- 12 Oct, 2012 23 commits
-
-
Eric Dumazet authored
[ Upstream commit bdfc87f7 ] Its possible to setup a bad cbq configuration leading to an infinite loop in cbq_classify() DEV_OUT=eth0 ICMP="match ip protocol 1 0xff" U32="protocol ip u32" DST="match ip dst" tc qdisc add dev $DEV_OUT root handle 1: cbq avpkt 1000 \ bandwidth 100mbit tc class add dev $DEV_OUT parent 1: classid 1:1 cbq \ rate 512kbit allot 1500 prio 5 bounded isolated tc filter add dev $DEV_OUT parent 1: prio 3 $U32 \ $ICMP $DST 192.168.3.234 flowid 1: Reported-by:
Denys Fedoryschenko <denys@visp.net.lb> Tested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikolay Aleksandrov authored
[ Upstream commit e4d1aa40 ] Add a check if pdev->bus->self == NULL (root bus). When attaching a netxen NIC to a VM it can be on the root bus and the guest would crash in netxen_mask_aer_correctable() because of a NULL pointer dereference if CONFIG_PCIEAER is present. Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 0b836ddd ] Commit 36a12119 (netprio_cgroup.h: dont include module.h from other includes) made the following build error on ixp4xx_hss pop up: CC [M] drivers/net/wan/ixp4xx_hss.o drivers/net/wan/ixp4xx_hss.c:1412:20: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1413:25: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1414:21: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1415:19: error: expected ';', ',' or ')' before string constant make[8]: *** [drivers/net/wan/ixp4xx_hss.o] Error 1 This was previously hidden because ixp4xx_hss includes linux/hdlc.h which includes linux/netdevice.h which includes linux/netprio_cgroup.h which used to include linux/module.h. The real issue was actually present since the initial commit that added this driver since it uses macros from linux/module.h without including this file. Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
htbegin authored
[ Upstream commit ffb5ba90 ] chan->count is used by rx channel. If the desc count is not updated by the clean up loop in cpdma_chan_stop, the value written to the rxfree register in cpdma_chan_start will be incorrect. Signed-off-by:
Tao Hou <hotforest@gmail.com> Signed-off-by:
-
Mathias Krause authored
[ Upstream commit ecd79187 ] The current code fails to ensure that the netlink message actually contains as many bytes as the header indicates. If a user creates a new state or updates an existing one but does not supply the bytes for the whole ESN replay window, the kernel copies random heap bytes into the replay bitmap, the ones happen to follow the XFRMA_REPLAY_ESN_VAL netlink attribute. This leads to following issues: 1. The replay window has random bits set confusing the replay handling code later on. 2. A malicious user could use this flaw to leak up to ~3.5kB of heap memory when she has access to the XFRM netlink interface (requires CAP_NET_ADMIN). Known users of the ESN replay window are strongSwan and Steffen's iproute2 patch (<http://patchwork.ozlabs.org/patch/85962/>). The latter uses the interface with a bitmap supplied while the former does not. strongSwan is therefore prone to run into issue 1. To fix both issues without breaking existing userland allow using the XFRMA_REPLAY_ESN_VAL netlink attribute with either an empty bitmap or a fully specified one. For the former case we initialize the in-kernel bitmap with zero, for the latter we copy the user supplied bitmap. For state updates the full bitmap must be supplied. To prevent overflows in the bitmap length calculation the maximum size of bmp_len is limited to 128 by this patch -- resulting in a maximum replay window of 4096 packets. This should be sufficient for all real life scenarios (RFC 4303 recommends a default replay window size of 64). Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Martin Willi <martin@revosec.ch> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Mathias Krause authored
[ Upstream commit e3ac104d ] The ESN replay window was already fully initialized in xfrm_alloc_replay_state_esn(). No need to copy it again. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 1f86840f ] The memory used for the template copy is a local stack variable. As struct xfrm_user_tmpl contains multiple holes added by the compiler for alignment, not initializing the memory will lead to leaking stack bytes to userland. Add an explicit memset(0) to avoid the info leak. Initial version of the patch by Brad Spengler. Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 7b789836 ] The memory reserved to dump the xfrm policy includes multiple padding bytes added by the compiler for alignment (padding bytes in struct xfrm_selector and struct xfrm_userpolicy_info). Add an explicit memset(0) before filling the buffer to avoid the heap info leak. Signed-off-by:
-
Mathias Krause authored
[ Upstream commit f778a636 ] The memory reserved to dump the xfrm state includes the padding bytes of struct xfrm_usersa_info added by the compiler for alignment (7 for amd64, 3 for i386). Add an explicit memset(0) before filling the buffer to avoid the info leak. Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 4c87308b ] copy_to_user_auth() fails to initialize the remainder of alg_name and therefore discloses up to 54 bytes of heap memory via netlink to userland. Use strncpy() instead of strcpy() to fill the trailing bytes of alg_name with null bytes. Signed-off-by:
-
Li RongQing authored
[ Upstream commit 433a1954 ] if xfrm_policy_get_afinfo returns 0, it has already released the read lock, xfrm_policy_put_afinfo should not be called again. Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
Mathias Krause authored
[ Upstream commit c2546372 ] When dump_one_policy() returns an error, e.g. because of a too small buffer to dump the whole xfrm policy, xfrm_policy_netlink() returns NULL instead of an error pointer. But its caller expects an error pointer and therefore continues to operate on a NULL skbuff. Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 864745d2 ] When dump_one_state() returns an error, e.g. because of a too small buffer to dump the whole xfrm state, xfrm_state_netlink() returns NULL instead of an error pointer. But its callers expect an error pointer and therefore continue to operate on a NULL skbuff. This could lead to a privilege escalation (execution of user code in kernel context) if the attacker has CAP_NET_ADMIN and is able to map address 0. Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit 3b59df46 ] ESN for esp is defined in RFC 4303. This RFC assumes that the sequence number counters are always up to date. However, this is not true if an async crypto algorithm is employed. If the sequence number counters are not up to date on sequence number check, we may incorrectly update the upper 32 bit of the sequence number. This leads to a DOS. We workaround this by comparing the upper sequence number, (used for authentication) with the upper sequence number computed after the async processing. We drop the packet if these numbers are different. To do this, we introduce a recheck function that does this check in the ESN case. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tejun Heo authored
commit 959d1af8 upstream. WORK_STRUCT_PENDING is used to claim ownership of a work item and process_one_work() releases it before starting execution. When someone else grabs PENDING, all pre-release updates to the work item should be visible and all updates made by the new owner should happen afterwards. Grabbing PENDING uses test_and_set_bit() and thus has a full barrier; however, clearing doesn't have a matching wmb. Given the preceding spin_unlock and use of clear_bit, I don't believe this can be a problem on an actual machine and there hasn't been any related report but it still is theretically possible for clear_pending to permeate upwards and happen before work->entry update. Add an explicit smp_wmb() before work_clear_pending(). Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Martin Michlmayr authored
commit 0f6d93aa upstream. The ACARD driver calls udelay() with a value > 2000, which leads to to the following compilation error on ARM: ERROR: "__bad_udelay" [drivers/scsi/atp870u.ko] undefined! make[1]: *** [__modpost] Error 1 This is because udelay is defined on ARM, roughly speaking, as #define udelay(n) ((n) > 2000 ? __bad_udelay() : \ __const_udelay((n) * ((2199023U*HZ)>>11))) The argument to __const_udelay is the number of jiffies to wait divided by 4, but this does not work unless the multiplication does not overflow, and that is what the build error is designed to prevent. The intended behavior can be achieved by using mdelay to call udelay multiple times in a loop. [jrnieder@gmail.com: adding context] Signed-off-by:
Martin Michlmayr <tbm@cyrius.com> Signed-off-by:
Jonathan Nieder <jrnieder@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Shawn Guo authored
commit f96972f2 upstream. As kernel_power_off() calls disable_nonboot_cpus(), we may also want to have kernel_restart() call disable_nonboot_cpus(). Doing so can help machines that require boot cpu be the last alive cpu during reboot to survive with kernel restart. This fixes one reboot issue seen on imx6q (Cortex-A9 Quad). The machine requires that the restart routine be run on the primary cpu rather than secondary ones. Otherwise, the secondary core running the restart routine will fail to come to online after reboot. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Davidlohr Bueso authored
commit e9687567 upstream. Account for all properties when a and/or b are 0: gcd(0, 0) = 0 gcd(a, 0) = a gcd(0, b) = b Fixes no known problems in current kernels. Signed-off-by:
Davidlohr Bueso <dave@gnu.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
commit dfb117b3 upstream. Check whether we evaluated _ADR successfully. Previously we ignored failure, so we would have used garbage data from the stack as the device and function number. We return AE_OK so that we ignore only this slot and continue looking for other slots. Found by Coverity (CID 113981). Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> [bwh: Backported to 2.6.32/3.0: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Lin Ming authored
commit fc54ab72 upstream. The _OSC method may exist in module level code, so it must be called after ACPI_FULL_INITIALIZATION On some new platforms with Zero-Power-Optical-Disk-Drive (ZPODD) support, this fix is necessary to save power. Signed-off-by:
Lin Ming <ming.m.lin@intel.com> Tested-by:
Aaron Lu <aaron.lu@intel.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Ben Hutchings authored
commit 4b961180 upstream. ite_dev::rdev is currently initialised in ite_probe() after rc_register_device() returns. If a newly registered device is opened quickly enough, we may enable interrupts and try to use ite_dev::rdev before it has been initialised. Move it up to the earliest point we can, right after calling rc_allocate_device(). Reported-and-tested-by:
YunQiang Su <wzssyqa@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Sascha Hauer authored
commit c353acba upstream. The call if_changed mechanism does not work when the command contains backslashes. This basically is an issue with lzo and bzip2 compressed kernels. The compressed binaries do not contain the uncompressed image size, so these use size_append to append the size. This results in backslashes in the executed command. With this if_changed always detects a change in the command and rebuilds the compressed image even if nothing has changed. Fix this by escaping backslashes in make-cmd Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Jan Luebbe <jlu@pengutronix.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Bernhard Walle <bernhard@bwalle.de> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Geert Uytterhoeven authored
commit 9957423f upstream. It seems the current (gcc 4.6.3) no longer provides this so make it conditional. As reported by Tony before, the mn10300 architecture cross-compiles with gcc-4.6.3 if -mmem-funcs is not added to KBUILD_CFLAGS. Reported-by:
Tony Breeds <tony@bakeyournoodle.com> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by:
-
- 07 Oct, 2012 17 commits
-
-
Greg Kroah-Hartman authored
-
Bart Van Assche authored
commit e47f8976 upstream. A quote from SPC-4: "While in the unavailable primary target port asymmetric access state, the device server shall support those of the following commands that it supports while in the active/optimized state: [ ... ] d) SET TARGET PORT GROUPS; [ ... ]". Hence enable sending STPG to a target port group that is in the unavailable state. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Acked-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Dan Williams authored
commit bc3f02a7 upstream. John reports: BUG: soft lockup - CPU#2 stuck for 23s! [kworker/u:8:2202] [..] Call Trace: [<ffffffff8141782a>] scsi_remove_target+0xda/0x1f0 [<ffffffff81421de5>] sas_rphy_remove+0x55/0x60 [<ffffffff81421e01>] sas_rphy_delete+0x11/0x20 [<ffffffff81421e35>] sas_port_delete+0x25/0x160 [<ffffffff814549a3>] mptsas_del_end_device+0x183/0x270 ...introduced by commit 3b661a92 "[SCSI] fix hot unplug vs async scan race". Don't restart lookup of more stargets in the multi-target case, just arrange to traverse the list once, on the assumption that new targets are always added at the end. There is no guarantee that the target will change state in scsi_target_reap() so we can end up spinning if we restart. Acked-by:
Jack Wang <jack_wang@usish.com> LKML-Reference: <CAEhu1-6wq1YsNiscGMwP4ud0Q+MrViRzv=kcWCQSBNc8c68N5Q@mail.gmail.com> Reported-by:
John Drescher <drescherjm@gmail.com> Tested-by:
Dan Williams <djbw@fb.com> Signed-off-by:
-
Yinghai Lu authored
commit be768912 upstream. git commit c8adf9a3 "PCI: pre-allocate additional resources to devices only after successful allocation of essential resources." fails to take into consideration the optional-resources needed by children devices while calculating the optional-resource needed by the bridge. This can be a problem on some setup. For example, if a hotplug bridge has 8 children hotplug bridges, the bridge should have enough resources to accomodate the hotplug requirements for each of its children hotplug bridges. Currently this is not the case. This patch fixes the problem. Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Reviewed-by:
Ram Pai <linuxram@us.ibm.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Andrew Worsley <amworsley@gmail.com> Signed-off-by:
-
Avi Kivity authored
commit cb09cad4 upstream. Probably a leftover from the early days of self-patching, p6nops are marked __initconst_or_module, which causes them to be discarded in a non-modular kernel. If something later triggers patching, it will overwrite kernel code with garbage. Reported-by:
Tomas Racek <tracek@redhat.com> Signed-off-by:
Avi Kivity <avi@redhat.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: qemu-devel@nongnu.org Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/r/5034AE84.90708@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Ben Jencks <ben@bjencks.net> Signed-off-by:
-
Dan Williams authored
commit 6d70a74f upstream. The oem parameter image embedded in the efi variable is at an offset from the start of the variable. However, in the failure path we try to free the 'orom' pointer which is only valid when the paramaters are being read from the legacy option-rom space. Since failure to load the oem parameters is unlikely and we keep the memory around in the success case just defer all de-allocation to devm. Reported-by:
Don Morris <don.morris@hp.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Bart Van Assche authored
commit d8536670 upstream. We need to call scsi_done() for commands after we abort them. Signed-off-by:
David Dillow <dillowda@ornl.gov> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Bart Van Assche authored
commit 9b796d06 upstream. srp_free_req() uses the scsi_cmnd structure contents to unmap buffers, so we must invoke srp_free_req() before we release ownership of that structure. Signed-off-by:
-
Patrick McHardy authored
commit bea1e22d upstream. Fix a crash in ipoib_mcast_join_task(). (with help from Or Gerlitz) Commit c8c2afe3 ("IPoIB: Use rtnl lock/unlock when changing device flags") added a call to rtnl_lock() in ipoib_mcast_join_task(), which is run from the ipoib_workqueue, and hence the workqueue can't be flushed from the context of ipoib_stop(). In the current code, ipoib_stop() (which doesn't flush the workqueue) calls ipoib_mcast_dev_flush(), which goes and deletes all the multicast entries. This takes place without any synchronization with a possible running instance of ipoib_mcast_join_task() for the same ipoib device, leading to a crash due to NULL pointer dereference. Fix this by making sure that the workqueue is flushed before ipoib_mcast_dev_flush() is called. To make that possible, we move the RTNL-lock wrapped code to ipoib_mcast_join_finish(). Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Wei Yongjun authored
commit f61bd058 upstream. In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Stephen M. Cameron authored
commit 21e89afd upstream. It turns out Smart Array logical drives do not support target reset and when the target reset fails, the logical drive will be taken off line. Symptoms look like this: hpsa 0000:03:00.0: Abort request on C1:B0:T0:L0 hpsa 0000:03:00.0: resetting device 1:0:0:0 hpsa 0000:03:00.0: cp ffff880037c56000 is reported invalid (probably means target device no longer present) hpsa 0000:03:00.0: resetting device failed. sd 1:0:0:0: Device offlined - not ready after error recovery sd 1:0:0:0: rejecting I/O to offline device EXT3-fs error (device sdb1): read_block_bitmap: LUN reset is supported though, and is what we should be using. Target reset is also disruptive in shared SAS situations, for example, an external MSA1210m which does support target reset attached to Smart Arrays in multiple hosts -- a target reset from one host is disruptive to other hosts as all LUNs on the target will be reset and will abort all outstanding i/os back to all the attached hosts. So we should use LUN reset, not target reset. Tested this with Smart Array logical drives and with tape drives. Not sure how this bug survived since 2009, except it must be very rare for a Smart Array to require more than 30s to complete a request. Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 225c5696 upstream. The length field in the host config packet is only 16-bit long, so passing it 0x10000 (64K which is our standard PAGE_SIZE) doesn't work and result in an empty config from the server. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by:
-
Artem Bityutskiy authored
commit abb3e011 upstream. Currently UBI fails in autoresize when it is in R/O mode (e.g., because the underlying MTD device is R/O). This patch fixes the issue - we just skip autoresize and print a warning. Reported-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Russ Gorby authored
commit 88ed2a60 upstream. Uplink (TX) network data will go through gsm_dlci_data_output_framed there is a bug where if memory allocation fails, the skb which has already been pulled off the list will be lost. In addition TX skbs were being processed in LIFO order Fixed the memory leak, and changed to FIFO order processing Signed-off-by:
Russ Gorby <russ.gorby@intel.com> Tested-by:
Kappel, LaurentX <laurentx.kappel@intel.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Michael Spang authored
commit a6e097df upstream. The Intel XHCI specification says that after clearing the run/stop bit the controller may take up to 16ms to halt. We've seen a device take 14ms, which with the current timeout of 10ms causes the kernel to abort the suspend. Increasing the timeout to the recommended value fixes the problem. This patch should be backported to kernels as old as 2.6.37, that contain the commit 5535b1d5 "USB: xHCI: PCI power management implementation". Signed-off-by:
Michael Spang <spang@chromium.org> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Denys Vlasenko authored
commit f34f9d18 upstream. In !CORE_DUMP_USE_REGSET case, if elf_note_info_init fails to allocate memory for info->fields, it frees already allocated stuff and returns error to its caller, fill_note_info. Which in turn returns error to its caller, elf_core_dump. Which jumps to cleanup label and calls free_note_info, which will happily try to free all info->fields again. BOOM. This is the fix. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Denys Vlasenko <vda.linux@googlemail.com> Cc: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by:
-
Russ Gorby authored
commit 5e44708f upstream. There were some locking holes in the management of the MUX's message queue for 2 code paths: 1) gsmld_write_wakeup 2) receipt of CMD_FCON flow-control message In both cases gsm_data_kick is called w/o locking so it can collide with other other instances of gsm_data_kick (pulling messages tx_tail) or potentially other instances of __gsm_data_queu (adding messages to tx_head) Changed to take the tx_lock in these 2 cases Signed-off-by:
Yin, Fengwei <fengwei.yin@intel.com> Signed-off-by:
-
