_err_on() and handling the failure in async way is not a good
idea. Because after bch_journal_replay() returns, registering code will
continue to execute following steps, and unregistering code triggered
by cache_set_err_on() is running in same time. First it is unnecessary
to handle failure and unregister cache set in an async way, second there
might be potential race condition to run register and unregister code
for same cache set.

So in this patch, if failure happens in bch_journal_replay(), we don't
call cache_set_err_on(), and just print out the same error message to
kernel message buffer, then return -EIO immediately caller. Then caller
can detect such failure and handle it in synchrnozied way.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set

[ Upstream commit 95f18c9d ]

In the CACHE_SYNC branch of run_cache_set(), LIST_HEAD(journal) is used
to collect journal_replay(s) and filled by bch_journal_read().

If all goes well, bch_journal_replay() will release the list of
jounal_replay(s) at the end of the branch.

If something goes wrong, code flow will jump to the label "err:" and leave
the list unreleased.

This patch will release the list of journal_replay(s) in the case of
error detected.

v1 -> v2:
* Move the release code to the location after label 'err:' to
  simply the change.
Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f8739155 ]

When nbytes < 4, end is wronlgy set to a negative value which, due to
uint, is then interpreted to a large value leading to a deadlock in the
following code.

This patch fix this problem.

Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1007709d ]

If we timeout the admin startup sequence we might not yet have
an I/O tagset allocated which causes the teardown sequence to crash.
Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags
if the tagset wasn't allocated.

Fixes: 4c174e63 ("nvme-rdma: fix timeout handler")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 01fa0174 ]

If our target exposed a namespace with a block size that is greater
than PAGE_SIZE, set 0 capacity on the namespace as we do not support it.

This issue encountered when the nvmet namespace was backed by a tempfile.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0ed2a005 ]

In case create_singlethread_workqueue fails, the fix free the
hardware and returns NULL to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d5414c23 ]

kmalloc can fail in rsi_register_rates_channels but memcpy still attempts
to write to channels. The patch replaces these calls with kmemdup and
passes the error upstream.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b4c35c17 ]

The "rate_index" is only used as an index into the phist_data->rx_rate[]
array in the mwifiex_hist_data_set() function.  That array has
MWIFIEX_MAX_AC_RX_RATES (74) elements and it's used to generate some
debugfs information.  The "rate_index" variable comes from the network
skb->data[] and it is a u8 so it's in the 0-255 range.  We need to cap
it to prevent an array overflow.

Fixes: cbf6e055 ("mwifiex: add rx histogram statistics support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ddb35114 ]

is_slave_mode defaults to false because sai structure
that contains it is kzalloc'ed.

Anyhow, if we decide to set the following configuration
SAI slave -> SAI master, is_slave_mode will remain set on true
although SAI being master it should be set to false.

Fix this by updating is_slave_mode for each call of
fsl_sai_set_dai_fmt.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 06d5d6b7 ]

In case platform_device_alloc fails, the fix returns an error
code to avoid the NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 32e621e5 ]

Currently, building bpf samples will cause the following error.

    ./tools/lib/bpf/bpf.h:132:27: error: 'UINT32_MAX' undeclared here (not in a function) ..
     #define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */
                               ^
    ./samples/bpf/bpf_load.h:31:25: note: in expansion of macro 'BPF_LOG_BUF_SIZE'
     extern char bpf_log_buf[BPF_LOG_BUF_SIZE];
                             ^~~~~~~~~~~~~~~~

Due to commit 4519efa6 ("libbpf: fix BPF_LOG_BUF_SIZE off-by-one error")
hard-coded size of BPF_LOG_BUF_SIZE has been replaced with UINT32_MAX which is
defined in <stdint.h> header.

Even with this change, bpf selftests are running fine since these are built
with clang and it includes header(-idirafter) from clang/6.0.0/include.
(it has <stdint.h>)

    clang -I. -I./include/uapi -I../../../include/uapi -idirafter /usr/local/include -idirafter /usr/include \
    -idirafter /usr/lib/llvm-6.0/lib/clang/6.0.0/include -idirafter /usr/include/x86_64-linux-gnu \
    -Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm -c progs/test_sysctl_prog.c -o - | \
    llc -march=bpf -mcpu=generic  -filetype=obj -o /linux/tools/testing/selftests/bpf/test_sysctl_prog.o

But bpf samples are compiled with GCC, and it only searches and includes
headers declared at the target file. As '#include <stdint.h>' hasn't been
declared in tools/lib/bpf/bpf.h, it causes build failure of bpf samples.

    gcc -Wp,-MD,./samples/bpf/.sockex3_user.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes \
    -O2 -fomit-frame-pointer -std=gnu89 -I./usr/include -I./tools/lib/ -I./tools/testing/selftests/bpf/ \
    -I./tools/  lib/ -I./tools/include -I./tools/perf -c -o ./samples/bpf/sockex3_user.o ./samples/bpf/sockex3_user.c;

This commit add declaration of '#include <stdint.h>' to tools/lib/bpf/bpf.h
to fix this problem.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5dc8cdce ]

FullMAC STAs have no way to update bss channel after CSA channel switch
completion. As a result, user-space tools may provide inconsistent
channel info. For instance, consider the following two commands:
$ sudo iw dev wlan0 link
$ sudo iw dev wlan0 info
The latter command gets channel info from the hardware, so most probably
its output will be correct. However the former command gets channel info
from scan cache, so its output will contain outdated channel info.
In fact, current bss channel info will not be updated until the
next [re-]connect.

Note that mac80211 STAs have a workaround for this, but it requires
access to internal cfg80211 data, see ieee80211_chswitch_work:

	/* XXX: shouldn't really modify cfg80211-owned data! */
	ifmgd->associated->channel = sdata->csa_chandef.chan;

This patch suggests to convert mac80211 workaround into cfg80211 behavior
and to update current bss channel in cfg80211_ch_switch_notify.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2da254cc ]

This patch kill instructs the DMAC to immediately terminate
execution of a thread. and then clear the interrupt status,
at last, stop generating interrupts for DMA_SEV. to guarantee
the next dma start is clean. otherwise, one interrupt maybe leave
to next start and make some mistake.

we can reporduce the problem as follows:

DMASEV: modify the event-interrupt resource, and if the INTEN sets
function as interrupt, the DMAC will set irq<event_num> HIGH to
generate interrupt. write INTCLR to clear interrupt.

	DMA EXECUTING INSTRUCTS		DMA TERMINATE
		|				|
		|				|
	       ...			      _stop
		|				|
		|			spin_lock_irqsave
	     DMASEV				|
		|				|
		|			    mask INTEN
		|				|
		|			     DMAKILL
		|				|
		|			spin_unlock_irqrestore

in above case, a interrupt was left, and if we unmask INTEN, the DMAC
will set irq<event_num> HIGH to generate interrupt.

to fix this, do as follows:

	DMA EXECUTING INSTRUCTS		DMA TERMINATE
		|				|
		|				|
	       ...			      _stop
		|				|
		|			spin_lock_irqsave
	     DMASEV				|
		|				|
		|			     DMAKILL
		|				|
		|			   clear INTCLR
		|			    mask INTEN
		|				|
		|			spin_unlock_irqrestore
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 46b83629 ]

clang produces a harmless warning for each use for the qeth_adp_supported
macro:

drivers/s390/net/qeth_l2_main.c:559:31: warning: implicit conversion from enumeration type 'enum qeth_ipa_setadp_cmd' to
      different enumeration type 'enum qeth_ipa_funcs' [-Wenum-conversion]
        if (qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE))
            ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/s390/net/qeth_core.h:179:41: note: expanded from macro 'qeth_adp_supported'
        qeth_is_ipa_supported(&c->options.adp, f)
        ~~~~~~~~~~~~~~~~~~~~~                  ^

Add a version of this macro that uses the correct types, and
remove the unused qeth_adp_enabled() macro that has the same
problem.
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 62909da8 ]

>From the DS2408 datasheet [1]:
"Resume Command function checks the status of the RC flag and, if it is set,
 directly transfers control to the control functions, similar to a Skip ROM
 command. The only way to set the RC flag is through successfully executing
 the Match ROM, Search ROM, Conditional Search ROM, or Overdrive-Match ROM
 command"

The function currently works perfectly fine in a multidrop bus, but when we
have only a single slave connected, then only a Skip ROM is used and Match
ROM is not called at all. This is leading to problems e.g. with single one
DS2408 connected, as the Resume Command is not working properly and the
device is responding with failing results after the Resume Command.

This commit is fixing this by using a Skip ROM instead in those cases.
The bandwidth / performance advantage is exactly the same.

Refs:
[1] https://datasheets.maximintegrated.com/en/ds/DS2408.pdfSigned-off-by: Mariusz Bialonczyk <manio@skyboo.net>
Reviewed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9b019acb ]

The NOHZ idle balancer runs on the lowest idle CPU. This can
interfere with isolated CPUs, so confine it to HK_FLAG_MISC
housekeeping CPUs.

HK_FLAG_SCHED is not used for this because it is not set anywhere
at the moment. This could be folded into HK_FLAG_SCHED once that
option is fixed.

The problem was observed with increased jitter on an application
running on CPU0, caused by NOHZ idle load balancing being run on
CPU1 (an SMT sibling).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190412042613.28930-1-npiggin@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 729829d7 ]

To register data for the next kernel (command line, oldmem_base, etc.) the
current kernel needs to find the ELF segment that contains head.S. This is
currently done by checking ifor 'phdr->p_paddr == 0'. This works fine for
the current kernel build but in theory the first few pages could be
skipped. Make the detection more robust by checking if the entry point lies
within the segment.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f848bfd8 ]

Sometimes during connection recovery when there is a failure to resolve
ARP, and offload connection was not issued, driver tries to flush pending
offload connection work which was not queued up.

kernel: WARNING: CPU: 19 PID: 10110 at kernel/workqueue.c:3030 __flush_work.isra.34+0x19c/0x1b0
kernel: CPU: 19 PID: 10110 Comm: iscsid Tainted: G W 5.1.0-rc4 #11
kernel: Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.9.1 12/04/2018
kernel: RIP: 0010:__flush_work.isra.34+0x19c/0x1b0
kernel: Code: 8b fb 66 0f 1f 44 00 00 31 c0 eb ab 48 89 ef c6 07 00 0f 1f 40 00 fb 66 0f 1f 44 00 00 31 c0 eb 96 e8 08 16 fe ff 0f 0b eb 8d <0f> 0b 31 c0 eb 87 0f 1f 40 00 66 2e 0f 1
f 84 00 00 00 00 00 0f 1f
kernel: RSP: 0018:ffffa6b4054dba68 EFLAGS: 00010246
kernel: RAX: 0000000000000000 RBX: ffff91df21c36fc0 RCX: 0000000000000000
kernel: RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff91df21c36fc0
kernel: RBP: ffff91df21c36ef0 R08: 0000000000000000 R09: 0000000000000000
kernel: R10: 0000000000000038 R11: ffffa6b4054dbd60 R12: ffffffffc05e72c0
kernel: R13: ffff91db10280820 R14: 0000000000000048 R15: 0000000000000000
kernel: FS:  00007f5d83cc1740(0000) GS:ffff91df2f840000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000001cc5000 CR3: 0000000465450002 CR4: 00000000001606e0
kernel: Call Trace:
kernel: ? try_to_del_timer_sync+0x4d/0x80
kernel: qedi_ep_disconnect+0x3b/0x410 [qedi]
kernel: ? 0xffffffffc083c000
kernel: ? klist_iter_exit+0x14/0x20
kernel: ? class_find_device+0x93/0xf0
kernel: iscsi_if_ep_disconnect.isra.18+0x58/0x70 [scsi_transport_iscsi]
kernel: iscsi_if_recv_msg+0x10e2/0x1510 [scsi_transport_iscsi]
kernel: ? copyout+0x22/0x30
kernel: ? _copy_to_iter+0xa0/0x430
kernel: ? _cond_resched+0x15/0x30
kernel: ? __kmalloc_node_track_caller+0x1f9/0x270
kernel: iscsi_if_rx+0xa5/0x1e0 [scsi_transport_iscsi]
kernel: netlink_unicast+0x17f/0x230
kernel: netlink_sendmsg+0x2d2/0x3d0
kernel: sock_sendmsg+0x36/0x50
kernel: ___sys_sendmsg+0x280/0x2a0
kernel: ? timerqueue_add+0x54/0x80
kernel: ? enqueue_hrtimer+0x38/0x90
kernel: ? hrtimer_start_range_ns+0x19f/0x2c0
kernel: __sys_sendmsg+0x58/0xa0
kernel: do_syscall_64+0x5b/0x180
kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cf612c59 ]

Manage the -EPROBE_DEFER error case for the wake IRQ.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f22b1ba1 ]

The device's remove() attempts to shut down the delayed_work scheduled
on the kernel-global workqueue by calling flush_scheduled_work().

Unfortunately, flush_scheduled_work() does not prevent the delayed_work
from re-scheduling itself. The delayed_work might run after the device
has been removed, and touch the already de-allocated info structure.
This is a potential use-after-free.

Fix by calling cancel_delayed_work_sync() during remove(): this ensures
that the delayed work is properly cancelled, is no longer running, and
is not able to re-schedule itself.

This issue was detected with the help of Coccinelle.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 30f24eab ]

If for some reason the device gives us an RX interrupt before we're
ready for it, perhaps during device power-on with misconfigured IRQ
causes mapping or so, we can crash trying to access the queues.

Prevent that by checking that we actually have RXQs and that they
were properly allocated.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7ac1e464 ]

When we failed to find a root key in btrfs_update_root(), we just panic.

That's definitely not cool, fix it by outputting an unique error
message, aborting current transaction and return -EUCLEAN. This should
not normally happen as the root has been used by the callers in some
way.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>