- 27 Mar, 2020 1 commit
-
-
Marek Vasut authored
This patch reverts 58292104 ("net: ks8851-ml: Fix 16-bit IO operation") and edacb098 ("net: ks8851-ml: Fix 16-bit data access"), because it turns out these were only necessary due to buggy hardware. This patch adds a check for such a buggy hardware to prevent any such mistakes again. While working further on the KS8851 driver, it came to light that the KS8851-16MLL is capable of switching bus endianness by a hardware strap, EESK pin. If this strap is incorrect, the IO accesses require such endian swapping as is being reverted by this patch. Such swapping also impacts the performance significantly. Hence, in addition to removing it, detect that the hardware is broken, report to user, and fail to bind with such hardware. Fixes: 58292104 ("net: ks8851-ml: Fix 16-bit IO operation") Fixes: edacb098 ("net: ks8851-ml: Fix 16-bit data access") Signed-off-by:
Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 26 Mar, 2020 8 commits
-
-
David S. Miller authored
Merge tag 'mac80211-for-net-2020-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have the following fixes: * drop data packets if there's no key for them anymore, after there had been one, to avoid sending them in clear when hostapd removes the key before it removes the station and the packets are still queued * check port authorization again after dequeue, to avoid sending packets if the station is no longer authorized * actually remove the authorization flag before the key so packets are also dropped properly because of this * fix nl80211 control port packet tagging to handle them as packets allowed to go out without encryption * fix NL80211_ATTR_CHANNEL_WIDTH outgoing netlink attribute width (should be 32 bits, not 8) * don't WARN in a CSA scenario that happens on some APs * fix HE spatial reuse element size calculation ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
list_for_each_entry_from_reverse() iterates backwards over the list from the current position, but in the error path we should start from the previous position. Fix this by using list_for_each_entry_continue_reverse() instead. This suppresses the following error from coccinelle: drivers/net/ethernet/mellanox/mlxsw//spectrum_mr.c:655:34-38: ERROR: invalid reference to the index variable of the iterator on line 636 Fixes: c011ec1b ("mlxsw: spectrum: Add the multicast routing offloading logic") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xu Wang authored
In qlcnic_83xx_get_reset_instruction_template, the variable of null test is bad, so correct it. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
When a frame is transmitted via the nl80211 TX rather than as a normal frame, IEEE80211_TX_CTRL_PORT_CTRL_PROTO wasn't set and this will lead to wrong decisions (rate control etc.) being made about the frame; fix this. Fixes: 91180649 ("mac80211: Add support for tx_control_port") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200326155333.f183f52b02f0.I4054e2a8c11c2ddcb795a0103c87be3538690243@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
If a station is still marked as authorized, mark it as no longer so before removing its keys. This allows frames transmitted to it to be rejected, providing additional protection against leaking plain text data during the disconnection flow. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200326155133.ccb4fb0bb356.If48f0f0504efdcf16b8921f48c6d3bb2cb763c99@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Jouni Malinen authored
mac80211 used to check port authorization in the Data frame enqueue case when going through start_xmit(). However, that authorization status may change while the frame is waiting in a queue. Add a similar check in the dequeue case to avoid sending previously accepted frames after authorization change. This provides additional protection against potential leaking of frames after a station has been disconnected and the keys for it are being removed. Cc: stable@vger.kernel.org Signed-off-by:
Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200326155133.ced84317ea29.I34d4c47cd8cc8a4042b38a76f16a601fbcbfd9b3@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Ilan Peer authored
When cfg80211_update_assoc_bss_entry() is called, there is a verification that the BSS channel actually changed. As some APs use CSA also for bandwidth changes, this would result with a kernel warning. Fix this by removing the WARN_ON(). Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.96316ada0e8d.I6710376b1b4257e5f4712fc7ab16e2b638d512aa@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
If we know that we have an encrypted link (based on having had a key configured for TX in the past) then drop all data frames in the key selection handler if there's no key anymore. This fixes an issue with mac80211 internal TXQs - there we can buffer frames for an encrypted link, but then if the key is no longer there when they're dequeued, the frames are sent without encryption. This happens if a station is disconnected while the frames are still on the TXQ. Detecting that a link should be encrypted based on a first key having been configured for TX is fine as there are no use cases for a connection going from with encryption to no encryption. With extended key IDs, however, there is a case of having a key configured for only decryption, so we can't just trigger this behaviour on a key being configured. Cc: stable@vger.kernel.org Reported-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.6865c7f28a14.I9fb1d911b064262d33e33dfba730cdeef83926ca@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 25 Mar, 2020 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix deadlock in bpf_send_signal() from Yonghong Song. 2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan. 3) Add missing locking in iwlwifi mvm code, from Avraham Stern. 4) Fix MSG_WAITALL handling in rxrpc, from David Howells. 5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong Wang. 6) Fix producer race condition in AF_PACKET, from Willem de Bruijn. 7) cls_route removes the wrong filter during change operations, from Cong Wang. 8) Reject unrecognized request flags in ethtool netlink code, from Michal Kubecek. 9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from Doug Berger. 10) Don't leak ct zone template in act_ct during replace, from Paul Blakey. 11) Fix flushing of offloaded netfilter flowtable flows, also from Paul Blakey. 12) Fix throughput drop during tx backpressure in cxgb4, from Rahul Lakkireddy. 13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric Dumazet. 14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well, also from Eric Dumazet. 15) Restrict macsec to ethernet devices, from Willem de Bruijn. 16) Fix reference leak in some ethtool *_SET handlers, from Michal Kubecek. 17) Fix accidental disabling of MSI for some r8169 chips, from Heiner Kallweit. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits) net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build net: ena: Add PCI shutdown handler to allow safe kexec selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED selftests/net: add missing tests to Makefile r8169: re-enable MSI on RTL8168c net: phy: mdio-bcm-unimac: Fix clock handling cxgb4/ptp: pass the sign of offset delta in FW CMD net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop net: cbs: Fix software cbs to consider packet sending time net/mlx5e: Do not recover from a non-fatal syndrome net/mlx5e: Fix ICOSQ recovery flow with Striding RQ net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset net/mlx5e: Enhance ICOSQ WQE info fields net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure selftests: netfilter: add nfqueue test case netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress netfilter: nft_fwd_netdev: validate family and chain type netfilter: nft_set_rbtree: Detect partial overlaps on insertion netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start() netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: - One core quirk by myself to fix the .irq_disable() semantics when the gpiolib core takes over this callback. - The rest is an elaborate series of four patches fixing Intel laptop ACPI wakeup quirks. * tag 'gpio-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 model gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 BYT + AXP288 model gpiolib: acpi: Rework honor_wakeup option into an ignore_wake option gpiolib: acpi: Correct comment for HP x2 10 honor_wakeup quirk gpiolib: Fix irq_disable() semantics
-
David S. Miller authored
Merge tag 'wireless-drivers-2020-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.6 Fourth, and last, set of fixes for v5.6. Just two important fixes to iwlwifi regressions. iwlwifi * fix GEO_TX_POWER_LIMIT command on certain devices which caused firmware to crash during initialisation * add back device ids for three devices which were accidentally removed ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
net/netfilter/nft_fwd_netdev.c: In function ‘nft_fwd_netdev_eval’: net/netfilter/nft_fwd_netdev.c:32:10: error: ‘struct sk_buff’ has no member named ‘tc_redirected’ pkt->skb->tc_redirected = 1; ^~ net/netfilter/nft_fwd_netdev.c:33:10: error: ‘struct sk_buff’ has no member named ‘tc_from_ingress’ pkt->skb->tc_from_ingress = 1; ^~ To avoid a direct dependency with tc actions from netfilter, wrap the redirect bits around CONFIG_NET_REDIRECT and move helpers to include/linux/skbuff.h. Turn on this toggle from the ifb driver, the only existing client of these bits in the tree. This patch adds skb_set_redirected() that sets on the redirected bit on the skbuff, it specifies if the packet was redirect from ingress and resets the timestamp (timestamp reset was originally missing in the netfilter bugfix). Fixes: bcfabee1 ("netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress") Reported-by: noreply@ellerman.id.au Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guilherme G. Piccoli authored
Currently ENA only provides the PCI remove() handler, used during rmmod for example. This is not called on shutdown/kexec path; we are potentially creating a failure scenario on kexec: (a) Kexec is triggered, no shutdown() / remove() handler is called for ENA; instead pci_device_shutdown() clears the master bit of the PCI device, stopping all DMA transactions; (b) Kexec reboot happens and the device gets enabled again, likely having its FW with that DMA transaction buffered; then it may trigger the (now invalid) memory operation in the new kernel, corrupting kernel memory area. This patch aims to prevent this, by implementing a shutdown() handler quite similar to the remove() one - the difference being the handling of the netdev, which is unregistered on remove(), but following the convention observed in other drivers, it's only detached on shutdown(). This prevents an odd issue in AWS Nitro instances, in which after the 2nd kexec the next one will fail with an initrd corruption, caused by a wild DMA write to invalid kernel memory. The lspci output for the adapter present in my instance is: 00:05.0 Ethernet controller [0200]: Amazon.com, Inc. Elastic Network Adapter (ENA) [1d0f:ec20] Suggested-by:
Gavin Shan <gshan@redhat.com> Signed-off-by:
Guilherme G. Piccoli <gpiccoli@canonical.com> Acked-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
The lib files should not be defined as TEST_PROGS, or we will run them in run_kselftest.sh. Also remove ethtool_lib.sh exec permission. Fixes: 81573b18 ("selftests/net/forwarding: add Makefile to install tests") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
Find some tests are missed in Makefile by running: for file in $(ls *.sh); do grep -q $file Makefile || echo $file; done Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull zonefs fix from Damien Le Moal: "A single fix from me to correctly handle the size of read-only zone files" * tag 'zonefs-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonfs: Fix handling of read-only zones
-
Johannes Berg authored
The he_sr_control field is just a u8, so le32_to_cpu() shouldn't be applied to it; this was evidently copied from ieee80211_he_oper_size(). Fix it, and also adjust the type of the local variable. Fixes: ef11a931 ("mac80211: HE: add Spatial Reuse element parsing support") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200325090918.dfe483b49e06.Ia53622f23b2610a2ae6ea39a199866196fe946c1@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
The new opmode notification used this attribute with a u8, when it's documented as a u32 and indeed used in userspace as such, it just happens to work on little-endian systems since userspace isn't doing any strict size validation, and the u8 goes into the lower byte. Fix this. Cc: stable@vger.kernel.org Fixes: 466b9936 ("cfg80211: Add support to notify station's opmode change to userspace") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200325090531.be124f0a11c7.Iedbf4e197a85471ebd729b186d5365c0343bf7a8@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Damien Le Moal authored
The write pointer of zones in the read-only consition is defined as invalid by the SCSI ZBC and ATA ZAC specifications. It is thus not possible to determine the correct size of a read-only zone file on mount. Fix this by handling read-only zones in the same manner as offline zones by disabling all accesses to the zone (read and write) and initializing the inode size of the read-only zone to 0). For zones found to be in the read-only condition at runtime, only disable write access to the zone and keep the size of the zone file to its last updated value to allow the user to recover previously written data. Also fix zonefs documentation file to reflect this change. Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) A new selftest for nf_queue, from Florian Westphal. This test covers two recent fixes: 07f8e4d0 ("tcp: also NULL skb->dev when copy was needed") and b738a185 ("tcp: ensure skb->dev is NULL before leaving TCP stack"). 2) The fwd action breaks with ifb. For safety in next extensions, make sure the fwd action only runs from ingress until it is extended to be used from a different hook. 3) The pipapo set type now reports EEXIST in case of subrange overlaps. Update the rbtree set to validate range overlaps, so far this validation is only done only from userspace. From Stefano Brivio. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-03-24 This series introduces some fixes to mlx5 driver. From Aya, Fixes to the RX error recovery flows From Leon, Fix IB capability mask Please pull and let me know if there is any problem. For -stable v5.5 ('net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure') For -stable v5.4 ('net/mlx5e: Fix ICOSQ recovery flow with Striding RQ') ('net/mlx5e: Do not recover from a non-fatal syndrome') ('net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset') ('net/mlx5e: Enhance ICOSQ WQE info fields') The above patch ('net/mlx5e: Enhance ICOSQ WQE info fields') will fail to apply cleanly on v5.4 due to a trivial contextual conflict, but it is an important fix, do I need to do something about it or just assume Greg will know how to handle this ? ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
The original change fixed an issue on RTL8168b by mimicking the vendor driver behavior to disable MSI on chip versions before RTL8168d. This however now caused an issue on a system with RTL8168c, see [0]. Therefore leave MSI disabled on RTL8168b, but re-enable it on RTL8168c. [0] https://bugzilla.redhat.com/show_bug.cgi?id=1792839 Fixes: 003bd5b4 ("r8169: don't use MSI before RTL8168d") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 24 Mar, 2020 17 commits
-
-
Andre Przywara authored
The DT binding for this PHY describes an *optional* clock property. Due to a bug in the error handling logic, we are actually ignoring this clock *all* of the time so far. Fix this by using devm_clk_get_optional() to handle this clock properly. Fixes: b78ac6ec ("net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider") Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Raju Rangoju authored
cxgb4_ptp_fineadjtime() doesn't pass the signedness of offset delta in FW_PTP_CMD. Fix it by passing correct sign. Signed-off-by:
Raju Rangoju <rajur@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Not only did this wheel did not need reinventing, but there is also an issue with it: It doesn't remove the VLAN header in a way that preserves the L2 payload checksum when that is being provided by the DSA master hw. It should recalculate checksum both for the push, before removing the header, and for the pull afterwards. But the current implementation is quite dizzying, with pulls followed immediately afterwards by pushes, the memmove is done before the push, etc. This makes a DSA master with RX checksumming offload to print stack traces with the infamous 'hw csum failure' message. So remove the dsa_8021q_remove_header function and replace it with something that actually works with inet checksumming. Fixes: d4619336 ("net: dsa: tag_8021q: Create helper function for removing VLAN header") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zh-yuan Ye authored
Currently the software CBS does not consider the packet sending time when depleting the credits. It caused the throughput to be Idleslope[kbps] * (Port transmit rate[kbps] / |Sendslope[kbps]|) where Idleslope * (Port transmit rate / (Idleslope + |Sendslope|)) = Idleslope is expected. In order to fix the issue above, this patch takes the time when the packet sending completes into account by moving the anchor time variable "last" ahead to the send completion time upon transmission and adding wait when the next dequeue request comes before the send completion time of the previous packet. changelog: V2->V3: - remove unnecessary whitespace cleanup - add the checks if port_rate is 0 before division V1->V2: - combine variable "send_completed" into "last" - add the comment for estimate of the packet sending Fixes: 585d763a ("net/sched: Introduce Credit Based Shaper (CBS) qdisc") Signed-off-by:
Zh-yuan Ye <ye.zh-yuan@socionext.com> Reviewed-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Aya Levin authored
For non-fatal syndromes like LOCAL_LENGTH_ERR, recovery shouldn't be triggered. In these scenarios, the RQ is not actually in ERR state. This misleads the recovery flow which assumes that the RQ is really in error state and no more completions arrive, causing crashes on bad page state. Fixes: 8276ea13 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Aya Levin authored
In striding RQ mode, the buffers of an RX WQE are first prepared and posted to the HW using a UMR WQEs via the ICOSQ. We maintain the state of these in-progress WQEs in the RQ SW struct. In the flow of ICOSQ recovery, the corresponding RQ is not in error state, hence: - The buffers of the in-progress WQEs must be released and the RQ metadata should reflect it. - Existing RX WQEs in the RQ should not be affected. For this, wrap the dealloc of the in-progress WQEs in a function, and use it in the ICOSQ recovery flow instead of mlx5e_free_rx_descs(). Fixes: be5323c8 ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Aya Levin authored
When resetting the RQ (moving RQ state from RST to RDY), the driver resets the WQ's SW metadata. In striding RQ mode, we maintain a field that reflects the actual expected WQ head (including in progress WQEs posted to the ICOSQ). It was mistakenly not reset together with the WQ. Fix this here. Fixes: 8276ea13 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Aya Levin authored
Add number of WQEBBs (WQE's Basic Block) to WQE info struct. Set the number of WQEBBs on WQE post, and increment the consumer counter (cc) on completion. In case of error completions, the cc was mistakenly not incremented, keeping a gap between cc and pc (producer counter). This failed the recovery flow on the ICOSQ from a CQE error which timed-out waiting for the cc and pc to meet. Fixes: be5323c8 ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Leon Romanovsky authored
The cap_mask1 isn't protected by field_select and not listed among RW fields, but it is required to be written to properly initialize ports in IB virtualization mode. Link: https://lore.kernel.org/linux-rdma/88bab94d2fd72f3145835b4518bc63dda587add6.camel@redhat.com Fixes: ab118da4 ("net/mlx5: Don't write read-only fields in MODIFY_HCA_VPORT_CONTEXT command") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Florian Westphal authored
Add a test case to check nf queue infrastructure. Could be extended in the future to also cover serialization of conntrack, uid and secctx attributes in nfqueue. For now, this checks that 'queue bypass' works, that a queue rule with no bypass option blocks traffic and that userspace receives the expected number of packets. For this we add two queues and hook all of prerouting/input/forward/output/postrouting. Packets get queued twice with a dummy base chain in between: This passes with current nf tree, but reverting commit 946c0d8e ("netfilter: nf_queue: fix reinject verdict handling") makes this trip (it processes 30 instead of expected 20 packets). v2: update config file with queue and other options missing/needed for other tests. v3: also test with tcp, this reveals problem with commit 28f8bfd1 ("netfilter: Support iif matches in POSTROUTING"), due to skb->dev pointing at another skb in the retransmit rbtree (skb->dev aliases to rbnode child). Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Set skb->tc_redirected to 1, otherwise the ifb driver drops the packet. Set skb->tc_from_ingress to 1 to reinject the packet back to the ingress path after leaving the ifb egress path. This patch inconditionally sets on these two skb fields that are meaningful to the ifb driver. The existing forward action is guaranteed to run from ingress path. Fixes: 39e6dea2 ("netfilter: nf_tables: add forward expression to the netdev family") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Make sure the forward action is only used from ingress. Fixes: 39e6dea2 ("netfilter: nf_tables: add forward expression to the netdev family") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Stefano Brivio authored
...and return -ENOTEMPTY to the front-end in this case, instead of proceeding. Currently, nft takes care of checking for these cases and not sending them to the kernel, but if we drop the set_overlap() call in nft we can end up in situations like: # nft add table t # nft add set t s '{ type inet_service ; flags interval ; }' # nft add element t s '{ 1 - 5 }' # nft add element t s '{ 6 - 10 }' # nft add element t s '{ 4 - 7 }' # nft list set t s table ip t { set s { type inet_service flags interval elements = { 1-3, 4-5, 6-7 } } } This change has the primary purpose of making the behaviour consistent with nft_set_pipapo, but is also functional to avoid inconsistent behaviour if userspace sends overlapping elements for any reason. v2: When we meet the same key data in the tree, as start element while inserting an end element, or as end element while inserting a start element, actually check that the existing element is active, before resetting the overlap flag (Pablo Neira Ayuso) Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Stefano Brivio authored
Replace negations of nft_rbtree_interval_end() with a new helper, nft_rbtree_interval_start(), wherever this helps to visualise the problem at hand, that is, for all the occurrences except for the comparison against given flags in __nft_rbtree_get(). This gets especially useful in the next patch. Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Stefano Brivio authored
...and return -ENOTEMPTY to the front-end on collision, -EEXIST if an identical element already exists. Together with the previous patch, element collision will now be returned to the user as -EEXIST. Reported-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Currently, the -EEXIST return code of ->insert() callbacks is ambiguous: it might indicate that a given element (including intervals) already exists as such, or that the new element would clash with existing ones. If identical elements already exist, the front-end is ignoring this without returning error, in case NLM_F_EXCL is not set. However, if the new element can't be inserted due an overlap, we should report this to the user. To this purpose, allow set back-ends to return -ENOTEMPTY on collision with existing elements, translate that to -EEXIST, and return that to userspace, no matter if NLM_F_EXCL was set. Reported-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling fixes from Ingo Molnar: "A handful of tooling fixes all across the map, no kernel changes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools headers uapi: Update linux/in.h copy perf probe: Do not depend on dwfl_module_addrsym() perf probe: Fix to delete multiple probe event perf parse-events: Fix reading of invalid memory in event parsing perf python: Fix clang detection when using CC=clang-version perf map: Fix off by one in strncpy() size argument tools: Let O= makes handle a relative path with -C option
-