- 13 Aug, 2014 18 commits
-
-
Chris Wilson authored
Rather than take and release the console_lock() around a non-existent DRM_I915_FBDEV, move the lock acquisation into the callee where it will be compiled out by the config option entirely. This includes moving the deferred fb_set_suspend() dance and encapsulating it entirely within intel_fbdev.c. v2: Use an integral work item so that we can explicitly flush the work upon suspend/unload. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Add the flush_work in fbdev_fini per the mailing list discussion. And s/BUG_ON/WARN_ON/ because.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
Ville pointed out the GCCism __builtin_types_compatible_p() that we could use to replace our heavily casted presumption __I915__ macro that was based on comparing struct sizes. Signed-off-by:
-
Ville Syrjälä authored
845/865 support different cursor sizes as well, albeit a bit differently than later platforms. Add the necessary code to make them work. Untested due to lack of hardware. v2: Warn but accept invalid stride (Chris) Rewrite the cursor size checks for other platforms (Chris) v3: More polish and magic to the cursor size checks (Chris) v4: Moar polish and a comment (Chris) Reviewed-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Ever since commit 5efb3e28 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Apr 9 13:28:53 2014 +0300 drm/i915/chv: Add cursor pipe offsets the only difference between i9xx_update_cursor() and ivb_update_cursor() was the hsw+ pipe csc handling. Let's unify them and we can rid outselves of some duplicated code. Signed-off-by:
-
Ville Syrjälä authored
CURSIZE register exists on 845/865 only, so move it to i845_update_cursor(). Changes to cursor size must be done only when the cursor is disabled, so do the write just before enabling the cursor. Signed-off-by:
-
Ville Syrjälä authored
Make sure the cursor gets fully clipped when enabling it on a disabled crtc via setplane. This will prevent the lower level code from attempting to enable the cursor in hardware. Cc: Paulo Zanoni <przanoni@gmail.com> Signed-off-by:
-
Daniel Vetter authored
Also remove related WARN_ONs which seem to have been hit since a rather long time. But apperently no one noticed since our module reload is already WARNING-infested :( Reviewed-by:
Michel Thierry <michel.thierry@intel.com> Signed-off-by:
-
Daniel Vetter authored
We want to move the aliasing ppgtt cleanup back into the global gtt cleanup code for symmetry, but first we need to create such a place. Reviewed-by:
-
Daniel Vetter authored
Address space cleanup isn't really a job for the low-level cleanup callbacks. Without this change we can't reuse the low-level cleanup callback for the aliasing ppgtt cleanup. Reviewed-by:
-
Daniel Vetter authored
Now that all the flow is streamlined the rule is simple: We create a new ppgtt for a new context when we have full ppgtt enabled. Reviewed-by:
-
Daniel Vetter authored
There's a bit a confusion since we track the global gtt, the aliasing and real ppgtt in the ctx->vm pointer. And not all callers really bother to check for the different cases and just presume that it points to a real ppgtt. Now looking closely we don't actually need ->vm to always point at an address space - the only place that cares actually has fixup code already to decide whether to look at the per-proces or the global address space. So switch to just tracking the ppgtt directly and ditch all the extraneous code. v2: Fixup the ppgtt debugfs file to not oops on a NULL ctx->ppgtt. Also drop the early exit - without aliasing ppgtt we want to dump all the ppgtts of the contexts if we have full ppgtt. v3: Actually git add the compile fix. Reviewed-by:
-
Daniel Vetter authored
Stuffing this into the context setup code doesn't make a lot of sense. Also reusing the real ppgtt setup code makes even less sense since the aliasing ppgtt isn't a real address space. Leaving all that stuff unitialized will make sure that we catch any abusers promptly. This is also a prep work to clean up the context->ppgtt link. v2: Fix up the logic fail, I've fumbled it so badly to completely disable ppgtt on gen6. Spotted by Ville and Michel. Also move around the pde write into the gen6 init function, since otherwise it won't work at all. v3: Only initialize the aliasing ppgtt when we actually enable it. Cc: "Thierry, Michel" <michel.thierry@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
Currently we abuse the aliasing ppgtt to set up the ppgtt support in general. Which is a bit backwards since with full ppgtt we don't ever need the aliasing ppgtt. So untangle this and separate the ppgtt init from the aliasing ppgtt. While at it drag it out of the context enabling (which just does a switch to the default context). Note that we still have the differentiation between synchronous and asynchronous ppgtt setup, but that will soon vanish. So also correctly wire up the return value handling to be prepared for when ->switch_mm drops the synchronous parameter and could start to fail. Reviewed-by:
-
Daniel Vetter authored
A subsequent patch will no longer initialize the aliasing ppgtt if we have full ppgtt enabled, since we simply don't need that any more. Unfortunately a few places check for the aliasing ppgtt instead of checking for ppgtt in general. Fix them up. One special case are the gtt offset and size macros, which have some code to remap the aliasing ppgtt to the global gtt. The aliasing ppgtt is _not_ a logical address space, so passing that in as the vm is plain and simple a bug. So just WARN about it and carry on - we have a gracefully fall-through anyway if we can't find the vma. Reviewed-by:
-
Daniel Vetter authored
We already needs this just as a safety check in case the preallocation reservation dance fails. But we definitely need this to be able to move tha aliasing ppgtt setup back out of the context code to this place, where it belongs. Reviewed-by:
-
Daniel Vetter authored
Stuff in headers really aught to have this. Reviewed-by:
-
Daniel Vetter authored
This essentially unbreaks non-ppgtt operation where we'd scribble over random memory. While at it give the vm_to_ppgtt function a proper prefix and make it a bit more paranoid. Reviewed-by:
-
Daniel Vetter authored
Hardware contexts reference a ppgtt, not the other way round. And the only user of this (in debugfs) actually only cares about which file the ppgtt is associated with. So give it what it wants. While at it give the ppgtt create function a proper name&place. Reviewed-by:
-
- 12 Aug, 2014 2 commits
-
-
Daniel Vetter authored
So when reviewing Michel's patch I've noticed a few things and cleaned them up: - The early checks in ppgtt_release are now redundant: The inactive list should always be empty now, so we can ditch these checks. Even for the aliasing ppgtt (though that's a different confusion) since we tear that down after all the objects are gone. - The ppgtt handling functions are splattered all over. Consolidate them in i915_gem_gtt.c, give them OCD prefixes and add wrappers for get/put. - There was a bit a confusion in ppgtt_release about whether it cares about the active or inactive list. It should care about them both, so augment the WARNINGs to check for both. There's still create_vm_for_ctx left to do, put that is blocked on the removal of ppgtt->ctx. Once that's done we can rename it to i915_ppgtt_create and move it to its siblings for handling ppgtts. v2: Move the ppgtt checks into the inline get/put functions as suggested by Chris. v3: Inline the now redundant ppgtt local variable. Cc: Michel Thierry <michel.thierry@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Michel Thierry authored
VMAs should take a reference of the address space they use. Now, when the fd is closed, it will release the ref that the context was holding, but it will still be referenced by any vmas that are still active. ppgtt_release() should then only be called when the last thing referencing it releases the ref, and it can just call the base cleanup and free the ppgtt. Note that with this we will extend the lifetime of ppgtts which contain shared objects. But all the non-shared objects will get removed as soon as they drop of the active list and for the shared ones the shrinker can eventually reap them. Since we currently can't evict ppgtt pagetables either I don't think that temporary leak is important. Signed-off-by:
-
- 11 Aug, 2014 20 commits
-
-
Oscar Mateo authored
The normal flip function places things in the ring in the legacy way, so we either fix that or force MMIO flips always as we do in this patch. Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Fucking again.] Signed-off-by:
-
Oscar Mateo authored
This is what i915_gem_do_execbuffer calls when it wants to execute some worload in an Execlists world. v2: Check arguments before doing stuff in intel_execlists_submission. Also, get rel_constants parsing right. Signed-off-by:
-
Oscar Mateo authored
Dispatch_execbuffer's evil twin. Signed-off-by:
-
Oscar Mateo authored
We need to attend context switch interrupts from all rings. Also, fixed writing IMR/IER and added HWSTAM at ring init time. Notice that, if added to irq_enable_mask, the context switch interrupts would be incorrectly masked out when the user interrupts are due to no users waiting on a sequence number. Therefore, this commit adds a bitmask of interrupts to be kept unmasked at all times. v2: Disable HWSTAM, as suggested by Damien (nobody listens to these interrupts, anyway). v3: Add new get/put_irq functions. Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v2 & v3) Reviewed-by:
-
Oscar Mateo authored
This is a hard one, since there is no direct hardware ring to control when in Execlists. We reuse intel_ring_idle here, but it should be fine as long as i915_add_request does the ring thing. Signed-off-by:
-
Oscar Mateo authored
Same as the legacy-style ring->flush. v2: The BSD invalidate bit still exists in GEN8! Add it for the VCS rings (but still consolidate the blt and bsd ring flushes into one). This was noticed by Brad Volkin. v3: The command for BSD and for other rings is slightly different: get it exactly the same as in gen6_ring_flush + gen6_bsd_ring_flush Signed-off-by:
-
Oscar Mateo authored
Very similar to the legacy add_request, only modified to account for logical ringbuffer. v2: Use MI_GLOBAL_GTT, as suggested by Brad Volkin. v3: Unify render and non-render in the same function, as noticed by Brad Volkin. Signed-off-by:
-
Oscar Mateo authored
Well, new-ish: if all this code looks familiar, that's because it's a clone of the existing submission mechanism (with some modifications here and there to adapt it to LRCs and Execlists). And why did we do this instead of reusing code, one might wonder? Well, there are some fears that the differences are big enough that they will end up breaking all platforms. Also, Execlists offer several advantages, like control over when the GPU is done with a given workload, that can help simplify the submission mechanism, no doubt. I am interested in getting Execlists to work first and foremost, but in the future this parallel submission mechanism will help us to fine tune the mechanism without affecting old gens. v2: Pass the ringbuffer only (whenever possible). Signed-off-by:
-
Ville Syrjälä authored
Don't print raw numbers, use port_name() and tell the user whether it's long or short without having to figure out what the other magic number means. Signed-off-by:
-
Oscar Mateo authored
No mistery here: the seqno is still retrieved from the engine's HW status page (the one in the default context. For the moment, I see no reason to worry about other context's HWS page). Signed-off-by:
-
Oscar Mateo authored
Logical rings do not need most of the initialization their legacy ringbuffer counterparts do: we just need the pipe control object for the render ring, enable Execlists on the hardware and a few workarounds. v2: Squash with: "drm/i915: Extract pipe control fini & make init outside accesible". Signed-off-by:
-
Oscar Mateo authored
Allocate and populate the default LRC for every ring, call gen-specific init/cleanup, init/fini the command parser and set the status page (now inside the LRC object). These are things all engines/rings have in common. Stopping the ring before cleanup and initializing the seqnos is left as a TODO task (we need more infrastructure in place before we can achieve this). v2: Check the ringbuffer backing obj for ring_is_initialized, instead of the context backing obj (similar, but not exactly the same). Signed-off-by:
-
Oscar Mateo authored
Execlists are indeed a brave new world with respect to workload submission to the GPU. In previous version of these series, I have tried to impact the legacy ringbuffer submission path as little as possible (mostly, passing the context around and using the correct ringbuffer when I needed one) but Daniel is afraid (probably with a reason) that these changes and, especially, future ones, will end up breaking older gens. This commit and some others coming next will try to limit the damage by creating an alternative path for workload submission. The first step is here: laying out a new ring init/fini. Signed-off-by:
-
Oscar Mateo authored
As suggested by Daniel Vetter. The idea, in subsequent patches, is to provide an alternative to these vfuncs for the Execlists submission mechanism. v2: Splitted into two and reordered to illustrate our intentions, instead of showing it off. Also, remove the add_request vfunc and added the stop_ring one. Signed-off-by:
-
Oscar Mateo authored
The backing objects and ringbuffers for contexts created via open fd are actually empty until the user starts sending execbuffers to them. At that point, we allocate & populate them. We do this because, at create time, we really don't know which engine is going to be used with the context later on (and we don't want to waste memory on objects that we might never use). v2: As contexts created via ioctl can only be used with the render ring, we have enough information to allocate & populate them right away. v3: Defer the creation always, even with ioctl-created contexts, as requested by Daniel Vetter. Signed-off-by:
-
Oscar Mateo authored
For the most part, logical ring context objects are similar to hardware contexts in that the backing object is meant to be opaque. There are some exceptions where we need to poke certain offsets of the object for initialization, updating the tail pointer or updating the PDPs. For our basic execlist implementation we'll only need our PPGTT PDs, and ringbuffer addresses in order to set up the context. With previous patches, we have both, so start prepping the context to be load. Before running a context for the first time you must populate some fields in the context object. These fields begin 1 PAGE + LRCA, ie. the first page (in 0 based counting) of the context image. These same fields will be read and written to as contexts are saved and restored once the system is up and running. Many of these fields are completely reused from previous global registers: ringbuffer head/tail/control, context control matches some previous MI_SET_CONTEXT flags, and page directories. There are other fields which we don't touch which we may want in the future. v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11) for other engines. v3: Several rebases and general changes to the code. v4: Squash with "Extract LR context object populating" Also, Damien's review comments: - Set the Force Posted bit on the LRI header, as the BSpec suggest we do. - Prevent warning when compiling a 32-bits kernel without HIGHMEM64. - Add a clarifying comment to the context population code. v5: Damien's review comments: - The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted. - Remove dead code. v6: Add a note about the (presumed) differences between BDW and CHV state contexts. Also, Brad's review comments: - Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros. - Be less magical about how we set the ring size in the context. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2) Signed-off-by:
-
Daniel Vetter authored
Any given ringbuffer is unequivocally tied to one context and one engine. By setting the appropriate pointers to them, the ringbuffer struct holds all the infromation you might need to submit a workload for processing, Execlists style. v2: Drop ring->ctx since that looks terribly ill-defined for legacy ringbuffer submission. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v1) Acked-by: Damien Lespiau <damien.lespiau@intel.com> (v2) Signed-off-by: -
Oscar Mateo authored
As we have said a couple of times by now, logical ring contexts have their own ringbuffers: not only the backing pages, but the whole management struct. In a previous version of the series, this was achieved with two separate patches: drm/i915/bdw: Allocate ringbuffer backing objects for default global LRC drm/i915/bdw: Allocate ringbuffer for user-created LRCs Signed-off-by:
-
Oscar Mateo authored
Now that we have the ability to allocate our own context backing objects and we have multiplexed one of them per engine inside the context structs, we can finally allocate and free them correctly. Regarding the context size, reading the register to calculate the sizes can work, I think, however the docs are very clear about the actual context sizes on GEN8, so just hardcode that and use it. v2: Rebased on top of the Full PPGTT series. It is important to notice that at this point we have one global default context per engine, all of them using the aliasing PPGTT (as opposed to the single global default context we have with legacy HW contexts). v3: - Go back to one single global default context, this time with multiple backing objects inside. - Use different context sizes for non-render engines, as suggested by Damien (still hardcoded, since the information about the context size registers in the BSpec is, well, *lacking*). - Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien). - Move default context backing object creation to intel_init_ring (so that we don't waste memory in rings that might not get initialized). v4: - Reuse the HW legacy context init/fini. - Create a separate free function. - Rename the functions with an intel_ preffix. v5: Several rebases to account for the changes in the previous patches. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by:
-
Oscar Mateo authored
A context backing object only makes sense for a given engine (because it holds state data specific to that engine). In legacy ringbuffer sumission mode, the only MI_SET_CONTEXT we really perform is for the render engine, so one backing object is all we nee. With Execlists, however, we need backing objects for every engine, as contexts become the only way to submit workloads to the GPU. To tackle this problem, we multiplex the context struct to contain <no-of-engines> objects. Originally, I colored this code by instantiating one new context for every engine I wanted to use, but this change suggested by Brad Volkin makes it more elegant. v2: Leave the old backing object pointer behind. Daniel Vetter suggested using a union, but it makes more sense to keep rcs_state as a NULL pointer behind, to make sure no one uses it incorrectly when Execlists are enabled, similar to what he suggested for ring->buffer (Rusty's API level 5). v3: Use the name "state" instead of the too-generic "obj", so that it mirrors the name choice for the legacy rcs_state. Signed-off-by:
-
