- 11 Mar, 2016 1 commit
-
-
Amir Vadai authored
Cast pointer to unsigned long instead of u64, to fix compilation warning on 32 bit arch, spotted by 0day build. Fixes: 5b33f488 ("net/flower: Introduce hardware offload support") Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 10 Mar, 2016 39 commits
-
-
David S. Miller authored
Amir Vadai says: ==================== cls_flower hardware offload support Please see changes from V2 at the bottom. This patchset introduces cls_flower hardware offload support over ConnectX-4 driver, more hardware vendors are welcome to use it too. This patchset is based on John's infrastructure for tc offloading [2] to add hardware offload support to the flower filter. It also extends the support to an additional tc action - skbedit mark operation. NIC driver that was used is ConnectX-4. Feature is off by default and could be turned on using ethtool. Some commands to use this code: export TC=../iproute2/tc/tc export ETH=ens9 ethtool -K ens9 hw-tc-offload on $TC qdisc add dev $ETH ingress $TC filter add dev $ETH protocol ip prio 20 parent ffff: \ flower ip_proto 1 \ dst_mac 7c:fe:90:69:81:62 \ src_mac 7c:fe:90:69:81:56 \ dst_ip 11.11.11.11 \ src_ip 11.11.11.12 \ indev $ETH \ action drop $TC filter add dev $ETH protocol ip prio 30 parent ffff: \ flower ip_proto 6 \ indev $ETH \ action skbedit mark 0x1234 $TC filter add dev $ETH protocol ip prio 10 parent ffff: \ handle 0x1234 fw action pass The code was tested and applied on top of commit 3ebeac1d ("Merge branch 'cxgb4-next'") Changes from V2: - patch 1/10 ("net/flower: Introduce hardware offload support") - Remove unused variable [Dave] - Don't fail command when HW can't offload filter [John] - patch 3/10 ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef") - Mention in changelog that struct tc_action is now exposed out of the ifdef. - patch 4/10 ("net/act_skbedit: Utility functions for mark action") - Document clearly that is_tcf_skbedit_mark() is returning true if and only if the only action is mark [Dave] - patch 8/10 ("net/mlx5e: Introduce tc offload support") - make mlx5e_tc_add_flow() static Changes from V1: - patch 3/10 ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef") - fixed return value of tc_no_actions Changes from V0: - Use tc_no_actions and tc_for_each_action instead of ifdef CONFIG_NET_CLS_ACT - Replace ENOTSUPP (and some EINVAL) with EOPNOTSUPP - Name the flower command enum - fl_hw_destroy_filter() to return void - nobody uses the return value - mlx5e_tc_init() and mlx5e_tc_cleanup() to be called from the right places. - When adding HW rule fails - fail the command - Rules are added to be processed both by HW and SW unless SKIP_HW is given - Adding patch 6/10 ("net/mlx5e: Relax ndo_setup_tc handle restriction") Main changes from the RFC [1]: - API - Using ndo_setup_tc() instead of switchdev - act_skbedit, act_gact - Actions are not serialized to NIC driver, instead using access functions. - cls_flower - prevent double classification by software by not adding successfuly offloaded filters to the hashtable - Fixed some bugs in original RFC with rule delete - mlx5 - Adding flow table to kernel namespace instead of a new namespace - s/offload/tc/ in many places - no need for a special kconfig since switchdev is not used ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Introduce offloading of skbedit mark action. For example, to mark with 0x1234, all TCP (ip_proto 6) packets arriving to interface ens9: # tc qdisc add dev ens9 ingress # tc filter add dev ens9 protocol ip parent ffff: \ flower ip_proto 6 \ indev ens9 \ action skbedit mark 0x1234 Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Parse tc_cls_flower_offload into device specific commands and program the hardware to classify and act accordingly. For example, to drop ICMP (ip_proto 1) packets from specific smac, dmac, src_ip, src_ip, arriving to interface ens9: # tc qdisc add dev ens9 ingress # tc filter add dev ens9 protocol ip parent ffff: \ flower ip_proto 1 \ dst_mac 7c:fe:90:69:81:62 src_mac 7c:fe:90:69:81:56 \ dst_ip 11.11.11.11 src_ip 11.11.11.12 indev ens9 \ action drop Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Extend ndo_setup_tc() to support ingress tc offloading. Will be used by later patches to offload tc flower filter. Feature is off by default and could be enabled by issuing: # ethtool -K eth0 hw-tc-offload on Offloads flow table is dynamically created when first filter is added. Rules are saved in a hash table that is maintained by the consumer (for example - the flower offload in the next patch). When last filter is removed and no filters exist in the hash table, the offload flow table is destroyed. Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Move the vlan and main flow tables to use priority 1. This will allow the upcoming TC offload logic to use a higher priority (0) for the offload steering table. Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Restricting handle to TC_H_ROOT breaks the old instantiation of mqprio to setup a hardware qdisc. This patch relaxes the test, to only check the type. Fixes: 08fb1dac ("net/mlx5e: Support DCBNL IEEE ETS") Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
We need to handle flow table entry destinations only if the action associated with the rule is forwarding (MLX5_FLOW_CONTEXT_ACTION_FWD_DEST). Fixes: 26a81453 ('net/mlx5_core: Introduce flow steering firmware commands') Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Enable device drivers to query the action, if and only if is a mark action and what value to use for marking. Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Introduce the macros tc_no_actions and tc_for_each_action to make code clearer. Extracted struct tc_action out of the ifdef to make calls to is_tcf_gact_shot() and similar functions valid, even when it is a nop. Acked-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
John Fastabend <john.r.fastabend@intel.com> Suggested-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Will be used in a following patch to query if a key is being used, and what it's value in the target object. Acked-by:
John Fastabend <john.r.fastabend@intel.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
This patch is based on a patch made by John Fastabend. It adds support for offloading cls_flower. when NETIF_F_HW_TC is on: flags = 0 => Rule will be processed twice - by hardware, and if still relevant, by software. flags = SKIP_HW => Rull will be processed by software only If hardware fail/not capabale to apply the rule, operation will NOT fail. Filter will be processed by SW only. Acked-by:
Jiri Pirko <jiri@mellanox.com> Suggested-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
John Crispin says: ==================== net-next: mediatek: add ethernet driver This series adds support for the Mediatek ethernet core found on current ARM based SoCs. The driver works on MT2701 and MT7623 SoCs Instead of trying to upstream everything at once I decided to concentrate on the important parts required to make current generation silicon work. The V3 series only includes the code required to make dual MAC setups work and only supports the newer QDMA engine. Changes in V5 * reduce the mdio timeut to HZ * add a call to usleep_range() which schedules in the background. Changes in V4 * remove ugly _FE macro, use offsetof() instead Changes in V3 * only include code for MT2701/7623 support * drop support for PDMA and older MIPS based SoCs * drop switch support Changes in V2 * change the namespace of the functions from fe_* to mtk_* * add support for the latest generation of ARM SoCs * add dual MAC support * remove the swconfig specific bits * remove most of the magic values and replace them with defines * add verbose descriptions to the patches ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Crispin authored
Add myself and Felix as the Maintainers for the MediaTek ethernet driver. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Crispin authored
This patch adds the Makefile and Kconfig required to make the driver build. Signed-off-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Crispin authored
Add ethernet support for MediaTek SoCs from the MT7623 family. These have dual GMAC. Depending on the exact version, there might be a built-in Gigabit switch (MT7530). The core does not have the typical DMA ring setup. Instead there is a linked list that we add descriptors to. There is only one linked list that both MACs use together. There is a special field inside the TX descriptors called the VQID. This allows us to assign packets to different internal queues. By using a separate id for each MAC we are able to get deterministic results for BQL. Additionally we need to provide the core with a block of scratch memory that is the same size as the RX ring and data buffer. This is really needed to make the HW datapath work. Although the driver does not support this yet, we still need to assign the memory and tell the core about it for RX to work. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Michael Lee <igvtee@gmail.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Crispin authored
This adds the binding documentation for the MediaTek Ethernet controller. Signed-off-by:
John Crispin <blogic@openwrt.org> Acked-by:
Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neil Armstrong authored
The initial commit badly merged into the dsa_resume method instead of the dsa_remove_dst method. As consequence, the dst->master_netdev->dsa_ptr is not set to NULL on removal and re-bind of the dsa device fails with error -17. Fixes: b0dc635d ("net: dsa: cleanup resources upon module removal ") Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
'commit 55482edc ("qede: Add slowpath/fastpath support and enable hardware GRO")' introduces below error when compiling net-next with "make ARCH=x86_64" drivers/built-in.o: In function `qede_rx_int': qede_main.c:(.text+0x6101a0): undefined reference to `tcp_gro_complete' Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Rajesh Borundia says: ==================== qlcnic fixes This series adds following fixes. o While processing mailbox if driver gets a spurious mailbox interrupt it leads into premature completion of a next mailbox request. Added a guard against this by checking current state of mailbox and ignored spurious interrupt. Added a stats counter to record this condition. v2: o Added patch that removes usage of atomic_t as we are not implemeting atomicity by using atomic_t value. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rajesh Borundia authored
o While the driver is in the middle of a MB completion processing and it receives a spurious MB interrupt, it is mistaken as a good MB completion interrupt leading to premature completion of the next MB request. Fix the driver to guard against this by checking the current state of MB processing and ignore the spurious interrupt. Also added a stats counter to record this condition. Signed-off-by:
Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rajesh Borundia authored
o atomic_t usage is incorrect as we are not implementing any atomicity. Signed-off-by:
Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hariprasad Shenai says: ==================== cxgb4vf: Interrupt and queue configuration changes This series fixes some issues and some changes in the queue and interrupt configuration for cxgb4vf driver. We need to enable interrupts before we register our network device, so that we don't loose link up interrupts. Allocate rx queues based on interrupt type. Set number of tx/rx queues in probe function only. Also adds check for some invalid configurations. This patch series has been created against net-next tree and includes patches on cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
The Queue Set Configuration code was always reserving room for a Forwarded interrupt Queue even in the cases where we weren't using it. Figure out how many Ports and Queue Sets we can support. This depends on knowing our Virtual Function Resources and may be called a second time if we fall back from MSI-X to MSI Interrupt Mode. This change fixes that problem. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
This avoids a race condition where a system that has network devices set up to be automatically configured and we get the first Port Link Status message from the firmware on the Asynchronous Firmware Event Queue before we've enabled interrupts. If that happens, we end up losing the interrupt and never realizing that the links has actually come up. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
There is no need to change the 802.1Q port mode for the same value. Thus avoid such message: [ 401.954836] dsa dsa@0 lan0: 802.1Q Mode: Disabled (was Disabled) Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Tested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
The port register 0x07 contains more options than just the default VID, even though they are not used yet. So prefer a read then write operation over a direct write. This also allows to keep track of the change through dynamic debug. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Tested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Apply a few non-functional changes on the port state setter: * add a dynamic debug message with state names to track changes * explicit states checking instead of assuming their numeric values * lock mutex only once when changing several port states * use bitmap macros to declare and access port_state_update_mask Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Tested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sergei Shtylyov says: ==================== sh_eth: fix couple of bugs in sh_eth_ring_format() Here's a set of 2 patches against DaveM's 'net.git' repo fixing two bugs in sh_eth_.ring_format()... [1/2] sh_eth: fix NULL pointer dereference in sh_eth_ring_format() [2/2] sh_eth: advance 'rxdesc' later in sh_eth_ring_format() ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
Iff dma_map_single() fails, 'rxdesc' should point to the last filled RX descriptor, so that it can be marked as the last one, however the driver would have already advanced it by that time. In order to fix that, only fill an RX descriptor once all the data for it is ready. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
In a low memory situation, if netdev_alloc_skb() fails on a first RX ring loop iteration in sh_eth_ring_format(), 'rxdesc' is still NULL. Avoid kernel oops by adding the 'rxdesc' check after the loop. Reported-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The stub helper functions for the newly added kcm_proc_init/exit interfaces are defined as 'static' in a header file, which leads to build warnings for each file that includes them without calling them: include/net/kcm.h:183:12: error: 'kcm_proc_init' defined but not used [-Werror=unused-function] include/net/kcm.h:184:13: error: 'kcm_proc_exit' defined but not used [-Werror=unused-function] This marks the two functions as 'static inline' instead, which avoids the warnings and is obviously what was meant here. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: cd6e111b ("kcm: Add statistics and proc interfaces") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.6-20160310' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2016-03-10 this is a pull request of 5 patch for net-next/master. Marek Vasut contributes 4 patches for the ifi CAN driver, which makes it work on real hardware. There is one patch by Ramesh Shanmugasundaram for the rcar_can driver that adds support for the 3rd generation IP core. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ramesh Shanmugasundaram authored
Added r8a7795 SoC support. Signed-off-by:
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marek Vasut authored
In case of CAN2.0 EFF frame, the controller handles frame IDs in a rather bizzare way. The ID is split into an extended part, IDX[28:11] and standard part, ID[10:0]. In the TX path, the core first sends the top 11 bits of the IDX, followed by ID and finally the rest of IDX. In the RX path, the core stores the ID the LSbit part of IDX field, followed by the LSbit parts of real IDX. The MSbit parts of IDX are stored in ID field of the register. This patch implements the necessary bit shuffling to mitigate this obscure behavior. In case two of these controllers are connected together, the RX and TX bit swapping nullifies itself and the issue does not manifest. The issue only manifests when talking to another different CAN controller. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Reviewed-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marek Vasut authored
The RX and TX ID mask for CAN2.0 is 11 bits wide. This patch fixes the incorrect mask, which caused the CAN IDs to miss the MSBit both on receive and transmit. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Reviewed-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marek Vasut authored
The TX DLC, the transmission length information, was not written into the transmit configuration register. When using the CAN core with different CAN controller, the receiving CAN controller will receive only the ID part of the CAN frame, but no data at all. This patch adds the TX DLC into the register to fix this issue. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Reviewed-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marek Vasut authored
The clock generation does not match reality when using the CAN IP core outside of the FPGA design. This patch fixes the computation of values which are programmed into the clock generator registers. First, there are some off-by-one errors which manifest themselves only when communicating with different controller, so those are fixed. Second, the bits in the clock generator registers have different meaning depending on whether the core is in ISO CANFD mode or any of the other modes (BOSCH CANFD or CAN2.0). Detect the ISO CANFD mode and fix handling of this special case of clock configuration. Finally, the CAN clock speed is in CANCLOCK register, not SYSCLOCK register, so fix this as well. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Reviewed-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-