- 13 Sep, 2019 17 commits
-
-
Hari Bathini authored
Except for Reserved dump area (see Documentation/powerpc/firmware- assisted-dump.rst) which is permanent reserved, all memory above boot memory size, where boot memory size is the memory required for the kernel to boot successfully when booted with restricted memory (memory for capture kernel), is released when the dump is invalidated. Make this a bit more explicit in the code. Signed-off-by:
Hari Bathini <hbathini@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821336092.5656.1079046285366041687.stgit@hbathini.in.ibm.com
-
Hari Bathini authored
Improve how fadump_region contents are displayed by adding source information of memory regions that are to be dumped by f/w. Signed-off-by:
-
Hari Bathini authored
Move platform specific register/un-register code, the RTAS calls, to register/un-register callback functions. This would also mean moving code that initializes and prints the platform specific FADump data. Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Hari Bathini authored
Introduce callback functions for platform specific operations like register, unregister, invalidate & such. Also, define place-holders for the same on pSeries platform. Signed-off-by:
-
Hari Bathini authored
Currently, FADump is only supported on pSeries but that is going to change soon with FADump support being added on PowerNV platform. So, move rtas specific definitions to platform code to allow FADump to have multiple platforms support. Signed-off-by:
-
Hari Bathini authored
Use helper functions to simplify memory allocation, pinning down and freeing the memory used for CPU notes buffer. Signed-off-by:
-
Hari Bathini authored
The figures depicting FADump's (Firmware-Assisted Dump) memory layout are missing some finer details like different memory regions and what they represent. Improve the documentation by updating those details. Signed-off-by:
-
Hari Bathini authored
Declare helper functions, that can be reused by multiple platforms, in the internal header file. Signed-off-by:
-
Hari Bathini authored
Add helper functions to setup & free CPU notes buffer and to find if a given memory area is contiguous. Also, use boolean as return type for the function that finds if boot memory area is contiguous. While at it, save the virtual address of CPU notes buffer instead of physical address as virtual address is used often. Signed-off-by:
-
Hari Bathini authored
Though asm/fadump.h is meant to be used by other components dealing with FADump, it also has macros/definitions internal to FADump code. Move them to a new header file used within FADump code. This also makes way for refactoring platform specific FADump code. Signed-off-by:
-
Masahiro Yamada authored
This slightly improves the prom_init_check rule. [1] Avoid needless check Currently, prom_init_check.sh is invoked every time you run 'make' even if you have changed nothing in prom_init.c. With this commit, the script is re-run only when prom_init.o is recompiled. [2] Beautify the build log Currently, the O= build shows the absolute path to the script: CALL /abs/path/to/source/of/linux/arch/powerpc/kernel/prom_init_check.sh With this commit, it is always a relative path to the timestamp file: PROMCHK arch/powerpc/kernel/prom_init_check Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Michael Ellerman authored
Some of the templates used for KVM patching are only used on certain platforms, but currently they are always built-in, fix that. Signed-off-by:
-
Michael Ellerman authored
All the code in kvm.c can be marked __init. Most of it is already inlined into the initcall, but not all. So instead of relying on the inlining, mark it all as __init. This saves ~280 bytes of text for my configuration. Signed-off-by:
-
Michael Ellerman authored
kvm_tmp is now in .text and so doesn't need a special overlap check. Signed-off-by:
-
Michael Ellerman authored
In some configurations of KVM, guests binary patch themselves to avoid/reduce trapping into the hypervisor. For some instructions this requires replacing one instruction with a sequence of instructions. For those cases we need to write the sequence of instructions somewhere and then patch the location of the original instruction to branch to the sequence. That requires that the location of the sequence be within 32MB of the original instruction. The current solution for this is that we create a 1MB array in BSS, write sequences into there, and then free the remainder of the array. This has a few problems: - it confuses kmemleak. - it confuses lockdep. - it requires mapping kvm_tmp executable, which can cause adjacent areas to also be mapped executable if we're using 16M pages for the linear mapping. - the 32MB limit can be exceeded if the kernel is big enough, especially with STRICT_KERNEL_RWX enabled, which then prevents the patching from working at all. We can fix all those problems by making kvm_tmp just a region of regular .text. However currently it's 1MB in size, and we don't want to waste 1MB of text. In practice however I only see ~30KB of kvm_tmp being used even for an allyes_config. So shrink kvm_tmp to 64K, which ought to be enough for everyone, and move it into .text. Signed-off-by:
-
Michael Ellerman authored
The builds breaks when IOMMU_API=n, eg. skiroot_defconfig: arch/powerpc/platforms/powernv/npu-dma.c:96:28: error: 'get_gpu_pci_dev_and_pe' defined but not used arch/powerpc/platforms/powernv/npu-dma.c:126:13: error: 'pnv_npu_set_window' defined but not used Fixes: b4d37a7b ("powerpc/powernv: Remove unused pnv_npu_try_dma_set_bypass() function") Signed-off-by:
-
Michael Ellerman authored
The build breaks when STACKTRACE=n, eg. skiroot_defconfig: arch/powerpc/kernel/eeh_event.c:124:23: error: implicit declaration of function 'stack_trace_save' Fix it with some ifdefs for now. Fixes: 25baf3d8 ("powerpc/eeh: Defer printing stack trace") Signed-off-by:
-
- 11 Sep, 2019 9 commits
-
-
Greg Kurz authored
There's a bug in skiboot that causes the OPAL_XIVE_ALLOCATE_IRQ call to return the 32-bit value 0xffffffff when OPAL has run out of IRQs. Unfortunatelty, OPAL return values are signed 64-bit entities and errors are supposed to be negative. If that happens, the linux code confusingly treats 0xffffffff as a valid IRQ number and panics at some point. A fix was recently merged in skiboot: e97391ae2bb5 ("xive: fix return value of opal_xive_allocate_irq()") but we need a workaround anyway to support older skiboots already in the field. Internally convert 0xffffffff to OPAL_RESOURCE which is the usual error returned upon resource exhaustion. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:Greg Kurz <groug@kaod.org> Reviewed-by:
Cédric Le Goater <clg@kaod.org> Signed-off-by:
-
Nathan Lynch authored
prep_irq_for_idle() is intended to be called before entering H_CEDE (and it is used by the pseries cpuidle driver). However the default pseries idle routine does not call it, leading to mismanaged lazy irq state when the cpuidle driver isn't in use. Manifestations of this include: * Dropped IPIs in the time immediately after a cpu comes online (before it has installed the cpuidle handler), making the online operation block indefinitely waiting for the new cpu to respond. * Hitting this WARN_ON in arch_local_irq_restore(): /* * We should already be hard disabled here. We had bugs * where that wasn't the case so let's dbl check it and * warn if we are wrong. Only do that when IRQ tracing * is enabled as mfmsr() can be costly. */ if (WARN_ON_ONCE(mfmsr() & MSR_EE)) __hard_irq_disable(); Call prep_irq_for_idle() from pseries_lpar_idle() and honor its result. Fixes: 363edbe2 ("powerpc: Default arch idle could cede processor on pseries") Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
-
Ravi Bangoria authored
If watchpoint exception is generated by larx/stcx instructions, the reservation created by larx gets lost while handling exception, and thus stcx instruction always fails. Generally these instructions are used in a while(1) loop, for example spinlocks. And because stcx never succeeds, it loops forever and ultimately hangs the system. Note that ptrace anyway works in one-shot mode and thus for ptrace we don't change the behaviour. It's up to ptrace user to take care of this. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Vasant Hegde authored
We have OPAL_MSG_PRD message type to pass prd related messages from OPAL to `opal-prd`. It can handle messages upto 64 bytes. We have a requirement to send bigger than 64 bytes of data from OPAL to `opal-prd`. Lets add new message type (OPAL_MSG_PRD2) to pass bigger data. Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Make the error string clear that it's the PRD2 event that failed] Signed-off-by:
-
Vasant Hegde authored
Use "opal-msg-size" device tree property to allocate memory for "opal_msg". Signed-off-by:
-
Christoph Hellwig authored
Neither pnv_npu_try_dma_set_bypass() nor the pnv_npu_dma_set_32() and pnv_npu_dma_set_bypass() helpers called by it are used anywhere in the kernel tree, so remove them. mpe: They're unused since 2d6ad41b ("powerpc/powernv: use the generic iommu bypass code") removed the last usage. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Santosh Sivaraj authored
Appropriate self tests for memcpy_mcsafe Suggested-by:
Santosh Sivaraj <santosh@fossix.org> Signed-off-by:
-
Santosh Sivaraj authored
For sizes lesser than 128 bytes, the code branches out early without saving the stack frame, which when restored later drops frame of the caller. Tested-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Segher Boessenkool authored
The setjmp function should be declared as "returns_twice", or bad things can happen[1]. This does not actually change generated code in my testing. The longjmp function should be declared as "noreturn", so that the compiler can optimise calls to it better. This makes the generated code a little shorter. 1: https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-returns_005ftwice-function-attributeSigned-off-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
-
- 05 Sep, 2019 14 commits
-
-
Jordan Niethe authored
Commit 2874c5fd ("treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152") left an empty comment in machdep.h, as the boilerplate was the only text in the comment. Remove the empty comment. Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Signed-off-by:
-
Madhavan Srinivasan authored
Commit <684d9840> ('powerpc/powernv: Add debugfs interface for imc-mode and imc') added debugfs interface for the nest imc pmu devices to support changing of different ucode modes. Primarily adding this capability for debug. But when doing so, the code did not consider the case of cpu-less nodes. So when reading the _cmd_ or _mode_ file of a cpu-less node will create this crash. Faulting instruction address: 0xc0000000000d0d58 Oops: Kernel access of bad area, sig: 11 [#1] ... CPU: 67 PID: 5301 Comm: cat Not tainted 5.2.0-rc6-next-20190627+ #19 NIP: c0000000000d0d58 LR: c00000000049aa18 CTR:c0000000000d0d50 REGS: c00020194548f9e0 TRAP: 0300 Not tainted (5.2.0-rc6-next-20190627+) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR:28022822 XER: 00000000 CFAR: c00000000049aa14 DAR: 000000000003fc08 DSISR:40000000 IRQMASK: 0 ... NIP imc_mem_get+0x8/0x20 LR simple_attr_read+0x118/0x170 Call Trace: simple_attr_read+0x70/0x170 (unreliable) debugfs_attr_read+0x6c/0xb0 __vfs_read+0x3c/0x70 vfs_read+0xbc/0x1a0 ksys_read+0x7c/0x140 system_call+0x5c/0x70 Patch fixes the issue with a more robust check for vbase to NULL. Before patch, ls output for the debugfs imc directory # ls /sys/kernel/debug/powerpc/imc/ imc_cmd_0 imc_cmd_251 imc_cmd_253 imc_cmd_255 imc_mode_0 imc_mode_251 imc_mode_253 imc_mode_255 imc_cmd_250 imc_cmd_252 imc_cmd_254 imc_cmd_8 imc_mode_250 imc_mode_252 imc_mode_254 imc_mode_8 After patch, ls output for the debugfs imc directory # ls /sys/kernel/debug/powerpc/imc/ imc_cmd_0 imc_cmd_8 imc_mode_0 imc_mode_8 Actual bug here is that, we have two loops with potentially different loop counts. That is, in imc_get_mem_addr_nest(), loop count is obtained from the dt entries. But in case of export_imc_mode_and_cmd(), loop was based on for_each_nid() count. Patch fixes the loop count in latter based on the struct mem_info. Ideally it would be better to have array size in struct imc_pmu. Fixes: 684d9840 ('powerpc/powernv: Add debugfs interface for imc-mode and imc') Reported-by:
Qian Cai <cai@lca.pw> Suggested-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
Introduce two options to control the use of the tlbie instruction. A boot time option which completely disables the kernel using the instruction, this is currently incompatible with HASH MMU, KVM, and coherent accelerators. And a debugfs option can be switched at runtime and avoids using tlbie for invalidating CPU TLBs for normal process and kernel address mappings. Coherent accelerators are still managed with tlbie, as will KVM partition scope translations. Cross-CPU TLB flushing is implemented with IPIs and tlbiel. This is a basic implementation which does not attempt to make any optimisation beyond the tlbie implementation. This is useful for performance testing among other things. For example in certain situations on large systems, using IPIs may be faster than tlbie as they can be directed rather than broadcast. Later we may also take advantage of the IPIs to do more interesting things such as trim the mm cpumask more aggressively. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
The various translation structure invalidations performed in early boot when the MMU is off are not required, because everything is invalidated immediately before a CPU first enables its MMU (see early_init_mmu and early_init_mmu_secondary). Signed-off-by:
-
Nicholas Piggin authored
Radix guests are responsible for managing their own translation caches, so make them match bare metal radix and hash, and make each CPU flush all its translations right before enabling its MMU. Radix guests may not flush partition scope translations, so in tlbiel_all, make these flushes conditional on CPU_FTR_HVMODE. Process scope translations are the only type visible to the guest. Signed-off-by:
-
Nicholas Piggin authored
No functional change. Signed-off-by:
-
Nicholas Piggin authored
There should be no functional changes. - Use calls to existing radix_tlb.c functions in flush_partition. - Rename radix__flush_tlb_lpid to radix__flush_all_lpid and similar, because they flush everything, matching flush_all_mm rather than flush_tlb_mm for the lpid. - Remove some unused radix_tlb.c flush primitives. Signed-off: Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
This callback is only required because the partition table init comes before process table allocation on powernv (aka bare metal aka native). Change the order to allocate the process table first, and remove the callback. Signed-off-by:
-
Oliver O'Halloran authored
Use the new eeh_dev_check and eeh_dev_break interfaces to test EEH recovery. Historically this has been done manually using platform specific EEH error injection facilities (e.g. via RTAS). However, documentation on how to use these facilities is haphazard at best and non-existent at worst so it's hard to develop a cross-platform test. The new debugfs interfaces allow the kernel to handle the platform specific details so we can write a more generic set of sets. This patch adds the most basic of recovery tests where: a) Errors are injected and recovered from sequentially, b) Errors are not injected into PCI-PCI bridges, such as PCIe switches. c) Errors are only injected into device function zero. d) No errors are injected into Virtual Functions. a), b) and c) are largely due to limitations of Linux's EEH support. EEH recovery is serialised in the EEH recovery thread which forces a). Similarly, multi-function PCI devices are almost always grouped into the same PE so injecting an error on one function exercises the same code paths. c) is because we currently more or less ignore PCI bridges during recovery and assume that the recovered topology will be the same as the original. d) is due to the limits of the eeh_dev_break interface. With the current implementation we can't inject an error into a specific VF without potentially causing additional errors on other VFs. Due to the serialised recovery process we might end up timing out waiting for another function to recover before the function of interest is recovered. The platform specific error injection facilities are finer-grained and allow this capability, but doing that requires working out how to use those facilities first. Basicly, it's better than nothing and it's a base to build on. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Oliver O'Halloran authored
Add an interface to debugfs for generating an EEH event on a given device. This works by disabling memory accesses to and from the device by setting the PCI_COMMAND register (or the VF Memory Space Enable on the parent PF). This is a somewhat portable alternative to using the platform specific error injection mechanisms since those tend to be either hard to use, or straight up broken. For pseries the interfaces also requires the use of /dev/mem which is probably going to go away in a post-LOCKDOWN world (and it's a horrific hack to begin with) so moving to a kernel-provided interface makes sense and provides a sane, cross-platform interface for userspace so we can write more generic testing scripts. Signed-off-by:
-
Oliver O'Halloran authored
Detecting an frozen EEH PE usually occurs when an MMIO load returns a 0xFFs response. When performing EEH testing using the EEH error injection feature available on some platforms there is no simple way to kick-off the kernel's recovery process since any accesses from userspace (usually /dev/mem) will bypass the MMIO helpers in the kernel which check if a 0xFF response is due to an EEH freeze or not. If a device contains a 0xFF byte in it's config space it's possible to trigger the recovery process via config space read from userspace, but this is not a reliable method. If a driver is bound to the device an in use it will frequently trigger the MMIO check, but this is also inconsistent. To solve these problems this patch adds a debugfs file called "eeh_dev_check" which accepts a <domain>:<bus>:<dev>.<fn> string and runs eeh_dev_check_failure() on it. This is the same check that's done when the kernel gets a 0xFF result from an config or MMIO read with the added benifit that it can be reliably triggered from userspace. Signed-off-by:
-
Oliver O'Halloran authored
I am the RAS team. Hear me roar. Roar. On a more serious note, being able to locate failed devices can be helpful. Set the attention indicator if the slot supports it once we've determined the device is present and only clear it if the device is fully recovered. Signed-off-by:
-
Oliver O'Halloran authored
pnv_php is generally used with PCIe bridges which provide a native interface for setting the attention and power indicator LEDs. Wire up those interfaces even if firmware does not have support for them (yet...) Signed-off-by:
-
Oliver O'Halloran authored
Currently we check that an IODA2 compatible PHB is upstream of this slot. This is mainly to avoid pnv_php creating slots for the various "virtual PHBs" that we create for NVLink. There's no real need for this restriction so allow it on IODA3. Signed-off-by:
-
