- 27 Sep, 2022 5 commits
-
-
Rolf Eike Beer authored
I can't find a reference to it in the entire git history. Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by:
Sean Anderson <seanga2@gmail.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Yang Yingliang says: ==================== net: dsa: remove unnecessary i2c_set_clientdata() This patchset https://lore.kernel.org/all/20220921140524.3831101-8-yangyingliang@huawei.com/T/ removed all set_drvdata(NULL) in driver remove function. i2c_set_clientdata() is another wrapper of set drvdata function, to follow the same convention, remove i2c_set_clientdata() called in driver remove function in drivers/net/dsa/. ==================== Link: https://lore.kernel.org/r/20220923143742.87093-1-yangyingliang@huawei.comSigned-off-by:
-
Yang Yingliang authored
Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data will be set to NULL in device_unbind_cleanup() after calling ->remove(). Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Yang Yingliang authored
Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data will be set to NULL in device_unbind_cleanup() after calling ->remove(). Signed-off-by:
-
Yang Yingliang authored
Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data will be set to NULL in device_unbind_cleanup() after calling ->remove(). Signed-off-by:
-
- 26 Sep, 2022 29 commits
-
-
Jesper Dangaard Brouer authored
Practical experience (and advice from Alexei) tell us that bitfields in structs lead to un-optimized assembly code. I've verified this change does lead to better x86_64 assembly, both via objdump and playing with code snippets in godbolt.org. Using scripts/bloat-o-meter shows the code size is reduced with 24 bytes for xdp_convert_buff_to_frame() that gets inlined e.g. in i40e_xmit_xdp_tx_ring() which were used for microbenchmarking. Microbenchmarking results do show improvements, but very small and varying between 0.5 to 2 nanosec improvement per packet. The member @metasize is changed from u8 to u32. Future users of this area could split this into two u16 fields. I've also benchmarked with two u16 fields showing equal performance gains and code size reduction. The moved member @frame_sz doesn't change sizeof struct due to existing padding. Like xdp_buff member @frame_sz is placed next to @flags, which allows compiler to optimize assignment of these. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/r/166393728005.2213882.4162674859542409548.stgit@firesoulSigned-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Improve tsn_lib selftests for future distributed tasks Some of the boards I am working with are limited in the number of ports that they offer, and as more TSN related selftests are added, it is important to be able to distribute the work among multiple boards. A large part of implementing that is ensuring network-wide synchronization, but also permitting more streams of data to flow through the network. There is the more important aspect of also coordinating the timing characteristics of those streams, and that is also something that is tackled, although not in this modest patch set. The goal here is not to introduce new selftests yet, but just to lay a better foundation for them. These patches are a part of the cleanup work I've done while working on selftests for frame preemption. They are regression-tested with psfp.sh. ==================== Link: https://lore.kernel.org/r/20220923210016.3406301-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
We can make the phc2sys helper not only synchronize a PHC to CLOCK_REALTIME, which is what it currently does, but also CLOCK_REALTIME to a PHC, which is going to be needed in distributed TSN tests. Instead of making the complexity of the arguments passed to phc2sys_start() explode, we can let it figure out the sync direction automatically, based on ptp4l's port states. Towards that goal, pass just the path to the desired ptp4l instance's UNIX domain socket, and remove the $if_name argument (from which it derives the PHC). Also adapt the one caller from the ocelot psfp.sh test. In the case of psfp.sh, phc2sys_start is able to properly figure out that CLOCK_REALTIME is the source clock and swp1's PHC is the destination, because of the way in which ptp4l_start for the UDS_ADDRESS_SWP1 was called: with slave_only=false, so it will always win the BMCA and always become the sync master between itself and $h1. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by:
-
Vladimir Oltean authored
Move the PID variable for the isochron receiver into a separate namespace per stats port, to allow multiple receivers (and/or orchestration daemons) to be instantiated by the same script. Preserve the existing behavior by making isochron_do() use the default stats TCP port of 5000. Signed-off-by:
-
Vladimir Oltean authored
Switch ports will want to act as Boundary Clocks, which are configured using ptp4l by specifying the "-i" argument multiple times. Since we track a log file and a pid file for each ptp4l instance, and we want to be compatible with the existing single-port callers of ptp4l_start and ptp4l_stop, pass the interface list as a single string of space-separated values. Based on this, we create a label for each ptp4l instance, where the spaces are replaced with underscores (ptp4l_start "eth0 eth1" generates "ptp4l_pid_eth0_eth1"). Signed-off-by:
-
Vladimir Oltean authored
The extra_args argument ($3) of isochron_recv_start is overwritten with uds ($2), if that argument exists. This is currently not a problem, because the only TSN selftest (ocelot/psfp.sh) omits remote sync so it does not specify to the receiver a UNIX domain socket for ptp4l. So $uds is currently an empty string. Signed-off-by:
-
Yang Yingliang authored
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by:
-
Wei Yongjun authored
SPI devices use the spi_device_id for module autoloading even on systems using device tree, after commit 5fa6863b ("spi: Check we have a spi_device_id for each DT compatible"), kernel warns as follows since the spi_device_id is missing: SPI driver mse102x has no spi_device_id for vertexcom,mse1021 SPI driver mse102x has no spi_device_id for vertexcom,mse1022 Add spi_device_id entries to silence the warnings, and ensure driver module autoloading works. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20220922065717.1448498-1-weiyongjun@huaweicloud.comSigned-off-by:
-
Wei Yongjun authored
In case of error, the function get_phy_device() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by:
-
Jakub Kicinski authored
Arun Ramadoss says: ==================== net: dsa: microchip: ksz9477: enable interrupt for internal phy link detection This patch series implements the common interrupt handling for ksz9477 based switches and lan937x. The ksz9477 and lan937x has similar interrupt registers except ksz9477 has 4 port based interrupts whereas lan937x has 6 interrupts. The patch moves the phy interrupt hanler implemented in lan937x_main.c to ksz_common.c, along with the mdio_register functionality. ==================== Link: https://lore.kernel.org/r/20220922071028.18012-1-arun.ramadoss@microchip.comSigned-off-by:
-
Arun Ramadoss authored
Config_intr and handle_interrupt are enabled for ksz9477 phy. It is similar to all other phys in the micrel phys. Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Arun Ramadoss authored
The global port interrupt routines and individual ports interrupt routines has similar implementation except the mask & status register and number of nested irqs in them. The mask & status register and pointer to ksz_device is added to ksz_irq and uses the ksz_irq as irq_chip_data. Signed-off-by:
-
Arun Ramadoss authored
To support the phy link detection through interrupt method for ksz9477 based switch, the interrupt handling routines are moved from lan937x_main.c to ksz_common.c. The only changes made are functions names are prefixed with ksz_ instead of lan937x_. Signed-off-by:
-
Arun Ramadoss authored
Currently, if the mdio node is not present in the dts file then lan937x_mdio_register return -ENODEV and entire probing process fails. To make the mdio_register generic for all ksz series switches and to maintain back-compatibility with existing dts file, return -ENODEV is replaced with return 0. Signed-off-by:
-
Arun Ramadoss authored
In the lan937x_mdio_register function, phy interrupts are enabled irrespective of irq is enabled in the switch. Now, the check is added to enable the phy interrupt only if the irq is enabled in the switch. Signed-off-by:
-
Arun Ramadoss authored
Currently the number of port irqs is hard coded for the lan937x switch as 6. In order to make the generic interrupt handler for ksz switches, number of port irq supported by the switch is added to the ksz_chip_data. It is 4 for ksz9477, 2 for ksz9897 and 3 for ksz9567. Signed-off-by:
-
Vladimir Oltean authored
taprio_dev_notifier() subscribes to netdev state changes in order to determine whether interfaces which have a taprio root qdisc have changed their link speed, so the internal calculations can be adapted properly. The 'qdev' temporary variable serves no purpose, because we just use it only once, and can just as well use qdisc_dev(q->root) directly (or the "dev" that comes from the netdev notifier; this is because qdev is only interesting if it was the subject of the state change, _and_ its root qdisc belongs in the taprio list). The 'found' variable also doesn't really serve too much of a purpose either; we can just call taprio_set_picos_per_byte() within the loop, and exit immediately afterwards. Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20220923145921.3038904-1-vladimir.oltean@nxp.comSigned-off-by:
-
Jakub Kicinski authored
Gaosheng Cui says: ==================== Remove useless inline functions from net ==================== Link: https://lore.kernel.org/r/20220922083857.1430811-1-cuigaosheng1@huawei.comSigned-off-by:
-
Gaosheng Cui authored
All uses of dst_hold_and_use() have been removed since commit 1202cdd6 ("Remove DECnet support from kernel"), so remove it. Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by:
-
Gaosheng Cui authored
All uses of sk_nulls_node_init() have been removed since commit dbca1596 ("ping: convert to RCU lookups, get rid of rwlock"), so remove it. Signed-off-by:
-
Gaosheng Cui authored
All uses of neigh_key_eq16() have been removed since commit 1202cdd6 ("Remove DECnet support from kernel"), so remove it. Signed-off-by:
-
Gaosheng Cui authored
Remove all the code about SFTR-V2 Register which have been deprecated since commit 77b7f83d ("mlxsw: Enable unified bridge model"). Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Vladimir Oltean authored
As pointed out during review, currently the following set of commands crashes the kernel: $ ip netns add ns0 $ ip link set swp0 netns ns0 $ ip netns del ns0 WARNING: CPU: 1 PID: 27 at net/core/dev.c:10884 unregister_netdevice_many+0xaa4/0xaec Workqueue: netns cleanup_net pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : unregister_netdevice_many+0xaa4/0xaec lr : unregister_netdevice_many+0x700/0xaec Call trace: unregister_netdevice_many+0xaa4/0xaec default_device_exit_batch+0x294/0x340 ops_exit_list+0xac/0xc4 cleanup_net+0x2e4/0x544 process_one_work+0x4ec/0xb40 ---[ end trace 0000000000000000 ]--- unregister_netdevice: waiting for swp0 to become free. Usage count = 2 This is because since DSA user ports, since they started populating dev->rtnl_link_ops in the blamed commit, gained a different treatment from default_device_exit_net(), which thinks these interfaces can now be unregistered. They can't; so set netns_refund = true to restore the behavior prior to populating dev->rtnl_link_ops. Fixes: 95f510d0 ("net: dsa: allow the DSA master to be seen and changed through rtnetlink") Suggested-by:
-
Jesper Dangaard Brouer authored
During LPC2022 I meetup with my page_pool co-maintainer Ilias. When discussing page_pool code we realised/remembered certain optimizations had not been fully utilised. Since commit c07aea3e ("mm: add a signature in struct page") struct page have a direct pointer to the page_pool object this page was allocated from. Thus, with this info it is possible to skip the rhashtable_lookup to find the page_pool object in __xdp_return(). The rcu_read_lock can be removed as it was tied to xdp_mem_allocator. The page_pool object is still safe to access as it tracks inflight pages and (potentially) schedules final release from a work queue. Created a micro benchmark of XDP redirecting from mlx5 into veth with XDP_DROP bpf-prog on the peer veth device. This increased performance 6.5% from approx 8.45Mpps to 9Mpps corresponding to using 7 nanosec (27 cycles at 3.8GHz) less per packet. Suggested-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by:
-
Anand Moon authored
Rockchip RV1126 has GMAC 10/100/1000M ethernet controller via RGMII and RMII interfaces are configured via M0 and M1 pinmux. This patch adds rv1126 support by adding delay lines of M0 and M1 simultaneously. Signed-off-by:
Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by:
David Wu <david.wu@rock-chips.com> Signed-off-by:
Anand Moon <anand@edgeble.ai> Signed-off-by:
Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20220920140944.2535-2-anand@edgeble.aiSigned-off-by:
-
Anand Moon authored
Add compatible string for RV1126 gmac, and constrain it to be compatible with Synopsys dwmac 4.20a. Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Peilin Ye authored
Similar to udp_read_skb(), delete the unnecessary while loop in unix_read_skb() for readability. Since recv_actor() cannot return a value greater than skb->len (see sk_psock_verdict_recv()), remove the redundant check. Suggested-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
Peilin Ye <peilin.ye@bytedance.com> Link: https://lore.kernel.org/r/7009141683ad6cd3785daced3e4a80ba0eb773b5.1663909008.git.peilin.ye@bytedance.comSigned-off-by:
-
Peilin Ye authored
Delete the unnecessary while loop in udp_read_skb() for readability. Additionally, since recv_actor() cannot return a value greater than skb->len (see sk_psock_verdict_recv()), remove the redundant check. Suggested-by:
-
Sabrina Dubroca authored
Commit 0a28bfd4 added a metadata_dst to each tx_sc, but that's only allocated when macsec_add_dev has run, which happens after device registration. If the requested or computed SCI already exists, or if linking to the lower device fails, we will panic because metadata_dst_free can't handle NULL. Reproducer: ip link add link $lower type macsec ip link add link $lower type macsec Fixes: 0a28bfd4 ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/60f2a1965fe553e2cade9472407d0fafff8de8ce.1663923580.git.sd@queasysnail.netSigned-off-by:
-
- 24 Sep, 2022 6 commits
-
-
Eric Dumazet authored
Blamed commit added a txhash parameter to tcp_v6_send_response() but forgot to update tcp_v6_send_reset() accordingly. Fixes: aa51b80e ("ipv6: tcp: send consistent autoflowlabel in SYN_RECV state") Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220922165036.1795862-1-eric.dumazet@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Alex Elder says: ==================== net: ipa: another set of cleanups This series contains another set of cleanups done in preparation for an upcoming series that reworks how IPA registers and their fields are defined. The first replaces the use of u32_replace_bits() with a simple logical AND operation in two places. The second creates a new function to encapsulate some common code, and renames another for consistency. The third restructures two other functions that do similar things to make their similarity more obvious. The fourth defines the flag bits in a register using an enumerated type. And the fifth updates "ipa_reg.h" so the values assigned to enumerated type members are aligned consistently. The last three encapsulate the code that assigns values to a few registers into separate functions. ==================== Link: https://lore.kernel.org/r/20220922222100.2543621-1-elder@linaro.orgSigned-off-by:
-
Alex Elder authored
Create a new function that encapsulates setting the BCR, TX_CFG, and CLKON_CFG register values during hardware configuration. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Create a new function that encapsulates setting the counter configuration register value for versions prior to IPA v4.5. Create another small function to represent configuring hardware timing regardless of version. Signed-off-by:
-
Alex Elder authored
Create a new function that encapsulates setting the register flag that disables filter and routing table hashing for IPA v4.2. Signed-off-by:
-
Alex Elder authored
Update a few enumerated type definitions in "ipa_reg.h" so that the values assigned to each member align on the same column. Where a "TX" or "RX" (or both) comment is present, move that annotation into a separate comment between the member name and its value. Signed-off-by:
-
