- 24 Oct, 2019 32 commits
-
-
Janusz Krzysztofik authored
As calculation of pixel clock hardware divisor no longer depends on mbus format specific maximum pixel clock, there is no need to reapply the divisor on format change. Drop related code from ov6650_s_fmt() helper. Since a master clock hardware divisor, so far applied only together with the pixel clock divisor in a single operation, will no longer be applied from ov6650_s_fmt(), apply it, still using a hardcoded value for now, from ov6650_prog_dflt() helper so hardware is still initialised correctly on device probe. Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Janusz Krzysztofik authored
As appears from an analysis of to_clkrc() helper code after its pclk_limit argument has been dropped, its result no longer depends on another argument - pclk_max. Moreover, assuming that a constant value of FRAME_RATE_MAX is always used as a denominator of the only significant argument left - a struct v4l2_fract, the result in fact depends only on the numerator value of that argument. As a further consequence, it no longer makes sense to recalculate frame intervals by converting them forth and back with a GET_CLKRC_DIV(to_clkrc(tpf)) construct. Drop use of GET_CLKRC_DIV() on results of to_clkrc() where possible - use the frame interval value directly. Furthermore, replace the to_clkrc() helper function with a simple macro and update its users to always use FRAME_RATE_MAX as frame interval denominator and pass only its numerator as an argument. Signed-off-by:
-
Janusz Krzysztofik authored
That attribute used to be obtained from platform data by a soc_camera host interface and passed to the sensor driver for .s_mbus_fmt() video operation callback, later reused as .set_fmt() pad operation callback, to be able to limit frame rate. The driver stored that value in its private structure for further use from .g/s_parm(), later converted to g/s_frame_interval(). On conversion of the driver from soc_camera sensor to a standalone V4L2 subdevice by commit 23a52386 ("media: ov6650: convert to standalone v4l2 subdevice"), that attribute had been replaced by a constant and hardcoded to an arbitrarily chosen pixel clock limit. Drop it. Host interfaces can limit frame rate if needed by calling .s_frame_interval(). Signed-off-by:
-
Janusz Krzysztofik authored
The driver stores a frame interval value supposed to be in line with hardware state in a device private structure. Since the driver initial submission, the respective field of the structure has never been initialised on device probe. Moreover, if updated from .s_frame_interval(), a new value is stored before it is applied on hardware. If an error occurs during device update, the stored value may no longer reflect hardware state and consecutive calls to .g_frame_interval() may return incorrect information. Assuming a failed update of the device means its actual state hasn't changed, update the frame interval field of the device private structure with a new value only after it is successfully applied on hardware so it always reflects actual hardware state to the extent possible. Also, initialise the field with hardware default frame interval on device probe. Signed-off-by:
-
Sebastian Andrzej Siewior authored
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the Kconfig dependency to CONFIG_PREEMPTION. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Alexandre Courbot authored
The request API documentation introduced a new section which should have been a subsection. Fix this. Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Signed-off-by:
Alexandre Courbot <gnurou@gmail.com> Signed-off-by:
-
Fabio Estevam authored
Pass the v4l2-ctl configuration for the imx6q-sabreauto PAL example for completeness and consistency. Suggested-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
-
Fabio Estevam authored
The i.MX6DL sabreauto has different numbering on the I2C bus and I2C muxes compared to the i.MX6Q as shown in the kernel log below: [ 5.159423] imx-media: ipu1_csi0_mux:5 -> ipu1_csi0:0 [ 5.164618] imx-media: ipu1_csi1_mux:5 -> ipu1_csi1:0 [ 5.169953] imx-media: adv7180 4-0021:0 -> ipu1_csi0_mux:4 To avoid confusion, add an entry that shows how to setup the links and configure the pads that are specific to the i.MX6DL sabreauto. Signed-off-by:
-
Fabio Estevam authored
In the i.MX6Q sabreauto pipeline example, it is better to provide a real example for the output format, so do it just like in the previous lines for consistency. Signed-off-by:
-
Fabio Estevam authored
Improve the documentation by specifying that the instructions are related to the i.MX6Q sabreauto variant. This avoids confusion if someone follows these steps on a i.MX6DL sabreauto, which has different numbering on the I2C bus and I2C muxes. Signed-off-by:
-
Christophe JAILLET authored
Don't populate the array 'cri' on the stack but instead make it static and const. Makes the object code smaller by 165 bytes. Turn the 2nd parameter of 'log_infoframe()' const accordingly. Before: text data bss dec hex filename 98533 20024 256 118813 1d01d drivers/media/i2c/adv7842.o After: text data bss dec hex filename 98304 20088 256 118648 1cf78 drivers/media/i2c/adv7842.o Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read and is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
There appears to be a copy-paste error on the access of csc_coeffs.y2r.r601.full.coeff, I believe csc_coeffs.2yr.r601.full.coeff should be used instead. This is a moot point as the code is never reached, but at least use the correct structure element. Addresses-Coverity: ("Copy-paste error") Fixes: 3ff3a712 ("media: ti-vpe: vpe: don't rely on colorspace member for conversion") Signed-off-by:Benoit Parrot <bparrot@ti.com> Signed-off-by:
-
Fabio Estevam authored
Currently the "chip found" message is shown even in the case where the I2C address is wrongly passed in the device tree, or also in the case of probe failure, which is misleading. To avoid such problem, move this message after real I2C transactions have been successfully made and we are certain that the adv7180 is really present and probed. Signed-off-by:
-
Navid Emamdoost authored
In af9005_identify_state when returning -EIO the allocated buffer should be released. Replace the "return -EIO" with assignment into ret and move deb_info() under a check. Fixes: af4e067e ("V4L/DVB (5625): Add support for the AF9005 demodulator from Afatech") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Drivers that use the CEC pin framework have no way of processing messages themselves by providing the 'received' callback. This is present in cec_ops, but not in cec_pin_ops. Add support for this callback. Signed-off-by:
-
Jae Hyun Yoo authored
CAPTURE_COMPLETE and FRAME_COMPLETE interrupts come even when these are disabled in the VE_INTERRUPT_CTRL register and eventually this behavior causes disabling irq itself like below: [10055.108784] irq 23: nobody cared (try booting with the "irqpoll" option) [10055.115525] CPU: 0 PID: 331 Comm: swampd Tainted: G W 5.3.0-4fde000-dirty-d683e2e #1 [10055.124565] Hardware name: Generic DT based system [10055.129355] Backtrace: [10055.131854] [<80107d7c>] (dump_backtrace) from [<80107fb0>] (show_stack+0x20/0x24) [10055.139431] r7:00000017 r6:00000001 r5:00000000 r4:9d51dc00 [10055.145120] [<80107f90>] (show_stack) from [<8074bf50>] (dump_stack+0x20/0x28) [10055.152361] [<8074bf30>] (dump_stack) from [<80150ffc>] (__report_bad_irq+0x40/0xc0) [10055.160109] [<80150fbc>] (__report_bad_irq) from [<80150f2c>] (note_interrupt+0x23c/0x294) [10055.168374] r9:015b6e60 r8:00000000 r7:00000017 r6:00000001 r5:00000000 r4:9d51dc00 [10055.176136] [<80150cf0>] (note_interrupt) from [<8014df1c>] (handle_irq_event_percpu+0x88/0x98) [10055.184835] r10:7eff7910 r9:015b6e60 r8:00000000 r7:9d417600 r6:00000001 r5:00000002 [10055.192657] r4:9d51dc00 r3:00000000 [10055.196248] [<8014de94>] (handle_irq_event_percpu) from [<8014df64>] (handle_irq_event+0x38/0x4c) [10055.205113] r5:80b56d50 r4:9d51dc00 [10055.208697] [<8014df2c>] (handle_irq_event) from [<80151f1c>] (handle_level_irq+0xbc/0x12c) [10055.217037] r5:80b56d50 r4:9d51dc00 [10055.220623] [<80151e60>] (handle_level_irq) from [<8014d4b8>] (generic_handle_irq+0x30/0x44) [10055.229052] r5:80b56d50 r4:00000017 [10055.232648] [<8014d488>] (generic_handle_irq) from [<8014d524>] (__handle_domain_irq+0x58/0xb4) [10055.241356] [<8014d4cc>] (__handle_domain_irq) from [<801021e4>] (avic_handle_irq+0x68/0x70) [10055.249797] r9:015b6e60 r8:00c5387d r7:00c5387d r6:ffffffff r5:9dd33fb0 r4:9d402380 [10055.257539] [<8010217c>] (avic_handle_irq) from [<80101e34>] (__irq_usr+0x54/0x80) [10055.265105] Exception stack(0x9dd33fb0 to 0x9dd33ff8) [10055.270152] 3fa0: 015d0530 00000000 00000000 015d0538 [10055.278328] 3fc0: 015d0530 015b6e60 00000000 00000000 0052c5d0 015b6e60 7eff7910 7eff7918 [10055.286496] 3fe0: 76ce5614 7eff7908 0050e2f4 76a3a08c 20000010 ffffffff [10055.293104] r5:20000010 r4:76a3a08c [10055.296673] handlers: [10055.298967] [<79f218a5>] irq_default_primary_handler threaded [<1de88514>] aspeed_video_irq [10055.307344] Disabling IRQ #23 To fix this issue, this commit makes the interrupt handler clear these garbage interrupts. This driver enables and uses only COMP_COMPLETE interrupt instead for frame handling. Signed-off-by:
Jae Hyun Yoo <jae.hyun.yoo@intel.com> Reviewed-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
-
Jae Hyun Yoo authored
Sometimes it detects a weird resolution such as 1024x287 when the actual resolution is 1024x768. To resolve such an issue, this commit adds clearing for hsync and vsync polarity register bits at the beginning of the first mode detection. This is recommended in the datasheet. Signed-off-by:
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by:
-
Jae Hyun Yoo authored
To prevent inaccurate detections of resolution, this commit enables clearing of hsync/vsync polarity bits based on probed sync state. Signed-off-by:
-
Paul Kocialkowski authored
This introduces support for HEVC/H.265 to the Cedrus VPU driver, with both uni-directional and bi-directional prediction modes supported. Field-coded (interlaced) pictures, custom quantization matrices and 10-bit output are not supported at this point. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Paul Kocialkowski authored
Document the current state of the HEVC slice pixel format. The format will need to evolve in the future, which is why it is not part of the public API. Signed-off-by:
-
Paul Kocialkowski authored
This introduces the required definitions for HEVC decoding support with stateless VPUs. The controls associated to the HEVC slice format provide the required meta-data for decoding slices extracted from the bitstream. They are not exported to the public V4L2 API since reworking this API will likely be needed for covering various use-cases and new hardware. Multi-slice decoding is exposed as a valid decoding mode to match current H.264 support but it is not yet implemented. The interface comes with the following limitations: * No custom quantization matrices (scaling lists); * Support for a single temporal layer only; * No slice entry point offsets support; * No conformance window support; * No VUI parameters support; * No support for SPS extensions: range, multilayer, 3d, scc, 4 bits; * No support for PPS extensions: range, multilayer, 3d, scc, 4 bits. Signed-off-by:
-
Paul Kocialkowski authored
DIV_ROUND_UP's first argument doesn't need to be wrapped in parenthesis since that is already being taken care of in the macro's definition. Signed-off-by:
-
Paul Kocialkowski authored
We need to shift and mask values at different occasions to fill up cedrus registers. This was done using macros that don't explicitly treat arguments as unsigned, leading to possibly undefined behavior. Introduce the SHIFT_AND_MASK_BITS macro and use it where possible. In cases where it doesn't apply as-is, explicitly cast to unsigned instead. This macro should be moved to include/linux/bits.h eventually. Signed-off-by:
-
Vandana BN authored
Support metadata output in vivid driver. Metadata output is used to set brightness, contrast, saturation and hue. Adds new files for metadata output. Signed-off-by:
Vandana BN <bnvandana@gmail.com> Signed-off-by:
-
Vandana BN authored
Add new metadata format to support metadata output in vivid. Signed-off-by:
-
Vandana BN authored
Adds new file for describing new metadata format V4L2_META_FMT_VIVID added in vivid driver. Signed-off-by:
-
Vandana BN authored
This patch adds meatadata capture support in vivid driver. Adds new files for metadata capture. Adds vivid controls to generate PTS and SCR for metadata stream. also fixes v4l2-compliance issues seen on metadata device. Signed-off-by:
-
Hans Verkuil authored
Touch devices have obviously no tuner, so don't attempt to enable those ioctls for such devices. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
Touch devices mark too many ioctls as valid. Restrict the list of valid ioctls for touch devices. Signed-off-by:
-
Hans Verkuil authored
In determine_valid_ioctls() we can use SET_VALID_IOCTL to enable ioctls for SDR, simplifying the code. Signed-off-by:
-
Vandana BN authored
If the type is VFL_TYPE_GRABBER, then also check device_caps to see if the video device supports video and/or metadata and disable unneeded ioctls. Without this change, format ioctls for both video and metadata devices could be called on both device nodes. This is true for other ioctls as well, even if the device supports only video or metadata. Metadata devices act similar to VBI devices w.r.t. which ioctls should be enabled. This makes sense since VBI *is* metadata. Signed-off-by:
-
- 21 Oct, 2019 7 commits
-
-
Alexandre Courbot authored
Documents the protocol that user-space should follow when communicating with stateless video decoders. The stateless video decoding API makes use of the new request and tags APIs. While it has been implemented with the Cedrus driver so far, it should probably still be considered staging for a short while. Signed-off-by:
-
Jernej Skrabec authored
With recent changes, support for decoding multi-slice frames can be easily added now. Signal VPU if current slice is first in frame or not and add information about first macroblock coordinates. When frame contains multiple slices and driver works in slice mode, it's more efficient to hold capture buffer in queue until all slices of a same frame are decoded. Add support for that to Cedrus driver by exposing and implementing V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF capability. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> [hverkuil-cisco@xs4all.nl: rewritten to use v4l2_m2m_buf_done_and_job_finish] [hverkuil-cisco@xs4all.nl: removed unnecessary (u32) cast] [hverkuil-cisco@xs4all.nl: use new_frame v4l2_m2m_ctx bool] Signed-off-by:
-
Hans Verkuil authored
Drivers that support VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF typically want to know if a new frame is started (i.e. the first slice is about to be processed). Add a new_frame bool to v4l2_m2m_ctx and set it accordingly. Signed-off-by:
-
Jernej Skrabec authored
These helpers are used by stateless codecs when they support multiple slices per frame and hold capture buffer flag is set. It's expected that all such codecs will use this code. Signed-off-by:
-
Hans Verkuil authored
Add this new V4L2_DEC_CMD_FLUSH decoder command and document it. Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
-
Hans Verkuil authored
Check for held buffers that are ready to be returned to vb2 in __v4l2_m2m_try_queue(). This avoids drivers having to handle this case. Add v4l2_m2m_buf_done_and_job_finish() to correctly return source and destination buffers and mark the job as finished while taking a held destination buffer into account (i.e. that buffer won't be returned). This has to be done while job_spinlock is held to avoid race conditions. Signed-off-by:
-
Hans Verkuil authored
This patch adds support for the V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF flag. It also adds a new V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF capability. Drivers should set vb2_queue->subsystem_flags to VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF to indicate support for this flag. Signed-off-by:
-
- 16 Oct, 2019 1 commit
-
-
Hariprasad Kelam authored
Fix below issue reported by coccicheck drivers/staging//media/omap4iss/iss.c:915:1-15: WARNING: Use devm_platform_ioremap_resource for iss -> regs [ res ] Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by:
-
