- 08 Dec, 2021 8 commits
-
-
Qu Wenruo authored
I hit the BUG_ON() with generic/475 test case, and to my surprise, all callers of btrfs_del_root_ref() are already aborting transaction, thus there is not need for such BUG_ON(), just go to @out label and caller will properly handle the error. CC: stable@vger.kernel.org # 5.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Johannes Thumshirn authored
When finishing a zone that is used by a dedicated data relocation block group, also remove its reference from fs_info, so we're not trying to use a full block group for allocations during data relocation, which will always fail. The result is we're not making any forward progress and end up in a deadlock situation. Fixes: c2707a25 ("btrfs: zoned: add a dedicated data relocation block group") Reviewed-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
-
Johannes Thumshirn authored
Fstests runs on my VMs have show several kmemleak reports like the following. unreferenced object 0xffff88811ae59080 (size 64): comm "xfs_io", pid 12124, jiffies 4294987392 (age 6.368s) hex dump (first 32 bytes): 00 c0 1c 00 00 00 00 00 ff cf 1c 00 00 00 00 00 ................ 90 97 e5 1a 81 88 ff ff 90 97 e5 1a 81 88 ff ff ................ backtrace: [<00000000ac0176d2>] ulist_add_merge+0x60/0x150 [btrfs] [<0000000076e9f312>] set_state_bits+0x86/0xc0 [btrfs] [<0000000014fe73d6>] set_extent_bit+0x270/0x690 [btrfs] [<000000004f675208>] set_record_extent_bits+0x19/0x20 [btrfs] [<00000000b96137b1>] qgroup_reserve_data+0x274/0x310 [btrfs] [<0000000057e9dcbb>] btrfs_check_data_free_space+0x5c/0xa0 [btrfs] [<0000000019c4511d>] btrfs_delalloc_reserve_space+0x1b/0xa0 [btrfs] [<000000006d37e007>] btrfs_dio_iomap_begin+0x415/0x970 [btrfs] [<00000000fb8a74b8>] iomap_iter+0x161/0x1e0 [<0000000071dff6ff>] __iomap_dio_rw+0x1df/0x700 [<000000002567ba53>] iomap_dio_rw+0x5/0x20 [<0000000072e555f8>] btrfs_file_write_iter+0x290/0x530 [btrfs] [<000000005eb3d845>] new_sync_write+0x106/0x180 [<000000003fb505bf>] vfs_write+0x24d/0x2f0 [<000000009bb57d37>] __x64_sys_pwrite64+0x69/0xa0 [<000000003eba3fdf>] do_syscall_64+0x43/0x90 In case brtfs_qgroup_reserve_data() or btrfs_delalloc_reserve_metadata() fail the allocated extent_changeset will not be freed. So in btrfs_check_data_free_space() and btrfs_delalloc_reserve_space() free the allocated extent_changeset to get rid of the allocated memory. The issue currently only happens in the direct IO write path, but only after 65b3c08606e5 ("btrfs: fix ENOSPC failure when attempting direct IO write into NOCOW range"), and also at defrag_one_locked_target(). Every other place is always calling extent_changeset_free() even if its call to btrfs_delalloc_reserve_space() or btrfs_check_data_free_space() has failed. CC: stable@vger.kernel.org # 5.15+ Reviewed-by:Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Naohiro Aota authored
There is a report of a transaction abort of -EAGAIN with the following script. #!/bin/sh for d in sda sdb; do mkfs.btrfs -d single -m single -f /dev/\${d} done mount /dev/sda /mnt/test mount /dev/sdb /mnt/scratch for dir in test scratch; do echo 3 >/proc/sys/vm/drop_caches fio --directory=/mnt/\${dir} --name=fio.\${dir} --rw=read --size=50G --bs=64m \ --numjobs=$(nproc) --time_based --ramp_time=5 --runtime=480 \ --group_reporting |& tee /dev/shm/fio.\${dir} echo 3 >/proc/sys/vm/drop_caches done for d in sda sdb; do umount /dev/\${d} done The stack trace is shown in below. [3310.967991] BTRFS: error (device sda) in btrfs_commit_transaction:2341: errno=-11 unknown (Error while writing out transaction) [3310.968060] BTRFS info (device sda): forced readonly [3310.968064] BTRFS warning (device sda): Skipping commit of aborted transaction. [3310.968065] ------------[ cut here ]------------ [3310.968066] BTRFS: Transaction aborted (error -11) [3310.968074] WARNING: CPU: 14 PID: 1684 at fs/btrfs/transaction.c:1946 btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968131] CPU: 14 PID: 1684 Comm: fio Not tainted 5.14.10-300.fc35.x86_64 #1 [3310.968135] Hardware name: DIAWAY Tartu/Tartu, BIOS V2.01.B10 04/08/2021 [3310.968137] RIP: 0010:btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968144] RSP: 0018:ffffb284ce393e10 EFLAGS: 00010282 [3310.968147] RAX: 0000000000000026 RBX: ffff973f147b0f60 RCX: 0000000000000027 [3310.968149] RDX: ffff974ecf098a08 RSI: 0000000000000001 RDI: ffff974ecf098a00 [3310.968150] RBP: ffff973f147b0f08 R08: 0000000000000000 R09: ffffb284ce393c48 [3310.968151] R10: ffffb284ce393c40 R11: ffffffff84f47468 R12: ffff973f101bfc00 [3310.968153] R13: ffff971f20cf2000 R14: 00000000fffffff5 R15: ffff973f147b0e58 [3310.968154] FS: 00007efe65468740(0000) GS:ffff974ecf080000(0000) knlGS:0000000000000000 [3310.968157] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3310.968158] CR2: 000055691bcbe260 CR3: 000000105cfa4001 CR4: 0000000000770ee0 [3310.968160] PKRU: 55555554 [3310.968161] Call Trace: [3310.968167] ? dput+0xd4/0x300 [3310.968174] btrfs_sync_file+0x3f1/0x490 [3310.968180] __x64_sys_fsync+0x33/0x60 [3310.968185] do_syscall_64+0x3b/0x90 [3310.968190] entry_SYSCALL_64_after_hwframe+0x44/0xae [3310.968194] RIP: 0033:0x7efe6557329b [3310.968200] RSP: 002b:00007ffe0236ebc0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a [3310.968203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efe6557329b [3310.968204] RDX: 0000000000000000 RSI: 00007efe58d77010 RDI: 0000000000000006 [3310.968205] RBP: 0000000004000000 R08: 0000000000000000 R09: 00007efe58d77010 [3310.968207] R10: 0000000016cacc0c R11: 0000000000000293 R12: 00007efe5ce95980 [3310.968208] R13: 0000000000000000 R14: 00007efe6447c790 R15: 0000000c80000000 [3310.968212] ---[ end trace 1a346f4d3c0d96ba ]--- [3310.968214] BTRFS: error (device sda) in cleanup_transaction:1946: errno=-11 unknown The abort occurs because of a write hole while writing out freeing tree nodes of a tree-log tree. For zoned btrfs, we re-dirty a freed tree node to ensure btrfs can write the region and does not leave a hole on write on a zoned device. The current code fails to re-dirty a node when the tree-log tree's depth is greater or equal to 2. That leads to a transaction abort with -EAGAIN. Fix the issue by properly re-dirtying a node on walking up the tree. Fixes: d3575156 ("btrfs: zoned: redirty released extent buffers") CC: stable@vger.kernel.org # 5.12+ Link: https://github.com/kdave/btrfs-progs/issues/415Reviewed-by: -
Josef Bacik authored
generic/484 fails sometimes with compression on because the write ends up small enough that it goes into the btree. This means that we never call mapping_set_error() on the inode itself, because the page gets marked as fine when we inline it into the metadata. When the metadata writeback happens we see it and abort the transaction properly and mark the fs as readonly, however we don't do the mapping_set_error() on anything. In syncfs() we will simply return 0 if the sb is marked read-only, so we can't check for this in our syncfs callback. The only way the error gets returned if we called mapping_set_error() on something. Fix this by calling mapping_set_error() on the btree inode mapping. This allows us to properly return an error on syncfs and pass generic/484 with compression on. Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Josef Bacik authored
I got dmesg errors on generic/281 on our overnight fstests. Looking at the history this happens occasionally, with errors like this WARNING: CPU: 0 PID: 673217 at fs/btrfs/extent_io.c:6848 assert_eb_page_uptodate+0x3f/0x50 CPU: 0 PID: 673217 Comm: kworker/u4:13 Tainted: G W 5.16.0-rc2+ #469 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: btrfs-cache btrfs_work_helper RIP: 0010:assert_eb_page_uptodate+0x3f/0x50 RSP: 0018:ffffae598230bc60 EFLAGS: 00010246 RAX: 0017ffffc0002112 RBX: ffffebaec4100900 RCX: 0000000000001000 RDX: ffffebaec45733c7 RSI: ffffebaec4100900 RDI: ffff9fd98919f340 RBP: 0000000000000d56 R08: ffff9fd98e300000 R09: 0000000000000000 R10: 0001207370a91c50 R11: 0000000000000000 R12: 00000000000007b0 R13: ffff9fd98919f340 R14: 0000000001500000 R15: 0000000001cb0000 FS: 0000000000000000(0000) GS:ffff9fd9fbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f549fcf8940 CR3: 0000000114908004 CR4: 0000000000370ef0 Call Trace: extent_buffer_test_bit+0x3f/0x70 free_space_test_bit+0xa6/0xc0 load_free_space_tree+0x1d6/0x430 caching_thread+0x454/0x630 ? rcu_read_lock_sched_held+0x12/0x60 ? rcu_read_lock_sched_held+0x12/0x60 ? rcu_read_lock_sched_held+0x12/0x60 ? lock_release+0x1f0/0x2d0 btrfs_work_helper+0xf2/0x3e0 ? lock_release+0x1f0/0x2d0 ? finish_task_switch.isra.0+0xf9/0x3a0 process_one_work+0x270/0x5a0 worker_thread+0x55/0x3c0 ? process_one_work+0x5a0/0x5a0 kthread+0x174/0x1a0 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 This happens because we're trying to read from a extent buffer page that is !PageUptodate. This happens because we will clear the page uptodate when we have an IO error, but we don't clear the extent buffer uptodate. If we do a read later and find this extent buffer we'll think its valid and not return an error, and then trip over this warning. Fix this by also clearing uptodate on the extent buffer when this happens, so that we get an error when we do a btrfs_search_slot() and find this block later. CC: stable@vger.kernel.org # 5.4+ Signed-off-by:
-
Josef Bacik authored
We've always been failing generic/260 because it's testing things we actually don't care about and thus won't fail for. However we probably should fail for fstrim_range->start == U64_MAX since we clearly can't trim anything past that. This in combination with an update to generic/260 will allow us to pass this test properly. Signed-off-by:
-
Dan Carpenter authored
If memdup_user() fails the error handing will crash when it tries to kfree() an error pointer. Just return directly because there is no cleanup required. Fixes: 1a15eb72 ("btrfs: use btrfs_get_dev_args_from_path in dev removal ioctls") Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
- 26 Nov, 2021 1 commit
-
-
Qu Wenruo authored
[BUG] Fstests generic/027 is pretty easy to trigger a slow but steady memory leak if run with "-o compress=lzo" mount option. Normally one single run of generic/027 is enough to eat up at least 4G ram. [CAUSE] In commit d4088803 ("btrfs: subpage: make lzo_compress_pages() compatible") we changed how @page_in is released. But that refactoring makes @page_in only released after all pages being compressed. This leaves error path not releasing @page_in. And by "error path" things like incompressible data will also be treated as an error (-E2BIG). Thus it can cause a memory leak if even nothing wrong happened. [FIX] Add check under @out label to release @page_in when needed, so when we hit any error, the input page is properly released. Reported-by:
-
- 16 Nov, 2021 6 commits
-
-
Nikolay Borisov authored
The v2 balance ioctl has been introduced more than 9 years ago. Users of the old v1 ioctl should have long been migrated to it. It's time we deprecate it and eventually remove it. The only known user is in btrfs-progs that tries v1 as a fallback in case v2 is not supported. This is not necessary anymore. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Colin Ian King authored
The bitfields have_csum and io_error are currently signed which is not recommended as the representation is an implementation defined behaviour. Fix this by making the bit-fields unsigned ints. Fixes: 2c363954 ("btrfs: scrub: remove the anonymous structure from scrub_page") Reviewed-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
Wang Yugui authored
When a disk has write caching disabled, we skip submission of a bio with flush and sync requests before writing the superblock, since it's not needed. However when the integrity checker is enabled, this results in reports that there are metadata blocks referred by a superblock that were not properly flushed. So don't skip the bio submission only when the integrity checker is enabled for the sake of simplicity, since this is a debug tool and not meant for use in non-debug builds. fstests/btrfs/220 trigger a check-integrity warning like the following when CONFIG_BTRFS_FS_CHECK_INTEGRITY=y and the disk with WCE=0. btrfs: attempt to write superblock which references block M @5242880 (sdb2/5242880/0) which is not flushed out of disk's write cache (block flush_gen=1, dev->flush_gen=0)! ------------[ cut here ]------------ WARNING: CPU: 28 PID: 843680 at fs/btrfs/check-integrity.c:2196 btrfsic_process_written_superblock+0x22a/0x2a0 [btrfs] CPU: 28 PID: 843680 Comm: umount Not tainted 5.15.0-0.rc5.39.el8.x86_64 #1 Hardware name: Dell Inc. Precision T7610/0NK70N, BIOS A18 09/11/2019 RIP: 0010:btrfsic_process_written_superblock+0x22a/0x2a0 [btrfs] RSP: 0018:ffffb642afb47940 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 00000000ffffffff RSI: ffff8b722fc97d00 RDI: ffff8b722fc97d00 RBP: ffff8b5601c00000 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffb642afb476f8 R12: ffffffffffffffff R13: ffffb642afb47974 R14: ffff8b5499254c00 R15: 0000000000000003 FS: 00007f00a06d4080(0000) GS:ffff8b722fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff5cff5ff0 CR3: 00000001c0c2a006 CR4: 00000000001706e0 Call Trace: btrfsic_process_written_block+0x2f7/0x850 [btrfs] __btrfsic_submit_bio.part.19+0x310/0x330 [btrfs] ? bio_associate_blkg_from_css+0xa4/0x2c0 btrfsic_submit_bio+0x18/0x30 [btrfs] write_dev_supers+0x81/0x2a0 [btrfs] ? find_get_pages_range_tag+0x219/0x280 ? pagevec_lookup_range_tag+0x24/0x30 ? __filemap_fdatawait_range+0x6d/0xf0 ? __raw_callee_save___native_queued_spin_unlock+0x11/0x1e ? find_first_extent_bit+0x9b/0x160 [btrfs] ? __raw_callee_save___native_queued_spin_unlock+0x11/0x1e write_all_supers+0x1b3/0xa70 [btrfs] ? __raw_callee_save___native_queued_spin_unlock+0x11/0x1e btrfs_commit_transaction+0x59d/0xac0 [btrfs] close_ctree+0x11d/0x339 [btrfs] generic_shutdown_super+0x71/0x110 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x31/0x70 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 exit_to_user_mode_prepare+0x1f0/0x200 syscall_exit_to_user_mode+0x12/0x30 do_syscall_64+0x46/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f009f711dfb RSP: 002b:00007fff5cff7928 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 000055b68c6c9970 RCX: 00007f009f711dfb RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000055b68c6c9b50 RBP: 0000000000000000 R08: 000055b68c6ca900 R09: 00007f009f795580 R10: 0000000000000000 R11: 0000000000000246 R12: 000055b68c6c9b50 R13: 00007f00a04bf184 R14: 0000000000000000 R15: 00000000ffffffff ---[ end trace 2c4b82abcef9eec4 ]--- S-65536(sdb2/65536/1) --> M-1064960(sdb2/1064960/1) Reviewed-by:
Filipe Manana <fdmanana@gmail.com> Signed-off-by:
Wang Yugui <wangyugui@e16-tech.com> Signed-off-by:
-
Filipe Manana authored
Often some test cases like btrfs/161 trigger lockdep splats that complain about possible unsafe lock scenario due to the fact that during mount, when reading the chunk tree we end up calling blkdev_get_by_path() while holding a read lock on a leaf of the chunk tree. That produces a lockdep splat like the following: [ 3653.683975] ====================================================== [ 3653.685148] WARNING: possible circular locking dependency detected [ 3653.686301] 5.15.0-rc7-btrfs-next-103 #1 Not tainted [ 3653.687239] ------------------------------------------------------ [ 3653.688400] mount/447465 is trying to acquire lock: [ 3653.689320] ffff8c6b0c76e528 (&disk->open_mutex){+.+.}-{3:3}, at: blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.691054] but task is already holding lock: [ 3653.692155] ffff8c6b0a9f39e0 (btrfs-chunk-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 3653.693978] which lock already depends on the new lock. [ 3653.695510] the existing dependency chain (in reverse order) is: [ 3653.696915] -> #3 (btrfs-chunk-00){++++}-{3:3}: [ 3653.698053] down_read_nested+0x4b/0x140 [ 3653.698893] __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 3653.699988] btrfs_read_lock_root_node+0x31/0x40 [btrfs] [ 3653.701205] btrfs_search_slot+0x537/0xc00 [btrfs] [ 3653.702234] btrfs_insert_empty_items+0x32/0x70 [btrfs] [ 3653.703332] btrfs_init_new_device+0x563/0x15b0 [btrfs] [ 3653.704439] btrfs_ioctl+0x2110/0x3530 [btrfs] [ 3653.705405] __x64_sys_ioctl+0x83/0xb0 [ 3653.706215] do_syscall_64+0x3b/0xc0 [ 3653.706990] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.708040] -> #2 (sb_internal#2){.+.+}-{0:0}: [ 3653.708994] lock_release+0x13d/0x4a0 [ 3653.709533] up_write+0x18/0x160 [ 3653.710017] btrfs_sync_file+0x3f3/0x5b0 [btrfs] [ 3653.710699] __loop_update_dio+0xbd/0x170 [loop] [ 3653.711360] lo_ioctl+0x3b1/0x8a0 [loop] [ 3653.711929] block_ioctl+0x48/0x50 [ 3653.712442] __x64_sys_ioctl+0x83/0xb0 [ 3653.712991] do_syscall_64+0x3b/0xc0 [ 3653.713519] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.714233] -> #1 (&lo->lo_mutex){+.+.}-{3:3}: [ 3653.715026] __mutex_lock+0x92/0x900 [ 3653.715648] lo_open+0x28/0x60 [loop] [ 3653.716275] blkdev_get_whole+0x28/0x90 [ 3653.716867] blkdev_get_by_dev.part.0+0x142/0x320 [ 3653.717537] blkdev_open+0x5e/0xa0 [ 3653.718043] do_dentry_open+0x163/0x390 [ 3653.718604] path_openat+0x3f0/0xa80 [ 3653.719128] do_filp_open+0xa9/0x150 [ 3653.719652] do_sys_openat2+0x97/0x160 [ 3653.720197] __x64_sys_openat+0x54/0x90 [ 3653.720766] do_syscall_64+0x3b/0xc0 [ 3653.721285] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.721986] -> #0 (&disk->open_mutex){+.+.}-{3:3}: [ 3653.722775] __lock_acquire+0x130e/0x2210 [ 3653.723348] lock_acquire+0xd7/0x310 [ 3653.723867] __mutex_lock+0x92/0x900 [ 3653.724394] blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.725041] blkdev_get_by_path+0xb8/0xd0 [ 3653.725614] btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs] [ 3653.726332] open_fs_devices+0xd7/0x2c0 [btrfs] [ 3653.726999] btrfs_read_chunk_tree+0x3ad/0x870 [btrfs] [ 3653.727739] open_ctree+0xb8e/0x17bf [btrfs] [ 3653.728384] btrfs_mount_root.cold+0x12/0xde [btrfs] [ 3653.729130] legacy_get_tree+0x30/0x50 [ 3653.729676] vfs_get_tree+0x28/0xc0 [ 3653.730192] vfs_kern_mount.part.0+0x71/0xb0 [ 3653.730800] btrfs_mount+0x11d/0x3a0 [btrfs] [ 3653.731427] legacy_get_tree+0x30/0x50 [ 3653.731970] vfs_get_tree+0x28/0xc0 [ 3653.732486] path_mount+0x2d4/0xbe0 [ 3653.732997] __x64_sys_mount+0x103/0x140 [ 3653.733560] do_syscall_64+0x3b/0xc0 [ 3653.734080] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.734782] other info that might help us debug this: [ 3653.735784] Chain exists of: &disk->open_mutex --> sb_internal#2 --> btrfs-chunk-00 [ 3653.737123] Possible unsafe locking scenario: [ 3653.737865] CPU0 CPU1 [ 3653.738435] ---- ---- [ 3653.739007] lock(btrfs-chunk-00); [ 3653.739449] lock(sb_internal#2); [ 3653.740193] lock(btrfs-chunk-00); [ 3653.740955] lock(&disk->open_mutex); [ 3653.741431] *** DEADLOCK *** [ 3653.742176] 3 locks held by mount/447465: [ 3653.742739] #0: ffff8c6acf85c0e8 (&type->s_umount_key#44/1){+.+.}-{3:3}, at: alloc_super+0xd5/0x3b0 [ 3653.744114] #1: ffffffffc0b28f70 (uuid_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x59/0x870 [btrfs] [ 3653.745563] #2: ffff8c6b0a9f39e0 (btrfs-chunk-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 3653.747066] stack backtrace: [ 3653.747723] CPU: 4 PID: 447465 Comm: mount Not tainted 5.15.0-rc7-btrfs-next-103 #1 [ 3653.748873] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 3653.750592] Call Trace: [ 3653.750967] dump_stack_lvl+0x57/0x72 [ 3653.751526] check_noncircular+0xf3/0x110 [ 3653.752136] ? stack_trace_save+0x4b/0x70 [ 3653.752748] __lock_acquire+0x130e/0x2210 [ 3653.753356] lock_acquire+0xd7/0x310 [ 3653.753898] ? blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.754596] ? lock_is_held_type+0xe8/0x140 [ 3653.755125] ? blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.755729] ? blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.756338] __mutex_lock+0x92/0x900 [ 3653.756794] ? blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.757400] ? do_raw_spin_unlock+0x4b/0xa0 [ 3653.757930] ? _raw_spin_unlock+0x29/0x40 [ 3653.758437] ? bd_prepare_to_claim+0x129/0x150 [ 3653.758999] ? trace_module_get+0x2b/0xd0 [ 3653.759508] ? try_module_get.part.0+0x50/0x80 [ 3653.760072] blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.760661] ? devcgroup_check_permission+0xc1/0x1f0 [ 3653.761288] blkdev_get_by_path+0xb8/0xd0 [ 3653.761797] btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs] [ 3653.762454] open_fs_devices+0xd7/0x2c0 [btrfs] [ 3653.763055] ? clone_fs_devices+0x8f/0x170 [btrfs] [ 3653.763689] btrfs_read_chunk_tree+0x3ad/0x870 [btrfs] [ 3653.764370] ? kvm_sched_clock_read+0x14/0x40 [ 3653.764922] open_ctree+0xb8e/0x17bf [btrfs] [ 3653.765493] ? super_setup_bdi_name+0x79/0xd0 [ 3653.766043] btrfs_mount_root.cold+0x12/0xde [btrfs] [ 3653.766780] ? rcu_read_lock_sched_held+0x3f/0x80 [ 3653.767488] ? kfree+0x1f2/0x3c0 [ 3653.767979] legacy_get_tree+0x30/0x50 [ 3653.768548] vfs_get_tree+0x28/0xc0 [ 3653.769076] vfs_kern_mount.part.0+0x71/0xb0 [ 3653.769718] btrfs_mount+0x11d/0x3a0 [btrfs] [ 3653.770381] ? rcu_read_lock_sched_held+0x3f/0x80 [ 3653.771086] ? kfree+0x1f2/0x3c0 [ 3653.771574] legacy_get_tree+0x30/0x50 [ 3653.772136] vfs_get_tree+0x28/0xc0 [ 3653.772673] path_mount+0x2d4/0xbe0 [ 3653.773201] __x64_sys_mount+0x103/0x140 [ 3653.773793] do_syscall_64+0x3b/0xc0 [ 3653.774333] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.775094] RIP: 0033:0x7f648bc45aaa This happens because through btrfs_read_chunk_tree(), which is called only during mount, ends up acquiring the mutex open_mutex of a block device while holding a read lock on a leaf of the chunk tree while other paths need to acquire other locks before locking extent buffers of the chunk tree. Since at mount time when we call btrfs_read_chunk_tree() we know that we don't have other tasks running in parallel and modifying the chunk tree, we can simply skip locking of chunk tree extent buffers. So do that and move the assertion that checks the fs is not yet mounted to the top block of btrfs_read_chunk_tree(), with a comment before doing it. Signed-off-by: -
Nikolay Borisov authored
Ordered work functions aren't guaranteed to be handled by the same thread which executed the normal work functions. The only way execution between normal/ordered functions is synchronized is via the WORK_DONE_BIT, unfortunately the used bitops don't guarantee any ordering whatsoever. This manifested as seemingly inexplicable crashes on ARM64, where async_chunk::inode is seen as non-null in async_cow_submit which causes submit_compressed_extents to be called and crash occurs because async_chunk::inode suddenly became NULL. The call trace was similar to: pc : submit_compressed_extents+0x38/0x3d0 lr : async_cow_submit+0x50/0xd0 sp : ffff800015d4bc20 <registers omitted for brevity> Call trace: submit_compressed_extents+0x38/0x3d0 async_cow_submit+0x50/0xd0 run_ordered_work+0xc8/0x280 btrfs_work_helper+0x98/0x250 process_one_work+0x1f0/0x4ac worker_thread+0x188/0x504 kthread+0x110/0x114 ret_from_fork+0x10/0x18 Fix this by adding respective barrier calls which ensure that all accesses preceding setting of WORK_DONE_BIT are strictly ordered before setting the flag. At the same time add a read barrier after reading of WORK_DONE_BIT in run_ordered_work which ensures all subsequent loads would be strictly ordered after reading the bit. This in turn ensures are all accesses before WORK_DONE_BIT are going to be strictly ordered before any access that can occur in ordered_func. Reported-by:Chris Murphy <lists@colorremedies.com> Fixes: 08a9ff32 ("btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue") CC: stable@vger.kernel.org # 4.4+ Link: https://bugzilla.redhat.com/show_bug.cgi?id=2011928Reviewed-by:
Chris Murphy <chris@colorremedies.com> Signed-off-by:
-
Qu Wenruo authored
[BUG] The following script can cause btrfs to crash: $ mount -o compress-force=lzo $DEV /mnt $ dd if=/dev/urandom of=/mnt/foo bs=4k count=1 $ sync The call trace looks like this: general protection fault, probably for non-canonical address 0xe04b37fccce3b000: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 164 Comm: kworker/u20:3 Not tainted 5.15.0-rc7-custom+ #4 Workqueue: btrfs-delalloc btrfs_work_helper [btrfs] RIP: 0010:__memcpy+0x12/0x20 Call Trace: lzo_compress_pages+0x236/0x540 [btrfs] btrfs_compress_pages+0xaa/0xf0 [btrfs] compress_file_range+0x431/0x8e0 [btrfs] async_cow_start+0x12/0x30 [btrfs] btrfs_work_helper+0xf6/0x3e0 [btrfs] process_one_work+0x294/0x5d0 worker_thread+0x55/0x3c0 kthread+0x140/0x170 ret_from_fork+0x22/0x30 ---[ end trace 63c3c0f131e61982 ]--- [CAUSE] In lzo_compress_pages(), parameter @out_pages is not only an output parameter (for the number of compressed pages), but also an input parameter, as the upper limit of compressed pages we can utilize. In commit d4088803 ("btrfs: subpage: make lzo_compress_pages() compatible"), the refactoring doesn't take @out_pages as an input, thus completely ignoring the limit. And for compress-force case, we could hit incompressible data that compressed size would go beyond the page limit, and cause the above crash. [FIX] Save @out_pages as @max_nr_page, and pass it to lzo_compress_pages(), and check if we're beyond the limit before accessing the pages. Note: this also fixes crash on 32bit architectures that was suspected to be caused by merge of btrfs patches to 5.16-rc1. Reported in https://lore.kernel.org/all/20211104115001.GU20319@twin.jikos.cz/ . Reported-by:
Omar Sandoval <osandov@fb.com> Fixes: d4088803 ("btrfs: subpage: make lzo_compress_pages() compatible") Reviewed-by:
-
- 29 Oct, 2021 7 commits
-
-
Filipe Manana authored
The root argument passed to check_item_in_log() always matches the root of the given directory, so it can be eliminated. Signed-off-by:
-
Filipe Manana authored
The root argument for tree-log.c:add_link() always matches the root of the given directory and the given inode, so it can eliminated. Signed-off-by:
-
Filipe Manana authored
The root argument passed to btrfs_unlink_inode() and its callee, __btrfs_unlink_inode(), always matches the root of the given directory and the given inode. So remove the argument and make __btrfs_unlink_inode() use the root of the directory. Signed-off-by:
-
Filipe Manana authored
The root argument for drop_one_dir_item() always matches the root of the given directory inode, since each log tree is associated to one and only one subvolume/root, so remove the argument. Signed-off-by:
-
Li Zhang authored
Reported bug: https://github.com/kdave/btrfs-progs/issues/389 There's a problem with scrub reporting aborted status but returning error code 0, on a filesystem with missing and readded device. Roughly these steps: - mkfs -d raid1 dev1 dev2 - fill with data - unmount - make dev1 disappear - mount -o degraded - copy more data - make dev1 appear again Running scrub afterwards reports that the command was aborted, but the system log message says the exit code was 0. It seems that the cause of the error is decrementing fs_devices->missing_devices but not clearing device->dev_state. Every time we umount filesystem, it would call close_ctree, And it would eventually involve btrfs_close_one_device to close the device, but it only decrements fs_devices->missing_devices but does not clear the device BTRFS_DEV_STATE_MISSING bit. Worse, this bug will cause Integer Overflow, because every time umount, fs_devices->missing_devices will decrease. If fs_devices->missing_devices value hit 0, it would overflow. With added debugging: loop1: detected capacity change from 0 to 20971520 BTRFS: device fsid 56ad51f1-5523-463b-8547-c19486c51ebb devid 1 transid 21 /dev/loop1 scanned by systemd-udevd (2311) loop2: detected capacity change from 0 to 20971520 BTRFS: device fsid 56ad51f1-5523-463b-8547-c19486c51ebb devid 2 transid 17 /dev/loop2 scanned by systemd-udevd (2313) BTRFS info (device loop1): flagging fs with big metadata feature BTRFS info (device loop1): allowing degraded mounts BTRFS info (device loop1): using free space tree BTRFS info (device loop1): has skinny extents BTRFS info (device loop1): before clear_missing.00000000f706684d /dev/loop1 0 BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1 BTRFS info (device loop1): flagging fs with big metadata feature BTRFS info (device loop1): allowing degraded mounts BTRFS info (device loop1): using free space tree BTRFS info (device loop1): has skinny extents BTRFS info (device loop1): before clear_missing.00000000f706684d /dev/loop1 0 BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 0 BTRFS info (device loop1): flagging fs with big metadata feature BTRFS info (device loop1): allowing degraded mounts BTRFS info (device loop1): using free space tree BTRFS info (device loop1): has skinny extents BTRFS info (device loop1): before clear_missing.00000000f706684d /dev/loop1 18446744073709551615 BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 18446744073709551615 If fs_devices->missing_devices is 0, next time it would be 18446744073709551615 After apply this patch, the fs_devices->missing_devices seems to be right: $ truncate -s 10g test1 $ truncate -s 10g test2 $ losetup /dev/loop1 test1 $ losetup /dev/loop2 test2 $ mkfs.btrfs -draid1 -mraid1 /dev/loop1 /dev/loop2 -f $ losetup -d /dev/loop2 $ mount -o degraded /dev/loop1 /mnt/1 $ umount /mnt/1 $ mount -o degraded /dev/loop1 /mnt/1 $ umount /mnt/1 $ mount -o degraded /dev/loop1 /mnt/1 $ umount /mnt/1 $ dmesg loop1: detected capacity change from 0 to 20971520 loop2: detected capacity change from 0 to 20971520 BTRFS: device fsid 15aa1203-98d3-4a66-bcae-ca82f629c2cd devid 1 transid 5 /dev/loop1 scanned by mkfs.btrfs (1863) BTRFS: device fsid 15aa1203-98d3-4a66-bcae-ca82f629c2cd devid 2 transid 5 /dev/loop2 scanned by mkfs.btrfs (1863) BTRFS info (device loop1): flagging fs with big metadata feature BTRFS info (device loop1): allowing degraded mounts BTRFS info (device loop1): disk space caching is enabled BTRFS info (device loop1): has skinny extents BTRFS info (device loop1): before clear_missing.00000000975bd577 /dev/loop1 0 BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1 BTRFS info (device loop1): checking UUID tree BTRFS info (device loop1): flagging fs with big metadata feature BTRFS info (device loop1): allowing degraded mounts BTRFS info (device loop1): disk space caching is enabled BTRFS info (device loop1): has skinny extents BTRFS info (device loop1): before clear_missing.00000000975bd577 /dev/loop1 0 BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1 BTRFS info (device loop1): flagging fs with big metadata feature BTRFS info (device loop1): allowing degraded mounts BTRFS info (device loop1): disk space caching is enabled BTRFS info (device loop1): has skinny extents BTRFS info (device loop1): before clear_missing.00000000975bd577 /dev/loop1 0 BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1 CC: stable@vger.kernel.org # 4.19+ Signed-off-by:
Li Zhang <zhanglikernel@gmail.com> Reviewed-by:
-
Anand Jain authored
In open_ctree() in btrfs_check_rw_degradable() [1], we check each block group individually if at least the minimum number of devices is available for that profile. If all the devices are available, then we don't have to check degradable. [1] open_ctree() :: 3559 if (!sb_rdonly(sb) && !btrfs_check_rw_degradable(fs_info, NULL)) { Also before calling btrfs_check_rw_degradable() in open_ctee() at the line number shown below [2] we call btrfs_read_chunk_tree() and down to add_missing_dev() to record number of missing devices. [2] open_ctree() :: 3454 ret = btrfs_read_chunk_tree(fs_info); btrfs_read_chunk_tree() read_one_chunk() / read_one_dev() add_missing_dev() So, check if there is any missing device before btrfs_check_rw_degradable() in open_ctree(). Also, with this the mount command could save ~16ms.[3] in the most common case, that is no device is missing. [3] 1) * 16934.96 us | btrfs_check_rw_degradable [btrfs](); CC: stable@vger.kernel.org # 4.19+ Reviewed-by: -
David Sterba authored
This is preparatory work for send protocol update to version 2 and higher. We have many pending protocol update requests but still don't have the basic protocol rev in place, the first thing that must happen is to do the actual versioning support. The protocol version is u32 and is a new member in the send ioctl struct. Validity of the version field is backed by a new flag bit. Old kernels would fail when a higher version is requested. Version protocol 0 will pick the highest supported version, BTRFS_SEND_STREAM_VERSION, that's also exported in sysfs. The version is still unchanged and will be increased once we have new incompatible commands or stream updates. Reviewed-by:
-
- 26 Oct, 2021 18 commits
-
-
Anand Jain authored
Commit 95ea0486 ("btrfs: allow read-write for 4K sectorsize on 64K page size systems") added write support for 4K sectorsize on a 64K systems. Fix the now stale comments. Reviewed-by:
-
Josef Bacik authored
Christoph pointed out that I'm updating bdev->bd_inode for the device time when we remove block devices from a btrfs file system, however this isn't actually exposed to anything. The inode we want to update is the one that's associated with the path to the device, usually on devtmpfs, so that blkid notices the difference. We still don't want to do the blkdev_open, so use kern_path() to get the path to the given device and do the update time on that inode. Fixes: 8f96a5bf ("btrfs: update the bdev time directly when closing") Reported-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Josef Bacik authored
If you already have an inode and need to update the time on the inode there is no way to do this properly. Export this helper to allow file systems to update time on the inode so the appropriate handler is called, either ->update_time or generic_update_time. Signed-off-by:
-
Omar Sandoval authored
Attempting to defragment a Btrfs file containing a transparent huge page immediately deadlocks with the following stack trace: #0 context_switch (kernel/sched/core.c:4940:2) #1 __schedule (kernel/sched/core.c:6287:8) #2 schedule (kernel/sched/core.c:6366:3) #3 io_schedule (kernel/sched/core.c:8389:2) #4 wait_on_page_bit_common (mm/filemap.c:1356:4) #5 __lock_page (mm/filemap.c:1648:2) #6 lock_page (./include/linux/pagemap.h:625:3) #7 pagecache_get_page (mm/filemap.c:1910:4) #8 find_or_create_page (./include/linux/pagemap.h:420:9) #9 defrag_prepare_one_page (fs/btrfs/ioctl.c:1068:9) #10 defrag_one_range (fs/btrfs/ioctl.c:1326:14) #11 defrag_one_cluster (fs/btrfs/ioctl.c:1421:9) #12 btrfs_defrag_file (fs/btrfs/ioctl.c:1523:9) #13 btrfs_ioctl_defrag (fs/btrfs/ioctl.c:3117:9) #14 btrfs_ioctl (fs/btrfs/ioctl.c:4872:10) #15 vfs_ioctl (fs/ioctl.c:51:10) #16 __do_sys_ioctl (fs/ioctl.c:874:11) #17 __se_sys_ioctl (fs/ioctl.c:860:1) #18 __x64_sys_ioctl (fs/ioctl.c:860:1) #19 do_syscall_x64 (arch/x86/entry/common.c:50:14) #20 do_syscall_64 (arch/x86/entry/common.c:80:7) #21 entry_SYSCALL_64+0x7c/0x15b (arch/x86/entry/entry_64.S:113) A huge page is represented by a compound page, which consists of a struct page for each PAGE_SIZE page within the huge page. The first struct page is the "head page", and the remaining are "tail pages". Defragmentation attempts to lock each page in the range. However, lock_page() on a tail page actually locks the corresponding head page. So, if defragmentation tries to lock more than one struct page in a compound page, it tries to lock the same head page twice and deadlocks with itself. Ideally, we should be able to defragment transparent huge pages. However, THP for filesystems is currently read-only, so a lot of code is not ready to use huge pages for I/O. For now, let's just return ETXTBUSY. This can be reproduced with the following on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y: $ cat create_thp_file.c #include <fcntl.h> #include <stdbool.h> #include <stdio.h> #include <stdint.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> static const char zeroes[1024 * 1024]; static const size_t FILE_SIZE = 2 * 1024 * 1024; int main(int argc, char **argv) { if (argc != 2) { fprintf(stderr, "usage: %s PATH\n", argv[0]); return EXIT_FAILURE; } int fd = creat(argv[1], 0777); if (fd == -1) { perror("creat"); return EXIT_FAILURE; } size_t written = 0; while (written < FILE_SIZE) { ssize_t ret = write(fd, zeroes, sizeof(zeroes) < FILE_SIZE - written ? sizeof(zeroes) : FILE_SIZE - written); if (ret < 0) { perror("write"); return EXIT_FAILURE; } written += ret; } close(fd); fd = open(argv[1], O_RDONLY); if (fd == -1) { perror("open"); return EXIT_FAILURE; } /* * Reserve some address space so that we can align the file mapping to * the huge page size. */ void *placeholder_map = mmap(NULL, FILE_SIZE * 2, PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (placeholder_map == MAP_FAILED) { perror("mmap (placeholder)"); return EXIT_FAILURE; } void *aligned_address = (void *)(((uintptr_t)placeholder_map + FILE_SIZE - 1) & ~(FILE_SIZE - 1)); void *map = mmap(aligned_address, FILE_SIZE, PROT_READ | PROT_EXEC, MAP_SHARED | MAP_FIXED, fd, 0); if (map == MAP_FAILED) { perror("mmap"); return EXIT_FAILURE; } if (madvise(map, FILE_SIZE, MADV_HUGEPAGE) < 0) { perror("madvise"); return EXIT_FAILURE; } char *line = NULL; size_t line_capacity = 0; FILE *smaps_file = fopen("/proc/self/smaps", "r"); if (!smaps_file) { perror("fopen"); return EXIT_FAILURE; } for (;;) { for (size_t off = 0; off < FILE_SIZE; off += 4096) ((volatile char *)map)[off]; ssize_t ret; bool this_mapping = false; while ((ret = getline(&line, &line_capacity, smaps_file)) > 0) { unsigned long start, end, huge; if (sscanf(line, "%lx-%lx", &start, &end) == 2) { this_mapping = (start <= (uintptr_t)map && (uintptr_t)map < end); } else if (this_mapping && sscanf(line, "FilePmdMapped: %ld", &huge) == 1 && huge > 0) { return EXIT_SUCCESS; } } sleep(6); rewind(smaps_file); fflush(smaps_file); } } $ ./create_thp_file huge $ btrfs fi defrag -czstd ./huge Reviewed-by: -
Anand Jain authored
Commit 2efc459d ("sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs out") merged in 5.10 introduced two new functions sysfs_emit() and sysfs_emit_at() which are aware of the PAGE_SIZE limit of the output buffer. Use the above two new functions instead of scnprintf() and snprintf() in various sysfs show(). Reviewed-by:
-
Qu Wenruo authored
It's a common practice to avoid use sizeof(struct btrfs_super_block) (3531), but to use BTRFS_SUPER_INFO_SIZE (4096). The problem is that, sizeof(struct btrfs_super_block) doesn't match BTRFS_SUPER_INFO_SIZE from the very beginning. Furthermore, for all call sites except selftests, we always allocate BTRFS_SUPER_INFO_SIZE space for super block, there isn't any real reason to use the smaller value, and it doesn't really save any space. So let's get rid of such confusing behavior, and unify those two values. This modification also adds a new static_assert() to verify the size, and moves the BTRFS_SUPER_INFO_* macros to the definition of btrfs_super_block for the static_assert(). Reviewed-by:
-
Filipe Manana authored
Update the comments at btrfs_chunk_alloc() and do_chunk_alloc() that describe which cases can lead to a failure to allocate metadata and system space despite having previously reserved space. This adds one more reason that I previously forgot to mention. Reviewed-by:
-
Filipe Manana authored
When a task is doing some modification to the chunk btree and it is not in the context of a chunk allocation or a chunk removal, it can deadlock with another task that is currently allocating a new data or metadata chunk. These contexts are the following: * When relocating a system chunk, when we need to COW the extent buffers that belong to the chunk btree; * When adding a new device (ioctl), where we need to add a new device item to the chunk btree; * When removing a device (ioctl), where we need to remove a device item from the chunk btree; * When resizing a device (ioctl), where we need to update a device item in the chunk btree and may need to relocate a system chunk that lies beyond the new device size when shrinking a device. The problem happens due to a sequence of steps like the following: 1) Task A starts a data or metadata chunk allocation and it locks the chunk mutex; 2) Task B is relocating a system chunk, and when it needs to COW an extent buffer of the chunk btree, it has locked both that extent buffer as well as its parent extent buffer; 3) Since there is not enough available system space, either because none of the existing system block groups have enough free space or because the only one with enough free space is in RO mode due to the relocation, task B triggers a new system chunk allocation. It blocks when trying to acquire the chunk mutex, currently held by task A; 4) Task A enters btrfs_chunk_alloc_add_chunk_item(), in order to insert the new chunk item into the chunk btree and update the existing device items there. But in order to do that, it has to lock the extent buffer that task B locked at step 2, or its parent extent buffer, but task B is waiting on the chunk mutex, which is currently locked by task A, therefore resulting in a deadlock. One example report when the deadlock happens with system chunk relocation: INFO: task kworker/u9:5:546 blocked for more than 143 seconds. Not tainted 5.15.0-rc3+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u9:5 state:D stack:25936 pid: 546 ppid: 2 flags:0x00004000 Workqueue: events_unbound btrfs_async_reclaim_metadata_space Call Trace: context_switch kernel/sched/core.c:4940 [inline] __schedule+0xcd9/0x2530 kernel/sched/core.c:6287 schedule+0xd3/0x270 kernel/sched/core.c:6366 rwsem_down_read_slowpath+0x4ee/0x9d0 kernel/locking/rwsem.c:993 __down_read_common kernel/locking/rwsem.c:1214 [inline] __down_read kernel/locking/rwsem.c:1223 [inline] down_read_nested+0xe6/0x440 kernel/locking/rwsem.c:1590 __btrfs_tree_read_lock+0x31/0x350 fs/btrfs/locking.c:47 btrfs_tree_read_lock fs/btrfs/locking.c:54 [inline] btrfs_read_lock_root_node+0x8a/0x320 fs/btrfs/locking.c:191 btrfs_search_slot_get_root fs/btrfs/ctree.c:1623 [inline] btrfs_search_slot+0x13b4/0x2140 fs/btrfs/ctree.c:1728 btrfs_update_device+0x11f/0x500 fs/btrfs/volumes.c:2794 btrfs_chunk_alloc_add_chunk_item+0x34d/0xea0 fs/btrfs/volumes.c:5504 do_chunk_alloc fs/btrfs/block-group.c:3408 [inline] btrfs_chunk_alloc+0x84d/0xf50 fs/btrfs/block-group.c:3653 flush_space+0x54e/0xd80 fs/btrfs/space-info.c:670 btrfs_async_reclaim_metadata_space+0x396/0xa90 fs/btrfs/space-info.c:953 process_one_work+0x9df/0x16d0 kernel/workqueue.c:2297 worker_thread+0x90/0xed0 kernel/workqueue.c:2444 kthread+0x3e5/0x4d0 kernel/kthread.c:319 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 INFO: task syz-executor:9107 blocked for more than 143 seconds. Not tainted 5.15.0-rc3+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor state:D stack:23200 pid: 9107 ppid: 7792 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:4940 [inline] __schedule+0xcd9/0x2530 kernel/sched/core.c:6287 schedule+0xd3/0x270 kernel/sched/core.c:6366 schedule_preempt_disabled+0xf/0x20 kernel/sched/core.c:6425 __mutex_lock_common kernel/locking/mutex.c:669 [inline] __mutex_lock+0xc96/0x1680 kernel/locking/mutex.c:729 btrfs_chunk_alloc+0x31a/0xf50 fs/btrfs/block-group.c:3631 find_free_extent_update_loop fs/btrfs/extent-tree.c:3986 [inline] find_free_extent+0x25cb/0x3a30 fs/btrfs/extent-tree.c:4335 btrfs_reserve_extent+0x1f1/0x500 fs/btrfs/extent-tree.c:4415 btrfs_alloc_tree_block+0x203/0x1120 fs/btrfs/extent-tree.c:4813 __btrfs_cow_block+0x412/0x1620 fs/btrfs/ctree.c:415 btrfs_cow_block+0x2f6/0x8c0 fs/btrfs/ctree.c:570 btrfs_search_slot+0x1094/0x2140 fs/btrfs/ctree.c:1768 relocate_tree_block fs/btrfs/relocation.c:2694 [inline] relocate_tree_blocks+0xf73/0x1770 fs/btrfs/relocation.c:2757 relocate_block_group+0x47e/0xc70 fs/btrfs/relocation.c:3673 btrfs_relocate_block_group+0x48a/0xc60 fs/btrfs/relocation.c:4070 btrfs_relocate_chunk+0x96/0x280 fs/btrfs/volumes.c:3181 __btrfs_balance fs/btrfs/volumes.c:3911 [inline] btrfs_balance+0x1f03/0x3cd0 fs/btrfs/volumes.c:4301 btrfs_ioctl_balance+0x61e/0x800 fs/btrfs/ioctl.c:4137 btrfs_ioctl+0x39ea/0x7b70 fs/btrfs/ioctl.c:4949 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae So fix this by making sure that whenever we try to modify the chunk btree and we are neither in a chunk allocation context nor in a chunk remove context, we reserve system space before modifying the chunk btree. Reported-by:Hao Sun <sunhao.th@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CACkBjsax51i4mu6C0C3vJqQN3NR_iVuucoeG3U1HXjrgzn5FFQ@mail.gmail.com/ Fixes: 79bd3712 ("btrfs: rework chunk allocation to avoid exhaustion of the system chunk array") CC: stable@vger.kernel.org # 5.14+ Reviewed-by:
-
Johannes Thumshirn authored
Currently auto reclaim of unusable zones reclaims the block-groups in the order they have been added to the reclaim list. Change this to a greedy algorithm by sorting the list so we have the block-groups with the least amount of valid bytes reclaimed first. Note: we can't splice the block groups from reclaim_bgs to let the sort happen outside of the lock. The block groups can be still in use by other parts eg. via bg_list and we must hold unused_bgs_lock while processing them. Signed-off-by:
-
Christoph Hellwig authored
Just use the %pg format specifier in all the debug printks previously using it. Note that both bdevname and the %pg specifier never print a pathname, so the kbasename call wasn't needed to start with. Reviewed-by:
-
Josef Bacik authored
For device removal and replace we call btrfs_find_device_by_devspec, which if we give it a device path and nothing else will call btrfs_get_dev_args_from_path, which opens the block device and reads the super block and then looks up our device based on that. However at this point we're holding the sb write "lock", so reading the block device pulls in the dependency of ->open_mutex, which produces the following lockdep splat ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc2+ #405 Not tainted ------------------------------------------------------ losetup/11576 is trying to acquire lock: ffff9bbe8cded938 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0 but task is already holding lock: ffff9bbe88e4fc68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&lo->lo_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 lo_open+0x28/0x60 [loop] blkdev_get_whole+0x25/0xf0 blkdev_get_by_dev.part.0+0x168/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x161/0x390 path_openat+0x3cc/0xa20 do_filp_open+0x96/0x120 do_sys_openat2+0x7b/0x130 __x64_sys_openat+0x46/0x70 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (&disk->open_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 blkdev_get_by_dev.part.0+0x56/0x3c0 blkdev_get_by_path+0x98/0xa0 btrfs_get_bdev_and_sb+0x1b/0xb0 btrfs_find_device_by_devspec+0x12b/0x1c0 btrfs_rm_device+0x127/0x610 btrfs_ioctl+0x2a31/0x2e70 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#12){.+.+}-{0:0}: lo_write_bvec+0xc2/0x240 [loop] loop_process_work+0x238/0xd00 [loop] process_one_work+0x26b/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: process_one_work+0x245/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 flush_workqueue+0x91/0x5e0 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 1 lock held by losetup/11576: #0: ffff9bbe88e4fc68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] stack backtrace: CPU: 0 PID: 11576 Comm: losetup Not tainted 5.14.0-rc2+ #405 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack_lvl+0x57/0x72 check_noncircular+0xcf/0xf0 ? stack_trace_save+0x3b/0x50 __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 ? flush_workqueue+0x67/0x5e0 ? lockdep_init_map_type+0x47/0x220 flush_workqueue+0x91/0x5e0 ? flush_workqueue+0x67/0x5e0 ? verify_cpu+0xf0/0x100 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] ? blkdev_ioctl+0x8d/0x2a0 block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f31b02404cb Instead what we want to do is populate our device lookup args before we grab any locks, and then pass these args into btrfs_rm_device(). From there we can find the device and do the appropriate removal. Suggested-by: -
Josef Bacik authored
We are going to want to populate our device lookup args outside of any locks and then do the actual device lookup later, so add a helper to do this work and make btrfs_find_device_by_devspec() use this helper for now. Reviewed-by:
-
Josef Bacik authored
We have a lot of device lookup functions that all do something slightly different. Clean this up by adding a struct to hold the different lookup criteria, and then pass this around to btrfs_find_device() so it can do the proper matching based on the lookup criteria. Reviewed-by:
-
Josef Bacik authored
There's a subtle case where if we're removing the seed device from a file system we need to free its private copy of the fs_devices. However we do not need to call close_fs_devices(), because at this point there are no devices left to close as we've closed the last one. The only thing that close_fs_devices() does is decrement ->opened, which should be 1. We want to avoid calling close_fs_devices() here because it has a lockdep_assert_held(&uuid_mutex), and we are going to stop holding the uuid_mutex in this path. So simply decrement the ->opened counter like we should, and then clean up like normal. Also add a comment explaining what we're doing here as I initially removed this code erroneously. Reviewed-by:
-
Anand Jain authored
A bug was was checking a wrong device count before we delete the struct btrfs_fs_devices in btrfs_rm_device(). To avoid future confusion and easy reference add a comment about the various device counts that we have in the struct btrfs_fs_devices. Signed-off-by:
-
Anand Jain authored
For both sprout and seed fsids, btrfs_fs_devices::num_devices provides device count including missing btrfs_fs_devices::open_devices provides device count excluding missing We create a dummy struct btrfs_device for the missing device, so num_devices != open_devices when there is a missing device. In btrfs_rm_devices() we wrongly check for %cur_devices->open_devices before freeing the seed fs_devices. Instead we should check for %cur_devices->num_devices. Signed-off-by:
-
Filipe Manana authored
At replay_dir_deletes(), if find_dir_range() returns an error we break out of the main while loop and then assign a value of 0 (success) to the 'ret' variable, resulting in completely ignoring that an error happened. Fix that by jumping to the 'out' label when find_dir_range() returns an error (negative value). CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Qu Wenruo authored
The member btrfs_bio::logical is only initialized by two call sites: - btrfs_repair_one_sector() No corresponding site to utilize it. - btrfs_submit_direct() The corresponding site to utilize it is btrfs_check_read_dio_bio(). However for btrfs_check_read_dio_bio(), we can grab the file_offset from btrfs_dio_private::file_offset directly. Thus it turns out we don't really need that btrfs_bio::logical member at all. For btrfs_bio, the logical bytenr can be fetched from its bio->bi_iter.bi_sector directly. So let's just remove the member to save 8 bytes for structure btrfs_bio. Signed-off-by:
-
