1. 19 Sep, 2018 16 commits
    • Nicholas Piggin's avatar
      powerpc/64s/hash: Use POWER9 SLBIA IH=3 variant in switch_slb · 82d8f4c2
      Nicholas Piggin authored
      POWER9 introduces SLBIA IH=3, which invalidates all SLB entries and
      associated lookaside information that have a class value of 1, which
      Linux assigns to user addresses. This matches what switch_slb wants,
      and allows a simple fast implementation that avoids the slb_cache
      complexity.
      
      As a side-effect, the POWER5 < DD2.1 SLB invalidation workaround is
      also avoided on POWER9.
      
      Process context switching rate is improved about 2.2% for a small
      process that hits the slb cache which is the best case for the current
      code.
      Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      82d8f4c2
    • Nicholas Piggin's avatar
      powerpc/64s/hash: Use POWER6 SLBIA IH=1 variant in switch_slb · 5141c182
      Nicholas Piggin authored
      The SLBIA IH=1 hint will remove all non-zero SLBEs, but only
      invalidate ERAT entries associated with a class value of 1, for
      processors that support the hint (e.g., POWER6 and newer), which
      Linux assigns to user addresses.
      
      This prevents kernel ERAT entries from being invalidated when
      context switchig (if the thread faulted in more than 8 user SLBEs).
      Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      5141c182
    • Nicholas Piggin's avatar
      powerpc/64s/hash: remove the vmalloc segment from the bolted SLB · 85376e2a
      Nicholas Piggin authored
      Remove the vmalloc segment from bolted SLBEs. This is not required to
      be bolted, and seems like it was added to help pre-load the SLB on
      context switch. However there are now other segments like the vmemmap
      segment and non-zero node memory that often take misses after a context
      switch, so it is better to solve this in a more general way.
      
      A subsequent change will track free SLB entries and uses those rather
      than round-robin overwrite valid entries, which makes it far less
      likely for kernel SLBEs to be evicted after they are installed.
      Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      85376e2a
    • Nicholas Piggin's avatar
      powerpc/64s/hash: move POWER5 < DD2.1 slbie workaround where it is needed · 8b92887c
      Nicholas Piggin authored
      The POWER5 < DD2.1 issue is that slbie needs to be issued more than
      once. It came in with this change:
      
      ChangeSet@1.1608, 2004-04-29 07:12:31-07:00, david@gibson.dropbear.id.au
        [PATCH] POWER5 erratum workaround
      
        Early POWER5 revisions (<DD2.1) have a problem requiring slbie
        instructions to be repeated under some circumstances.  The patch below
        adds a workaround (patch made by Anton Blanchard).
      
      (aka. 3e4520f7605243abf66a7ccd3d2e49e48e8c0483 in the full history tree)
      
      The extra slbie in switch_slb is done even for the case where slbia is
      called (slb_flush_and_rebolt). I don't believe that is required
      because there are other slb_flush_and_rebolt callers which do not
      issue the workaround slbie, which would be broken if it was required.
      
      It also seems to be fine inside the isync with the first slbie, as it
      is in the kernel stack switch code.
      
      So move this workaround to where it is required. This is not much of
      an optimisation because this is the fast path, but it makes the code
      more understandable and neater.
      Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
      [mpe: Retain slbie_data initialisation to avoid compiler warning]
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      8b92887c
    • Nicholas Piggin's avatar
      powerpc/64s/hash: avoid the POWER5 < DD2.1 slb invalidate workaround on POWER8/9 · 505ea82e
      Nicholas Piggin authored
      I only have POWER8/9 to test, so just remove it for those.
      Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      505ea82e
    • Nicholas Piggin's avatar
      powerpc/64s/hash: Fix stab_rr off by one initialization · 09b4438d
      Nicholas Piggin authored
      This causes SLB alloation to start 1 beyond the start of the SLB.
      There is no real problem because after it wraps it stats behaving
      properly, it's just surprisig to see when looking at SLB traces.
      Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      09b4438d
    • Mahesh Salgaonkar's avatar
      powernv/pseries: consolidate code for mce early handling. · db7d31ac
      Mahesh Salgaonkar authored
      Now that other platforms also implements real mode mce handler,
      lets consolidate the code by sharing existing powernv machine check
      early code. Rename machine_check_powernv_early to
      machine_check_common_early and reuse the code.
      Signed-off-by: default avatarMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      db7d31ac
    • Mahesh Salgaonkar's avatar
      powerpc/pseries: Dump the SLB contents on SLB MCE errors. · c6d15258
      Mahesh Salgaonkar authored
      If we get a machine check exceptions due to SLB errors then dump the
      current SLB contents which will be very much helpful in debugging the
      root cause of SLB errors. Introduce an exclusive buffer per cpu to hold
      faulty SLB entries. In real mode mce handler saves the old SLB contents
      into this buffer accessible through paca and print it out later in virtual
      mode.
      
      With this patch the console will log SLB contents like below on SLB MCE
      errors:
      
      [  507.297236] SLB contents of cpu 0x1
      [  507.297237] Last SLB entry inserted at slot 16
      [  507.297238] 00 c000000008000000 400ea1b217000500
      [  507.297239]   1T  ESID=   c00000  VSID=      ea1b217 LLP:100
      [  507.297240] 01 d000000008000000 400d43642f000510
      [  507.297242]   1T  ESID=   d00000  VSID=      d43642f LLP:110
      [  507.297243] 11 f000000008000000 400a86c85f000500
      [  507.297244]   1T  ESID=   f00000  VSID=      a86c85f LLP:100
      [  507.297245] 12 00007f0008000000 4008119624000d90
      [  507.297246]   1T  ESID=       7f  VSID=      8119624 LLP:110
      [  507.297247] 13 0000000018000000 00092885f5150d90
      [  507.297247]  256M ESID=        1  VSID=   92885f5150 LLP:110
      [  507.297248] 14 0000010008000000 4009e7cb50000d90
      [  507.297249]   1T  ESID=        1  VSID=      9e7cb50 LLP:110
      [  507.297250] 15 d000000008000000 400d43642f000510
      [  507.297251]   1T  ESID=   d00000  VSID=      d43642f LLP:110
      [  507.297252] 16 d000000008000000 400d43642f000510
      [  507.297253]   1T  ESID=   d00000  VSID=      d43642f LLP:110
      [  507.297253] ----------------------------------
      [  507.297254] SLB cache ptr value = 3
      [  507.297254] Valid SLB cache entries:
      [  507.297255] 00 EA[0-35]=    7f000
      [  507.297256] 01 EA[0-35]=        1
      [  507.297257] 02 EA[0-35]=     1000
      [  507.297257] Rest of SLB cache entries:
      [  507.297258] 03 EA[0-35]=    7f000
      [  507.297258] 04 EA[0-35]=        1
      [  507.297259] 05 EA[0-35]=     1000
      [  507.297260] 06 EA[0-35]=       12
      [  507.297260] 07 EA[0-35]=    7f000
      Suggested-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
      Suggested-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
      Reviewed-by: default avatarNicholas Piggin <npiggin@gmail.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      c6d15258
    • Mahesh Salgaonkar's avatar
      powerpc/pseries: Display machine check error details. · 8f0b8056
      Mahesh Salgaonkar authored
      Extract the MCE error details from RTAS extended log and display it to
      console.
      
      With this patch you should now see mce logs like below:
      
      [  142.371818] Severe Machine check interrupt [Recovered]
      [  142.371822]   NIP [d00000000ca301b8]: init_module+0x1b8/0x338 [bork_kernel]
      [  142.371822]   Initiator: CPU
      [  142.371823]   Error type: SLB [Multihit]
      [  142.371824]     Effective address: d00000000ca70000
      Signed-off-by: default avatarMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      8f0b8056
    • Mahesh Salgaonkar's avatar
      powerpc/pseries: Flush SLB contents on SLB MCE errors. · a43c1590
      Mahesh Salgaonkar authored
      On pseries, as of today system crashes if we get a machine check
      exceptions due to SLB errors. These are soft errors and can be fixed
      by flushing the SLBs so the kernel can continue to function instead of
      system crash. We do this in real mode before turning on MMU. Otherwise
      we would run into nested machine checks. This patch now fetches the
      rtas error log in real mode and flushes the SLBs on SLB/ERAT errors.
      Signed-off-by: default avatarMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
      Signed-off-by: default avatarMichal Suchanek <msuchanek@suse.com>
      Reviewed-by: default avatarNicholas Piggin <npiggin@gmail.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      a43c1590
    • Mahesh Salgaonkar's avatar
      powerpc/pseries: Define MCE error event section. · 04fce21c
      Mahesh Salgaonkar authored
      On pseries, the machine check error details are part of RTAS extended
      event log passed under Machine check exception section. This patch adds
      the definition of rtas MCE event section and related helper
      functions.
      Signed-off-by: default avatarMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      04fce21c
    • Breno Leitao's avatar
      selftests/powerpc: Do not fail with reschedule · 44d947ef
      Breno Leitao authored
      There are cases where the test is not expecting to have the transaction
      aborted, but, the test process might have been rescheduled, either in the
      OS level or by KVM (if it is running on a KVM guest machine). The process
      reschedule will cause a treclaim/recheckpoint which will cause the
      transaction to doom, aborting the transaction as soon as the process is
      rescheduled back to the CPU. This might cause the test to fail, but this is
      not a failure in essence.
      
      If that is the case, TEXASR[FC] is indicated with either
      TM_CAUSE_RESCHEDULE or TM_CAUSE_KVM_RESCHEDULE for KVM interruptions.
      
      In this scenario, ignore these two failures and avoid the whole test to
      return failure.
      Signed-off-by: default avatarBreno Leitao <leitao@debian.org>
      Reviewed-by: default avatarGustavo Romero <gromero@linux.ibm.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      44d947ef
    • Breno Leitao's avatar
      powerpc/iommu: Avoid derefence before pointer check · 984ecdd6
      Breno Leitao authored
      The tbl pointer is being derefenced by IOMMU_PAGE_SIZE prior the check
      if it is not NULL.
      
      Just moving the dereference code to after the check, where there will
      be guarantee that 'tbl' will not be NULL.
      Signed-off-by: default avatarBreno Leitao <leitao@debian.org>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      984ecdd6
    • Breno Leitao's avatar
      powerpc/xive: Use xive_cpu->chip_id instead of looking it up again · 8ac9e5bf
      Breno Leitao authored
      Function xive_native_get_ipi() might use chip_id without it being
      initialized, if the CPU node is not found, as reported by smatch:
      
        error: uninitialized symbol 'chip_id'
      
      As suggested by Cédric, we can use xc->chip_id instead of consulting
      the device tree for chip id, which is safe since xive_prepare_cpu()
      should have initialized ->chip_id by the time xive_native_get_ipi() is
      called.
      Signed-off-by: default avatarBreno Leitao <leitao@debian.org>
      Reviewed-by: default avatarCédric Le Goater <clg@kaod.org>
      [mpe: Tweak change log]
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      8ac9e5bf
    • Christophe Lombard's avatar
      ocxl: Fix access to the AFU Descriptor Data · 6f8e45f7
      Christophe Lombard authored
      The AFU Information DVSEC capability is a means to extract common,
      general information about all of the AFUs associated with a Function
      independent of the specific functionality that each AFU provides.
      Write in the AFU Index field allows to access to the descriptor data
      for each AFU.
      
      With the current code, we are not able to access to these specific data
      when the index >= 1 because we are writing to the wrong location.
      All requests to the data of each AFU are pointing to those of the AFU 0,
      which could have impacts when using a card with more than one AFU per
      function.
      
      This patch fixes the access to the AFU Descriptor Data indexed by the
      AFU Info Index field.
      
      Fixes: 5ef3166e ("ocxl: Driver code for 'generic' opencapi devices")
      Cc: stable <stable@vger.kernel.org>     # 4.16
      Signed-off-by: default avatarChristophe Lombard <clombard@linux.vnet.ibm.com>
      Acked-by: default avatarFrederic Barrat <fbarrat@linux.vnet.ibm.com>
      Acked-by: default avatarAndrew Donnellan <andrew.donnellan@au1.ibm.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      6f8e45f7
    • Rashmica Gupta's avatar
      powerpc/memtrace: Remove memory in chunks · 3f7daf3d
      Rashmica Gupta authored
      When hot-removing memory release_mem_region_adjustable() splits iomem
      resources if they are not the exact size of the memory being
      hot-deleted. Adding this memory back to the kernel adds a new resource.
      
      Eg a node has memory 0x0 - 0xfffffffff. Hot-removing 1GB from
      0xf40000000 results in the single resource 0x0-0xfffffffff being split
      into two resources: 0x0-0xf3fffffff and 0xf80000000-0xfffffffff.
      
      When we hot-add the memory back we now have three resources:
      0x0-0xf3fffffff, 0xf40000000-0xf7fffffff, and 0xf80000000-0xfffffffff.
      
      This is an issue if we try to remove some memory that overlaps
      resources. Eg when trying to remove 2GB at address 0xf40000000,
      release_mem_region_adjustable() fails as it expects the chunk of memory
      to be within the boundaries of a single resource. We then get the
      warning: "Unable to release resource" and attempting to use memtrace
      again gives us this error: "bash: echo: write error: Resource
      temporarily unavailable"
      
      This patch makes memtrace remove memory in chunks that are always the
      same size from an address that is always equal to end_of_memory -
      n*size, for some n. So hotremoving and hotadding memory of different
      sizes will now not attempt to remove memory that spans multiple
      resources.
      Signed-off-by: default avatarRashmica Gupta <rashmica.g@gmail.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      3f7daf3d
  2. 17 Sep, 2018 7 commits
  3. 14 Sep, 2018 2 commits
    • Alan Modra's avatar
      powerpc/vdso: Correct call frame information · 56d20861
      Alan Modra authored
      Call Frame Information is used by gdb for back-traces and inserting
      breakpoints on function return for the "finish" command.  This failed
      when inside __kernel_clock_gettime.  More concerning than difficulty
      debugging is that CFI is also used by stack frame unwinding code to
      implement exceptions.  If you have an app that needs to handle
      asynchronous exceptions for some reason, and you are unlucky enough to
      get one inside the VDSO time functions, your app will crash.
      
      What's wrong:  There is control flow in __kernel_clock_gettime that
      reaches label 99 without saving lr in r12.  CFI info however is
      interpreted by the unwinder without reference to control flow: It's a
      simple matter of "Execute all the CFI opcodes up to the current
      address".  That means the unwinder thinks r12 contains the return
      address at label 99.  Disabuse it of that notion by resetting CFI for
      the return address at label 99.
      
      Note that the ".cfi_restore lr" could have gone anywhere from the
      "mtlr r12" a few instructions earlier to the instruction at label 99.
      I put the CFI as late as possible, because in general that's best
      practice (and if possible grouped with other CFI in order to reduce
      the number of CFI opcodes executed when unwinding).  Using r12 as the
      return address is perfectly fine after the "mtlr r12" since r12 on
      that code path still contains the return address.
      
      __get_datapage also has a CFI error.  That function temporarily saves
      lr in r0, and reflects that fact with ".cfi_register lr,r0".  A later
      use of r0 means the CFI at that point isn't correct, as r0 no longer
      contains the return address.  Fix that too.
      Signed-off-by: default avatarAlan Modra <amodra@gmail.com>
      Tested-by: default avatarReza Arbab <arbab@linux.ibm.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      56d20861
    • Michael Neuling's avatar
      powerpc/tm: Fix HFSCR bit for no suspend case · dd9a8c5a
      Michael Neuling authored
      Currently on P9N DD2.1 we end up taking infinite TM facility
      unavailable exceptions on the first TM usage by userspace.
      
      In the special case of TM no suspend (P9N DD2.1), Linux is told TM is
      off via CPU dt-ftrs but told to (partially) use it via
      OPAL_REINIT_CPUS_TM_SUSPEND_DISABLED. So HFSCR[TM] will be off from
      dt-ftrs but we need to turn it on for the no suspend case.
      
      This patch fixes this by enabling HFSCR TM in this case.
      
      Cc: stable@vger.kernel.org # 4.15+
      Signed-off-by: default avatarMichael Neuling <mikey@neuling.org>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      dd9a8c5a
  4. 10 Sep, 2018 1 commit
  5. 09 Sep, 2018 7 commits
  6. 08 Sep, 2018 6 commits
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · f8f65382
      Linus Torvalds authored
      Pull KVM fixes from Radim Krčmář:
       "ARM:
         - Fix a VFP corruption in 32-bit guest
         - Add missing cache invalidation for CoW pages
         - Two small cleanups
      
        s390:
         - Fallout from the hugetlbfs support: pfmf interpretion and locking
         - VSIE: fix keywrapping for nested guests
      
        PPC:
         - Fix a bug where pages might not get marked dirty, causing guest
           memory corruption on migration
         - Fix a bug causing reads from guest memory to use the wrong guest
           real address for very large HPT guests (>256G of memory), leading
           to failures in instruction emulation.
      
        x86:
         - Fix out of bound access from malicious pv ipi hypercalls
           (introduced in rc1)
         - Fix delivery of pending interrupts when entering a nested guest,
           preventing arbitrarily late injection
         - Sanitize kvm_stat output after destroying a guest
         - Fix infinite loop when emulating a nested guest page fault and
           improve the surrounding emulation code
         - Two minor cleanups"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
        KVM: LAPIC: Fix pv ipis out-of-bounds access
        KVM: nVMX: Fix loss of pending IRQ/NMI before entering L2
        arm64: KVM: Remove pgd_lock
        KVM: Remove obsolete kvm_unmap_hva notifier backend
        arm64: KVM: Only force FPEXC32_EL2.EN if trapping FPSIMD
        KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW
        KVM: s390: Properly lock mm context allow_gmap_hpage_1m setting
        KVM: s390: vsie: copy wrapping keys to right place
        KVM: s390: Fix pfmf and conditional skey emulation
        tools/kvm_stat: re-animate display of dead guests
        tools/kvm_stat: indicate dead guests as such
        tools/kvm_stat: handle guest removals more gracefully
        tools/kvm_stat: don't reset stats when setting PID filter for debugfs
        tools/kvm_stat: fix updates for dead guests
        tools/kvm_stat: fix handling of invalid paths in debugfs provider
        tools/kvm_stat: fix python3 issues
        KVM: x86: Unexport x86_emulate_instruction()
        KVM: x86: Rename emulate_instruction() to kvm_emulate_instruction()
        KVM: x86: Do not re-{try,execute} after failed emulation in L2
        KVM: x86: Default to not allowing emulation retry in kvm_mmu_page_fault
        ...
      f8f65382
    • Linus Torvalds's avatar
      Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 0f3aa48a
      Linus Torvalds authored
      Pull ARM SoC fixes from Olof Johansson:
       "A few more fixes who have trickled in:
      
         - MMC bus width fixup for some Allwinner platforms
      
         - Fix for NULL deref in ti-aemif when no platform data is passed in
      
         - Fix div by 0 in SCMI code
      
         - Add a missing module alias in a new RPi driver"
      
      * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        memory: ti-aemif: fix a potential NULL-pointer dereference
        firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero
        hwmon: rpi: add module alias to raspberrypi-hwmon
        arm64: allwinner: dts: h6: fix Pine H64 MMC bus width
      0f3aa48a
    • Olof Johansson's avatar
      Merge tag 'sunxi-fixes-for-4.19' of... · a132bb90
      Olof Johansson authored
      Merge tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
      
      Allwinner fixes for 4.19
      
      Just one fix for H6 mmc on the Pine H64: the mmc bus width was missing
      from the device tree. This was added in 4.19-rc1.
      
      * tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
        arm64: allwinner: dts: h6: fix Pine H64 MMC bus width
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      a132bb90
    • Nadav Amit's avatar
      x86/mm: Use WRITE_ONCE() when setting PTEs · 9bc4f28a
      Nadav Amit authored
      When page-table entries are set, the compiler might optimize their
      assignment by using multiple instructions to set the PTE. This might
      turn into a security hazard if the user somehow manages to use the
      interim PTE. L1TF does not make our lives easier, making even an interim
      non-present PTE a security hazard.
      
      Using WRITE_ONCE() to set PTEs and friends should prevent this potential
      security hazard.
      
      I skimmed the differences in the binary with and without this patch. The
      differences are (obviously) greater when CONFIG_PARAVIRT=n as more
      code optimizations are possible. For better and worse, the impact on the
      binary with this patch is pretty small. Skimming the code did not cause
      anything to jump out as a security hazard, but it seems that at least
      move_soft_dirty_pte() caused set_pte_at() to use multiple writes.
      Signed-off-by: default avatarNadav Amit <namit@vmware.com>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Acked-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
      Cc: Dave Hansen <dave.hansen@linux.intel.com>
      Cc: Andi Kleen <ak@linux.intel.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Vlastimil Babka <vbabka@suse.cz>
      Cc: Sean Christopherson <sean.j.christopherson@intel.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: stable@vger.kernel.org
      Link: https://lkml.kernel.org/r/20180902181451.80520-1-namit@vmware.com
      9bc4f28a
    • Thomas Gleixner's avatar
      x86/apic/vector: Make error return value negative · 47b7360c
      Thomas Gleixner authored
      activate_managed() returns EINVAL instead of -EINVAL in case of
      error. While this is unlikely to happen, the positive return value would
      cause further malfunction at the call site.
      
      Fixes: 2db1f959 ("x86/vector: Handle managed interrupts proper")
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Cc: stable@vger.kernel.org
      47b7360c
    • Linus Torvalds's avatar
      Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · d7b686eb
      Linus Torvalds authored
      Pull i2c fixes from Wolfram Sang:
      
       - bugfixes for uniphier, i801, and xiic drivers
      
       - ID removal (never produced) for imx
      
       - one MAINTAINER addition
      
      * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
        i2c: xiic: Record xilinx i2c with Zynq fragment
        i2c: xiic: Make the start and the byte count write atomic
        i2c: i801: fix DNV's SMBCTRL register offset
        i2c: imx-lpi2c: Remove mx8dv compatible entry
        dt-bindings: imx-lpi2c: Remove mx8dv compatible entry
        i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP
        i2c: uniphier: issue STOP only for last message or I2C_M_STOP
      d7b686eb
  7. 07 Sep, 2018 1 commit
    • Linus Torvalds's avatar
      Merge tag 'arc-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc · 2c34a0e0
      Linus Torvalds authored
      Pull ARC updates from Vineet Gupta:
      
       - Fix for atomic_fetch_#op  [Will Deacon]
      
       - Enable per device IOC [Eugeniy Paltsev]
      
       - Remove redundant gcc version checks [Masahiro Yamada]
      
       - Miscll platform config/DT updates [Alexey Brodkin]
      
      * tag 'arc-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
        ARC: don't check for HIGHMEM pages in arch_dma_alloc
        ARC: IOC: panic if both IOC and ZONE_HIGHMEM enabled
        ARC: dma [IOC] Enable per device io coherency
        ARC: dma [IOC]: mark DMA devices connected as dma-coherent
        ARC: atomics: unbork atomic_fetch_##op()
        arc: remove redundant GCC version checks
        ARC: sort Kconfig
        ARC: cleanup show_faulting_vma()
        ARC: [plat-axs*]: Enable SWAP
        ARC: [plat-axs*/plat-hsdk]: Allow U-Boot to pass MAC-address to the kernel
        ARC: configs: cleanup
      2c34a0e0