- 26 Jun, 2018 5 commits
-
-
Davide Caratti authored
[ Upstream commit 8d499533 ] use nla_strlcpy() to avoid copying data beyond the length of TCA_DEF_DATA netlink attribute, in case it is less than SIMP_MAX_DATA and it does not end with '\0' character. v2: fix errors in the commit message, thanks Hangbin Liu Fixes: fa1b1cff ("net_cls_act: Make act_simple use of netlink policy.") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhouyang Jia authored
[ Upstream commit 349b71d6 ] When pskb_trim_rcsum fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling pskb_trim_rcsum. Signed-off-by:
Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit 09757646 ] IPVS setups with local client and remote tunnel server need to create exception for the local virtual IP. What we do is to change PMTU from 64KB (on "lo") to 1460 in the common case. Suggested-by:
Martin KaFai Lau <kafai@fb.com> Fixes: 45e4fd26 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Fixes: 7343ff31 ("ipv6: Don't create clones of host routes.") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
David Ahern <dsahern@gmail.com> Acked-by:
-
Bjørn Mork authored
[ Upstream commit 49c2c3f2 ] Commit 4a0e3e98 ("cdc_ncm: Add support for moving NDP to end of NCM frame") added logic to reserve space for the NDP at the end of the NTB/skb. This reservation did not take the final alignment of the NDP into account, causing us to reserve too little space. Additionally the padding prior to NDP addition did not ensure there was enough space for the NDP. The NTB/skb with the NDP appended would then exceed the configured max size. This caused the final padding of the NTB to use a negative count, padding to almost INT_MAX, and resulting in: [60103.825970] BUG: unable to handle kernel paging request at ffff9641f2004000 [60103.825998] IP: __memset+0x24/0x30 [60103.826001] PGD a6a06067 P4D a6a06067 PUD 4f65a063 PMD 72003063 PTE 0 [60103.826013] Oops: 0002 [#1] SMP NOPTI [60103.826018] Modules linked in: (removed( [60103.826158] CPU: 0 PID: 5990 Comm: Chrome_DevTools Tainted: G O 4.14.0-3-amd64 #1 Debian 4.14.17-1 [60103.826162] Hardware name: LENOVO 20081 BIOS 41CN28WW(V2.04) 05/03/2012 [60103.826166] task: ffff964193484fc0 task.stack: ffffb2890137c000 [60103.826171] RIP: 0010:__memset+0x24/0x30 [60103.826174] RSP: 0000:ffff964316c03b68 EFLAGS: 00010216 [60103.826178] RAX: 0000000000000000 RBX: 00000000fffffffd RCX: 000000001ffa5000 [60103.826181] RDX: 0000000000000005 RSI: 0000000000000000 RDI: ffff9641f2003ffc [60103.826184] RBP: ffff964192f6c800 R08: 00000000304d434e R09: ffff9641f1d2c004 [60103.826187] R10: 0000000000000002 R11: 00000000000005ae R12: ffff9642e6957a80 [60103.826190] R13: ffff964282ff2ee8 R14: 000000000000000d R15: ffff9642e4843900 [60103.826194] FS: 00007f395aaf6700(0000) GS:ffff964316c00000(0000) knlGS:0000000000000000 [60103.826197] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [60103.826200] CR2: ffff9641f2004000 CR3: 0000000013b0c000 CR4: 00000000000006f0 [60103.826204] Call Trace: [60103.826212] <IRQ> [60103.826225] cdc_ncm_fill_tx_frame+0x5e3/0x740 [cdc_ncm] [60103.826236] cdc_ncm_tx_fixup+0x57/0x70 [cdc_ncm] [60103.826246] usbnet_start_xmit+0x5d/0x710 [usbnet] [60103.826254] ? netif_skb_features+0x119/0x250 [60103.826259] dev_hard_start_xmit+0xa1/0x200 [60103.826267] sch_direct_xmit+0xf2/0x1b0 [60103.826273] __dev_queue_xmit+0x5e3/0x7c0 [60103.826280] ? ip_finish_output2+0x263/0x3c0 [60103.826284] ip_finish_output2+0x263/0x3c0 [60103.826289] ? ip_output+0x6c/0xe0 [60103.826293] ip_output+0x6c/0xe0 [60103.826298] ? ip_forward_options+0x1a0/0x1a0 [60103.826303] tcp_transmit_skb+0x516/0x9b0 [60103.826309] tcp_write_xmit+0x1aa/0xee0 [60103.826313] ? sch_direct_xmit+0x71/0x1b0 [60103.826318] tcp_tasklet_func+0x177/0x180 [60103.826325] tasklet_action+0x5f/0x110 [60103.826332] __do_softirq+0xde/0x2b3 [60103.826337] irq_exit+0xae/0xb0 [60103.826342] do_IRQ+0x81/0xd0 [60103.826347] common_interrupt+0x98/0x98 [60103.826351] </IRQ> [60103.826355] RIP: 0033:0x7f397bdf2282 [60103.826358] RSP: 002b:00007f395aaf57d8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff6e [60103.826362] RAX: 0000000000000000 RBX: 00002f07bc6d0900 RCX: 00007f39752d7fe7 [60103.826365] RDX: 0000000000000022 RSI: 0000000000000147 RDI: 00002f07baea02c0 [60103.826368] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [60103.826371] R10: 00000000ffffffff R11: 0000000000000000 R12: 00002f07baea02c0 [60103.826373] R13: 00002f07bba227a0 R14: 00002f07bc6d090c R15: 0000000000000000 [60103.826377] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 <f3> 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 [60103.826442] RIP: __memset+0x24/0x30 RSP: ffff964316c03b68 [60103.826444] CR2: ffff9641f2004000 Commit e1069bbf ("net: cdc_ncm: Reduce memory use when kernel memory low") made this bug much more likely to trigger by reducing the NTB size under memory pressure. Link: https://bugs.debian.org/893393Reported-by:
Горбешко Богдан <bodqhrohro@gmail.com> Reported-and-tested-by:
Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: Enrico Mioso <mrkiko.rs@gmail.com> Fixes: 4a0e3e98 ("cdc_ncm: Add support for moving NDP to end of NCM frame") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Xiangning Yu authored
[ Upstream commit eb55bbf8 ] There is a timing issue under active-standy mode, when bond_enslave() is called, bond->params.primary might not be initialized yet. Any time the primary slave string changes, bond->force_primary should be set to true to make sure the primary becomes the active slave. Signed-off-by:
Xiangning Yu <yuxiangning@gmail.com> Signed-off-by:
-
- 20 Jun, 2018 35 commits
-
-
Greg Kroah-Hartman authored
-
Eric Dumazet authored
commit 02db5571 upstream. While rcvbuf is properly clamped by tcp_rmem[2], rcvwin is left to a potentially too big value. It has no serious effect, since : 1) tcp_grow_window() has very strict checks. 2) window_clamp can be mangled by user space to any value anyway. tcp_init_buffer_space() and companions use tcp_full_space(), we use tcp_win_from_space() to avoid reloading sk->sk_rcvbuf Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Wei Wang <weiwan@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Liu Bo authored
[ Upstream commit 8810f751 ] There is a scenario that can end up with rebuild process failing to return good content, i.e. suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content, and users will think of this as data loss. More seriouly, if the loss happens on some important internal btree roots, it could refuse to mount. This extends btrfs to do more retries and each retry fails only one stripe. Since raid6 can tolerate 2 disk failures, if there is one more failure besides the failure on which we're recovering, this can always work. The worst case is to retry as many times as the number of raid6 disks, but given the fact that such a scenario is really rare in practice, it's still acceptable. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Liu Bo authored
[ Upstream commit 762221f0 ] The raid6 corruption is that, suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content. We've fixed normal reads to rebuild raid6 correctly with more retries in Patch "Btrfs: make raid6 rebuild retry more"[1], this is to fix scrub to do the exactly same rebuild process. [1]: https://patchwork.kernel.org/patch/10091755/Signed-off-by:
-
Sasha Levin authored
This reverts commit d91bb7c6. This commit used an incorrect log message. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Russell King authored
[ Upstream commit 2d7b3c64 ] When a panic() occurs, the kexec code uses smp_send_stop() to stop the other CPUs, but this results in the CPU register state not being saved, and gdb is unable to inspect the state of other CPUs. Commit 0ee59413 ("x86/panic: replace smp_send_stop() with kdump friendly version in panic path") addressed the issue on x86, but ignored other architectures. Address the issue on ARM by splitting out the crash stop implementation to crash_smp_send_stop() and adding the necessary protection. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Łukasz Stelmach authored
[ Upstream commit f2ae9de0 ] The hypervisor setup before __enter_kernel destroys the value sotred in r1. The value needs to be restored just before the jump. Fixes: 6b52f7bd ("ARM: hyp-stub: Use r1 for the soft-restart address") Signed-off-by:
Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by:
-
Łukasz Stelmach authored
[ Upstream commit e07e3c33 ] In commit 639da5ee ("ARM: add an extra temp register to the low level debugging addruart macro") an additional temporary register was added to the addruart macro, but the decompressor code wasn't updated. Fixes: 639da5ee ("ARM: add an extra temp register to the low level debugging addruart macro") Signed-off-by:
-
Mark Rutland authored
[ Upstream commit 4f74d72a ] When CONFIG_RANDOMIZE_TEXT_OFFSET=y, TEXT_OFFSET is an arbitrary multiple of PAGE_SIZE in the interval [0, 2MB). The EFI stub does not account for the potential misalignment of TEXT_OFFSET relative to EFI_KIMG_ALIGN, and produces a randomized physical offset which is always a round multiple of EFI_KIMG_ALIGN. This may result in statically allocated objects whose alignment exceeds PAGE_SIZE to appear misaligned in memory. This has been observed to result in spurious stack overflow reports and failure to make use of the IRQ stacks, and theoretically could result in a number of other issues. We can OR in the low bits of TEXT_OFFSET to ensure that we have the necessary offset (and hence preserve the misalignment of TEXT_OFFSET relative to EFI_KIMG_ALIGN), so let's do that. Reported-by:
Kim Phillips <kim.phillips@arm.com> Tested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 6f26b367 ("arm64: kaslr: increase randomization granularity") Link: http://lkml.kernel.org/r/20180518140841.9731-2-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Helge Deller authored
[ Upstream commit 01f56832 ] No other architecture has setup_profiling_timer() in the init section, thus on parisc we face this section mismatch warning: Reference from the function devm_device_add_group() to the function .init.text:setup_profiling_timer() Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Mathieu Malaterre authored
[ Upstream commit 3febfc8a ] Since the grub_reclaim() function can be made static, make it so. Silences the following GCC warning (W=1): kernel/sched/deadline.c:1120:5: warning: no previous prototype for ‘grub_reclaim’ [-Wmissing-prototypes] Signed-off-by:
Mathieu Malaterre <malat@debian.org> Acked-by:
Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180516200902.959-1-malat@debian.orgSigned-off-by:
-
Mathieu Malaterre authored
[ Upstream commit f6a34630 ] In the following commit: 6b55c965 ("sched/debug: Move print_cfs_rq() declaration to kernel/sched/sched.h") the print_cfs_rq() prototype was added to <kernel/sched/sched.h>, right next to the prototypes for print_cfs_stats(), print_rt_stats() and print_dl_stats(). Finish this previous commit and also move related prototypes for print_rt_rq() and print_dl_rq(). Remove existing extern declarations now that they not needed anymore. Silences the following GCC warning, triggered by W=1: kernel/sched/debug.c:573:6: warning: no previous prototype for ‘print_rt_rq’ [-Wmissing-prototypes] kernel/sched/debug.c:603:6: warning: no previous prototype for ‘print_dl_rq’ [-Wmissing-prototypes] Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 2b620729 ] There is a comment here which says that DIV_ROUND_UP() and that's where the problem comes from. Say you pick: args->bpp = UINT_MAX - 7; args->width = 4; args->height = 1; The integer overflow in DIV_ROUND_UP() means "cpp" is UINT_MAX / 8 and because of how we picked args->width that means cpp < UINT_MAX / 4. I've fixed it by preventing the integer overflow in DIV_ROUND_UP(). I removed the check for !cpp because it's not possible after this change. I also changed all the 0xffffffffU references to U32_MAX. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180516140026.GA19340@mwandaSigned-off-by:
-
Waiman Long authored
[ Upstream commit 5a817641 ] The filesystem freezing code needs to transfer ownership of a rwsem embedded in a percpu-rwsem from the task that does the freezing to another one that does the thawing by calling percpu_rwsem_release() after freezing and percpu_rwsem_acquire() before thawing. However, the new rwsem debug code runs afoul with this scheme by warning that the task that releases the rwsem isn't the one that acquires it, as reported by Amir Goldstein: DEBUG_LOCKS_WARN_ON(sem->owner != get_current()) WARNING: CPU: 1 PID: 1401 at /home/amir/build/src/linux/kernel/locking/rwsem.c:133 up_write+0x59/0x79 Call Trace: percpu_up_write+0x1f/0x28 thaw_super_locked+0xdf/0x120 do_vfs_ioctl+0x270/0x5f1 ksys_ioctl+0x52/0x71 __x64_sys_ioctl+0x16/0x19 do_syscall_64+0x5d/0x167 entry_SYSCALL_64_after_hwframe+0x49/0xbe To work properly with the rwsem debug code, we need to annotate that the rwsem ownership is unknown during the tranfer period until a brave soul comes forward to acquire the ownership. During that period, optimistic spinning will be disabled. Reported-by:
Amir Goldstein <amir73il@gmail.com> Tested-by:
Waiman Long <longman@redhat.com> Acked-by:
-
Waiman Long authored
[ Upstream commit d7d760ef ] There are use cases where a rwsem can be acquired by one task, but released by another task. In thess cases, optimistic spinning may need to be disabled. One example will be the filesystem freeze/thaw code where the task that freezes the filesystem will acquire a write lock on a rwsem and then un-owns it before returning to userspace. Later on, another task will come along, acquire the ownership, thaw the filesystem and release the rwsem. Bit 0 of the owner field was used to designate that it is a reader owned rwsem. It is now repurposed to mean that the owner of the rwsem is not known. If only bit 0 is set, the rwsem is reader owned. If bit 0 and other bits are set, it is writer owned with an unknown owner. One such value for the latter case is (-1L). So we can set owner to 1 for reader-owned, -1 for writer-owned. The owner is unknown in both cases. To handle transfer of rwsem ownership, the higher level code should set the owner field to -1 to indicate a write-locked rwsem with unknown owner. Optimistic spinning will be disabled in this case. Once the higher level code figures who the new owner is, it can then set the owner field accordingly. Tested-by:
-
Stefan Agner authored
[ Upstream commit 2e5be528 ] On i.MX6 ULL using PLL3 seems to cause a freeze when setting the parent to IMX6UL_CLK_PLL3_USB_OTG. This only seems to appear since commit 6f9575e5 ("clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux"), probably because the clock is now forced to be on. Fixes: 6f9575e5("clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux") Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Sekhar Nori authored
[ Upstream commit bb7298a7 ] VPIF capture driver expects card name to be set since it uses it without checking for NULL. The commit which introduced VPIF display and capture support added card name only for display, not for capture. Set it in platform data to probe driver successfully. While at it, also fix the display card name to something more appropriate. Fixes: 85609c1c ("DaVinci: DM646x - platform changes for vpif capture and display drivers") Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Sekhar Nori authored
[ Upstream commit 7d46899d ] commit a16cb91a ("[media] media: vpif: use a configurable i2c_adapter_id for vpif display") removed hardcoded I2C adaptor setting in VPIF driver, but missed updating platform data passed from DM646x board. Fix it. Fixes: a16cb91a ("[media] media: vpif: use a configurable i2c_adapter_id for vpif display") Signed-off-by:
-
Sekhar Nori authored
[ Upstream commit 73d4337e ] commit b3843414 ("ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x") inadvertently removed priority setting for timer0_12 (bottom half of timer0). This timer is used as clockevent. When INTPRIn register setting for an interrupt is left at 0, it is mapped to FIQ by the AINTC causing the timer interrupt to not get generated. Fix it by including an entry for timer0_12 in interrupt priority map array. While at it, move the clockevent comment to the right place. Fixes: b3843414 ("ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x") Signed-off-by:
-
Peter Rosin authored
[ Upstream commit 35cd67a0 ] Returning zero is wrong in this case. Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Fixes: 174a13aa ("i2c: Add viperboard i2c master driver") Signed-off-by:
-
Peter Rosin authored
[ Upstream commit 12d9bbc5 ] Returning -1 (-EPERM) is not appropriate here, go with -EIO. Signed-off-by:
-
Peter Rosin authored
[ Upstream commit de9a8634 ] Returning zero is wrong in this case. Signed-off-by:
-
Russell King authored
[ Upstream commit 9954b80b ] platform_domain_notifier contains a variable sized array, which the pm_clk_notify() notifier treats as a NULL terminated array: for (con_id = clknb->con_ids; *con_id; con_id++) pm_clk_add(dev, *con_id); Omitting the initialiser for con_ids means that the array is zero sized, and there is no NULL terminator. This leads to pm_clk_notify() overrunning into what ever structure follows, which may not be NULL. This leads to an oops: Unable to handle kernel NULL pointer dereference at virtual address 0000008c pgd = c0003000 [0000008c] *pgd=80000800004003c, *pmd=00000000c Internal error: Oops: 206 [#1] PREEMPT SMP ARM Modules linked in:c CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0+ #9 Hardware name: Keystone PC is at strlen+0x0/0x34 LR is at kstrdup+0x18/0x54 pc : [<c0623340>] lr : [<c0111d6c>] psr: 20000013 sp : eec73dc0 ip : eed780c0 fp : 00000001 r10: 00000000 r9 : 00000000 r8 : eed71e10 r7 : 0000008c r6 : 0000008c r5 : 014000c0 r4 : c03a6ff4 r3 : c09445d0 r2 : 00000000 r1 : 014000c0 r0 : 0000008c Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5387d Table: 00003000 DAC: fffffffd Process swapper/0 (pid: 1, stack limit = 0xeec72210) Stack: (0xeec73dc0 to 0xeec74000) ... [<c0623340>] (strlen) from [<c0111d6c>] (kstrdup+0x18/0x54) [<c0111d6c>] (kstrdup) from [<c03a6ff4>] (__pm_clk_add+0x58/0x120) [<c03a6ff4>] (__pm_clk_add) from [<c03a731c>] (pm_clk_notify+0x64/0xa8) [<c03a731c>] (pm_clk_notify) from [<c004614c>] (notifier_call_chain+0x44/0x84) [<c004614c>] (notifier_call_chain) from [<c0046320>] (__blocking_notifier_call_chain+0x48/0x60) [<c0046320>] (__blocking_notifier_call_chain) from [<c0046350>] (blocking_notifier_call_chain+0x18/0x20) [<c0046350>] (blocking_notifier_call_chain) from [<c0390234>] (device_add+0x36c/0x534) [<c0390234>] (device_add) from [<c047fc00>] (of_platform_device_create_pdata+0x70/0xa4) [<c047fc00>] (of_platform_device_create_pdata) from [<c047fea0>] (of_platform_bus_create+0xf0/0x1ec) [<c047fea0>] (of_platform_bus_create) from [<c047fff8>] (of_platform_populate+0x5c/0xac) [<c047fff8>] (of_platform_populate) from [<c08b1f04>] (of_platform_default_populate_init+0x8c/0xa8) [<c08b1f04>] (of_platform_default_populate_init) from [<c000a78c>] (do_one_initcall+0x3c/0x164) [<c000a78c>] (do_one_initcall) from [<c087bd9c>] (kernel_init_freeable+0x10c/0x1d0) [<c087bd9c>] (kernel_init_freeable) from [<c0628db0>] (kernel_init+0x8/0xf0) [<c0628db0>] (kernel_init) from [<c00090d8>] (ret_from_fork+0x14/0x3c) Exception stack(0xeec73fb0 to 0xeec73ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3520000 1afffff7 e12fff1e c0801730 (e5d02000) ---[ end trace cafa8f148e262e80 ]--- Fix this by adding the necessary initialiser. Fixes: fc20ffe1 ("ARM: keystone: add PM domain support for clock management") Signed-off-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Daniel Glöckner authored
[ Upstream commit ebc3dd68 ] It has been observed that writing 0xF2 to the power register while it reads as 0xF4 results in the register having the value 0xF0, i.e. clearing RESUME and setting SUSPENDM in one go does not work. It might also violate the USB spec to transition directly from resume to suspend, especially when not taking T_DRSMDN into account. But this is what happens when a remote wakeup occurs between SetPortFeature USB_PORT_FEAT_SUSPEND on the root hub and musb_bus_suspend being called. This commit returns -EBUSY when musb_bus_suspend is called while remote wakeup is signalled and thus avoids to reset the RESUME bit. Ignoring this error when musb_port_suspend is called from musb_hub_control is ok. Signed-off-by:
Daniel Glöckner <dg@emlix.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 4776cab4 ] Some AFS servers refuse to accept unencrypted traffic, so can't be accessed with kAFS. Set the AF_RXRPC security level to encrypt client calls to deal with this. Note that incoming service calls are set by the remote client and so aren't affected by this. This requires an AF_RXRPC patch to pass the value set by setsockopt to calls begun by the kernel. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit ea739a28 ] Commit 9e343e87 ("mtd: cfi: convert inline functions to macros") changed map_word_andequal() into a macro, but also changed the right hand side of the comparison from val3 to val2. Change it back to use val3 on the right hand side. Thankfully this did not cause a regression because all callers currently pass the same argument for val2 and val3. Fixes: 9e343e87 ("mtd: cfi: convert inline functions to macros") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Dave Hansen authored
[ Upstream commit 3488a600 ] Protection key 0 is the default key for all memory and will not normally come back from pkey_alloc(). But, you might still want pass it to mprotect_pkey(). This check ensures that you can use pkey 0. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellermen <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180509171356.9E40B254@viggo.jf.intel.comSigned-off-by:
-
Dave Hansen authored
[ Upstream commit acb25d76 ] This makes it possible to to tell what 'prot' a given allocation is supposed to have. That way, if we want to change just the pkey, we know what 'prot' to pass to mprotect_pkey(). Also, keep a record of the most recent allocation so the tests can easily find it. Signed-off-by:
-
Dave Hansen authored
[ Upstream commit 3d64f4ed ] We dump out the entire area of the siginfo where the si_pkey_ptr is supposed to be. But, we do some math on the poitner, which is a u32. We intended to do byte math, not u32 math on the pointer. Cast it over to a u8* so it works. Also, move this block of code to below th si_code check. It doesn't hurt anything, but the si_pkey field is gibberish for other signal types. Signed-off-by:
-
Dave Hansen authored
[ Upstream commit f50b4878 ] In our "exhaust all pkeys" test, we make sure that there is the expected number available. Turns out that the test did not cover the execute-only key, but discussed it anyway. It did *not* discuss the test-allocated key. Now that we have a test for the mprotect(PROT_EXEC) case, this off-by-one issue showed itself. Correct the off-by- one and add the explanation for the case we missed. Signed-off-by:
-
Dave Hansen authored
[ Upstream commit 6af17cf8 ] Under the covers, implement executable-only memory with protection keys when userspace calls mprotect(PROT_EXEC). But, we did not have a selftest for that. Now we do. Signed-off-by:
-
Dave Hansen authored
[ Upstream commit 3fcd2b2d ] We currently have an execute-only test, but it is for the explicit mprotect_pkey() interface. We will soon add a test for the implicit mprotect(PROT_EXEC) enterface. We need this code in both tests. Signed-off-by:
-
Dave Hansen authored
[ Upstream commit 7e7fd67c ] The exec-only pkey is allocated inside the kernel and userspace is not told what it is. So, allow PK faults to occur that have an unknown key. Signed-off-by:
-
Dave Hansen authored
[ Upstream commit a50093d6 ] There is some noisy debug code at the end of the signal handler. It was disabled by an early, unconditional "return". However, that return also hid a dprint_in_signal=0, which kept dprint_in_signal=1 and effectively locked us into permanent dprint_in_signal=1 behavior. Remove the return and the dead code, fixing dprint_in_signal. Signed-off-by:
-
Dave Hansen authored
[ Upstream commit 86b9eea2 ] If we use assert(), the program "crashes". That can be scary to users, so stop doing it. Just exit with a >0 exit code instead. Signed-off-by:
-
