- 10 Sep, 2015 3 commits
-
-
Gaurav K Singh authored
Just like single link MIPI panels, similarly for dual link panels, pipe to be configured is based on the DVO port from VBT Block 2. In hardware, Port A is mapped with Pipe A and Port C is mapped with Pipe B. This issue got introduced in - commit 7e9804fd Author: Jani Nikula <jani.nikula@intel.com> Date: Fri Jan 16 14:27:23 2015 +0200 drm/i915/dsi: add drm mipi dsi host support Cc: stable@vger.kernel.org # v4.0 Signed-off-by:
Gaurav K Singh <gaurav.k.singh@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
If one disables DDR DVFS in the BIOS, Punit will apparently ignores all DDR DVFS request. Currently we assume that DDR DVFS is always operational, which leads to errors in dmesg when the DDR DVFS requests time out. Fix the problem by gently prodding Punit during driver load to find out whether it will respond to DDR DVFS requests. If the request times out, we assume that DDR DVFS has been permanenly disabled in the BIOS and no longer perster the Punit about it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91629Signed-off-by:
Clint Taylor <Clinton.A.Taylor@intel.com> Tested-by:
-
Takashi Iwai authored
Fix a wrong logical AND (&&) used for the range check of CSR MMIO. Spotted nicely by gcc -Wlogical-op flag: drivers/gpu/drm/i915/intel_csr.c: In function ‘finish_csr_load’: drivers/gpu/drm/i915/intel_csr.c:353:41: warning: logical ‘and’ of mutually exclusive tests is always false [-Wlogical-op] Fixes: eb805623 ('drm/i915/skl: Add support to load SKL CSR firmware.') Cc: <stable@vger.kernel.org> # v4.2 Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Animesh Manna <animesh.manna@intel.com> Signed-off-by:
-
- 09 Sep, 2015 1 commit
-
-
Chris Wilson authored
In I915_READ64_2x32 we attempt to read a 64bit register using 2 32bit reads. Due to the nature of the registers we try to read in this manner, they may increment between the two instruction (e.g. a timestamp counter). To keep the result accurate, we repeat the read if we detect an overflow (i.e. the upper value varies). However, some hardware is just plain flaky and may endless loop as the the upper 32bits are not stable. Just give up after a couple of tries and report whatever we read last. v2: Use the most recent values when erring out on an unstable register. Reported-by: russianneuromancer@ya.ru Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91906Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by:
-
- 08 Sep, 2015 1 commit
-
-
Maarten Lankhorst authored
connector->encoder is initialized as NULL. Fix this by setting it in during pre enable. MST connectors are not read out during initial hw readout, and have no fixed encoder mappings. So it's harmless to return false when the connector has never been assigned to an encoder. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by:
-
- 02 Sep, 2015 3 commits
-
-
Ville Syrjälä authored
Pass the correct hpd[] array to intel_get_hpd_pins() on pre-g4x platforms. This got broken in the following commit: commit fd63e2a9 Author: Imre Deak <imre.deak@intel.com> Date: Tue Jul 21 15:32:44 2015 -0700 drm/i915: combine i9xx_get_hpd_pins and pch_get_hpd_pins Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Egbert Eich <eich@suse.de> Signed-off-by:
-
Artem Savkov authored
commit 346add78 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jul 14 18:07:30 2015 +0200 drm/i915: Use expcitly fixed type in compat32 structs changed the type of param field in drm_i915_getparam from int to s32. This header is exported to userspace and needs to use userspace type __s32 instead. This fixes userspace compilation errors like the following: include/drm/i915_drm.h:361:2: error: unknown type name 's32' s32 param; Signed-off-by:
Artem Savkov <asavkov@redhat.com> Reviewed-by:
-
Chris Wilson authored
There have been many hard to track down bugs whereby userspace forgot to flag a write buffer and then cause graphics corruption or a hung GPU when that buffer was later purged under memory pressure (as the buffer appeared clean, its pages would have been evicted rather than preserved and any changes more recent than in the backing storage would be lost). In retrospect this is a rare optimisation against memory pressure, already the slow path. If we always mark the buffer as dirty when accessed by the GPU, anything not used can still be evicted cheaply (ideal behaviour for mark-and-sweep eviction) but we do not run the risk of corruption. For correct read serialisation, userspace still has to notify when the GPU writes to an object. However, there are certain situations under which userspace may wish to tell white lies to the kernel... Signed-off-by:
-
- 01 Sep, 2015 3 commits
-
-
Ander Conselvan de Oliveira authored
The DP MST encoder config function never sets ddi_pll_sel, even though its value is programmed in its ->pre_enable() hook. That used to work because a new pipe_config was kzalloc'ed at every modeset, and the value of zero selects the highest clock for the PLL. Starting with the commit below, the value of ddi_pll_sel is preserved through modesets, and since the correct value wasn't properly setup by the MST code, it could lead to warnings and blank screens. commit 8504c74c Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Date: Fri May 15 11:51:50 2015 +0300 drm/i915: Preserve ddi_pll_sel when allocating new pipe_config Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91628 Cc: stable@vger.kernel.org # 7e6313a2 drm/i915: Don't use link_bw for PLL setup Cc: stable@vger.kernel.org Cc: Timo Aaltonen <tjaalton@ubuntu.com> Cc: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Use port_clock instead of link_bw when picking the PLL parameters for DP. link_bw may be zero with an eDP 1.4 sink that supports DP_LINK_RATE_SET so we shouldn't use it for anything other than feed it to the sink appropriately. v2: Fix typo in commit message (Sivakumar) Reviewed-by:
Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by:
-
Lukas Wunner authored
Commit 92122789 ("drm/i915: preserve SSC if previously set v3") added code to intel_modeset_gem_init to override the SSC status read from VBT with the SSC status set by BIOS. However, intel_modeset_gem_init is invoked *after* intel_modeset_init, which calls intel_setup_outputs, which *modifies* SSC status by way of intel_init_pch_refclk. So unlike advertised, intel_modeset_gem_init doesn't preserve the SSC status set by BIOS but whatever intel_init_pch_refclk decided on. This is a problem on dual gpu laptops such as the MacBook Pro which require either a handler to switch DDC lines, or the discrete gpu to proxy DDC/AUX communication: Both the handler and the discrete gpu may initialize after the i915 driver, and consequently, an LVDS connector may initially seem disconnected and the SSC therefore is disabled by intel_init_pch_refclk, but on reprobe the connector may turn out to be connected and the SSC must then be enabled. Due to 92122789 however, the SSC is not enabled on reprobe since it is assumed BIOS disabled it while in fact it was disabled by intel_init_pch_refclk. Also, because the SSC status is preserved so late, the preserved value only ever gets used on resume but not on panel initialization: intel_modeset_init calls intel_init_display which indirectly calls intel_panel_use_ssc via multiple subroutines, *before* the BIOS value overrides the VBT value in intel_modeset_gem_init (intel_panel_use_ssc is the sole user of dev_priv->vbt.lvds_use_ssc). Fix this by moving the code introduced by 92122789 from intel_modeset_gem_init to intel_modeset_init before the invocation of intel_setup_outputs and intel_init_display. Add a DRM_DEBUG_KMS as suggested way back by Jani: http://lists.freedesktop.org/archives/intel-gfx/2014-June/046666.html Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by:
Paul Hordiienko <pvt.gord@gmail.com> [MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina] Tested-by:
William Brown <william@blackhats.net.au> [MBP 8,2 2011 intel SNB + amd turks pre-retina] Tested-by:
Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina] Tested-by:
Bruno Bierbaumer <bruno@bierbaumer.net> [MBP 11,3 2013 intel HSW + nvidia GK107 retina -- work in progress] Fixes: 92122789 ("drm/i915: preserve SSC if previously set v3") Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
- 31 Aug, 2015 6 commits
-
-
Xiong Zhang authored
From B spec, DDI_E port belong to PowerWell 2, but DDI_E share the powerwell_req/staus register bit with DDI_A which belong to DDI_A_E_POWER_WELL. In order to communicate with the connector on DDI-E, both DDI_A_E_POWER_WELL and POWER_WELL_2 must be enabled. Currently intel_dp_power_get(DDI_E) only enable DDI_A_E_POWER_WELL, this patch will not only enable DDI_a_E_POWER_WELL but also enable POWER_WELL_2. This patch also fix the DDI-E hotplug function. Signed-off-by:
Xiong Zhang <xiong.y.zhang@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
Enable eDP on DDI-E. Also let's remove duplicated definitions to avoid later confusion. Signed-off-by:
-
Rodrigo Vivi authored
There are OEMs using DDI-E out there, so let's enable it. Unfortunately there is no detection bit for DDI-E So we need to rely on VBT for that. I also need to give credits to Xiong since before seing his approach to check info->support_* I was creating an ugly vbt->ddie_sfuse_strap in order to propagate the ddi presence info v2: Rebased as last patch in the series. since all other patches in this series are needed for anything working propperly on DDI-E. Credits-to: "Zhang, Xiong Y" <xiong.y.zhang@intel.com> Cc: "Zhang, Xiong Y" <xiong.y.zhang@intel.com> Reviewed-by:
-
Xiong Zhang authored
DDI-E doesn't have the correspondent GMBUS pin. We rely on VBT to tell us which one it being used instead. The DVI/HDMI on shared port couldn't exist. This patch isn't tested without hardware wchich has HDMI on DDI-E. v2: fix trailing whitespace v3: MISSING_CASE take place of BUG() Signed-off-by:
-
Imre Deak authored
commit da2bc1b9 Author: Imre Deak <imre.deak@intel.com> Date: Thu Oct 23 19:23:26 2014 +0300 drm/i915: add poweroff_late handler introduced a regression on old platforms during hibernation. A workaround was added in commit ab3be73f Author: Imre Deak <imre.deak@intel.com> Date: Mon Mar 2 13:04:41 2015 +0200 drm/i915: gen4: work around hang during hibernation using an explicit blacklist for the GENs/BIOS vendors where the issue was reported. Later there we had reports of the same failure on platforms not on this list. To my best knowledge the correct thing to do is still to put the device to PCI D3 state during hibernation, see [1] and [2] for the reasons. This also aligns with our future plans to unify more the runtime and system suspend/resume paths. Since an exact blacklist seems to be impractical (multiple GENs and BIOS vendors are affected) apply the workaround on everything pre GEN6. [1] http://lists.freedesktop.org/archives/intel-gfx/2015-February/060710.html [2] https://lkml.org/lkml/2015/6/22/274 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95061Reported-by:
Ilya Tumaykin <itumaykin@gmail.com> Reported-by:
Dirk Griesbach <spamthis@freenet.de> Reported-by:
Pavel Machek <pavel@ucw.cz> Reported-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Tested-by:
Paul Bolle <pebolle@tiscali.nl> CC: stable@vger.kernel.org Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Ville Syrjälä authored
We are no longer checkling the DP link status on long hpd. We used to do that from the .hot_plug() handler, but it was removed when MST got introduced. If there's no userspace we now fail to retrain the link if the sink power is toggled (or cable yanked and replugged), meaning the user is left staring at a blank screen. With the retraining put back that should be fixed. Also remove the leftover comment that referred to the old retraining from .hot_plug(). Fixes a regression introduced in: commit 0e32b39c Author: Dave Airlie <airlied@redhat.com> Date: Fri May 2 14:02:48 2014 +1000 drm/i915: add DP 1.2 MST support (v0.7) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89453Tested-by:
Palmer Dabbelt <palmer@dabbelt.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91407 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89461 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89594 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85641 Cc: Dave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 28 Aug, 2015 1 commit
-
-
Gary Wang authored
Since BIOS RC 1.4 it would enable CDCLK PLL during BIOS S3 resume, then driver needs to set CDCLK to avoid display corruption if DPLL0 enabled. References: https://bugs.freedesktop.org/show_bug.cgi?id=91697Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Reviewed-by:
Cooper Chiou <cooper.chiou@intel.com> Reviewed-by:
Wei Shun Chang <wei.shun.chang@intel.com> Tested-by:
Gary Wang <gary.c.wang@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gavin Hindman <gavin.hindman@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Xiong Y Zhang <xiong.y.zhang@intel.com> Signed-off-by:
-
- 26 Aug, 2015 3 commits
-
-
Xiong Zhang authored
v2: fix one error found by checkpath.pl v3: Add one ignored break for switch-case. DDI-E hotplug function doesn't work after updating drm-intel tree, I checked the code and found this missing which isn't the root cause for broke DDI-E hp. The broken DDI-E hp function is fixed by "Adding DDI_E power well domain". Signed-off-by:Timo Aaltonen <timo.aaltonen@canonical.com> Signed-off-by:
-
Thierry Reding authored
The gtt.stolen_size field is of type size_t, and so should be printed using %zu to avoid build warnings on either 32-bit and 64-bit builds. Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
-
Rodrigo Vivi authored
SKL-Y can now use the same programming for all VccIO values after an adjustment to I_boost. SKL-U DP table adjustments. 1. Remove SKL Y 0.95V from "SKL H and S" columns in all tables. The other SKL Y column removes the "0.85V VccIO" so it now applies to all voltages. 2. DP table changes SKL U 400mV+0db dword 0 value from 2016h to 201Bh. 3. DP table changes SKL U 600mv+0db dword 0 value from 2016h to 201Bh. 4. DP table increases I_boost to level 3 for SKL Y 400mv+9.5db. v2: Fix compilation warnings as pointed by Paulo. Reference: Graphics Spec Change r97962 Cc: Arthur Runyan <arthur.j.runyan@intel.com> Signed-off-by:
-
- 24 Aug, 2015 8 commits
-
-
David Weinehall authored
VBT version 196 increased the size of common_child_dev_config. The parser code assumed that the size of this structure would not change. The modified code now copies the amount needed based on the VBT version, and emits a debug message if the VBT version is unknown (too new); since the struct config block won't shrink in newer versions it should be harmless to copy the maximum known size in such cases, so that's what we do, but emitting the warning is probably sensible anyway. In the longer run it might make sense to modify the parser code to use a version/feature mapping, rather than hardcoding things like this, but for now the variants are fairly manageable. This fixes a regression introduced in commit 75067dde Author: Antti Koskipaa <antti.koskipaa@linux.intel.com> Date: Fri Jul 10 14:10:55 2015 +0300 drm/i915: Per-DDI I_boost override since that commit changed the child device config size without updating the checks and memcpy. v2: Stricter size checks v3 by Jani: - Keep the checks strict, and warnigns verbose, but keep going anyway. - Take care to copy the max amount of child device config we can. - Fix the messages. Signed-off-by:
David Weinehall <david.weinehall@linux.intel.com> Reviewed-by:
-
Thulasimani,Sivakumar authored
This patch fixes the bug that SKL SKUs before B0 might return HBR2 as supported even though it is not supposed to be enabled on such platforms. v2: optimize if else condition (Jani) Reviewed-by:
-
Jani Nikula authored
commit 75067dde Author: Antti Koskipaa <antti.koskipaa@linux.intel.com> Date: Fri Jul 10 14:10:55 2015 +0300 drm/i915: Per-DDI I_boost override increased size of union child_device_config without taking into account the size check in parse_sdvo_device_mapping(). Switch the function over to using the legacy struct only. Fixes: 75067dde ("drm/i915: Per-DDI I_boost override") Cc: Antti Koskipaa <antti.koskipaa@linux.intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Reviewed-by:
-
Dave Airlie authored
Linux 4.2-rc8 Backmerge required for Intel so they can fix their -next tree up properly.
-
Linus Torvalds authored
-
Mathieu Larouche authored
- Added PLL algorithm for a new rev of G200e - Removed the bandwidth limitation for the new G200e Signed-off-by:
Mathieu Larouche <mathieu.larouche@matrox.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Mathieu Larouche authored
- Added support for the new deviceID for G200eW3 - Added PLL algorithm for the G200eW3 - Added some initialization code for G200eW3 Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "A couple of major (hang and deadlock) fixes with fortunately fairly rare triggering conditions. The PM oops is only really triggered by people using enclosure services (rare) and the fnic driver is mostly used in enterprise environments" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: SCSI: Fix NULL pointer dereference in runtime PM fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack
-
- 23 Aug, 2015 3 commits
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS bug fixes from Ralf Baechle: "Two more fixes for 4.2. One fixes a build issue with the LLVM assembler - LLVM assembler macro names are case sensitive, GNU as macro names are insensitive; the other corrects a license string (GPL v2, not GPLv2) such that the module loader will recognice the license correctly" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: FIRMWARE: bcm47xx_nvram: Fix module license. MIPS: Fix LLVM build issue.
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull 9p regression fix from Al Viro: "Fix for breakage introduced when switching p9_client_{read,write}() to struct iov_iter * (went into 4.1)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: 9p: ensure err is initialized to 0 in p9_client_read/write -
Vincent Bernat authored
Some use of those functions were providing unitialized values to those functions. Notably, when reading 0 bytes from an empty file on a 9P filesystem, the return code of read() was not 0. Tested with this simple program: #include <assert.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> int main(int argc, const char **argv) { assert(argc == 2); char buffer[256]; int fd = open(argv[1], O_RDONLY|O_NOCTTY); assert(fd >= 0); assert(read(fd, buffer, 0) == 0); return 0; } Cc: stable@vger.kernel.org # v4.1 Signed-off-by:Vincent Bernat <vincent@bernat.im> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- 22 Aug, 2015 7 commits
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Another couple of small ARM fixes. A patch from Masahiro Yamada who noticed that "make -jN all zImage" would end up generating bad images where N > 1, and a patch from Nicolas to fix the Marvell CPU user access optimisation code when page faults are disabled" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8418/1: add boot image dependencies to not generate invalid images ARM: 8414/1: __copy_to_user_memcpy: fix mmap semaphore usage
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Various low level fixes: fix more fallout from the FPU rework and the asm entry code rework, plus an MSI rework fix, and an idle-tracing fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/math-emu: Fix crash in fork() x86/fpu/math-emu: Fix math-emu boot crash x86/idle: Restore trace_cpu_idle to mwait_idle() calls x86/irq: Build correct vector mapping for multiple MSI interrupts Revert "sched/x86_64: Don't save flags on context switch"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Tooling fixes: a 'perf record' deadlock fix plus debuggability fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf top: Show backtrace when handling a SIGSEGV on --stdio mode perf tools: Fix buildid processing perf tools: Make fork event processing more resilient perf tools: Avoid deadlock when map_groups are broken
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A series of small fixlets for a regression visible on OMAP devices caused by the conversion of the OMAP interrupt chips to hierarchical interrupt domains. Mostly one liners on the driver side plus a small helper function in the core to avoid open coded mess in the drivers" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/crossbar: Restore set_wake functionality irqchip/crossbar: Restore the mask on suspend behaviour ARM: OMAP: wakeupgen: Restore the irq_set_type() mechanism irqchip/crossbar: Restore the irq_set_type() mechanism genirq: Introduce irq_chip_set_type_parent() helper genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchy
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "Two minimalistic fixes for 4.2 regressions: - Eric fixed a thinko in the timer_list base switching code caused by the overhaul of the timer wheel. It can cause a cpu to see the wrong base for a timer while we move the timer around. - Guenter fixed a regression for IMX if booted w/o device tree, where the timer interrupt is not initialized and therefor the machine fails to boot" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/imx: Fix boot with non-DT systems timer: Write timer->flags atomically -
Ingo Molnar authored
During later stages of math-emu bootup the following crash triggers: math_emulate: 0060:c100d0a8 Kernel panic - not syncing: Math emulation needed in kernel CPU: 0 PID: 1511 Comm: login Not tainted 4.2.0-rc7+ #1012 [...] Call Trace: [<c181d50d>] dump_stack+0x41/0x52 [<c181c918>] panic+0x77/0x189 [<c1003530>] ? math_error+0x140/0x140 [<c164c2d7>] math_emulate+0xba7/0xbd0 [<c100d0a8>] ? fpu__copy+0x138/0x1c0 [<c1109c3c>] ? __alloc_pages_nodemask+0x12c/0x870 [<c136ac20>] ? proc_clear_tty+0x40/0x70 [<c136ac6e>] ? session_clear_tty+0x1e/0x30 [<c1003530>] ? math_error+0x140/0x140 [<c1003575>] do_device_not_available+0x45/0x70 [<c100d0a8>] ? fpu__copy+0x138/0x1c0 [<c18258e6>] error_code+0x5a/0x60 [<c1003530>] ? math_error+0x140/0x140 [<c100d0a8>] ? fpu__copy+0x138/0x1c0 [<c100c205>] arch_dup_task_struct+0x25/0x30 [<c1048cea>] copy_process.part.51+0xea/0x1480 [<c115a8e5>] ? dput+0x175/0x200 [<c136af70>] ? no_tty+0x30/0x30 [<c1157242>] ? do_vfs_ioctl+0x322/0x540 [<c104a21a>] _do_fork+0xca/0x340 [<c1057b06>] ? SyS_rt_sigaction+0x66/0x90 [<c104a557>] SyS_clone+0x27/0x30 [<c1824a80>] sysenter_do_call+0x12/0x12 The reason is the incorrect assumption in fpu_copy(), that FNSAVE can be executed from math-emu kernels as well. Don't try to copy the registers, the soft state will be copied by fork anyway, so the child task inherits the parent task's soft math state. With this fix applied math-emu kernels boot up fine on modern hardware and the 'no387 nofxsr' boot options. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
On a math-emu bootup the following crash occurs: Initializing CPU#0 ------------[ cut here ]------------ kernel BUG at arch/x86/kernel/traps.c:779! invalid opcode: 0000 [#1] SMP [...] EIP is at do_device_not_available+0xe/0x70 [...] Call Trace: [<c18238e6>] error_code+0x5a/0x60 [<c1002bd0>] ? math_error+0x140/0x140 [<c100bbd9>] ? fpu__init_cpu+0x59/0xa0 [<c1012322>] cpu_init+0x202/0x330 [<c104509f>] ? __native_set_fixmap+0x1f/0x30 [<c1b56ab0>] trap_init+0x305/0x346 [<c1b548af>] start_kernel+0x1a5/0x35d [<c1b542b4>] i386_start_kernel+0x82/0x86 The reason is that in the following commit: b1276c48 ("x86/fpu: Initialize fpregs in fpu__init_cpu_generic()") I failed to consider math-emu's limitation that it cannot execute the FNINIT instruction in kernel mode. The long term fix might be to allow math-emu to execute (certain) kernel mode FPU instructions, but for now apply the safe (albeit somewhat ugly) fix: initialize the emulation state explicitly without trapping out to the FPU emulator. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
- 21 Aug, 2015 1 commit
-
-
Christoph Hellwig authored
While the idea behind get_maintainer seems highly useful it's unfortunately way to trigger happy to grab people that once had a few commits to files. For someone like me who does a lot of tree-wide API work that leads to an incredible amount of Cc spam. Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
