- 30 Aug, 2017 17 commits
-
-
Jeffy Chen authored
commit 5da8e47d upstream. It looks like hidp_session_thread has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae7 Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Tested-by: AL Yu-Chen Cho <acho@suse.com> Tested-by: Rohit Vaswani <rvaswani@nvidia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Rutland authored
commit 64aee2a9 upstream. Regardless of which events form a group, it does not make sense for the events to target different tasks and/or CPUs, as this leaves the group inconsistent and impossible to schedule. The core perf code assumes that these are consistent across (successfully intialised) groups. Core perf code only verifies this when moving SW events into a HW context. Thus, we can violate this requirement for pure SW groups and pure HW groups, unless the relevant PMU driver happens to perform this verification itself. These mismatched groups subsequently wreak havoc elsewhere. For example, we handle watchpoints as SW events, and reserve watchpoint HW on a per-CPU basis at pmu::event_init() time to ensure that any event that is initialised is guaranteed to have a slot at pmu::add() time. However, the core code only checks the group leader's cpu filter (via event_filter_match()), and can thus install follower events onto CPUs violating thier (mismatched) CPU filters, potentially installing them into a CPU without sufficient reserved slots. This can be triggered with the below test case, resulting in warnings from arch backends. #define _GNU_SOURCE #include <linux/hw_breakpoint.h> #include <linux/perf_event.h> #include <sched.h> #include <stdio.h> #include <sys/prctl.h> #include <sys/syscall.h> #include <unistd.h> static int perf_event_open(struct perf_event_attr *attr, pid_t pid, int cpu, int group_fd, unsigned long flags) { return syscall(__NR_perf_event_open, attr, pid, cpu, group_fd, flags); } char watched_char; struct perf_event_attr wp_attr = { .type = PERF_TYPE_BREAKPOINT, .bp_type = HW_BREAKPOINT_RW, .bp_addr = (unsigned long)&watched_char, .bp_len = 1, .size = sizeof(wp_attr), }; int main(int argc, char *argv[]) { int leader, ret; cpu_set_t cpus; /* * Force use of CPU0 to ensure our CPU0-bound events get scheduled. */ CPU_ZERO(&cpus); CPU_SET(0, &cpus); ret = sched_setaffinity(0, sizeof(cpus), &cpus); if (ret) { printf("Unable to set cpu affinity\n"); return 1; } /* open leader event, bound to this task, CPU0 only */ leader = perf_event_open(&wp_attr, 0, 0, -1, 0); if (leader < 0) { printf("Couldn't open leader: %d\n", leader); return 1; } /* * Open a follower event that is bound to the same task, but a * different CPU. This means that the group should never be possible to * schedule. */ ret = perf_event_open(&wp_attr, 0, 1, leader, 0); if (ret < 0) { printf("Couldn't open mismatched follower: %d\n", ret); return 1; } else { printf("Opened leader/follower with mismastched CPUs\n"); } /* * Open as many independent events as we can, all bound to the same * task, CPU0 only. */ do { ret = perf_event_open(&wp_attr, 0, 0, -1, 0); } while (ret >= 0); /* * Force enable/disble all events to trigger the erronoeous * installation of the follower event. */ printf("Opened all events. Toggling..\n"); for (;;) { prctl(PR_TASK_PERF_EVENTS_DISABLE, 0, 0, 0, 0); prctl(PR_TASK_PERF_EVENTS_ENABLE, 0, 0, 0, 0); } return 0; } Fix this by validating this requirement regardless of whether we're moving events. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zhou Chengming <zhouchengming1@huawei.com> Link: http://lkml.kernel.org/r/1498142498-15758-1-git-send-email-mark.rutland@arm.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chuck Lever authored
commit fc788f64 upstream. When processing an NFSv4 WRITE operation, argp->end should never point past the end of the data in the final page of the page list. Otherwise, nfsd4_decode_compound can walk into uninitialized memory. More critical, nfsd4_decode_write is failing to increment argp->pagelen when it increments argp->pagelist. This can cause later xdr decoders to assume more data is available than really is, which can cause server crashes on malformed requests. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ronnie Sahlberg authored
commit d3edede2 upstream. Add checking for the path component length and verify it is <= the maximum that the server advertizes via FileFsAttributeInformation. With this patch cifs.ko will now return ENAMETOOLONG instead of ENOENT when users to access an overlong path. To test this, try to cd into a (non-existing) directory on a CIFS share that has a too long name: cd /mnt/aaaaaaaaaaaaaaa... and it now should show a good error message from the shell: bash: cd: /mnt/aaaaaaaaaaaaaaaa...aaaaaa: File name too long rh bz 1153996 Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sachin Prabhu authored
commit 42bec214 upstream. The df for a SMB2 share triggers a GetInfo call for FS_FULL_SIZE_INFORMATION. The values returned are used to populate struct statfs. The problem is that none of the information returned by the call contains the total blocks available on the filesystem. Instead we use the blocks available to the user ie. quota limitation when filling out statfs.f_blocks. The information returned does contain Actual free units on the filesystem and is used to populate statfs.f_bfree. For users with quota enabled, it can lead to situations where the total free space reported is more than the total blocks on the system ending up with df reports like the following # df -h /mnt/a Filesystem Size Used Avail Use% Mounted on //192.168.22.10/a 2.5G -2.3G 2.5G - /mnt/a To fix this problem, we instead populate both statfs.f_bfree with the same value as statfs.f_bavail ie. CallerAvailableAllocationUnits. This is similar to what is done already in the code for cifs and df now reports the quota information for the user used to mount the share. # df --si /mnt/a Filesystem Size Used Avail Use% Mounted on //192.168.22.10/a 2.7G 101M 2.6G 4% /mnt/a Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Pierguido Lambri <plambri@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (VMware) authored
commit 8b0db1a5 upstream. Performing the following task with kmemleak enabled: # cd /sys/kernel/tracing/events/irq/irq_handler_entry/ # echo 'enable_event:kmem:kmalloc:3 if irq >' > trigger # echo 'enable_event:kmem:kmalloc:3 if irq > 31' > trigger # echo scan > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8800b9290308 (size 32): comm "bash", pid 1114, jiffies 4294848451 (age 141.139s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81cef5aa>] kmemleak_alloc+0x4a/0xa0 [<ffffffff81357938>] kmem_cache_alloc_trace+0x158/0x290 [<ffffffff81261c09>] create_filter_start.constprop.28+0x99/0x940 [<ffffffff812639c9>] create_filter+0xa9/0x160 [<ffffffff81263bdc>] create_event_filter+0xc/0x10 [<ffffffff812655e5>] set_trigger_filter+0xe5/0x210 [<ffffffff812660c4>] event_enable_trigger_func+0x324/0x490 [<ffffffff812652e2>] event_trigger_write+0x1a2/0x260 [<ffffffff8138cf87>] __vfs_write+0xd7/0x380 [<ffffffff8138f421>] vfs_write+0x101/0x260 [<ffffffff8139187b>] SyS_write+0xab/0x130 [<ffffffff81cfd501>] entry_SYSCALL_64_fastpath+0x1f/0xbe [<ffffffffffffffff>] 0xffffffffffffffff The function create_filter() is passed a 'filterp' pointer that gets allocated, and if "set_str" is true, it is up to the caller to free it, even on error. The problem is that the pointer is not freed by create_filter() when set_str is false. This is a bug, and it is not up to the caller to free the filter on error if it doesn't care about the string. Link: http://lkml.kernel.org/r/1502705898-27571-2-git-send-email-chuhu@redhat.com Fixes: 38b78eb8 ("tracing: Factorize filter creation") Reported-by: Chunyu Hu <chuhu@redhat.com> Tested-by: Chunyu Hu <chuhu@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Wilson authored
commit fe4600a5 upstream. This is the same bug as we fixed in commit f6cd7dae ("drm: Release driver references to handle before making it available again"), but now the exposure is via the PRIME lookup tables. If we remove the object/handle from the PRIME lut, then a new request for the same object/fd will generate a new handle, thus for a short window that object is known to userspace by two different handles. Fix this by releasing the driver tracking before PRIME. Fixes: 0ff926c7 ("drm/prime: add exported buffers to current fprivs imported buffer list (v2)") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170819120558.6465-1-chris@chris-wilson.co.ukSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit bbba6f9d upstream. Lenovo G50-70 (17aa:3978) with Conexant codec chip requires the similar workaround for the inverted stereo dmic like other Lenovo models. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1020657Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 88c54cdf upstream. When user tries to replace the user-defined control TLV, the kernel checks the change of its content via memcmp(). The problem is that the kernel passes the return value from memcmp() as is. memcmp() gives a non-zero negative value depending on the comparison result, and this shall be recognized as an error code. The patch covers that corner-case, return 1 properly for the changed TLV. Fixes: 8aa9b586 ("[ALSA] Control API - more robust TLV implementation") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aaron Ma authored
commit ec667683 upstream. Synaptics add new TP firmware ID: 0x2 and 0x3, for now both lower 2 bits are indicated as TP. Change the constant to bitwise values. This makes trackpoint to be recognized on Lenovo Carbon X1 Gen5 instead of it being identified as "PS/2 Generic Mouse". Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Konstantin Khlebnikov authored
[ Upstream commit 68a66d14 ] This important to call qdisc_tree_reduce_backlog() after changing queue length. Parent qdisc should deactivate class in ->qlen_notify() called from qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero. Missed class deactivations leads to crashes/warnings at picking packets from empty qdisc and corrupting state at reactivating this class in future. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 86a7996c ("net_sched: introduce qdisc_replace() helper") Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
[ Upstream commit 4f8a881a ] As we know in some target's checkentry it may dereference par.entryinfo to check entry stuff inside. But when sched action calls xt_check_target, par.entryinfo is set with NULL. It would cause kernel panic when calling some targets. It can be reproduce with: # tc qd add dev eth1 ingress handle ffff: # tc filter add dev eth1 parent ffff: u32 match u32 0 0 action xt \ -j ECN --ecn-tcp-remove It could also crash kernel when using target CLUSTERIP or TPROXY. By now there's no proper value for par.entryinfo in ipt_init_target, but it can not be set with NULL. This patch is to void all these panics by setting it with an ipt_entry obj with all members = 0. Note that this issue has been there since the very beginning. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
[ Upstream commit b024d949 ] list.dev has not been initialized and so the copy_to_user is copying data from the stack back to user space which is a potential information leak. Fix this ensuring all of list is initialized to zero. Detected by CoverityScan, CID#1357894 ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Neal Cardwell authored
[ Upstream commit cdbeb633 ] In some situations tcp_send_loss_probe() can realize that it's unable to send a loss probe (TLP), and falls back to calling tcp_rearm_rto() to schedule an RTO timer. In such cases, sometimes tcp_rearm_rto() realizes that the RTO was eligible to fire immediately or at some point in the past (delta_us <= 0). Previously in such cases tcp_rearm_rto() was scheduling such "overdue" RTOs to happen at now + icsk_rto, which caused needless delays of hundreds of milliseconds (and non-linear behavior that made reproducible testing difficult). This commit changes the logic to schedule "overdue" RTOs ASAP, rather than at now + icsk_rto. Fixes: 6ba8a3b1 ("tcp: Tail loss probe (TLP)") Suggested-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Potapenko authored
[ Upstream commit 15339e44 ] KMSAN reported use of uninitialized sctp_addr->v4.sin_addr.s_addr and sctp_addr->v6.sin6_scope_id in sctp_v6_cmp_addr() (see below). Make sure all fields of an IPv6 address are initialized, which guarantees that the IPv4 fields are also initialized. ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 120e9dab ] syszkaller team reported another problem in DCCP [1] Problem here is that the structure holding RTO timer (ccid2_hc_tx_rto_expire() handler) is freed too soon. We can not use del_timer_sync() to cancel the timer since this timer wants to grab socket lock (that would risk a dead lock) Solution is to defer the freeing of memory when all references to the socket were released. Socket timers do own a reference, so this should fix the issue. [1] ================================================================== BUG: KASAN: use-after-free in ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144 Read of size 4 at addr ffff8801d2660540 by task kworker/u4:7/3365 CPU: 1 PID: 3365 Comm: kworker/u4:7 Not tainted 4.13.0-rc4+ #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events_unbound call_usermodehelper_exec_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x24e/0x340 mm/kasan/report.c:409 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429 ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144 call_timer_fn+0x233/0x830 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 [inline] __run_timers+0x7fd/0xb90 kernel/time/timer.c:1601 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614 __do_softirq+0x2f5/0xba3 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:638 [inline] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:1044 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:702 RIP: 0010:arch_local_irq_enable arch/x86/include/asm/paravirt.h:824 [inline] RIP: 0010:__raw_write_unlock_irq include/linux/rwlock_api_smp.h:267 [inline] RIP: 0010:_raw_write_unlock_irq+0x56/0x70 kernel/locking/spinlock.c:343 RSP: 0018:ffff8801cd50eaa8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff10 RAX: dffffc0000000000 RBX: ffffffff85a090c0 RCX: 0000000000000006 RDX: 1ffffffff0b595f3 RSI: 1ffff1003962f989 RDI: ffffffff85acaf98 RBP: ffff8801cd50eab0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801cc96ea60 R13: dffffc0000000000 R14: ffff8801cc96e4c0 R15: ffff8801cc96e4c0 </IRQ> release_task+0xe9e/0x1a40 kernel/exit.c:220 wait_task_zombie kernel/exit.c:1162 [inline] wait_consider_task+0x29b8/0x33c0 kernel/exit.c:1389 do_wait_thread kernel/exit.c:1452 [inline] do_wait+0x441/0xa90 kernel/exit.c:1523 kernel_wait4+0x1f5/0x370 kernel/exit.c:1665 SYSC_wait4+0x134/0x140 kernel/exit.c:1677 SyS_wait4+0x2c/0x40 kernel/exit.c:1673 call_usermodehelper_exec_sync kernel/kmod.c:286 [inline] call_usermodehelper_exec_work+0x1a0/0x2c0 kernel/kmod.c:323 process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2097 worker_thread+0x223/0x1860 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:425 Allocated by task 21267: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc+0x127/0x750 mm/slab.c:3561 ccid_new+0x20e/0x390 net/dccp/ccid.c:151 dccp_hdlr_ccid+0x27/0x140 net/dccp/feat.c:44 __dccp_feat_activate+0x142/0x2a0 net/dccp/feat.c:344 dccp_feat_activate_values+0x34e/0xa90 net/dccp/feat.c:1538 dccp_rcv_request_sent_state_process net/dccp/input.c:472 [inline] dccp_rcv_state_process+0xed1/0x1620 net/dccp/input.c:677 dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679 sk_backlog_rcv include/net/sock.h:911 [inline] __release_sock+0x124/0x360 net/core/sock.c:2269 release_sock+0xa4/0x2a0 net/core/sock.c:2784 inet_wait_for_connect net/ipv4/af_inet.c:557 [inline] __inet_stream_connect+0x671/0xf00 net/ipv4/af_inet.c:643 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:682 SYSC_connect+0x204/0x470 net/socket.c:1642 SyS_connect+0x24/0x30 net/socket.c:1623 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 3049: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kmem_cache_free+0x77/0x280 mm/slab.c:3763 ccid_hc_tx_delete+0xc5/0x100 net/dccp/ccid.c:190 dccp_destroy_sock+0x1d1/0x2b0 net/dccp/proto.c:225 inet_csk_destroy_sock+0x166/0x3f0 net/ipv4/inet_connection_sock.c:833 dccp_done+0xb7/0xd0 net/dccp/proto.c:145 dccp_time_wait+0x13d/0x300 net/dccp/minisocks.c:72 dccp_rcv_reset+0x1d1/0x5b0 net/dccp/input.c:160 dccp_rcv_state_process+0x8fc/0x1620 net/dccp/input.c:663 dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679 sk_backlog_rcv include/net/sock.h:911 [inline] __sk_receive_skb+0x33e/0xc00 net/core/sock.c:521 dccp_v4_rcv+0xef1/0x1c00 net/dccp/ipv4.c:871 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:248 [inline] ip_local_deliver+0x1ce/0x6d0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:477 [inline] ip_rcv_finish+0x8db/0x19c0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:248 [inline] ip_rcv+0xc3f/0x17d0 net/ipv4/ip_input.c:488 __netif_receive_skb_core+0x19af/0x33d0 net/core/dev.c:4417 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4455 process_backlog+0x203/0x740 net/core/dev.c:5130 napi_poll net/core/dev.c:5527 [inline] net_rx_action+0x792/0x1910 net/core/dev.c:5593 __do_softirq+0x2f5/0xba3 kernel/softirq.c:284 The buggy address belongs to the object at ffff8801d2660100 which belongs to the cache ccid2_hc_tx_sock of size 1240 The buggy address is located 1088 bytes inside of 1240-byte region [ffff8801d2660100, ffff8801d26605d8) The buggy address belongs to the page: page:ffffea0007499800 count:1 mapcount:0 mapping:ffff8801d2660100 index:0x0 compound_mapcount: 0 flags: 0x200000000008100(slab|head) raw: 0200000000008100 ffff8801d2660100 0000000000000000 0000000100000005 raw: ffffea00075271a0 ffffea0007538820 ffff8801d3aef9c0 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801d2660400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801d2660480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801d2660500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801d2660580: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff8801d2660600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 7749d4ff ] syzkaller reported that DCCP could have a non empty write queue at dismantle time. WARNING: CPU: 1 PID: 2953 at net/core/stream.c:199 sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2953 Comm: syz-executor0 Not tainted 4.13.0-rc4+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x417 kernel/panic.c:180 __warn+0x1c4/0x1d9 kernel/panic.c:541 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:273 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323 invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:846 RIP: 0010:sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199 RSP: 0018:ffff8801d182f108 EFLAGS: 00010297 RAX: ffff8801d1144140 RBX: ffff8801d13cb280 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff85137b00 RDI: ffff8801d13cb280 RBP: ffff8801d182f148 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d13cb4d0 R13: ffff8801d13cb3b8 R14: ffff8801d13cb300 R15: ffff8801d13cb3b8 inet_csk_destroy_sock+0x175/0x3f0 net/ipv4/inet_connection_sock.c:835 dccp_close+0x84d/0xc10 net/dccp/proto.c:1067 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 sock_release+0x8d/0x1e0 net/socket.c:597 sock_close+0x16/0x20 net/socket.c:1126 __fput+0x327/0x7e0 fs/file_table.c:210 ____fput+0x15/0x20 fs/file_table.c:246 task_work_run+0x18a/0x260 kernel/task_work.c:116 exit_task_work include/linux/task_work.h:21 [inline] do_exit+0xa32/0x1b10 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:969 get_signal+0x7e8/0x17e0 kernel/signal.c:2330 do_signal+0x94/0x1ee0 arch/x86/kernel/signal.c:808 exit_to_usermode_loop+0x21c/0x2d0 arch/x86/entry/common.c:157 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath+0x3a7/0x450 arch/x86/entry/common.c:263 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 Aug, 2017 11 commits
-
-
Greg Kroah-Hartman authored
-
Hector Martin authored
commit bed9ff16 upstream. Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oleg Nesterov authored
commit dd1c1f2f upstream. This was reported many times, and this was even mentioned in commit 52ee2dfd ("pids: refactor vnr/nr_ns helpers to make them safe") but somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is not safe because task->group_leader points to nowhere after the exiting task passes exit_notify(), rcu_read_lock() can not help. We really need to change __unhash_process() to nullify group_leader, parent, and real_parent, but this needs some cleanups. Until then we can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and fix the problem. Reported-by: Troy Kensinger <tkensinger@google.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
commit 197e7e52 upstream. The 'move_paghes()' system call was introduced long long ago with the same permission checks as for sending a signal (except using CAP_SYS_NICE instead of CAP_SYS_KILL for the overriding capability). That turns out to not be a great choice - while the system call really only moves physical page allocations around (and you need other capabilities to do a lot of it), you can check the return value to map out some the virtual address choices and defeat ASLR of a binary that still shares your uid. So change the access checks to the more common 'ptrace_may_access()' model instead. This tightens the access checks for the uid, and also effectively changes the CAP_SYS_NICE check to CAP_SYS_PTRACE, but it's unlikely that anybody really _uses_ this legacy system call any more (we hav ebetter NUMA placement models these days), so I expect nobody to notice. Famous last words. Reported-by: Otto Ebeling <otto.ebeling@iki.fi> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boris Brezillon authored
commit 277867ad upstream. of_find_compatible_node() is calling of_node_put() on its first argument thus leading to an unbalanced of_node_get/put() issue if the node has not been retained before that. Instead of passing the root node, pass NULL, which does exactly the same: iterate over all DT nodes, starting from the root node. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Fixes: 3d61467f ("irqchip: atmel-aic: Implement RTC irq fixup") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boris Brezillon authored
commit 469bcef5 upstream. aic_common_irq_fixup() is calling twice of_node_put() on the same node thus leading to an unbalanced refcount on the root node. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Fixes: b2f579b5 ("irqchip: atmel-aic: Add irq fixup infrastructure") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
zhong jiang authored
commit 73223e4e upstream. I hit a use after free issue when executing trinity and repoduced it with KASAN enabled. The related call trace is as follows. BUG: KASan: use after free in SyS_get_mempolicy+0x3c8/0x960 at addr ffff8801f582d766 Read of size 2 by task syz-executor1/798 INFO: Allocated in mpol_new.part.2+0x74/0x160 age=3 cpu=1 pid=799 __slab_alloc+0x768/0x970 kmem_cache_alloc+0x2e7/0x450 mpol_new.part.2+0x74/0x160 mpol_new+0x66/0x80 SyS_mbind+0x267/0x9f0 system_call_fastpath+0x16/0x1b INFO: Freed in __mpol_put+0x2b/0x40 age=4 cpu=1 pid=799 __slab_free+0x495/0x8e0 kmem_cache_free+0x2f3/0x4c0 __mpol_put+0x2b/0x40 SyS_mbind+0x383/0x9f0 system_call_fastpath+0x16/0x1b INFO: Slab 0xffffea0009cb8dc0 objects=23 used=8 fp=0xffff8801f582de40 flags=0x200000000004080 INFO: Object 0xffff8801f582d760 @offset=5984 fp=0xffff8801f582d600 Bytes b4 ffff8801f582d750: ae 01 ff ff 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ Object ffff8801f582d760: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff8801f582d770: 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkk. Redzone ffff8801f582d778: bb bb bb bb bb bb bb bb ........ Padding ffff8801f582d8b8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ Memory state around the buggy address: ffff8801f582d600: fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801f582d680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8801f582d700: fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb fc !shared memory policy is not protected against parallel removal by other thread which is normally protected by the mmap_sem. do_get_mempolicy, however, drops the lock midway while we can still access it later. Early premature up_read is a historical artifact from times when put_user was called in this path see https://lwn.net/Articles/124754/ but that is gone since 8bccd85f ("[PATCH] Implement sys_* do_* layering in the memory policy layer."). but when we have the the current mempolicy ref count model. The issue was introduced accordingly. Fix the issue by removing the premature release. Link: http://lkml.kernel.org/r/1502950924-27521-1-git-send-email-zhongjiang@huawei.comSigned-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit a8e800fe upstream. A Senheisser headset requires the typical sample-rate quirk for avoiding spurious errors from inquiring the current sample rate like: usb 1-1: 2:1: cannot get freq at ep 0x4 usb 1-1: 3:1: cannot get freq at ep 0x83 The USB ID 1395:740a has to be added to the entries in snd_usb_get_sample_rate_quirk(). Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1052580Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Bogendoerfer authored
commit 40981160 upstream. For 64bit kernels the lmmio_space_offset of the host bridge window isn't set correctly on systems with dino/cujo PCI host bridges. This leads to not assigned memory bars and failing drivers, which need to use these bars. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit d76036ab upstream. audit_remove_watch_rule() drops watch's reference to parent but then continues to work with it. That is not safe as parent can get freed once we drop our reference. The following is a trivial reproducer: mount -o loop image /mnt touch /mnt/file auditctl -w /mnt/file -p wax umount /mnt auditctl -D <crash in fsnotify_destroy_mark()> Grab our own reference in audit_remove_watch_rule() earlier to make sure mark does not get freed under us. Reported-by: Tony Jones <tonyj@suse.de> Signed-off-by: Jan Kara <jack@suse.cz> Tested-by: Tony Jones <tonyj@suse.de> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liping Zhang authored
commit 9c3f3794 upstream. If one cpu is doing nf_ct_extend_unregister while another cpu is doing __nf_ct_ext_add_length, then we may hit BUG_ON(t == NULL). Moreover, there's no synchronize_rcu invocation after set nf_ct_ext_types[id] to NULL, so it's possible that we may access invalid pointer. But actually, most of the ct extends are built-in, so the problem listed above will not happen. However, there are two exceptions: NF_CT_EXT_NAT and NF_CT_EXT_SYNPROXY. For _EXT_NAT, the panic will not happen, since adding the nat extend and unregistering the nat extend are located in the same file(nf_nat_core.c), this means that after the nat module is removed, we cannot add the nat extend too. For _EXT_SYNPROXY, synproxy extend may be added by init_conntrack, while synproxy extend unregister will be done by synproxy_core_exit. So after nf_synproxy_core.ko is removed, we may still try to add the synproxy extend, then kernel panic may happen. I know it's very hard to reproduce this issue, but I can play a tricky game to make it happen very easily :) Step 1. Enable SYNPROXY for tcp dport 1234 at FORWARD hook: # iptables -I FORWARD -p tcp --dport 1234 -j SYNPROXY Step 2. Queue the syn packet to the userspace at raw table OUTPUT hook. Also note, in the userspace we only add a 20s' delay, then reinject the syn packet to the kernel: # iptables -t raw -I OUTPUT -p tcp --syn -j NFQUEUE --queue-num 1 Step 3. Using "nc 2.2.2.2 1234" to connect the server. Step 4. Now remove the nf_synproxy_core.ko quickly: # iptables -F FORWARD # rmmod ipt_SYNPROXY # rmmod nf_synproxy_core Step 5. After 20s' delay, the syn packet is reinjected to the kernel. Now you will see the panic like this: kernel BUG at net/netfilter/nf_conntrack_extend.c:91! Call Trace: ? __nf_ct_ext_add_length+0x53/0x3c0 [nf_conntrack] init_conntrack+0x12b/0x600 [nf_conntrack] nf_conntrack_in+0x4cc/0x580 [nf_conntrack] ipv4_conntrack_local+0x48/0x50 [nf_conntrack_ipv4] nf_reinject+0x104/0x270 nfqnl_recv_verdict+0x3e1/0x5f9 [nfnetlink_queue] ? nfqnl_recv_verdict+0x5/0x5f9 [nfnetlink_queue] ? nla_parse+0xa0/0x100 nfnetlink_rcv_msg+0x175/0x6a9 [nfnetlink] [...] One possible solution is to make NF_CT_EXT_SYNPROXY extend built-in, i.e. introduce nf_conntrack_synproxy.c and only do ct extend register and unregister in it, similar to nf_conntrack_timeout.c. But having such a obscure restriction of nf_ct_extend_unregister is not a good idea, so we should invoke synchronize_rcu after set nf_ct_ext_types to NULL, and check the NULL pointer when do __nf_ct_ext_add_length. Then it will be easier if we add new ct extend in the future. Last, we use kfree_rcu to free nf_ct_ext, so rcu_barrier() is unnecessary anymore, remove it too. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 16 Aug, 2017 12 commits
-
-
Greg Kroah-Hartman authored
-
Thomas Gleixner authored
commit 3fa53ec2 upstream. The irq chip callbacks irq_request/release_resources() have absolutely no business with masking and unmasking the irq. The core code unmasks the interrupt after complete setup and masks it before invoking irq_release_resources(). The unmask is actually harmful as it happens before the interrupt is completely initialized in __setup_irq(). Remove it. Fixes: f6a8249f ("pinctrl: exynos: Lock GPIOs as interrupts when used as EINTs") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Kukjin Kim <kgene@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-gpio@vger.kernel.org Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Icenowy Zheng authored
commit d81ece74 upstream. The PH16 pin has a function with mux id 0x5, which is the DET pin of the "sim" (smart card reader) IP block. This function is missing in old versions of A10/A20 SoCs' datasheets and user manuals, so it's also missing in the old drivers. The newest A10 Datasheet V1.70 and A20 Datasheet V1.41 contain this pin function, and it's discovered during implementing R40 pinctrl driver. Add it to the driver. As we now merged A20 pinctrl driver to the A10 one, we need to only fix the A10 driver now. Fixes: f2821b1c ("pinctrl: sunxi: Move Allwinner A10 pinctrl driver to a driver of its own") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoph Hellwig authored
commit 8a9d6e96 upstream. The blocklayout code does not compile cleanly for a 32-bit sector_t, and also has no reliable checks for devices sizes, which makes it unsafe to use with a kernel that doesn't support large block devices. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Arnd Bergmann <arnd@arndb.de> Fixes: 5c83746a ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing") Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan-Gabriel Mirea authored
commit d466d3c1 upstream. In order to select the alternate voltage reference pair (VALTH/VALTL), the right value for the REFSEL field in the ADCx_CFG register is "01", leading to 0x800 as register mask. See section 8.2.6.4 in the reference manual[1]. [1] http://www.nxp.com/docs/en/reference-manual/VFXXXRM.pdf Fixes: a7754276 ("iio:adc:imx: add Freescale Vybrid vf610 adc driver") Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sandeep Singh authored
commit e788787e upstream. Certain HP keyboards would keep inputting a character automatically which is the wake-up key after S3 resume On some AMD platforms USB host fails to respond (by holding resume-K) to USB device (an HP keyboard) resume request within 1ms (TURSM) and ensures that resume is signaled for at least 20 ms (TDRSMDN), which is defined in USB 2.0 spec. The result is that the keyboard is out of function. In SNPS USB design, the host responds to the resume request only after system gets back to S0 and the host gets to functional after the internal HW restore operation that is more than 1 second after the initial resume request from the USB device. As a workaround for specific keyboard ID(HP Keyboards), applying port reset after resume when the keyboard is plugged in. Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kai-Heng Feng authored
commit 7496cfe5 upstream. Moshi USB to Ethernet Adapter internally uses a Genesys Logic hub to connect to Realtek r8153. The Realtek r8153 ethernet does not work on the internal hub, no-lpm quirk can make it work. Since another r8153 dongle at my hand does not have the issue, so add the quirk to the Genesys Logic hub instead. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 94c43b98 upstream. Some buggy USB disk adapters disconnect and reconnect multiple times during the enumeration procedure. This may lead to a device connecting at full speed instead of high speed, because when the USB stack sees that a device isn't able to enumerate at high speed, it tries to hand the connection over to a full-speed companion controller. The logic for doing this is careful to check that the device is still connected. But this check is inadequate if the device disconnects and reconnects before the check is done. The symptom is that a device works, but much more slowly than it is capable of operating. The situation was made worse recently by commit 22547c4c ("usb: hub: Wait for connection to be reestablished after port reset"), which increases the delay following a reset before a disconnect is recognized, thus giving the device more time to reconnect. This patch makes the check more robust. If the device was disconnected at any time during enumeration, we will now skip the full-speed handover. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Zdenek Kabelac <zkabelac@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Swanson authored
commit 89f23d51 upstream. Similar to commit d595259f ("usb-storage: Add ignore-residue quirk for Initio INIC-3619") for INIC-3169 in unusual_devs.h but INIC-3069 already present in unusual_uas.h. Both in same controller IC family. Issue is that MakeMKV fails during key exchange with installed bluray drive with following error: 002004:0000 Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED' occurred while issuing SCSI command AD010..080002400 to device 'SG:dev_11:0' Signed-off-by: Alan Swanson <reiver@improbability.net> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Akinobu Mita authored
commit a3507e48 upstream. The TSL2563 driver provides three iio channels, two of which are raw ADC channels (channel 0 and channel 1) in the device and the remaining one is calculated by the two. The ADC channel 0 only supports programmable interrupt with threshold settings and this driver supports the event but the generated event code does not contain the corresponding iio channel type. This is going to change userspace ABI. Hopefully fixing this to be what it should always have been won't break any userspace code. Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 105967ad upstream. gcc-7 points out an older regression: drivers/staging/iio/resolver/ad2s1210.c: In function 'ad2s1210_read_raw': drivers/staging/iio/resolver/ad2s1210.c:515:42: error: '<<' in boolean context, did you mean '<' ? [-Werror=int-in-bool-context] The original code had 'unsigned short' here, but incorrectly got converted to 'bool'. This reverts the regression and uses a normal type instead. Fixes: 29148543 ("staging:iio:resolver:ad2s1210 minimal chan spec conversion.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rafael J. Wysocki authored
commit cd5a6a4f upstream. Make usb_hc_died() clear the HCD_FLAG_RH_RUNNING flag for the shared HCD and set HCD_FLAG_DEAD for it, in analogy with what is done for the primary one. Among other thigs, this prevents check_root_hub_suspended() from returning -EBUSY for dead HCDs which helps to work around system suspend issues in some situations. This actually fixes occasional suspend failures on one of my test machines. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-