- 19 Jun, 2015 3 commits
-
-
Srikar Dronamraju authored
When CONFIG_SCHEDSTATS is enabled, /proc/<pid>/sched prints almost all sched statistics except sum_sleep_runtime. Since sum_sleep_runtime is a good info to collect, add this it to /proc/<pid>/sched. Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1433751041-11724-4-git-send-email-srikar@linux.vnet.ibm.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Srikar Dronamraju authored
Within runnable tasks in /proc/sched_debug, vruntime is printed twice, once as tree-key and again as exec-runtime. Since exec-runtime isnt populated in !CONFIG_SCHEDSTATS, use this field to print wait_sum. Signed-off-by:
-
Srikar Dronamraju authored
With !CONFIG_SCHEDSTATS, runnable tasks in /proc/sched_debug has too many columns than required. Fix this by printing appropriate columns. While at this, print sum_exec_runtime, since this information is available even in !CONFIG_SCHEDSTATS case. Signed-off-by:
-
- 07 Jun, 2015 6 commits
-
-
Rik van Riel authored
Changeset a43455a1 ("sched/numa: Ensure task_numa_migrate() checks the preferred node") fixes an issue where workloads would never converge on a fully loaded (or overloaded) system. However, it introduces a regression on less than fully loaded systems, where workloads converge on a few NUMA nodes, instead of properly staying spread out across the whole system. This leads to a reduction in available memory bandwidth, and usable CPU cache, with predictable performance problems. The root cause appears to be an interaction between the load balancer and NUMA balancing, where the short term load represented by the load balancer differs from the long term load the NUMA balancing code would like to base its decisions on. Simply reverting a43455a1 would re-introduce the non-convergence of workloads on fully loaded systems, so that is not a good option. As an aside, the check done before a43455a1 only applied to a task's preferred node, not to other candidate nodes in the system, so the converge-on-too-few-nodes problem still happens, just to a lesser degree. Instead, try to compensate for the impedance mismatch between the load balancer and NUMA balancing by only ever considering a lesser loaded node as a destination for NUMA balancing, regardless of whether the task is trying to move to the preferred node, or to another node. This patch also addresses the issue that a system with a single runnable thread would never migrate that thread to near its memory, introduced by 095bebf6 ("sched/numa: Do not move past the balance point if unbalanced"). A test where the main thread creates a large memory area, and spawns a worker thread to iterate over the memory (placed on another node by select_task_rq_fair), after which the main thread goes to sleep and waits for the worker thread to loop over all the memory now sees the worker thread migrated to where the memory is, instead of having all the memory migrated over like before. Jirka has run a number of performance tests on several systems: single instance SpecJBB 2005 performance is 7-15% higher on a 4 node system, with higher gains on systems with more cores per socket. Multi-instance SpecJBB 2005 (one per node), linpack, and stream see little or no changes with the revert of 095bebf6 and this patch. Reported-by:
Artem Bityutski <dedekind1@gmail.com> Reported-by:
Jirka Hladky <jhladky@redhat.com> Tested-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150528095249.3083ade0@annuminas.surriel.comSigned-off-by:
-
Rik van Riel authored
Commit 095bebf6 ("sched/numa: Do not move past the balance point if unbalanced") broke convergence of workloads with just one runnable thread, by making it impossible for the one runnable thread on the system to move from one NUMA node to another. Instead, the thread would remain where it was, and pull all the memory across to its location, which is much slower than just migrating the thread to where the memory is. The next patch has a better fix for the issue that 095bebf6 tried to address. Reported-by:
-
Ben Segall authored
The optimized task selection logic optimistically selects a new task to run without first doing a full put_prev_task(). This is so that we can avoid a put/set on the common ancestors of the old and new task. Similarly, we should only call check_cfs_rq_runtime() to throttle eligible groups if they're part of the common ancestry, otherwise it is possible to end up with no eligible task in the simple task selection. Imagine: /root /prev /next /A /B If our optimistic selection ends up throttling /next, we goto simple and our put_prev_task() ends up throttling /prev, after which we're going to bug out in set_next_entity() because there aren't any tasks left. Avoid this scenario by only throttling common ancestors. Reported-by:
Mohammed Naser <mnaser@vexxhost.com> Reported-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Ben Segall <bsegall@google.com> [ munged Changelog ] Signed-off-by:
-
Frederic Weisbecker authored
preempt.h has two seperate "#ifdef CONFIG_PREEMPT" sections: one to define preempt_enable() and another to define preempt_enable_notrace(). Lets gather both. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
-
Frederic Weisbecker authored
preempt_schedule_context() is a tracing safe preemption point but it's only used when CONFIG_CONTEXT_TRACKING=y. Other configs have tracing recursion issues since commit: b30f0e3f ("sched/preempt: Optimize preemption operations on __schedule() callers") introduced function based preemp_count_*() ops. Lets make it available on all configs and give it a more appropriate name for its new position. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Frederic Weisbecker authored
Since function tracing disables preemption, it needs a safe preemption point to use when preemption is re-enabled without worrying about tracing recursion. Ie: to avoid tracing recursion, that preemption point can't be traced (use of notrace qualifier) and it can't call any traceable function before that preemption point disables preemption itself, which disarms the recursion. preempt_schedule() was fine until commit: b30f0e3f ("sched/preempt: Optimize preemption operations on __schedule() callers") because PREEMPT_ACTIVE (which has the property to disable preemption and this disarm tracing preemption recursion) was set before calling any further function. But that commit introduced the use of preempt_count_add/sub() functions to set PREEMPT_ACTIVE and because these functions are called before preemption gets a chance to be disabled, we have a tracing recursion. preempt_schedule_context() is one of the possible preemption functions used by tracing. Its special purpose is to avoid tracing recursion against context tracking. Lets enhance this function to become more generally tracing safe by disabling preemption with raw accessors, such that no function is called before preemption gets disabled and disarm the tracing recursion. This function is going to become the specific tracing-safe preemption point in further commit. Reported-by:
-
- 02 Jun, 2015 4 commits
-
-
Ingo Molnar authored
Conflicts: arch/sparc/include/asm/topology_64.h Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Various VTI tunnel (mark handling, PMTU) bug fixes from Alexander Duyck and Steffen Klassert. 2) Revert ethtool PHY query change, it wasn't correct. The PHY address selected by the driver running the PHY to MAC connection decides what PHY address GET ethtool operations return information from. 3) Fix handling of sequence number bits for encryption IV generation in ESP driver, from Herbert Xu. 4) UDP can return -EAGAIN when we hit a bad checksum on receive, even when there are other packets in the receive queue which is wrong. Just respect the error returned from the generic socket recv datagram helper. From Eric Dumazet. 5) Fix BNA driver firmware loading on big-endian systems, from Ivan Vecera. 6) Fix regression in that we were inheriting the congestion control of the listening socket for new connections, the intended behavior always was to use the default in this case. From Neal Cardwell. 7) Fix NULL deref in brcmfmac driver, from Arend van Spriel. 8) OTP parsing fix in iwlwifi from Liad Kaufman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) vti6: Add pmtu handling to vti6_xmit. Revert "net: core: 'ethtool' issue with querying phy settings" bnx2x: Move statistics implementation into semaphores xen: netback: read hotplug script once at start of day. xen: netback: fix printf format string warning Revert "netfilter: ensure number of counters is >0 in do_replace()" net: dsa: Properly propagate errors from dsa_switch_setup_one tcp: fix child sockets to use system default congestion control if not set udp: fix behavior of wrong checksums sfc: free multiple Rx buffers when required bna: fix soft lock-up during firmware initialization failure bna: remove unreasonable iocpf timer start bna: fix firmware loading on big-endian machines bridge: fix br_multicast_query_expired() bug via-rhine: Resigning as maintainer brcmfmac: avoid null pointer access when brcmf_msgbuf_get_pktid() fails mac80211: Fix mac80211.h docbook comments iwlwifi: nvm: fix otp parsing in 8000 hw family iwlwifi: pcie: fix tracking of cmd_in_flight ip_vti/ip6_vti: Preserve skb->mark after rcv_cb call ... -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull Sparc fixes from David Miller: 1) Setup the core/threads/sockets bitmaps correctly so that 'lscpus' and friends operate properly. Frtom Chris Hyser. 2) The bit that normally means "Cached Virtually" on sun4v systems, actually changes meaning in M7 and later chips. Fix from Khalid Aziz. 3) One some PCI-E systems we need to probe different OF properties to fill in the PCI slot information properly, from Eric Snowberg. 4) Kill an extraneous memset after kzalloc(), from Christophe Jaillet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Resolve conflict between sparc v9 and M7 on usage of bit 9 of TTE sparc64: pci slots information is not populated in sysfs sparc: kernel: GRPCI2: Remove a useless memset sparc64: Setup sysfs to mark LDOM sockets, cores and threads correctly -
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fix from Michael Tsirkin: "Last-minute virtio fix for 4.1 This tweaks an exported user-space header to fix build breakage for userspace using it" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: include/uapi/linux/virtio_balloon.h: include linux/virtio_types.h
-
- 01 Jun, 2015 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fix for net The following patch reverts the ebtables chunk that enforces counters that was introduced in the recently applied d26e2c9f ('Revert "netfilter: ensure number of counters is >0 in do_replace()"') since this breaks ebtables. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2015-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi: * fix OTP parsing 8260 * fix powersave handling for 8260 brcmfmac: * fix null pointer crash ==================== Signed-off-by:
-
Steffen Klassert authored
We currently rely on the PMTU discovery of xfrm. However if a packet is localy sent, the PMTU mechanism of xfrm tries to to local socket notification what might not work for applications like ping that don't check for this. So add pmtu handling to vti6_xmit to report MTU changes immediately. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
David S. Miller authored
This reverts commit f96dee13. It isn't right, ethtool is meant to manage one PHY instance per netdevice at a time, and this is selected by the SET command. Therefore by definition the GET command must only return the settings for the configured and selected PHY. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Yuval Mintz authored
Commit dff173de ("bnx2x: Fix statistics locking scheme") changed the bnx2x locking around statistics state into using a mutex - but the lock is being accessed via a timer which is forbidden. [If compiled with CONFIG_DEBUG_MUTEXES, logs show a warning about accessing the mutex in interrupt context] This moves the implementation into using a semaphore [with size '1'] instead. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
-
Ian Campbell authored
When we come to tear things down in netback_remove() and generate the uevent it is possible that the xenstore directory has already been removed (details below). In such cases netback_uevent() won't be able to read the hotplug script and will write a xenstore error node. A recent change to the hypervisor exposed this race such that we now sometimes lose it (where apparently we didn't ever before). Instead read the hotplug script configuration during setup and use it for the lifetime of the backend device. The apparently more obvious fix of moving the transition to state=Closed in netback_remove() to after the uevent does not work because it is possible that we are already in state=Closed (in reaction to the guest having disconnected as it shutdown). Being already in Closed means the toolstack is at liberty to start tearing down the xenstore directories. In principal it might be possible to arrange to unregister the device sooner (e.g on transition to Closing) such that xenstore would still be there but this state machine is fragile and prone to anger... A modern Xen system only relies on the hotplug uevent for driver domains, when the backend is in the same domain as the toolstack it will run the necessary setup/teardown directly in the correct sequence wrt xenstore changes. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Ian Campbell authored
drivers/net/xen-netback/netback.c: In function ‘xenvif_tx_build_gops’: drivers/net/xen-netback/netback.c:1253:8: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=] (txreq.offset&~PAGE_MASK) + txreq.size); ^ PAGE_MASK's type can vary by arch, so a cast is needed. Signed-off-by: -
Bernhard Thaler authored
This partially reverts commit 1086bbe9 ("netfilter: ensure number of counters is >0 in do_replace()") in net/bridge/netfilter/ebtables.c. Setting rules with ebtables does not work any more with 1086bbe9 place. There is an error message and no rules set in the end. e.g. ~# ebtables -t nat -A POSTROUTING --src 12:34:56:78:9a:bc -j DROP Unable to update the kernel. Two possible causes: 1. Multiple ebtables programs were executing simultaneously. The ebtables userspace tool doesn't by default support multiple ebtables programs running Reverting the ebtables part of 1086bbe9 makes this work again. Signed-off-by:
Bernhard Thaler <bernhard.thaler@wvnet.at> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Mikko Rapeli authored
Fixes userspace compilation error: error: unknown type name ‘__virtio16’ __virtio16 tag; Signed-off-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Khalid Aziz authored
sparc: Resolve conflict between sparc v9 and M7 on usage of bit 9 of TTE Bit 9 of TTE is CV (Cacheable in V-cache) on sparc v9 processor while the same bit 9 is MCDE (Memory Corruption Detection Enable) on M7 processor. This creates a conflicting usage of the same bit. Kernel sets TTE.cv bit on all pages for sun4v architecture which works well for sparc v9 but enables memory corruption detection on M7 processor which is not the intent. This patch adds code to determine if kernel is running on M7 processor and takes steps to not enable memory corruption detection in TTE erroneously. Signed-off-by:
Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by:
-
Eric Snowberg authored
Add PCI slot numbers within sysfs for PCIe hardware. Larger PCIe systems with nested PCI bridges and slots further down on these bridges were not being populated within sysfs. This will add ACPI style PCI slot numbers for these systems since the OF 'slot-names' information is not available on all PCIe platforms. Signed-off-by:
Eric Snowberg <eric.snowberg@oracle.com> Reviewed-by:
Bob Picco <bob.picco@oracle.com> Signed-off-by:
-
Christophe Jaillet authored
grpci2priv is allocated using kzalloc, so there is no need to memset it. Signed-off-by:
Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Florian Fainelli authored
While shuffling some code around, dsa_switch_setup_one() was introduced, and it was modified to return either an error code using ERR_PTR() or a NULL pointer when running out of memory or failing to setup a switch. This is a problem for its caler: dsa_switch_setup() which uses IS_ERR() and expects to find an error code, not a NULL pointer, so we still try to proceed with dsa_switch_setup() and operate on invalid memory addresses. This can be easily reproduced by having e.g: the bcm_sf2 driver built-in, but having no such switch, such that drv->setup will fail. Fix this by using PTR_ERR() consistently which is both more informative and avoids for the caller to use IS_ERR_OR_NULL(). Fixes: df197195 ("net: dsa: split dsa_switch_setup into two functions") Reported-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
-
Neal Cardwell authored
Linux 3.17 and earlier are explicitly engineered so that if the app doesn't specifically request a CC module on a listener before the SYN arrives, then the child gets the system default CC when the connection is established. See tcp_init_congestion_control() in 3.17 or earlier, which says "if no choice made yet assign the current value set as default". The change ("net: tcp: assign tcp cong_ops when tcp sk is created") altered these semantics, so that children got their parent listener's congestion control even if the system default had changed after the listener was created. This commit returns to those original semantics from 3.17 and earlier, since they are the original semantics from 2007 in 4d4d3d1e ("[TCP]: Congestion control initialization."), and some Linux congestion control workflows depend on that. In summary, if a listener socket specifically sets TCP_CONGESTION to "x", or the route locks the CC module to "x", then the child gets "x". Otherwise the child gets current system default from net.ipv4.tcp_congestion_control. That's the behavior in 3.17 and earlier, and this commit restores that. Fixes: 55d8694f ("net: tcp: assign tcp cong_ops when tcp sk is created") Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Glenn Judd <glenn.judd@morganstanley.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Eric Dumazet authored
We have two problems in UDP stack related to bogus checksums : 1) We return -EAGAIN to application even if receive queue is not empty. This breaks applications using edge trigger epoll() 2) Under UDP flood, we can loop forever without yielding to other processes, potentially hanging the host, especially on non SMP. This patch is an attempt to make things better. We might in the future add extra support for rt applications wanting to better control time spent doing a recv() in a hostile environment. For example we could validate checksums before queuing packets in socket receive queue. Signed-off-by:
-
Linus Torvalds authored
-
Daniel Pieczko authored
When Rx packet data must be dropped, all the buffers associated with that Rx packet must be freed. Extend and rename efx_free_rx_buffer() to efx_free_rx_buffers() and loop through all the fragments. By doing so this patch fixes a possible memory leak. Signed-off-by:
Shradha Shah <sshah@solarflare.com> Signed-off-by:
-
- 31 May, 2015 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fix from Al Viro: "Off-by-one in d_walk()/__dentry_kill() race fix. It's very hard to hit; possible in the same conditions as the original bug, except that you need the skipped branch to contain all the remaining evictables, so that the d_walk()-calling loop in d_invalidate() decides there's nothing more to do and doesn't go for another pass - otherwise that next pass will sweep the sucker. So it's not too urgent, but seeing that the fix is obvious and the original commit has spread into all -stable branches..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: d_walk() might skip too much
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Three fixes this time around: - fix a memory leak which occurs when probing performance monitoring unit interrupts - fix handling of non-PMD aligned end of RAM causing boot failures - fix missing syscall trace exit path with syscall tracing enabled causing a kernel oops in the audit code" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8357/1: perf: fix memory leak when probing PMU PPIs ARM: fix missing syscall trace exit ARM: 8356/1: mm: handle non-pmd-aligned end of RAM -
git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linuxLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "MIPS fixes for 4.1 all across the tree" * 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux: MIPS: strnlen_user.S: Fix a CPU_DADDI_WORKAROUNDS regression MIPS: BMIPS: Fix bmips_wr_vec() MIPS: ath79: fix build problem if CONFIG_BLK_DEV_INITRD is not set MIPS: Fuloong 2E: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760 MIPS: irq: Use DECLARE_BITMAP ttyFDC: Fix to use native endian MMIO reads MIPS: Fix CDMM to use native endian MMIO reads
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull turbostat tool fixes from Len Brown: "Just one minor kernel dependency in this batch -- added a #define to msr-index.h" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number to 4.7 tools/power turbostat: allow running without cpu0 tools/power turbostat: correctly decode of ENERGY_PERFORMANCE_BIAS tools/power turbostat: enable turbostat to support Knights Landing (KNL) tools/power turbostat: correctly display more than 2 threads/core
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "These are mostly minor fixes, with the exception of the following that address fall-out from recent v4.1-rc1 changes: - regression fix related to the big fabric API registration changes and configfs_depend_item() usage, that required cherry-picking one of HCH's patches from for-next to address the issue for v4.1 code. - remaining TCM-USER -v2 related changes to enforce full CDB passthrough from Andy + Ilias. Also included is a target_core_pscsi driver fix from Andy that addresses a long standing issue with a Scsi_Host reference being leaked on PSCSI device shutdown" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iser-target: Fix error path in isert_create_pi_ctx() target: Use a PASSTHROUGH flag instead of transport_types target: Move passthrough CDB parsing into a common function target/user: Only support full command pass-through target/user: Update example code for new ABI requirements target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystem target: Drop signal_pending checks after interruptible lock acquire target: Add missing parentheses target: Fix bidi command handling target/user: Disallow full passthrough (pass_level=0) ISCSI: fix minor memory leak -
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Some late hwmon patches, all headed for -stable - fix sysfs attribute initialization in nct6775 and nct6683 drivers - do not attempt to auto-detect tmp435 on I2C address 0x37 - ensure iio channel is of type IIO_VOLTAGE in ntc_thermistor driver" * tag 'hwmon-for-linus-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct6683) Add missing sysfs attribute initialization hwmon: (nct6775) Add missing sysfs attribute initialization hwmon: (tmp401) Do not auto-detect chip on I2C address 0x37 hwmon: (ntc_thermistor) Ensure iio channel is of type IIO_VOLTAGE
-
David S. Miller authored
Ivan Vecera says: ==================== bna: misc bugfixes These patches fix several bugs found during device initialization debugging. ==================== Signed-off-by: -
Ivan Vecera authored
Bug in the driver initialization causes soft-lockup if firmware initialization timeout is reached. Polling function bfa_ioc_poll_fwinit() incorrectly calls bfa_nw_iocpf_timeout() when the timeout is reached. The problem is that bfa_nw_iocpf_timeout() calls again bfa_ioc_poll_fwinit()... etc. The bfa_ioc_poll_fwinit() should directly send timeout event for iocpf and the same should be done if firmware download into HW fails. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Ivan Vecera authored
Driver starts iocpf timer prior bnad_ioceth_enable() call and this is unreasonable. This piece of code probably originates from Brocade/Qlogic out-of-box driver during initial import into upstream. This driver uses only one timer and queue to implement multiple timers and this timer is started at this place. The upstream driver uses multiple timers instead of this. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by:
-
Ivan Vecera authored
Firmware required by bna is stored in appropriate files as sequence of LE32 integers. After loading by request_firmware() they need to be byte-swapped on big-endian arches. Without this conversion the NIC is unusable on big-endian machines. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by:
-
