- 05 Sep, 2018 40 commits
-
-
Steve French authored
commit e02789a5 upstream. When enumerating snapshots, the last few bytes of the final snapshot could be left off since we were miscalculating the length returned (leaving off the sizeof struct SRV_SNAPSHOT_ARRAY) See MS-SMB2 section 2.2.32.2. In addition fixup the length used to allow smaller buffer to be passed in, in order to allow returning the size of the whole snapshot array more easily. Sample userspace output with a kernel patched with this (mounted to a Windows volume with two snapshots). Before this patch, the second snapshot would be missing a few bytes at the end. ~/cifs-2.6# ~/enum-snapshots /mnt/file press enter to issue the ioctl to retrieve snapshot information ... size of snapshot array = 102 Num snapshots: 2 Num returned: 2 Array Size: 102 Snapshot 0:@GMT-2018.06.30-19.34.17 Snapshot 1:@GMT-2018.06.30-19.33.37 CC: Stable <stable@vger.kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicholas Mc Guire authored
commit 126c97f4 upstream. The kmalloc was not being checked - if it fails issue a warning and return -ENOMEM to the caller. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: b8da344b ("cifs: dynamic allocation of ntlmssp blob") Signed-off-by:
-
Steve French authored
commit 950132af upstream. /proc/fs/cifs/DebugData displays the features (Kconfig options) used to build cifs.ko but it was missing some, and needed comma separator. These can be useful in debugging certain problems so we know which optional features were enabled in the user's build. Also clarify them, by making them more closely match the corresponding CONFIG_CIFS_* parm. Old format: Features: dfs fscache posix spnego xattr acl New format: Features: DFS,FSCACHE,SMB_DIRECT,STATS,DEBUG2,ALLOW_INSECURE_LEGACY,CIFS_POSIX,UPCALL(SPNEGO),XATTR,ACL Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
Paulo Alcantara <palcantara@suse.de> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Alexander Usyskin authored
commit a103af1b upstream. MEI enables writes of complete messages only while read can be performed in parts, hence write should not update the file offset to not break interleaving partial reads with writes. Cc: <stable@vger.kernel.org> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
jie@chenjie6@huwei.com authored
[ Upstream commit 24eee1e4 ] ioremap_prot() can return NULL which could lead to an oops. Link: http://lkml.kernel.org/r/1533195441-58594-1-git-send-email-chenjie6@huawei.comSigned-off-by:
chen jie <chenjie6@huawei.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Li Zefan <lizefan@huawei.com> Cc: chenjie <chenjie6@huawei.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Jim Gill authored
[ Upstream commit e95153b6 ] Commands that are reset are returned with status SAM_STAT_COMMAND_TERMINATED. PVSCSI currently returns DID_OK | SAM_STAT_COMMAND_TERMINATED which fails the command. Instead, set hostbyte to DID_RESET to allow upper layers to retry. Tested by copying a large file between two pvscsi disks on same adapter while performing a bus reset at 1-second intervals. Before fix, commands sometimes fail with DID_OK. After fix, commands observed to fail with DID_RESET. Signed-off-by:
Jim Gill <jgill@vmware.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Johannes Thumshirn authored
[ Upstream commit 1550ec45 ] When receiving a LOGO request we forget to clear the FC_RP_STARTED flag before starting the rport delete routine. As the started flag was not cleared, we're not deleting the rport but waiting for a restart and thus are keeping the reference count of the rdata object at 1. This leads to the following kmemleak report: unreferenced object 0xffff88006542aa00 (size 512): comm "kworker/0:2", pid 24, jiffies 4294899222 (age 226.880s) hex dump (first 32 bytes): 68 96 fe 65 00 88 ff ff 00 00 00 00 00 00 00 00 h..e............ 01 00 00 00 08 00 00 00 02 c5 45 24 ac b8 00 10 ..........E$.... backtrace: [<(____ptrval____)>] fcoe_ctlr_vn_add.isra.5+0x7f/0x770 [libfcoe] [<(____ptrval____)>] fcoe_ctlr_vn_recv+0x12af/0x27f0 [libfcoe] [<(____ptrval____)>] fcoe_ctlr_recv_work+0xd01/0x32f0 [libfcoe] [<(____ptrval____)>] process_one_work+0x7ff/0x1420 [<(____ptrval____)>] worker_thread+0x87/0xef0 [<(____ptrval____)>] kthread+0x2db/0x390 [<(____ptrval____)>] ret_from_fork+0x35/0x40 [<(____ptrval____)>] 0xffffffffffffffff Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reported-by:
ard <ard@kwaak.net> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Johannes Thumshirn authored
[ Upstream commit 63d0e3df ] Drop the frames in the ELS LOGO error path instead of just returning an error. This fixes the following kmemleak report: unreferenced object 0xffff880064cb1000 (size 424): comm "kworker/0:2", pid 24, jiffies 4294904293 (age 68.504s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<(____ptrval____)>] _fc_frame_alloc+0x2c/0x180 [libfc] [<(____ptrval____)>] fc_lport_enter_logo+0x106/0x360 [libfc] [<(____ptrval____)>] fc_fabric_logoff+0x8c/0xc0 [libfc] [<(____ptrval____)>] fcoe_if_destroy+0x79/0x3b0 [fcoe] [<(____ptrval____)>] fcoe_destroy_work+0xd2/0x170 [fcoe] [<(____ptrval____)>] process_one_work+0x7ff/0x1420 [<(____ptrval____)>] worker_thread+0x87/0xef0 [<(____ptrval____)>] kthread+0x2db/0x390 [<(____ptrval____)>] ret_from_fork+0x35/0x40 [<(____ptrval____)>] 0xffffffffffffffff which can be triggered by issuing echo eth0 > /sys/bus/fcoe/ctlr_destroy Signed-off-by:
-
Johannes Thumshirn authored
[ Upstream commit 2d7d4fd3 ] KASAN reports a use-after-free in fcoe_ctlr_els_send() when we're sending a LOGO and have FIP debugging enabled. This is because we're first freeing the skb and then printing the frame's DID. But the DID is a member of the FC frame header which in turn is the skb's payload. Exchange the debug print and kfree_skb() calls so we're not touching the freed data. Signed-off-by:
-
Benjamin Tissoires authored
[ Upstream commit ca876c74 ] On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Kirill Tkhai authored
[ Upstream commit 7e97de0b ] In case of memcg_online_kmem() failure, memcg_cgroup::id remains hashed in mem_cgroup_idr even after memcg memory is freed. This leads to leak of ID in mem_cgroup_idr. This patch adds removal into mem_cgroup_css_alloc(), which fixes the problem. For better readability, it adds a generic helper which is used in mem_cgroup_alloc() and mem_cgroup_id_put_many() as well. Link: http://lkml.kernel.org/r/152354470916.22460.14397070748001974638.stgit@localhost.localdomain Fixes 73f576c0 ("mm: memcontrol: fix cgroup creation failure after many small jobs") Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit afb41bb0 ] Current value for a target abort error is 0x010, however, this value should in fact be 0x002. As it stands, the range of error is 0..7 so it is currently never being detected. This bug has been in the driver since the early 2.6.12 days (or before). Detected by CoverityScan, CID#744290 ("Logically dead code") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Phillip Lougher authored
[ Upstream commit a3f94cb9 ] Previously in squashfs_readpage() when copying data into the page cache, it used the length of the datablock read from the filesystem (after decompression). However, if the filesystem has been corrupted this data block may be short, which will leave pages unfilled. The fix for this is to compute the expected number of bytes to copy from the inode size, and use this to detect if the block is short. Signed-off-by:
Phillip Lougher <phillip@squashfs.org.uk> Tested-by:
Willy Tarreau <w@1wt.eu> Cc: Анатолий Тросиненко <anatoly.trosinenko@gmail.com> Signed-off-by:
-
Hugh Dickins authored
[ Upstream commit 53406ed1 ] Delete the old VM_BUG_ON_VMA() from zap_pmd_range(), which asserted that mmap_sem must be held when splitting an "anonymous" vma there. Whether that's still strictly true nowadays is not entirely clear, but the danger of sometimes crashing on the BUG is now fairly clear. Even with the new stricter rules for anonymous vma marking, the condition it checks for can possible trigger. Commit 44960f2a ("staging: ashmem: Fix SIGBUS crash when traversing mmaped ashmem pages") is good, and originally I thought it was safe from that VM_BUG_ON_VMA(), because the /dev/ashmem fd exposed to the user is disconnected from the vm_file in the vma, and madvise(,,MADV_REMOVE) insists on VM_SHARED. But after I read John's earlier mail, drawing attention to the vfs_fallocate() in there: I may be wrong, and I don't know if Android has THP in the config anyway, but it looks to me like an unmap_mapping_range() from ashmem's vfs_fallocate() could hit precisely the VM_BUG_ON_VMA(), once it's vma_is_anonymous(). Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Linus Torvalds authored
[ Upstream commit cdbb65c4 ] Anatoly continues to find issues with fuzzed squashfs images. This time, corrupt, missing, or undersized data for the page filling wasn't checked for, because the squashfs_{copy,read}_cache() functions did the squashfs_copy_data() call without checking the resulting data size. Which could result in the page cache pages being incompletely filled in, and no error indication to the user space reading garbage data. So make a helper function for the "fill in pages" case, because the exact same incomplete sequence existed in two places. [ I should have made a squashfs branch for these things, but I didn't intend to start doing them in the first place. My historical connection through cramfs is why I got into looking at these issues at all, and every time I (continue to) think it's a one-off. Because _this_ time is always the last time. Right? - Linus ] Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Tested-by:
-
Govindarajulu Varadarajan authored
[ Upstream commit cb5c6568 ] In commit ab123fe0 ("enic: handle mtu change for vf properly") ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being called without rtnl held. enic_probe() calls enic_change_mtu() without rtnl held. At this point netdev is not registered yet. Remove call to enic_change_mtu and assign the mtu to netdev->mtu. Fixes: ab123fe0 ("enic: handle mtu change for vf properly") Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit 12be1036 ] This is necessary to be able to include <linux/msi.h> when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled. Without this, a build with CONFIG_GENERIC_MSI_IRQ_DOMAIN fails with: In file included from drivers//ata/ahci.c:45:0: >> include/linux/msi.h:226:10: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? msi_alloc_info_t *arg); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:230:9: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? msi_alloc_info_t *arg); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:239:12: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? msi_alloc_info_t *arg); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:240:22: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? void (*msi_finish)(msi_alloc_info_t *arg, int retval); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:241:20: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? void (*set_desc)(msi_alloc_info_t *arg, ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:316:18: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? int nvec, msi_alloc_info_t *args); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:318:29: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? int virq, int nvec, msi_alloc_info_t *args); ^~~~~~~~~~~~~~~~ sg_alloc_fn Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
[ Upstream commit 6f57ed68 ] Code that was added to force gcc not to inline any function that isn't explicitly declared as inline uncovered that init_tick_ops() isn't marked as "__init". It is only called by __init functions and more importantly it too calls an __init function which would require it to be __init as well. Link: http://lkml.kernel.org/r/201806060444.hdHcKOBy%fengguang.wu@intel.comReported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit ec837d62 ] Fix type warnings in arch/arc/mm/cache.c. ../arch/arc/mm/cache.c: In function 'flush_anon_page': ../arch/arc/mm/cache.c:1062:55: warning: passing argument 2 of '__flush_dcache_page' makes integer from pointer without a cast [-Wint-conversion] __flush_dcache_page((phys_addr_t)page_address(page), page_address(page)); ^~~~~~~~~~~~~~~~~~ ../arch/arc/mm/cache.c:1013:59: note: expected 'long unsigned int' but argument is of type 'void *' void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr) ~~~~~~~~~~~~~~^~~~~ Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: Elad Kanfi <eladkan@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Ofer Levi <oferle@mellanox.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 2423665e ] Fix build errors in arch/arc/'s delay.h: - add "extern unsigned long loops_per_jiffy;" - add <asm-generic/types.h> for "u64" In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32: ../arch/arc/include/asm/delay.h: In function '__udelay': ../arch/arc/include/asm/delay.h:61:12: error: 'u64' undeclared (first use in this function) loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32; ^~~ In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32: ../arch/arc/include/asm/delay.h: In function '__udelay': ../arch/arc/include/asm/delay.h:63:37: error: 'loops_per_jiffy' undeclared (first use in this function) loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32; ^~~~~~~~~~~~~~~ Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 9e2ea405 ] Fix printk format warning in arch/arc/plat-eznps/mtm.c: In file included from ../include/linux/printk.h:7, from ../include/linux/kernel.h:14, from ../include/linux/list.h:9, from ../include/linux/smp.h:12, from ../arch/arc/plat-eznps/mtm.c:17: ../arch/arc/plat-eznps/mtm.c: In function 'set_mtm_hs_ctr': ../include/linux/kern_levels.h:5:18: warning: format '%d' expects argument of type 'int', but argument 2 has type 'long int' [-Wformat=] #define KERN_SOH "\001" /* ASCII Start Of Header */ ^~~~~~ ../include/linux/kern_levels.h:11:18: note: in expansion of macro 'KERN_SOH' #define KERN_ERR KERN_SOH "3" /* error conditions */ ^~~~~~~~ ../include/linux/printk.h:308:9: note: in expansion of macro 'KERN_ERR' printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~ ../arch/arc/plat-eznps/mtm.c:166:3: note: in expansion of macro 'pr_err' pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n", ^~~~~~ ../arch/arc/plat-eznps/mtm.c:166:40: note: format string is defined here pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n", ~^ %ld The hs_ctr variable can just be int instead of long, so also change kstrtol() to kstrtoint() and leave the format string as %d. Also add 2 header files since they are used in mtm.c and we prefer not to depend on accidental/indirect #includes. Cc: linux-snps-arc@lists.infradead.org Cc: Ofer Levi <oferle@mellanox.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit b1f32ce1 ] Add <linux/types.h> to fix build errors. Both ctop.h and <soc/nps/common.h> use u32 types and cause many errors. Examples: ../include/soc/nps/common.h:71:4: error: unknown type name 'u32' u32 __reserved:20, cluster:4, core:4, thread:4; ../include/soc/nps/common.h:76:3: error: unknown type name 'u32' u32 value; ../include/soc/nps/common.h:124:4: error: unknown type name 'u32' u32 base:8, cl_x:4, cl_y:4, ../include/soc/nps/common.h:127:3: error: unknown type name 'u32' u32 value; ../arch/arc/plat-eznps/include/plat/ctop.h:83:4: error: unknown type name 'u32' u32 gen:1, gdis:1, clk_gate_dis:1, asb:1, ../arch/arc/plat-eznps/include/plat/ctop.h:86:3: error: unknown type name 'u32' u32 value; ../arch/arc/plat-eznps/include/plat/ctop.h:93:4: error: unknown type name 'u32' u32 csa:22, dmsid:6, __reserved:3, cs:1; ../arch/arc/plat-eznps/include/plat/ctop.h:95:3: error: unknown type name 'u32' u32 value; Cc: linux-snps-arc@lists.infradead.org Cc: Ofer Levi <oferle@mellanox.com> Reviewed-by:
-
Ofer Levi authored
[ Upstream commit 05b466bf ] Fixing compilation issue caused by missing struct nps_host_reg_aux_dpc definition. Fixes: 3f9cd874 ("ARC: [plat-eznps] avoid toggling of DPC register") Reported-by:
Ofer Levi <oferle@mellanox.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
[ Upstream commit ab123fe0 ] When driver gets notification for mtu change, driver does not handle it for all RQs. It handles only RQ[0]. Fix is to use enic_change_mtu() interface to change mtu for vf. Signed-off-by:
-
John Hurley authored
[ Upstream commit ee614c87 ] Function nfp_flower_repr_get_type_and_port expects an enum nfp_repr_type return value but, if the repr type is unknown, returns a value of type enum nfp_flower_cmsg_port_type. This means that if FW encodes the port ID in a way the driver does not understand instead of dropping the frame driver may attribute it to a physical port (uplink) provided the port number is less than physical port count. Fix this and ensure a net_device of NULL is returned if the repr can not be determined. Fixes: 1025351a ("nfp: add flower app") Signed-off-by:
John Hurley <john.hurley@netronome.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 71eb5255 ] bpf_parse_prog() is protected by rcu_read_lock(). so that GFP_KERNEL is not allowed in the bpf_parse_prog(). [51015.579396] ============================= [51015.579418] WARNING: suspicious RCU usage [51015.579444] 4.18.0-rc6+ #208 Not tainted [51015.579464] ----------------------------- [51015.579488] ./include/linux/rcupdate.h:303 Illegal context switch in RCU read-side critical section! [51015.579510] other info that might help us debug this: [51015.579532] rcu_scheduler_active = 2, debug_locks = 1 [51015.579556] 2 locks held by ip/1861: [51015.579577] #0: 00000000a8c12fd1 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x2e0/0x910 [51015.579711] #1: 00000000bf815f8e (rcu_read_lock){....}, at: lwtunnel_build_state+0x96/0x390 [51015.579842] stack backtrace: [51015.579869] CPU: 0 PID: 1861 Comm: ip Not tainted 4.18.0-rc6+ #208 [51015.579891] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [51015.579911] Call Trace: [51015.579950] dump_stack+0x74/0xbb [51015.580000] ___might_sleep+0x16b/0x3a0 [51015.580047] __kmalloc_track_caller+0x220/0x380 [51015.580077] kmemdup+0x1c/0x40 [51015.580077] bpf_parse_prog+0x10e/0x230 [51015.580164] ? kasan_kmalloc+0xa0/0xd0 [51015.580164] ? bpf_destroy_state+0x30/0x30 [51015.580164] ? bpf_build_state+0xe2/0x3e0 [51015.580164] bpf_build_state+0x1bb/0x3e0 [51015.580164] ? bpf_parse_prog+0x230/0x230 [51015.580164] ? lock_is_held_type+0x123/0x1a0 [51015.580164] lwtunnel_build_state+0x1aa/0x390 [51015.580164] fib_create_info+0x1579/0x33d0 [51015.580164] ? sched_clock_local+0xe2/0x150 [51015.580164] ? fib_info_update_nh_saddr+0x1f0/0x1f0 [51015.580164] ? sched_clock_local+0xe2/0x150 [51015.580164] fib_table_insert+0x201/0x1990 [51015.580164] ? lock_downgrade+0x610/0x610 [51015.580164] ? fib_table_lookup+0x1920/0x1920 [51015.580164] ? lwtunnel_valid_encap_type.part.6+0xcb/0x3a0 [51015.580164] ? rtm_to_fib_config+0x637/0xbd0 [51015.580164] inet_rtm_newroute+0xed/0x1b0 [51015.580164] ? rtm_to_fib_config+0xbd0/0xbd0 [51015.580164] rtnetlink_rcv_msg+0x331/0x910 [ ... ] Fixes: 3a0af8fd ("bpf: BPF for lightweight tunnel infrastructure") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Eugeniy Paltsev authored
[ Upstream commit eb277739 ] As for today we don't setup SMP_CACHE_BYTES and cache_line_size for ARC, so they are set to L1_CACHE_BYTES by default. L1 line length (L1_CACHE_BYTES) might be easily smaller than L2 line (which is usually the case BTW). This breaks code. For example this breaks ethernet infrastructure on HSDK/AXS103 boards with IOC disabled, involving manual cache flushes Functions which alloc and manage sk_buff packet data area rely on SMP_CACHE_BYTES define. In the result we can share last L2 cache line in sk_buff linear packet data area between DMA buffer and some useful data in other structure. So we can lose this data when we invalidate DMA buffer. sk_buff linear packet data area | | | skb->end skb->tail V | | V V ----------------------------------------------. packet data | <tail padding> | <useful data in other struct> ----------------------------------------------. ---------------------.--------------------------------------------------. SLC line | SLC (L2 cache) line (128B) | ---------------------.--------------------------------------------------. ^ ^ | | These cache lines will be invalidated when we invalidate skb linear packet data area before DMA transaction starting. This leads to issues painful to debug as it reproduces only if (sk_buff->end - sk_buff->tail) < SLC_LINE_SIZE and if we have some useful data right after sk_buff->end. Fix that by hardcode SMP_CACHE_BYTES to max line length we may have. Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Rafał Miłecki authored
[ Upstream commit d5ea019f ] This reverts commit 2a027b47 ("MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"). Enabling ExternalSync caused a regression for BCM4718A1 (used e.g. in Netgear E3000 and ASUS RT-N16): it simply hangs during PCIe initialization. It's likely that BCM4717A1 is also affected. I didn't notice that earlier as the only BCM47XX devices with PCIe I own are: 1) BCM4706 with 2 x 14e4:4331 2) BCM4706 with 14e4:4360 and 14e4:4331 it appears that BCM4706 is unaffected. While BCM5300X-ES300-RDS.pdf seems to document that erratum and its workarounds (according to quotes provided by Tokunori) it seems not even Broadcom follows them. According to the provided info Broadcom should define CONF7_ES in their SDK's mipsinc.h and implement workaround in the si_mips_init(). Checking both didn't reveal such code. It *could* mean Broadcom also had some problems with the given workaround. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Paul Burton <paul.burton@mips.com> Reported-by:
Michael Marley <michael@michaelmarley.com> Patchwork: https://patchwork.linux-mips.org/patch/20032/ URL: https://bugs.openwrt.org/index.php?do=details&task_id=1688 Cc: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by:
-
Calvin Walton authored
[ Upstream commit 5aa3d1a2 ] This fixes the reported family on modern AMD processors (e.g. Ryzen, which is family 0x17). Previously these processors all showed up as family 0xf. See the document https://support.amd.com/TechDocs/56255_OSRR.pdf section CPUID_Fn00000001_EAX for how to calculate the family from the BaseFamily and ExtFamily values. This matches the code in arch/x86/lib/cpu.c Signed-off-by:
Calvin Walton <calvin.walton@kepstin.ca> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Li Wang authored
[ Upstream commit 16e536ef ] /sys/../zswap/stored_pages keeps rising in a zswap test with "zswap.max_pool_percent=0" parameter. But it should not compress or store pages any more since there is no space in the compressed pool. Reproduce steps: 1. Boot kernel with "zswap.enabled=1" 2. Set the max_pool_percent to 0 # echo 0 > /sys/module/zswap/parameters/max_pool_percent 3. Do memory stress test to see if some pages have been compressed # stress --vm 1 --vm-bytes $mem_available"M" --timeout 60s 4. Watching the 'stored_pages' number increasing or not The root cause is: When zswap_max_pool_percent is set to 0 via kernel parameter, zswap_is_full() will always return true due to zswap_shrink(). But if the shinking is able to reclain a page successfully the code then proceeds to compressing/storing another page, so the value of stored_pages will keep changing. To solve the issue, this patch adds a zswap_is_full() check again after zswap_shrink() to make sure it's now under the max_pool_percent, and to not compress/store if we reached the limit. Link: http://lkml.kernel.org/r/20180530103936.17812-1-liwang@redhat.comSigned-off-by:
Li Wang <liwang@redhat.com> Acked-by:
Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjenning@redhat.com> Cc: Huang Ying <huang.ying.caritas@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by:
-
Davidlohr Bueso authored
[ Upstream commit f075faa3 ] In order for load/store tearing prevention to work, _all_ accesses to the variable in question need to be done around READ and WRITE_ONCE() macros. Ensure everyone does so for q->status variable for semtimedop(). Link: http://lkml.kernel.org/r/20180717052654.676-1-dave@stgolabs.netSigned-off-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
dann frazier authored
[ Upstream commit 7856e861 ] Otherwise interfaces get exposed under /sys/devices/virtual, which doesn't give udev the context it needs for PCI-based predictable interface names. Signed-off-by:
dann frazier <dann.frazier@canonical.com> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 82f4f3e6 ] Add a testcase for checking snapshot and tracing_on relationship. This ensures that the snapshotting doesn't affect current tracing on/off settings. Link: http://lkml.kernel.org/r/153149932412.11274.15289227592627901488.stgit@devbox Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by:
-
Kiran Kumar Modukuri authored
[ Upstream commit c2412ac4 ] If we meet a conflicting object that is marked FSCACHE_OBJECT_IS_LIVE in the active object tree, we have been emitting a BUG after logging information about it and the new object. Instead, we should wait for the CACHEFILES_OBJECT_ACTIVE flag to be cleared on the old object (or return an error). The ACTIVE flag should be cleared after it has been removed from the active object tree. A timeout of 60s is used in the wait, so we shouldn't be able to get stuck there. Fixes: 9ae326a6 ("CacheFiles: A cache that backs onto a mounted filesystem") Signed-off-by:
Kiran Kumar Modukuri <kiran.modukuri@gmail.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Kiran Kumar Modukuri authored
[ Upstream commit 934140ab ] cachefiles_read_waiter() has the right to access a 'monitor' object by virtue of being called under the waitqueue lock for one of the pages in its purview. However, it has no ref on that monitor object or on the associated operation. What it is allowed to do is to move the monitor object to the operation's to_do list, but once it drops the work_lock, it's actually no longer permitted to access that object. However, it is trying to enqueue the retrieval operation for processing - but it can only do this via a pointer in the monitor object, something it shouldn't be doing. If it doesn't enqueue the operation, the operation may not get processed. If the order is flipped so that the enqueue is first, then it's possible for the work processor to look at the to_do list before the monitor is enqueued upon it. Fix this by getting a ref on the operation so that we can trust that it will still be there once we've added the monitor to the to_do list and dropped the work_lock. The op can then be enqueued after the lock is dropped. The bug can manifest in one of a couple of ways. The first manifestation looks like: FS-Cache: FS-Cache: Assertion failed FS-Cache: 6 == 5 is false ------------[ cut here ]------------ kernel BUG at fs/fscache/operation.c:494! RIP: 0010:fscache_put_operation+0x1e3/0x1f0 ... fscache_op_work_func+0x26/0x50 process_one_work+0x131/0x290 worker_thread+0x45/0x360 kthread+0xf8/0x130 ? create_worker+0x190/0x190 ? kthread_cancel_work_sync+0x10/0x10 ret_from_fork+0x1f/0x30 This is due to the operation being in the DEAD state (6) rather than INITIALISED, COMPLETE or CANCELLED (5) because it's already passed through fscache_put_operation(). The bug can also manifest like the following: kernel BUG at fs/fscache/operation.c:69! ... [exception RIP: fscache_enqueue_operation+246] ... #7 [ffff883fff083c10] fscache_enqueue_operation at ffffffffa0b793c6 #8 [ffff883fff083c28] cachefiles_read_waiter at ffffffffa0b15a48 #9 [ffff883fff083c48] __wake_up_common at ffffffff810af028 I'm not entirely certain as to which is line 69 in Lei's kernel, so I'm not entirely clear which assertion failed. Fixes: 9ae326a6 ("CacheFiles: A cache that backs onto a mounted filesystem") Reported-by:
Lei Xue <carmark.dlut@gmail.com> Reported-by:
Vegard Nossum <vegard.nossum@gmail.com> Reported-by:
Anthony DeRobertis <aderobertis@metrics.net> Reported-by:
NeilBrown <neilb@suse.com> Reported-by:
Daniel Axtens <dja@axtens.net> Reported-by:
-
Kiran Kumar Modukuri authored
[ Upstream commit d0eb06af ] Alter the state-check assertion in fscache_enqueue_operation() to allow cancelled operations to be given processing time so they can be cleaned up. Also fix a debugging statement that was requiring such operations to have an object assigned. Fixes: 9ae326a6 ("CacheFiles: A cache that backs onto a mounted filesystem") Reported-by:
-
Kees Cook authored
[ Upstream commit 92a47286 ] Dirk Gouders reported that two consecutive "make" invocations on an already compiled tree will show alternating behaviors: $ make CALL scripts/checksyscalls.sh DESCEND objtool CHK include/generated/compile.h DATAREL arch/x86/boot/compressed/vmlinux Kernel: arch/x86/boot/bzImage is ready (#48) Building modules, stage 2. MODPOST 165 modules $ make CALL scripts/checksyscalls.sh DESCEND objtool CHK include/generated/compile.h LD arch/x86/boot/compressed/vmlinux ZOFFSET arch/x86/boot/zoffset.h AS arch/x86/boot/header.o LD arch/x86/boot/setup.elf OBJCOPY arch/x86/boot/setup.bin OBJCOPY arch/x86/boot/vmlinux.bin BUILD arch/x86/boot/bzImage Setup is 15644 bytes (padded to 15872 bytes). System is 6663 kB CRC 3eb90f40 Kernel: arch/x86/boot/bzImage is ready (#48) Building modules, stage 2. MODPOST 165 modules He bisected it back to: commit 98f78525 ("x86/boot: Refuse to build with data relocations") The root cause was the use of the "if_changed" kbuild function multiple times for the same target. It was designed to only be used once per target, otherwise it will effectively always trigger, flipping back and forth between the two commands getting recorded by "if_changed". Instead, this patch merges the two commands into a single function to get stable build artifacts (i.e. .vmlinux.cmd), and a single build behavior. Bisected-and-Reported-by:
Dirk Gouders <dirk@gouders.net> Fix-Suggested-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Hailong Liu authored
[ Upstream commit f3d133ee ] NO_RT_RUNTIME_SHARE feature is used to prevent a CPU borrow enough runtime with a spin-rt-task. However, if RT_RUNTIME_SHARE feature is enabled and rt_rq has borrowd enough rt_runtime at the beginning, rt_runtime can't be restored to its initial bandwidth rt_runtime after we disable RT_RUNTIME_SHARE. E.g. on my PC with 4 cores, procedure to reproduce: 1) Make sure RT_RUNTIME_SHARE is enabled cat /sys/kernel/debug/sched_features GENTLE_FAIR_SLEEPERS START_DEBIT NO_NEXT_BUDDY LAST_BUDDY CACHE_HOT_BUDDY WAKEUP_PREEMPTION NO_HRTICK NO_DOUBLE_TICK LB_BIAS NONTASK_CAPACITY TTWU_QUEUE NO_SIS_AVG_CPU SIS_PROP NO_WARN_DOUBLE_CLOCK RT_PUSH_IPI RT_RUNTIME_SHARE NO_LB_MIN ATTACH_AGE_LOAD WA_IDLE WA_WEIGHT WA_BIAS 2) Start a spin-rt-task ./loop_rr & 3) set affinity to the last cpu taskset -p 8 $pid_of_loop_rr 4) Observe that last cpu have borrowed enough runtime. cat /proc/sched_debug | grep rt_runtime .rt_runtime : 950.000000 .rt_runtime : 900.000000 .rt_runtime : 950.000000 .rt_runtime : 1000.000000 5) Disable RT_RUNTIME_SHARE echo NO_RT_RUNTIME_SHARE > /sys/kernel/debug/sched_features 6) Observe that rt_runtime can not been restored cat /proc/sched_debug | grep rt_runtime .rt_runtime : 950.000000 .rt_runtime : 900.000000 .rt_runtime : 950.000000 .rt_runtime : 1000.000000 This patch help to restore rt_runtime after we disable RT_RUNTIME_SHARE. Signed-off-by:
Hailong Liu <liu.hailong6@zte.com.cn> Signed-off-by:
Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/1531874815-39357-1-git-send-email-liu.hailong6@zte.com.cnSigned-off-by:
-
Peter Rosin authored
[ Upstream commit 7b94ea50 ] If an i2c topology has instances of nested muxes, then a lockdep splat is produced when when i2c_parent_lock_bus() is called. Here is an example: ============================================ WARNING: possible recursive locking detected -------------------------------------------- insmod/68159 is trying to acquire lock: (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux] but task is already holding lock: (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(i2c_register_adapter#2); lock(i2c_register_adapter#2); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by insmod/68159: #0: (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux] stack backtrace: CPU: 13 PID: 68159 Comm: insmod Tainted: G O Call Trace: dump_stack+0x67/0x98 __lock_acquire+0x162e/0x1780 lock_acquire+0xba/0x200 rt_mutex_lock+0x44/0x60 i2c_parent_lock_bus+0x32/0x50 [i2c_mux] i2c_parent_lock_bus+0x3e/0x50 [i2c_mux] i2c_smbus_xfer+0xf0/0x700 i2c_smbus_read_byte+0x42/0x70 my2c_init+0xa2/0x1000 [my2c] do_one_initcall+0x51/0x192 do_init_module+0x62/0x216 load_module+0x20f9/0x2b50 SYSC_init_module+0x19a/0x1c0 SyS_init_module+0xe/0x10 do_syscall_64+0x6c/0x1a0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Reported-by:
John Sperbeck <jsperbeck@google.com> Tested-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Peter Rosin authored
[ Upstream commit 62cedf3e ] Needed for annotating rt_mutex locks. Tested-by:
-
