- 03 Aug, 2018 30 commits
-
-
Alex Williamson authored
[ Upstream commit 48d8476b ] MAP_DMA ioctls might be called from various threads within a process, for example when using QEMU, the vCPU threads are often generating these calls and we therefore take a reference to that vCPU task. However, QEMU also supports vCPU hotplug on some machines and the task that called MAP_DMA may have exited by the time UNMAP_DMA is called, resulting in the mm_struct pointer being NULL and thus a failure to match against the existing mapping. To resolve this, we instead take a reference to the thread group_leader, which has the same mm_struct and resource limits, but is less likely exit, at least in the QEMU case. A difficulty here is guaranteeing that the capabilities of the group_leader match that of the calling thread, which we resolve by tracking CAP_IPC_LOCK at the time of calling rather than at an indeterminate time in the future. Potentially this also results in better efficiency as this is now recorded once per MAP_DMA ioctl. Reported-by:
Xu Yandong <xuyandong2@huawei.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Williamson authored
[ Upstream commit 002fe996 ] When we create an mdev device, we check for duplicates against the parent device and return -EEXIST if found, but the mdev device namespace is global since we'll link all devices from the bus. We do catch this later in sysfs_do_create_link_sd() to return -EEXIST, but with it comes a kernel warning and stack trace for trying to create duplicate sysfs links, which makes it an undesirable response. Therefore we should really be looking for duplicates across all mdev parent devices, or as implemented here, against our mdev device list. Using mdev_list to prevent duplicates means that we can remove mdev_parent.lock, but in order not to serialize mdev device creation and removal globally, we add mdev_device.active which allows UUIDs to be reserved such that we can drop the mdev_list_lock before the mdev device is fully in place. Two behavioral notes; first, mdev_parent.lock had the side-effect of serializing mdev create and remove ops per parent device. This was an implementation detail, not an intentional guarantee provided to the mdev vendor drivers. Vendor drivers can trivially provide this serialization internally if necessary. Second, review comments note the new -EAGAIN behavior when the device, and in particular the remove attribute, becomes visible in sysfs. If a remove is triggered prior to completion of mdev_device_create() the user will see a -EAGAIN error. While the errno is different, receiving an error during this period is not, the previous implementation returned -ENODEV for the same condition. Furthermore, the consistency to the user is improved in the case where mdev_device_remove_ops() returns error. Previously concurrent calls to mdev_device_remove() could see the device disappear with -ENODEV and return in the case of error. Now a user would see -EAGAIN while the device is in this transitory state. Reviewed-by:
Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Acked-by:
Halil Pasic <pasic@linux.ibm.com> Acked-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 28a68387 ] If the IOMMU group setup fails, the reset module is not released. Fixes: b5add544 ("vfio, platform: make reset driver a requirement by default") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
-
Scott Mayhew authored
[ Upstream commit 3171822f ] When running a fuzz tester against a KASAN-enabled kernel, the following splat periodically occurs. The problem occurs when the test sends a GETDEVICEINFO request with a malformed xdr array (size but no data) for gdia_notify_types and the array size is > 0x3fffffff, which results in an overflow in the value of nbytes which is passed to read_buf(). If the array size is 0x40000000, 0x80000000, or 0xc0000000, then after the overflow occurs, the value of nbytes 0, and when that happens the pointer returned by read_buf() points to the end of the xdr data (i.e. argp->end) when really it should be returning NULL. Fix this by returning NFS4ERR_BAD_XDR if the array size is > 1000 (this value is arbitrary, but it's the same threshold used by nfsd4_decode_bitmap()... in could really be any value >= 1 since it's expected to get at most a single bitmap in gdia_notify_types). [ 119.256854] ================================================================== [ 119.257611] BUG: KASAN: use-after-free in nfsd4_decode_getdeviceinfo+0x5a4/0x5b0 [nfsd] [ 119.258422] Read of size 4 at addr ffff880113ada000 by task nfsd/538 [ 119.259146] CPU: 0 PID: 538 Comm: nfsd Not tainted 4.17.0+ #1 [ 119.259662] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014 [ 119.261202] Call Trace: [ 119.262265] dump_stack+0x71/0xab [ 119.263371] print_address_description+0x6a/0x270 [ 119.264609] kasan_report+0x258/0x380 [ 119.265854] ? nfsd4_decode_getdeviceinfo+0x5a4/0x5b0 [nfsd] [ 119.267291] nfsd4_decode_getdeviceinfo+0x5a4/0x5b0 [nfsd] [ 119.268549] ? nfs4svc_decode_compoundargs+0xa5b/0x13c0 [nfsd] [ 119.269873] ? nfsd4_decode_sequence+0x490/0x490 [nfsd] [ 119.271095] nfs4svc_decode_compoundargs+0xa5b/0x13c0 [nfsd] [ 119.272393] ? nfsd4_release_compoundargs+0x1b0/0x1b0 [nfsd] [ 119.273658] nfsd_dispatch+0x183/0x850 [nfsd] [ 119.274918] svc_process+0x161c/0x31a0 [sunrpc] [ 119.276172] ? svc_printk+0x190/0x190 [sunrpc] [ 119.277386] ? svc_xprt_release+0x451/0x680 [sunrpc] [ 119.278622] nfsd+0x2b9/0x430 [nfsd] [ 119.279771] ? nfsd_destroy+0x1c0/0x1c0 [nfsd] [ 119.281157] kthread+0x2db/0x390 [ 119.282347] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 119.283756] ret_from_fork+0x35/0x40 [ 119.286041] Allocated by task 436: [ 119.287525] kasan_kmalloc+0xa0/0xd0 [ 119.288685] kmem_cache_alloc+0xe9/0x1f0 [ 119.289900] get_empty_filp+0x7b/0x410 [ 119.291037] path_openat+0xca/0x4220 [ 119.292242] do_filp_open+0x182/0x280 [ 119.293411] do_sys_open+0x216/0x360 [ 119.294555] do_syscall_64+0xa0/0x2f0 [ 119.295721] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 119.298068] Freed by task 436: [ 119.299271] __kasan_slab_free+0x130/0x180 [ 119.300557] kmem_cache_free+0x78/0x210 [ 119.301823] rcu_process_callbacks+0x35b/0xbd0 [ 119.303162] __do_softirq+0x192/0x5ea [ 119.305443] The buggy address belongs to the object at ffff880113ada000 which belongs to the cache filp of size 256 [ 119.308556] The buggy address is located 0 bytes inside of 256-byte region [ffff880113ada000, ffff880113ada100) [ 119.311376] The buggy address belongs to the page: [ 119.312728] page:ffffea00044eb680 count:1 mapcount:0 mapping:0000000000000000 index:0xffff880113ada780 [ 119.314428] flags: 0x17ffe000000100(slab) [ 119.315740] raw: 0017ffe000000100 0000000000000000 ffff880113ada780 00000001000c0001 [ 119.317379] raw: ffffea0004553c60 ffffea00045c11e0 ffff88011b167e00 0000000000000000 [ 119.319050] page dumped because: kasan: bad access detected [ 119.321652] Memory state around the buggy address: [ 119.322993] ffff880113ad9f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 119.324515] ffff880113ad9f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 119.326087] >ffff880113ada000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 119.327547] ^ [ 119.328730] ffff880113ada080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 119.330218] ffff880113ada100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 119.331740] ================================================================== Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit f9312a54 ] If the server returns NFS4ERR_SEQ_FALSE_RETRY or NFS4ERR_RETRY_UNCACHED_REP, then it thinks we're trying to replay an existing request. If so, then let's just bump the sequence ID and retry the operation. Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Zhouyang Jia authored
[ Upstream commit ef1ffbe7 ] When snd_ctl_add fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling snd_ctl_add. Signed-off-by:
Zhouyang Jia <jiazhouyang09@gmail.com> Acked-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Zhouyang Jia authored
[ Upstream commit 6d531e7b ] When snd_ctl_add fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling snd_ctl_add. Signed-off-by:
-
Olga Kornievskaia authored
[ Upstream commit 93b7f7ad ] Currently, when IO to DS fails, client returns the layout and retries against the MDS. However, then on umounting (inode eviction) it returns the layout again. This is because pnfs_return_layout() was changed in commit d78471d3 ("pnfs/blocklayout: set PNFS_LAYOUTRETURN_ON_ERROR") to always set NFS_LAYOUT_RETURN_REQUESTED so even if we returned the layout, it will be returned again. Instead, let's also check if we have already marked the layout invalid. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
-
Stephen Hemminger authored
[ Upstream commit 7bf7bb37 ] When finding the parent netvsc device, the search needs to be across all netvsc device instances (independent of network namespace). Find parent device of VF using upper_dev_get routine which searches only adjacent list. Fixes: e8ff40d4 ("hv_netvsc: improve VF device matching") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> netns aware byref Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Juergen Gross authored
[ Upstream commit 57f230ab ] The max number of slots used in xennet_get_responses() is set to MAX_SKB_FRAGS + (rx->status <= RX_COPY_THRESHOLD). In old kernel-xen MAX_SKB_FRAGS was 18, while nowadays it is 17. This difference is resulting in frequent messages "too many slots" and a reduced network throughput for some workloads (factor 10 below that of a kernel-xen based guest). Replacing MAX_SKB_FRAGS by XEN_NETIF_NR_SLOTS_MIN for calculation of the max number of slots to use solves that problem (tests showed no more messages "too many slots" and throughput was as high as with the kernel-xen based guest system). Replace MAX_SKB_FRAGS-2 by XEN_NETIF_NR_SLOTS_MIN-1 in netfront_tx_slot_available() for making it clearer what is really being tested without actually modifying the tested value. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Mark Rutland authored
[ Upstream commit c9484b98 ] Patch series "kcov: fix unexpected faults". These patches fix a few issues where KCOV code could trigger recursive faults, discovered while debugging a patch enabling KCOV for arch/arm: * On CONFIG_PREEMPT kernels, there's a small race window where __sanitizer_cov_trace_pc() can see a bogus kcov_area. * Lazy faulting of the vmalloc area can cause mutual recursion between fault handling code and __sanitizer_cov_trace_pc(). * During the context switch, switching the mm can cause the kcov_area to be transiently unmapped. These are prerequisites for enabling KCOV on arm, but the issues themsevles are generic -- we just happen to avoid them by chance rather than design on x86-64 and arm64. This patch (of 3): For kernels built with CONFIG_PREEMPT, some C code may execute before or after the interrupt handler, while the hardirq count is zero. In these cases, in_task() can return true. A task can be interrupted in the middle of a KCOV_DISABLE ioctl while it resets the task's kcov data via kcov_task_init(). Instrumented code executed during this period will call __sanitizer_cov_trace_pc(), and as in_task() returns true, will inspect t->kcov_mode before trying to write to t->kcov_area. In kcov_init_task() we update t->kcov_{mode,area,size} with plain stores, which may be re-ordered, torn, etc. Thus __sanitizer_cov_trace_pc() may see bogus values for any of these fields, and may attempt to write to memory which is not mapped. Let's avoid this by using WRITE_ONCE() to set t->kcov_mode, with a barrier() to ensure this is ordered before we clear t->kov_{area,size}. This ensures that any code execute while kcov_init_task() is preempted will either see valid values for t->kcov_{area,size}, or will see that t->kcov_mode is KCOV_MODE_DISABLED, and bail out without touching t->kcov_area. Link: http://lkml.kernel.org/r/20180504135535.53744-2-mark.rutland@arm.comSigned-off-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Petr Machata authored
[ Upstream commit 9e25826f ] Switchdev notifications for addition of SWITCHDEV_OBJ_ID_PORT_VLAN are distributed not only on clean addition, but also when flags on an existing VLAN are changed. mlxsw_sp_bridge_port_vlan_add() calls mlxsw_sp_port_vlan_get() to get at the port_vlan in question, which implicitly references the object. This then leads to discrepancies in reference counting when the VLAN is removed. spectrum.c warns about the problem when the module is removed: [13578.493090] WARNING: CPU: 0 PID: 2454 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2973 mlxsw_sp_port_remove+0xfd/0x110 [mlxsw_spectrum] [...] [13578.627106] Call Trace: [13578.629617] mlxsw_sp_fini+0x2a/0xe0 [mlxsw_spectrum] [13578.634748] mlxsw_core_bus_device_unregister+0x3e/0x130 [mlxsw_core] [13578.641290] mlxsw_pci_remove+0x13/0x40 [mlxsw_pci] [13578.646238] pci_device_remove+0x31/0xb0 [13578.650244] device_release_driver_internal+0x14f/0x220 [13578.655562] driver_detach+0x32/0x70 [13578.659183] bus_remove_driver+0x47/0xa0 [13578.663134] pci_unregister_driver+0x1e/0x80 [13578.667486] mlxsw_sp_module_exit+0xc/0x3fa [mlxsw_spectrum] [13578.673207] __x64_sys_delete_module+0x13b/0x1e0 [13578.677888] ? exit_to_usermode_loop+0x78/0x80 [13578.682374] do_syscall_64+0x39/0xe0 [13578.685976] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix by putting the port_vlan when mlxsw_sp_port_vlan_bridge_join() determines it's a flag-only change. Fixes: b3529af6 ("spectrum: Reference count VLAN entries") Signed-off-by:
Petr Machata <petrm@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Johannes Weiner authored
commit 7b0eb6b4 upstream. Arnd reports the following arm64 randconfig build error with the PSI patches that add another page flag: /git/arm-soc/arch/arm64/mm/init.c: In function 'mem_init': /git/arm-soc/include/linux/compiler.h:357:38: error: call to '__compiletime_assert_618' declared with attribute error: BUILD_BUG_ON failed: sizeof(struct page) > (1 << STRUCT_PAGE_MAX_SHIFT) The additional page flag causes other information stored in page->flags to get bumped into their own struct page member: #if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT+LAST_CPUPID_SHIFT <= BITS_PER_LONG - NR_PAGEFLAGS #define LAST_CPUPID_WIDTH LAST_CPUPID_SHIFT #else #define LAST_CPUPID_WIDTH 0 #endif #if defined(CONFIG_NUMA_BALANCING) && LAST_CPUPID_WIDTH == 0 #define LAST_CPUPID_NOT_IN_PAGE_FLAGS #endif which in turn causes the struct page size to exceed the size set in STRUCT_PAGE_MAX_SHIFT. This value is an an estimate used to size the VMEMMAP page array according to address space and struct page size. However, the check is performed - and triggers here - on a !VMEMMAP config, which consumes an additional 22 page bits for the sparse section id. When VMEMMAP is enabled, those bits are returned, cpupid doesn't need its own member, and the page passes the VMEMMAP check. Restrict that check to the situation it was meant to check: that we are sizing the VMEMMAP page array correctly. Says Arnd: Further experiments show that the build error already existed before, but was only triggered with larger values of CONFIG_NR_CPU and/or CONFIG_NODES_SHIFT that might be used in actual configurations but not in randconfig builds. With longer CPU and node masks, I could recreate the problem with kernels as old as linux-4.7 when arm64 NUMA support got added. Reported-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 2519c1bb upstream. Commit 57ea2a34 ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure") added an if statement that depends on another if statement that gcc doesn't see will initialize the "link" variable and gives the warning: "warning: 'link' may be used uninitialized in this function" It is really a false positive, but to quiet the warning, and also to make sure that it never actually is used uninitialized, initialize the "link" variable to NULL and add an if (!WARN_ON_ONCE(!link)) where the compiler thinks it could be used uninitialized. Cc: stable@vger.kernel.org Fixes: 57ea2a34 ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Artem Savkov authored
commit 57ea2a34 upstream. If enable_trace_kprobe fails to enable the probe in enable_k(ret)probe it returns an error, but does not unset the tp flags it set previously. This results in a probe being considered enabled and failures like being unable to remove the probe through kprobe_events file since probes_open() expects every probe to be disabled. Link: http://lkml.kernel.org/r/20180725102826.8300-1-asavkov@redhat.com Link: http://lkml.kernel.org/r/20180725142038.4765-1-asavkov@redhat.com Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 41a7dd42 ("tracing/kprobes: Support ftrace_event_file base multibuffer") Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Artem Savkov <asavkov@redhat.com> Signed-off-by:
-
Snild Dolkow authored
commit 3e536e22 upstream. There is a window for racing when printing directly to task->comm, allowing other threads to see a non-terminated string. The vsnprintf function fills the buffer, counts the truncated chars, then finally writes the \0 at the end. creator other vsnprintf: fill (not terminated) count the rest trace_sched_waking(p): ... memcpy(comm, p->comm, TASK_COMM_LEN) write \0 The consequences depend on how 'other' uses the string. In our case, it was copied into the tracing system's saved cmdlines, a buffer of adjacent TASK_COMM_LEN-byte buffers (note the 'n' where 0 should be): crash-arm64> x/1024s savedcmd->saved_cmdlines | grep 'evenk' 0xffffffd5b3818640: "irq/497-pwr_evenkworker/u16:12" ...and a strcpy out of there would cause stack corruption: [224761.522292] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffff9bf9783c78 crash-arm64> kbt | grep 'comm\|trace_print_context' #6 0xffffff9bf9783c78 in trace_print_context+0x18c(+396) comm (char [16]) = "irq/497-pwr_even" crash-arm64> rd 0xffffffd4d0e17d14 8 ffffffd4d0e17d14: 2f71726900000000 5f7277702d373934 ....irq/497-pwr_ ffffffd4d0e17d24: 726f776b6e657665 3a3631752f72656b evenkworker/u16: ffffffd4d0e17d34: f9780248ff003231 cede60e0ffffff9b 12..H.x......`.. ffffffd4d0e17d44: cede60c8ffffffd4 00000fffffffffd4 .....`.......... The workaround in e09e2867 (use strlcpy in __trace_find_cmdline) was likely needed because of this same bug. Solved by vsnprintf:ing to a local buffer, then using set_task_comm(). This way, there won't be a window where comm is not terminated. Link: http://lkml.kernel.org/r/20180726071539.188015-1-snild@sony.com Cc: stable@vger.kernel.org Fixes: bc0c38d1 ("ftrace: latency tracer infrastructure") Reviewed-by:
Snild Dolkow <snild@sony.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 15cc7864 upstream. There was a case that triggered a double free in event_trigger_callback() due to the called reg() function freeing the trigger_data and then it getting freed again by the error return by the caller. The solution there was to up the trigger_data ref count. Code inspection found that event_enable_trigger_func() has the same issue, but is not as easy to trigger (requires harder to trigger failures). It needs to be solved slightly different as it needs more to clean up when the reg() function fails. Link: http://lkml.kernel.org/r/20180725124008.7008e586@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 7862ad18 ("tracing: Add 'enable_event' and 'disable_event' event trigger commands") Reivewed-by:
-
Steven Rostedt (VMware) authored
commit 1863c387 upstream. Running the following: # cd /sys/kernel/debug/tracing # echo 500000 > buffer_size_kb [ Or some other number that takes up most of memory ] # echo snapshot > events/sched/sched_switch/trigger Triggers the following bug: ------------[ cut here ]------------ kernel BUG at mm/slub.c:296! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 6 PID: 6878 Comm: bash Not tainted 4.18.0-rc6-test+ #1066 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:kfree+0x16c/0x180 Code: 05 41 0f b6 72 51 5b 5d 41 5c 4c 89 d7 e9 ac b3 f8 ff 48 89 d9 48 89 da 41 b8 01 00 00 00 5b 5d 41 5c 4c 89 d6 e9 f4 f3 ff ff <0f> 0b 0f 0b 48 8b 3d d9 d8 f9 00 e9 c1 fe ff ff 0f 1f 40 00 0f 1f RSP: 0018:ffffb654436d3d88 EFLAGS: 00010246 RAX: ffff91a9d50f3d80 RBX: ffff91a9d50f3d80 RCX: ffff91a9d50f3d80 RDX: 00000000000006a4 RSI: ffff91a9de5a60e0 RDI: ffff91a9d9803500 RBP: ffffffff8d267c80 R08: 00000000000260e0 R09: ffffffff8c1a56be R10: fffff0d404543cc0 R11: 0000000000000389 R12: ffffffff8c1a56be R13: ffff91a9d9930e18 R14: ffff91a98c0c2890 R15: ffffffff8d267d00 FS: 00007f363ea64700(0000) GS:ffff91a9de580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055c1cacc8e10 CR3: 00000000d9b46003 CR4: 00000000001606e0 Call Trace: event_trigger_callback+0xee/0x1d0 event_trigger_write+0xfc/0x1a0 __vfs_write+0x33/0x190 ? handle_mm_fault+0x115/0x230 ? _cond_resched+0x16/0x40 vfs_write+0xb0/0x190 ksys_write+0x52/0xc0 do_syscall_64+0x5a/0x160 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f363e16ab50 Code: 73 01 c3 48 8b 0d 38 83 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 79 db 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 1e e3 01 00 48 89 04 24 RSP: 002b:00007fff9a4c6378 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f363e16ab50 RDX: 0000000000000009 RSI: 000055c1cacc8e10 RDI: 0000000000000001 RBP: 000055c1cacc8e10 R08: 00007f363e435740 R09: 00007f363ea64700 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000009 R13: 0000000000000001 R14: 00007f363e4345e0 R15: 00007f363e4303c0 Modules linked in: ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device i915 snd_pcm snd_timer i2c_i801 snd soundcore i2c_algo_bit drm_kms_helper 86_pkg_temp_thermal video kvm_intel kvm irqbypass wmi e1000e ---[ end trace d301afa879ddfa25 ]--- The cause is because the register_snapshot_trigger() call failed to allocate the snapshot buffer, and then called unregister_trigger() which freed the data that was passed to it. Then on return to the function that called register_snapshot_trigger(), as it sees it failed to register, it frees the trigger_data again and causes a double free. By calling event_trigger_init() on the trigger_data (which only ups the reference counter for it), and then event_trigger_free() afterward, the trigger_data would not get freed by the registering trigger function as it would only up and lower the ref count for it. If the register trigger function fails, then the event_trigger_free() called after it will free the trigger data normally. Link: http://lkml.kernel.org/r/20180724191331.738eb819@gandalf.local.home Cc: stable@vger.kerne.org Fixes: 93e31ffb ("tracing: Add 'snapshot' event trigger command") Reported-by:
-
Tejun Heo authored
commit b512719f upstream. While forking, if delayacct init fails due to memory shortage, it continues expecting all delayacct users to check task->delays pointer against NULL before dereferencing it, which all of them used to do. Commit c96f5471 ("delayacct: Account blkio completion on the correct task"), while updating delayacct_blkio_end() to take the target task instead of always using %current, made the function test NULL on %current->delays and then continue to operated on @p->delays. If %current succeeded init while @p didn't, it leads to the following crash. BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: __delayacct_blkio_end+0xc/0x40 PGD 8000001fd07e1067 P4D 8000001fd07e1067 PUD 1fcffbb067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 4 PID: 25774 Comm: QIOThread0 Not tainted 4.16.0-9_fbk1_rc2_1180_g6b593215b4d7 #9 RIP: 0010:__delayacct_blkio_end+0xc/0x40 Call Trace: try_to_wake_up+0x2c0/0x600 autoremove_wake_function+0xe/0x30 __wake_up_common+0x74/0x120 wake_up_page_bit+0x9c/0xe0 mpage_end_io+0x27/0x70 blk_update_request+0x78/0x2c0 scsi_end_request+0x2c/0x1e0 scsi_io_completion+0x20b/0x5f0 blk_mq_complete_request+0xa2/0x100 ata_scsi_qc_complete+0x79/0x400 ata_qc_complete_multiple+0x86/0xd0 ahci_handle_port_interrupt+0xc9/0x5c0 ahci_handle_port_intr+0x54/0xb0 ahci_single_level_irq_intr+0x3b/0x60 __handle_irq_event_percpu+0x43/0x190 handle_irq_event_percpu+0x20/0x50 handle_irq_event+0x2a/0x50 handle_edge_irq+0x80/0x1c0 handle_irq+0xaf/0x120 do_IRQ+0x41/0xc0 common_interrupt+0xf/0xf Fix it by updating delayacct_blkio_end() check @p->delays instead. Link: http://lkml.kernel.org/r/20180724175542.GP1934745@devbig577.frc2.facebook.com Fixes: c96f5471 ("delayacct: Account blkio completion on the correct task") Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Dave Jones <dsj@fb.com> Debugged-by:
-
Shakeel Butt authored
commit d97e5e61 upstream. The size of kvm's shadow page tables corresponds to the size of the guest virtual machines on the system. Large VMs can spend a significant amount of memory as shadow page tables which can not be left as system memory overhead. So, account shadow page tables to the kmemcg. [shakeelb@google.com: replace (GFP_KERNEL|__GFP_ACCOUNT) with GFP_KERNEL_ACCOUNT] Link: http://lkml.kernel.org/r/20180629140224.205849-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20180627181349.149778-1-shakeelb@google.comSigned-off-by:
Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Peter Feiner <pfeiner@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
KT Liao authored
commit 6f88a643 upstream. Add ELAN0622 to ACPI mapping table to support Elan touchpad found in Ideapad 330-15AST. Signed-off-by:
KT Liao <kt.liao@emc.com.tw> Reported-by:
Anant Shende <anantshende@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Chen-Yu Tsai authored
commit 384cf428 upstream. The Lenovo LaVie Z laptop requires i8042 to be reset in order to consistently detect its Elantech touchpad. The nomux and kbdreset quirks are not sufficient. It's possible the other LaVie Z models from NEC require this as well. Cc: stable@vger.kernel.org Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Donald Shanty III authored
commit 938f4500 upstream. This allows Elan driver to bind to the touchpad found in Lenovo Ideapad 330 series laptops. Signed-off-by:
Donald Shanty III <dshanty@protonmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Marek Szyprowski authored
commit e935dba1 upstream. Since Linux v4.10 release (commit 1d9174fb "PM / Runtime: Defer resuming of the device in pm_runtime_force_resume()"), pm_runtime_force_resume() function doesn't runtime resume device if it was not runtime active before system suspend. Thus, driver should not do any register access after pm_runtime_force_resume() without checking the runtime status of the device. To fix this issue, simply move s3c64xx_spi_hwinit() call to s3c64xx_spi_runtime_resume() to ensure that hardware is always properly initialized. This fixes Synchronous external abort issue on system suspend/resume cycle on newer Exynos SoCs. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Andrew Morton authored
commit 06892cc1 upstream. gcc-4.4.4 has issues with initialization of anonymous unions: drivers/infiniband/ulp/srpt/ib_srpt.c: In function 'srpt_zerolength_write': drivers/infiniband/ulp/srpt/ib_srpt.c:854: error: unknown field 'wr_cqe' specified in initializer drivers/infiniband/ulp/srpt/ib_srpt.c:854: warning: initialization makes integer from pointer without a cast Work aound this. Fixes: 2a78cb4d ("IB/srpt: Fix an out-of-bounds stack access in srpt_zerolength_write()") Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit 2a78cb4d upstream. Avoid triggering an out-of-bounds stack access by changing the type of 'wr' from ib_send_wr into ib_rdma_wr. This patch fixes the following KASAN bug report: BUG: KASAN: stack-out-of-bounds in rxe_post_send+0x7a9/0x9a0 [rdma_rxe] Read of size 8 at addr ffff880068197a48 by task kworker/2:1/44 Workqueue: ib_cm cm_work_handler [ib_cm] Call Trace: dump_stack+0x8e/0xcd print_address_description+0x6f/0x280 kasan_report+0x25a/0x380 __asan_load8+0x54/0x90 rxe_post_send+0x7a9/0x9a0 [rdma_rxe] srpt_zerolength_write+0xf0/0x180 [ib_srpt] srpt_cm_rtu_recv+0x68/0x110 [ib_srpt] srpt_rdma_cm_handler+0xbb/0x15b [ib_srpt] cma_ib_handler+0x1aa/0x4a0 [rdma_cm] cm_process_work+0x30/0x100 [ib_cm] cm_work_handler+0xa86/0x351b [ib_cm] process_one_work+0x475/0x9f0 worker_thread+0x69/0x690 kthread+0x1ad/0x1d0 ret_from_fork+0x3a/0x50 Fixes: aaf45bd8 ("IB/srpt: Detect session shutdown reliably") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Andrew Morton authored
commit 6ee68773 upstream. gcc-4.4.4 has issues with initialization of anonymous unions. drivers/infiniband/core/verbs.c: In function '__ib_drain_sq': drivers/infiniband/core/verbs.c:2204: error: unknown field 'wr_cqe' specified in initializer drivers/infiniband/core/verbs.c:2204: warning: initialization makes integer from pointer without a cast Work around this. Fixes: a1ae7d03 ("RDMA/core: Avoid that ib_drain_qp() triggers an out-of-bounds stack access") Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Bart Van Assche authored
commit a1ae7d03 upstream. This patch fixes the following KASAN complaint: ================================================================== BUG: KASAN: stack-out-of-bounds in rxe_post_send+0x77d/0x9b0 [rdma_rxe] Read of size 8 at addr ffff880061aef860 by task 01/1080 CPU: 2 PID: 1080 Comm: 01 Not tainted 4.16.0-rc3-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x85/0xc7 print_address_description+0x65/0x270 kasan_report+0x231/0x350 rxe_post_send+0x77d/0x9b0 [rdma_rxe] __ib_drain_sq+0x1ad/0x250 [ib_core] ib_drain_qp+0x9/0x30 [ib_core] srp_destroy_qp+0x51/0x70 [ib_srp] srp_free_ch_ib+0xfc/0x380 [ib_srp] srp_create_target+0x1071/0x19e0 [ib_srp] kernfs_fop_write+0x180/0x210 __vfs_write+0xb1/0x2e0 vfs_write+0xf6/0x250 SyS_write+0x99/0x110 do_syscall_64+0xee/0x2b0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 The buggy address belongs to the page: page:ffffea000186bbc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffffea000186bbe0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880061aef700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880061aef780: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 >ffff880061aef800: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 f2 f2 f2 f2 ^ ffff880061aef880: f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 f2 f2 ffff880061aef900: f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Fixes: 765d6774 ("IB: new common API for draining queues") Signed-off-by:
-
Lixin Wang authored
commit e0638fa4 upstream. Reference count of device node was increased in of_i2c_register_device, but without decreasing it in i2c_unregister_device. Then the added device node will never be released. Fix this by adding the of_node_put. Signed-off-by:
Lixin Wang <alan.1.wang@nokia-sbell.com> Tested-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Kees Cook authored
commit e01e8063 upstream. One of the classes of kernel stack content leaks[1] is exposing the contents of prior heap or stack contents when a new process stack is allocated. Normally, those stacks are not zeroed, and the old contents remain in place. In the face of stack content exposure flaws, those contents can leak to userspace. Fixing this will make the kernel no longer vulnerable to these flaws, as the stack will be wiped each time a stack is assigned to a new process. There's not a meaningful change in runtime performance; it almost looks like it provides a benefit. Performing back-to-back kernel builds before: Run times: 157.86 157.09 158.90 160.94 160.80 Mean: 159.12 Std Dev: 1.54 and after: Run times: 159.31 157.34 156.71 158.15 160.81 Mean: 158.46 Std Dev: 1.46 Instead of making this a build or runtime config, Andy Lutomirski recommended this just be enabled by default. [1] A noisy search for many kinds of stack content leaks can be seen here: https://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=linux+kernel+stack+leak I did some more with perf and cycle counts on running 100,000 execs of /bin/true. before: Cycles: 218858861551 218853036130 214727610969 227656844122 224980542841 Mean: 221015379122.60 Std Dev: 4662486552.47 after: Cycles: 213868945060 213119275204 211820169456 224426673259 225489986348 Mean: 217745009865.40 Std Dev: 5935559279.99 It continues to look like it's faster, though the deviation is rather wide, but I'm not sure what I could do that would be less noisy. I'm open to ideas! Link: http://lkml.kernel.org/r/20180221021659.GA37073@beastSigned-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
-
- 28 Jul, 2018 10 commits
-
-
Greg Kroah-Hartman authored
-
Arnd Bergmann authored
Starting with gcc-8.1, we get a warning about all system call definitions, which use an alias between functions with incompatible prototypes, e.g.: In file included from ../mm/process_vm_access.c:19: ../include/linux/syscalls.h:211:18: warning: 'sys_process_vm_readv' alias between functions of incompatible types 'long int(pid_t, const struct iovec *, long unsigned int, const struct iovec *, long unsigned int, long unsigned int)' {aka 'long int(int, const struct iovec *, long unsigned int, const struct iovec *, long unsigned int, long unsigned int)'} and 'long int(long int, long int, long int, long int, long int, long int)' [-Wattribute-alias] asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \ ^~~ ../include/linux/syscalls.h:207:2: note: in expansion of macro '__SYSCALL_DEFINEx' __SYSCALL_DEFINEx(x, sname, __VA_ARGS__) ^~~~~~~~~~~~~~~~~ ../include/linux/syscalls.h:201:36: note: in expansion of macro 'SYSCALL_DEFINEx' #define SYSCALL_DEFINE6(name, ...) SYSCALL_DEFINEx(6, _##name, __VA_ARGS__) ^~~~~~~~~~~~~~~ ../mm/process_vm_access.c:300:1: note: in expansion of macro 'SYSCALL_DEFINE6' SYSCALL_DEFINE6(process_vm_readv, pid_t, pid, const struct iovec __user *, lvec, ^~~~~~~~~~~~~~~ ../include/linux/syscalls.h:215:18: note: aliased declaration here asmlinkage long SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \ ^~~ ../include/linux/syscalls.h:207:2: note: in expansion of macro '__SYSCALL_DEFINEx' __SYSCALL_DEFINEx(x, sname, __VA_ARGS__) ^~~~~~~~~~~~~~~~~ ../include/linux/syscalls.h:201:36: note: in expansion of macro 'SYSCALL_DEFINEx' #define SYSCALL_DEFINE6(name, ...) SYSCALL_DEFINEx(6, _##name, __VA_ARGS__) ^~~~~~~~~~~~~~~ ../mm/process_vm_access.c:300:1: note: in expansion of macro 'SYSCALL_DEFINE6' SYSCALL_DEFINE6(process_vm_readv, pid_t, pid, const struct iovec __user *, lvec, This is really noisy and does not indicate a real problem. In the latest mainline kernel, this was addressed by commit bee20031 ("disable -Wattribute-alias warning for SYSCALL_DEFINEx()"), which seems too invasive to backport. This takes a much simpler approach and just disables the warning across the kernel. Signed-off-by: -
Roman Fietze authored
commit 393753b2 upstream. Inside m_can_chip_config(), when setting up the new value of the CCCR, the CCCR_NISO bit is not cleared like the others, CCCR_TEST, CCCR_MON, CCCR_BRSE and CCCR_FDOE, before checking the can.ctrlmode bits for CAN_CTRLMODE_FD_NON_ISO. This way once the controller was configured for CAN_CTRLMODE_FD_NON_ISO, this mode could never be cleared again. This fix is only relevant for controllers with version 3.1.x or 3.2.x. Older versions do not support NISO. Signed-off-by:
Roman Fietze <roman.fietze@telemotive.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Stephane Grosjean authored
commit 5d4c94ed upstream. The DMA logic in firmwares < v3.3.0 embedded in the PCAN-PCIe FD cards family is not capable of handling a mix of 32-bit and 64-bit logical addresses. If the board is equipped with 2 or 4 CAN ports, then such a situation might lead to a PCIe Bus Error "Malformed TLP" packet as well as "irq xx: nobody cared" issue. This patch adds a workaround that requests only 32-bit DMA addresses when these might be allocated outside of the 4 GB area. This issue has been fixed in firmware v3.3.0 and next. Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Anssi Hannula authored
commit 83997997 upstream. RX overflow interrupt (RXOFLW) is disabled even though xcan_interrupt() processes it. This means that an RX overflow interrupt will only be processed when another interrupt gets asserted (e.g. for RX/TX). Fix that by enabling the RXOFLW interrupt. Fixes: b1201e44 ("can: xilinx CAN controller support") Signed-off-by:
Anssi Hannula <anssi.hannula@bitwise.fi> Cc: Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Anssi Hannula authored
commit 2f4f0f33 upstream. xcan_interrupt() clears ERROR|RXOFLV|BSOFF|ARBLST interrupts if any of them is asserted. This does not take into account that some of them could have been asserted between interrupt status read and interrupt clear, therefore clearing them without handling them. Fix the code to only clear those interrupts that it knows are asserted and therefore going to be processed in xcan_err_interrupt(). Fixes: b1201e44 ("can: xilinx CAN controller support") Signed-off-by:
-
Anssi Hannula authored
commit 620050d9 upstream. The xilinx_can driver assumes that the TXOK interrupt only clears after it has been acknowledged as many times as there have been successfully sent frames. However, the documentation does not mention such behavior, instead saying just that the interrupt is cleared when the clear bit is set. Similarly, testing seems to also suggest that it is immediately cleared regardless of the amount of frames having been sent. Performing some heavy TX load and then going back to idle has the tx_head drifting further away from tx_tail over time, steadily reducing the amount of frames the driver keeps in the TX FIFO (but not to zero, as the TXOK interrupt always frees up space for 1 frame from the driver's perspective, so frames continue to be sent) and delaying the local echo frames. The TX FIFO tracking is also otherwise buggy as it does not account for TX FIFO being cleared after software resets, causing BUG!, TX FIFO full when queue awake! messages to be output. There does not seem to be any way to accurately track the state of the TX FIFO for local echo support while using the full TX FIFO. The Zynq version of the HW (but not the soft-AXI version) has watermark programming support and with it an additional TX-FIFO-empty interrupt bit. Modify the driver to only put 1 frame into TX FIFO at a time on soft-AXI and 2 frames at a time on Zynq. On Zynq the TXFEMP interrupt bit is used to detect whether 1 or 2 frames have been sent at interrupt processing time. Tested with the integrated CAN on Zynq-7000 SoC. The 1-frame-FIFO mode was also tested. An alternative way to solve this would be to drop local echo support but keep using the full TX FIFO. v2: Add FIFO space check before TX queue wake with locking to synchronize with queue stop. This avoids waking the queue when xmit() had just filled it. v3: Keep local echo support and reduce the amount of frames in FIFO instead as suggested by Marc Kleine-Budde. Fixes: b1201e44 ("can: xilinx CAN controller support") Signed-off-by:
-
Anssi Hannula authored
commit 2574fe54 upstream. The xilinx_can driver performs a software reset when an RX overrun is detected. This causes the device to enter Configuration mode where no messages are received or transmitted. The documentation does not mention any need to perform a reset on an RX overrun, and testing by inducing an RX overflow also indicated that the device continues to work just fine without a reset. Remove the software reset. Tested with the integrated CAN on Zynq-7000 SoC. Fixes: b1201e44 ("can: xilinx CAN controller support") Signed-off-by:
-
Anssi Hannula authored
commit 877e0b75 upstream. The xilinx_can driver contains no mechanism for propagating recovery from CAN_STATE_ERROR_WARNING and CAN_STATE_ERROR_PASSIVE. Add such a mechanism by factoring the handling of XCAN_STATE_ERROR_PASSIVE and XCAN_STATE_ERROR_WARNING out of xcan_err_interrupt and checking for recovery after RX and TX if the interface is in one of those states. Tested with the integrated CAN on Zynq-7000 SoC. Fixes: b1201e44 ("can: xilinx CAN controller support") Signed-off-by:
-
Anssi Hannula authored
commit 8ebd83bd upstream. There are several issues with the suspend/resume handling code of the driver: - The device is attached and detached in the runtime_suspend() and runtime_resume() callbacks if the interface is running. However, during xcan_chip_start() the interface is considered running, causing the resume handler to incorrectly call netif_start_queue() at the beginning of xcan_chip_start(), and on xcan_chip_start() error return the suspend handler detaches the device leaving the user unable to bring-up the device anymore. - The device is not brought properly up on system resume. A reset is done and the code tries to determine the bus state after that. However, after reset the device is always in Configuration mode (down), so the state checking code does not make sense and communication will also not work. - The suspend callback tries to set the device to sleep mode (low-power mode which monitors the bus and brings the device back to normal mode on activity), but then immediately disables the clocks (possibly before the device reaches the sleep mode), which does not make sense to me. If a clean shutdown is wanted before disabling clocks, we can just bring it down completely instead of only sleep mode. Reorganize the PM code so that only the clock logic remains in the runtime PM callbacks and the system PM callbacks contain the device bring-up/down logic. This makes calling the runtime PM callbacks during e.g. xcan_chip_start() safe. The system PM callbacks now simply call common code to start/stop the HW if the interface was running, replacing the broken code from before. xcan_chip_stop() is updated to use the common reset code so that it will wait for the reset to complete. Reset also disables all interrupts so do not do that separately. Also, the device_may_wakeup() checks are removed as the driver does not have wakeup support. Tested on Zynq-7000 integrated CAN. Signed-off-by:
-
