- 28 May, 2018 24 commits
-
-
Nikolay Borisov authored
list_empty_careful usually is a signal of something tricky going on. Its usage in btrfs is actually not needed since both lists it's used on are local to a function and cannot be modified concurrently. So switch to plain list_empty. No functional changes. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Nikolay Borisov authored
This function is called only from btrfs_readpage and is already passed the mapping. Simplify its signature by moving the code obtaining reference to the extent tree in the function. No functional changes. Signed-off-by:
-
Nikolay Borisov authored
It's not used in the function so just remove it. No functional changes. Signed-off-by:
-
Nikolay Borisov authored
This function already gets the page from which the two extent trees are referenced. Simplify its signature by moving the code getting the trees inside the function. No functional changes. Signed-off-by:
-
Misono Tomohiro authored
Change the behavior of rmdir(2) and allow it to delete an empty subvolume by using btrfs_delete_subvolume() which is used by btrfs_ioctl_snap_destroy(). This is a change in behaviour and has been requested by users. Deleting the subvolume by ioctl requires root permissions while the rmdir way does works with standard tools and syscalls for all users that can access the subvolume. The main usecase is to allow 'rm -rf /path/with/subvols' to simply work. We were not able to find any nasty usability surprises, the intention is to do the destructive rm. Without allowing rmdir, this would have to be followed by the ioctl subvolume deletion, which is more of an annoyance. Implementation details: The required lock for @dir and inode of @dentry is already acquired in vfs layer. We need some check before deleting a subvolume. Permission check is done in vfs layer, emptiness check is in btrfs_rmdir() and additional check (i.e. neither the subvolume is a default subvolume nor send is in progress) is in btrfs_delete_subvolume(). Note that in btrfs_ioctl_snap_destroy(), d_delete() is called after btrfs_delete_subvolume(). For rmdir(2), d_delete() is called in vfs layer later. Tested-by:
Goffredo Baroncelli <kreijack@inwind.it> Signed-off-by:
Tomohiro Misono <misono.tomohiro@jp.fujitsu.com> Reviewed-by:
-
Misono Tomohiro authored
Factor out the second half of btrfs_ioctl_snap_destroy() as btrfs_delete_subvolume(), which performs some subvolume specific checks before deletion: 1. send is not in progress 2. the subvolume is not the default subvolume 3. the subvolume does not contain other subvolumes and actual deletion process. btrfs_delete_subvolume() requires inode_lock for both @dir and inode of @dentry. The remaining part of btrfs_ioctl_snap_destroy() is mainly permission checks. Note that call of d_delete() is not included in btrfs_delete_subvolume() as this function will also be used by btrfs_rmdir() to delete an empty subvolume and in that case d_delete() is called in VFS layer. As a result, btrfs_unlink_subvol() and may_destroy_subvol() become static functions. No functional changes. Signed-off-by:
-
Misono Tomohiro authored
This is a preparation work to refactor btrfs_ioctl_snap_destroy() and to allow rmdir(2) to delete an empty subvolume. Signed-off-by:
-
Howard McLauchlan authored
With commit b18253ec57c0 ("btrfs: optimize free space tree bitmap conversion"), there are no more callers to le_test_bit(). This patch removes le_test_bit(). Signed-off-by:Howard McLauchlan <hmclauchlan@fb.com> Signed-off-by:
-
Howard McLauchlan authored
Presently, convert_free_space_to_extents() does a linear scan of the bitmap. We can speed this up with find_next_{bit,zero_bit}_le(). This patch replaces the linear scan with find_next_{bit,zero_bit}_le(). Testing shows a 20-33% decrease in execution time for convert_free_space_to_extents(). Since we change bitmap to be unsigned long, we have to do some casting for the bitmap cursor. In le_bitmap_set() it makes sense to use u8, as we are doing bit operations. Everywhere else, we're just using it for pointer arithmetic and not directly accessing it, so char seems more appropriate. Suggested-by:Omar Sandoval <osandov@osandov.com> Signed-off-by:
-
Howard McLauchlan authored
le_bitmap_set() is only used by free-space-tree, so move it there and make it static. le_bitmap_clear() is not used, so remove it. Signed-off-by:
-
David Sterba authored
We really want to know to which filesystem the extent map events belong, but as it cannot be reached from the extent_map pointers, we need to pass it down the callchain. Reviewed-by:
-
David Sterba authored
Preparatory work to pass fs_info to btrfs_add_extent_mapping so we can get a better tracepoint message. Extent maps do not need fs_info for anything so we only add a dummy one without any other initialization. Reviewed-by:
-
David Sterba authored
Most of the strings are prefixed by the UUID of the filesystem that generates the message, however there are a few events that still opencode the macro magic and can be converted to the common macros. Reviewed-by:
-
David Sterba authored
The preferred style is to avoid spaces between key and value and no commas between key=values. Reviewed-by:
-
David Sterba authored
The (unsigned long long) casts are not necessary since long ago. Reviewed-by:
-
David Sterba authored
For consistency, use the %llu form. Reviewed-by:
-
David Sterba authored
The size of ino_t depends on 32/64bit architecture type. Btrfs stores the full 64bit inode anyway so we should use it. Reviewed-by:
-
Nikolay Borisov authored
The second if is really a subcase of ret being less than 0. So introduce a generic if (ret < 0) check, and inside have another if which explicitly handles the -ENOSPC and any other errors. No functional changes. Signed-off-by:
-
Nikolay Borisov authored
Locks should generally be released in the oppposite order they are acquired. Generally lock acquisiton ordering is used to ensure deadlocks don't happen. However, as becomes more complicated it's best to also maintain proper unlock order so as to avoid possible dead locks. This was found by code inspection and doesn't necessarily lead to a deadlock scenario. Signed-off-by:
-
Nikolay Borisov authored
Currently __endio_write_update_ordered uses labels to implement what is essentially a simple while loop. This makes the code more cumbersome to follow than it actually has to be. No functional changes. No xfstest regressions were found during testing. Signed-off-by:
-
Anand Jain authored
Adds comments about BTRFS_FS_EXCL_OP to existing comments about the device locks. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Nikolay Borisov authored
It's used to print its pointer in a debug statement but doesn't really bring any useful information to the error message. Signed-off-by:
-
Su Yue authored
The function btrfs_get_block_group_info() was introduced by the commit 5af3e8cc ("Btrfs: make filesystem read-only when submitting barrier fails") which used it in disk-io.c. However, the function is only called in ioctl.c now. Its parameter type btrfs_ioctl_space_info* is only for ioctl. So, make it static and rename it to be original name get_block_group_info. No functional change. Signed-off-by:
Su Yue <suy.fnst@cn.fujitsu.com> Signed-off-by:
-
Nikolay Borisov authored
add_pinned_bytes really cares whether the bytes being pinned are either data or metadata. To that effect it checks whether the 'owner' argument is less than BTRFS_FIRST_FREE_OBJECTID (256). This works because owner can really have 2 types of values: a) For metadata extents it holds the level at which the parent is in the btree. This amounts to owner having the values 0-7 b) In case of modifying data extents, owner is the inode number to which those extents belongs. Let's make this more explicit byt converting the owner parameter to a boolean value and either pass it directly when we know the type of extents we are working with (i.e. in btrfs_free_tree_block). In cases when the parent function can be called on both metadata/data extents perform the check in the caller. This hopefully makes the interface of add_pinned_bytes more intuitive. Signed-off-by:
-
- 27 May, 2018 2 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild fixes from Masahiro Yamada: - enable '-fno-tree-loop-im' only when supported - add '-fno-PIE' option before the asm-goto test * tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Makefile: disable PIE before testing asm goto kbuild: gcov: enable -fno-tree-loop-im if supported
-
- 26 May, 2018 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few more fixes for v4.17: - a fix for a crash in scm_call_atomic on qcom platforms - display fix for Allwinner A10 - a fix that re-enables ethernet on Allwinner H3 (C.H.I.P et al) - a fix for eMMC corruption on hikey - i2c-gpio descriptor tables for ixp4xx ... plus a small typo fix" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: Fix i2c-gpio GPIO descriptor tables arm64: dts: hikey: Fix eMMC corruption regression firmware: qcom: scm: Fix crash in qcom_scm_call_atomic1() ARM: sun8i: v3s: fix spelling mistake: "disbaled" -> "disabled" ARM: dts: sun4i: Fix incorrect clocks for displays ARM: dts: sun8i: h3: Re-enable EMAC on Orange Pi One
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 store buffer fixes from Thomas Gleixner: "Two fixes for the SSBD mitigation code: - expose SSBD properly to guests. This got broken when the CPU feature flags got reshuffled. - simplify the CPU detection logic to avoid duplicate entries in the tables" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation: Simplify the CPU bug detection logic KVM/VMX: Expose SSBD properly to guests -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Three fixes for scheduler and kthread code: - allow calling kthread_park() on an already parked thread - restore the sched_pi_setprio() tracepoint behaviour - clarify the unclear string for the scheduling domain debug output" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched, tracing: Fix trace_sched_pi_setprio() for deboosting kthread: Allow kthread_park() on a parked kthread sched/topology: Clarify root domain(s) debug string
-
git://github.com/hisilicon/linux-hisiOlof Johansson authored
ARM64: hisi fixes for 4.17 - Remove eMMC max-frequency property to fix eMMC corruption on hikey board * tag 'hisi-fixes-for-4.17v2' of git://github.com/hisilicon/linux-hisi: arm64: dts: hikey: Fix eMMC corruption regression Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Linus Walleij authored
I used bad names in my clumsiness when rewriting many board files to use GPIO descriptors instead of platform data. A few had the platform_device ID set to -1 which would indeed give the device name "i2c-gpio". But several had it set to >=0 which gives the names "i2c-gpio.0", "i2c-gpio.1" ... Fix the offending instances in the ARM tree. Sorry for the mess. Fixes: b2e63555 ("i2c: gpio: Convert to use descriptors") Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Simon Guinot <simon.guinot@sequanux.org> Reported-by:
Simon Guinot <simon.guinot@sequanux.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "PPC: - Close a hole which could possibly lead to the host timebase getting out of sync. - Three fixes relating to PTEs and TLB entries for radix guests. - Fix a bug which could lead to an interrupt never getting delivered to the guest, if it is pending for a guest vCPU when the vCPU gets offlined. s390: - Fix false negatives in VSIE validity check (Cc stable) x86: - Fix time drift of VMX preemption timer when a guest uses LAPIC timer in periodic mode (Cc stable) - Unconditionally expose CPUID.IA32_ARCH_CAPABILITIES to allow migration from hosts that don't need retpoline mitigation (Cc stable) - Fix guest crashes on reboot by properly coupling CR4.OSXSAVE and CPUID.OSXSAVE (Cc stable) - Report correct RIP after Hyper-V hypercall #UD (introduced in -rc6)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix #UD address of failed Hyper-V hypercalls kvm: x86: IA32_ARCH_CAPABILITIES is always supported KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed x86/kvm: fix LAPIC timer drift when guest uses periodic mode KVM: s390: vsie: fix < 8k check for the itdba KVM: PPC: Book 3S HV: Do ptesync in radix guest exit path KVM: PPC: Book3S HV: XIVE: Resend re-routed interrupts on CPU priority change KVM: PPC: Book3S HV: Make radix clear pte when unmapping KVM: PPC: Book3S HV: Make radix use correct tlbie sequence in kvmppc_radix_tlbie_page KVM: PPC: Book3S HV: Snapshot timebase offset on guest entry -
John Stultz authored
This patch is a partial revert of commit abd7d097 ("arm64: dts: hikey: Enable HS200 mode on eMMC") which has been causing eMMC corruption on my HiKey board. Symptoms usually looked like: mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) ... mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc0: new HS200 MMC card at address 0001 ... dwmmc_k3 f723d000.dwmmc0: Unexpected command timeout, state 3 mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) print_req_error: I/O error, dev mmcblk0, sector 8810504 Aborting journal on device mmcblk0p10-8. mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0) EXT4-fs error (device mmcblk0p10): ext4_journal_check_start:61: Detected aborted journal EXT4-fs (mmcblk0p10): Remounting filesystem read-only And quite often this would result in a disk that wouldn't properly boot even with older kernels. It seems the max-frequency property added by the above patch is causing the problem, so remove it. Cc: Ryan Grachek <ryan@edited.us> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: YongQin Liu <yongqin.liu@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Tested-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
Wei Xu <xuwei04@gmail.com>
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "16 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kasan: fix memory hotplug during boot kasan: free allocated shadow memory on MEM_CANCEL_ONLINE checkpatch: fix macro argument precedence test init/main.c: include <linux/mem_encrypt.h> kernel/sys.c: fix potential Spectre v1 issue mm/memory_hotplug: fix leftover use of struct page during hotplug proc: fix smaps and meminfo alignment mm: do not warn on offline nodes unless the specific node is explicitly requested mm, memory_hotplug: make has_unmovable_pages more robust mm/kasan: don't vfree() nonexistent vm_area MAINTAINERS: change hugetlbfs maintainer and update files ipc/shm: fix shmat() nil address after round-down when remapping Revert "ipc/shm: Fix shmat mmap nil-page protection" idr: fix invalid ptr dereference on item delete ocfs2: revert "ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio" mm: fix nr_rotate_swap leak in swapon() error case
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Let's begin the holiday weekend with some networking fixes: 1) Whoops need to restrict cfg80211 wiphy names even more to 64 bytes. From Eric Biggers. 2) Fix flags being ignored when using kernel_connect() with SCTP, from Xin Long. 3) Use after free in DCCP, from Alexey Kodanev. 4) Need to check rhltable_init() return value in ipmr code, from Eric Dumazet. 5) XDP handling fixes in virtio_net from Jason Wang. 6) Missing RTA_TABLE in rtm_ipv4_policy[], from Roopa Prabhu. 7) Need to use IRQ disabling spinlocks in mlx4_qp_lookup(), from Jack Morgenstein. 8) Prevent out-of-bounds speculation using indexes in BPF, from Daniel Borkmann. 9) Fix regression added by AF_PACKET link layer cure, from Willem de Bruijn. 10) Correct ENIC dma mask, from Govindarajulu Varadarajan. 11) Missing config options for PMTU tests, from Stefano Brivio" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits) ibmvnic: Fix partial success login retries selftests/net: Add missing config options for PMTU tests mlx4_core: allocate ICM memory in page size chunks enic: set DMA mask to 47 bit ppp: remove the PPPIOCDETACH ioctl ipv4: remove warning in ip_recv_error net : sched: cls_api: deal with egdev path only if needed vhost: synchronize IOTLB message with dev cleanup packet: fix reserve calculation net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands net/mlx5e: When RXFCS is set, add FCS data into checksum calculation bpf: properly enforce index mask to prevent out-of-bounds speculation net/mlx4: Fix irq-unsafe spinlock usage net: phy: broadcom: Fix bcm_write_exp() net: phy: broadcom: Fix auxiliary control register reads net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy net/mlx4: fix spelling mistake: "Inrerface" -> "Interface" and rephrase message ibmvnic: Only do H_EOI for mobility events tuntap: correctly set SOCKWQ_ASYNC_NOSPACE virtio-net: fix leaking page for gso packet during mergeable XDP ... -
David Hildenbrand authored
Using module_init() is wrong. E.g. ACPI adds and onlines memory before our memory notifier gets registered. This makes sure that ACPI memory detected during boot up will not result in a kernel crash. Easily reproducible with QEMU, just specify a DIMM when starting up. Link: http://lkml.kernel.org/r/20180522100756.18478-3-david@redhat.com Fixes: 786a8959 ("kasan: disable memory hotplug") Signed-off-by:
David Hildenbrand <david@redhat.com> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Hildenbrand authored
We have to free memory again when we cancel onlining, otherwise a later onlining attempt will fail. Link: http://lkml.kernel.org/r/20180522100756.18478-2-david@redhat.com Fixes: fa69b598 ("mm/kasan: add support for memory hotplug") Signed-off-by:
-
Joe Perches authored
checkpatch's macro argument precedence test is broken so fix it. Link: http://lkml.kernel.org/r/5dd900e9197febc1995604bb33c23c136d8b33ce.camel@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Mathieu Malaterre authored
In commit c7753208 ("x86, swiotlb: Add memory encryption support") a call to function `mem_encrypt_init' was added. Include prototype defined in header <linux/mem_encrypt.h> to prevent a warning reported during compilation with W=1: init/main.c:494:20: warning: no previous prototype for `mem_encrypt_init' [-Wmissing-prototypes] Link: http://lkml.kernel.org/r/20180522195533.31415-1-malat@debian.orgSigned-off-by:
Mathieu Malaterre <malat@debian.org> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Gargi Sharma <gs051095@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Gustavo A. R. Silva authored
`resource' can be controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: kernel/sys.c:1474 __do_compat_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) kernel/sys.c:1455 __do_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) Fix this by sanitizing *resource* before using it to index current->signal->rlim Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.comSigned-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
-
