- 03 Dec, 2020 4 commits
-
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 0ce1822c ("vxlan: add adjacent link to limit depth level") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1606903122-2098-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 72b05b99 ("pasemi_mac: RX/TX ring management cleanup") Fixes: 8d636d8b ("pasemi_mac: jumbo frame support") Reported-by:
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: b1fb1f28 ("cxgb3 - Fix dma mapping error path") Reported-by:
Raju Rangoju <rajur@chelsio.com> Link: https://lore.kernel.org/r/1606902965-1646-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by:
-
Dan Carpenter authored
The .x25_addr[] address comes from the user and is not necessarily NUL terminated. This leads to a couple problems. The first problem is that the strlen() in x25_bind() can read beyond the end of the buffer. The second problem is more subtle and could result in memory corruption. The call tree is: x25_connect() --> x25_write_internal() --> x25_addr_aton() The .x25_addr[] buffers are copied to the "addresses" buffer from x25_write_internal() so it will lead to stack corruption. Verify that the strings are NUL terminated and return -EINVAL if they are not. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Fixes: a9288525 ("X25: Dont let x25_bind use addresses containing characters") Reported-by:"kiyin(尹亮)" <kiyin@tencent.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/X8ZeAKm8FnFpN//B@mwandaSigned-off-by:
-
- 02 Dec, 2020 4 commits
-
-
Yangbo Lu authored
The timestamp fields should be copied to new skb too in A-050385 workaround for later TX timestamping handling. Fixes: 3c68b8ff ("dpaa_eth: FMan erratum A050385 workaround") Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Acked-by:
Camelia Groza <camelia.groza@nxp.com> Link: https://lore.kernel.org/r/20201201075258.1875-1-yangbo.lu@nxp.comSigned-off-by:
-
Antoine Tenart authored
syzkaller managed to crash the kernel using an NBMA ip6gre interface. I could reproduce it creating an NBMA ip6gre interface and forwarding traffic to it: skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:109! Call Trace: skb_push+0x10/0x10 ip6gre_header+0x47/0x1b0 neigh_connected_output+0xae/0xf0 ip6gre tunnel provides its own header_ops->create, and sets it conditionally when initializing the tunnel in NBMA mode. When header_ops->create is used, dev->hard_header_len should reflect the length of the header created. Otherwise, when not used, dev->needed_headroom should be used. Fixes: eb95f52f ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap") Cc: Maria Pasechnik <mariap@mellanox.com> Signed-off-by:
Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.orgSigned-off-by:
-
Eric Dumazet authored
IP_ECN_decapsulate() and IP6_ECN_decapsulate() assume IP header is already pulled. geneve does not ensure this yet. Fixing this generically in IP_ECN_decapsulate() and IP6_ECN_decapsulate() is not possible, since callers pass a pointer that might be freed by pskb_may_pull() syzbot reported : BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:238 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate+0x345/0x1db0 include/net/inet_ecn.h:260 CPU: 1 PID: 8941 Comm: syz-executor.0 Not tainted 5.10.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x5f/0xa0 mm/kmsan/kmsan_instr.c:197 __INET_ECN_decapsulate include/net/inet_ecn.h:238 [inline] INET_ECN_decapsulate+0x345/0x1db0 include/net/inet_ecn.h:260 geneve_rx+0x2103/0x2980 include/net/inet_ecn.h:306 geneve_udp_encap_recv+0x105c/0x1340 drivers/net/geneve.c:377 udp_queue_rcv_one_skb+0x193a/0x1af0 net/ipv4/udp.c:2093 udp_queue_rcv_skb+0x282/0x1050 net/ipv4/udp.c:2167 udp_unicast_rcv_skb net/ipv4/udp.c:2325 [inline] __udp4_lib_rcv+0x399d/0x5880 net/ipv4/udp.c:2394 udp_rcv+0x5c/0x70 net/ipv4/udp.c:2564 ip_protocol_deliver_rcu+0x572/0xc50 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_local_deliver+0x583/0x8d0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:449 [inline] ip_rcv_finish net/ipv4/ip_input.c:428 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_rcv+0x5c3/0x840 net/ipv4/ip_input.c:539 __netif_receive_skb_one_core net/core/dev.c:5315 [inline] __netif_receive_skb+0x1ec/0x640 net/core/dev.c:5429 process_backlog+0x523/0xc10 net/core/dev.c:6319 napi_poll+0x420/0x1010 net/core/dev.c:6763 net_rx_action+0x35c/0xd40 net/core/dev.c:6833 __do_softirq+0x1a9/0x6fa kernel/softirq.c:298 asm_call_irq_on_stack+0xf/0x20 </IRQ> __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline] do_softirq_own_stack+0x6e/0x90 arch/x86/kernel/irq_64.c:77 do_softirq kernel/softirq.c:343 [inline] __local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:195 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32 rcu_read_unlock_bh include/linux/rcupdate.h:730 [inline] __dev_queue_xmit+0x3a9b/0x4520 net/core/dev.c:4167 dev_queue_xmit+0x4b/0x60 net/core/dev.c:4173 packet_snd net/packet/af_packet.c:2992 [inline] packet_sendmsg+0x86f9/0x99d0 net/packet/af_packet.c:3017 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] __sys_sendto+0x9dc/0xc80 net/socket.c:1992 __do_sys_sendto net/socket.c:2004 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2000 __x64_sys_sendto+0x6e/0x90 net/socket.c:2000 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 2d07dc79 ("geneve: add initial netdev driver for GENEVE tunnels") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20201201090507.4137906-1-eric.dumazet@gmail.comSigned-off-by:
-
Toke Høiland-Jørgensen authored
When adding support for propagating ECT(1) marking in IP headers it seems I suffered from endianness-confusion in the checksum update calculation: In fact the ECN field is in the *lower* bits of the first 16-bit word of the IP header when calculating in network byte order. This means that the addition performed to update the checksum field was wrong; let's fix that. Fixes: b7237487 ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040") Reported-by:
Jonathan Morton <chromatix99@gmail.com> Tested-by:
Pete Heist <pete@heistp.net> Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20201130183705.17540-1-toke@redhat.comSigned-off-by:
-
- 01 Dec, 2020 9 commits
-
-
Hoang Le authored
In commit 682cd3cf ("tipc: confgiure and apply UDP bearer MTU on running links"), we introduced a function to change UDP bearer MTU and applied this new value across existing per-link. However, we did not apply this new MTU value at node level. This lead to packet dropped at link level if its size is greater than new MTU value. To fix this issue, we also apply this new MTU value for node level. Fixes: 682cd3cf ("tipc: confgiure and apply UDP bearer MTU on running links") Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20201130025544.3602-1-hoang.h.le@dektech.com.auSigned-off-by:
-
Randy Dunlap authored
The CNIC kconfig symbol selects UIO and UIO depends on MMU. Since 'select' does not follow dependency chains, add the same MMU dependency to CNIC. Quietens this kconfig warning: WARNING: unmet direct dependencies detected for UIO Depends on [n]: MMU [=n] Selected by [m]: - CNIC [=m] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n) Fixes: adfc5217 ("broadcom: Move the Broadcom drivers") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rasesh Mody <rmody@marvell.com> Cc: GR-Linux-NIC-Dev@marvell.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20201129070843.3859-1-rdunlap@infradead.orgSigned-off-by:
-
David S. Miller authored
Thomas Falcon says: ==================== ibmvnic: Bug fixes for queue descriptor processing This series resolves a few issues in the ibmvnic driver's RX buffer and TX completion processing. The first patch includes memory barriers to synchronize queue descriptor reads. The second patch fixes a memory leak that could occur if the device returns a TX completion with an error code in the descriptor, in which case the respective socket buffer and other relevant data structures may not be freed or updated properly. v3: Correct length of Fixes tags, requested by Jakub Kicinski v2: Provide more detailed comments explaining specifically what reads are being ordered, suggested by Michael Ellerman ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Thomas Falcon authored
TX completions received with an error return code are not being processed properly. When an error code is seen, do not proceed to the next completion before cleaning up the existing entry's data structures. Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol") Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Thomas Falcon authored
Ensure that received Subordinate Command-Response Queue (SCRQ) entries are properly read in order by the driver. These queues are used in the ibmvnic device to process RX buffer and TX completion descriptors. dma_rmb barriers have been added after checking for a pending descriptor to ensure the correct descriptor entry is checked and after reading the SCRQ descriptor to ensure the entire descriptor is read before processing. Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol") Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.10-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-30 The first patch is by me an target the tcan4x5x bindings for the m_can driver. It fixes the error path in the tcan4x5x_can_probe() function. The next two patches are by Jeroen Hofstee and makes the lost of arbitration error counters of sja1000 and the sun4i drivers consistent with the other drivers. Zhang Qilong contributes two patch that clean up the error path in the c_can and kvaser_pciefd drivers. * tag 'linux-can-fixes-for-5.10-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: kvaser_pciefd: kvaser_pciefd_open(): fix error handling can: c_can: c_can_power_up(): fix error handling can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an error can: sja1000: sja1000_err(): don't count arbitration lose as an error can: m_can: tcan4x5x_can_probe(): fix error path: remove erroneous clk_disable_unprepare() ==================== Link: https://lore.kernel.org/r/20201130125307.218258-1-mkl@pengutronix.deSigned-off-by:
-
Sven Eckelmann authored
While vxlan doesn't need any extra tailroom, the lowerdev might need it. In that case, copy it over to reduce the chance for additional (re)allocations in the transmit path. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20201126125247.1047977-2-sven@narfation.orgSigned-off-by:
-
Sven Eckelmann authored
It was observed that sending data via batadv over vxlan (on top of wireguard) reduced the performance massively compared to raw ethernet or batadv on raw ethernet. A check of perf data showed that the vxlan_build_skb was calling all the time pskb_expand_head to allocate enough headroom for: min_headroom = LL_RESERVED_SPACE(dst->dev) + dst->header_len + VXLAN_HLEN + iphdr_len; But the vxlan_config_apply only requested needed headroom for: lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM So it completely ignored the needed_headroom of the lower device. The first caller of net_dev_xmit could therefore never make sure that enough headroom was allocated for the rest of the transmit path. Cc: Annika Wickert <annika.wickert@exaring.de> Signed-off-by:
Annika Wickert <aw@awlnx.space> Link: https://lore.kernel.org/r/20201126125247.1047977-1-sven@narfation.orgSigned-off-by:
-
Vinay Kumar Yadav authored
there is kernel panic in inet_twsk_free() while chtls module unload when socket is in TIME_WAIT state because sk_prot_creator was not preserved on connection socket. Fixes: cc35c88a ("crypto : chtls - CPL handler definition") Signed-off-by:
Udai Sharma <udai.sharma@chelsio.com> Signed-off-by:
Vinay Kumar Yadav <vinay.yadav@chelsio.com> Link: https://lore.kernel.org/r/20201125214913.16938-1-vinay.yadav@chelsio.comSigned-off-by:
-
- 30 Nov, 2020 5 commits
-
-
Zhang Qilong authored
If kvaser_pciefd_bus_on() failed, we should call close_candev() to avoid reference leak. Fixes: 26ad340e ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201128133922.3276973-3-zhangqilong3@huawei.comSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Zhang Qilong authored
In the error handling in c_can_power_up(), there are two bugs: 1) c_can_pm_runtime_get_sync() will increase usage counter if device is not empty. Forgetting to call c_can_pm_runtime_put_sync() will result in a reference leak here. 2) c_can_reset_ram() operation will set start bit when enable is true. We should clear it in the error handling. We fix it by adding c_can_pm_runtime_put_sync() for 1), and c_can_reset_ram(enable is false) for 2) in the error handling. Fixes: 82120032 ("can: c_can: Add d_can suspend resume support") Fixes: 52cde85a ("can: c_can: Add d_can raminit support") Signed-off-by:
-
Jeroen Hofstee authored
Losing arbitration is normal in a CAN-bus network, it means that a higher priority frame is being send and the pending message will be retried later. Hence most driver only increment arbitration_lost, but the sun4i driver also incremeants tx_error, causing errors to be reported on a normal functioning CAN-bus. So stop counting them as errors. Fixes: 0738eff1 ("can: Allwinner A10/A20 CAN Controller support - Kernel module") Signed-off-by:
Jeroen Hofstee <jhofstee@victronenergy.com> Link: https://lore.kernel.org/r/20201127095941.21609-1-jhofstee@victronenergy.com [mkl: split into two seperate patches] Signed-off-by:
-
Jeroen Hofstee authored
Losing arbitration is normal in a CAN-bus network, it means that a higher priority frame is being send and the pending message will be retried later. Hence most driver only increment arbitration_lost, but the sja1000 driver also incremeants tx_error, causing errors to be reported on a normal functioning CAN-bus. So stop counting them as errors. Fixes: 8935f57e ("can: sja1000: fix network statistics update") Signed-off-by:
-
Marc Kleine-Budde authored
The clocks mcan_class->cclk and mcan_class->hclk are not prepared by any call during tcan4x5x_can_probe(), so remove erroneous clk_disable_unprepare() on them. Fixes: 5443c226 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Link: http://lore.kernel.org/r/20201130114252.215334-1-mkl@pengutronix.deSigned-off-by:
-
- 28 Nov, 2020 17 commits
-
-
Krzysztof Kozlowski authored
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Fixes: a1a8b459 ("NFC: pn544: i2c: Add DTS Documentation") Fixes: 6be88670 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Fixes: e3b32922 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Rob Herring <robh@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt Link: https://lore.kernel.org/r/20201026153620.89268-1-krzk@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Dany Madden says: ==================== ibmvnic: assorted bug fixes Assorted fixes for ibmvnic originated from "[PATCH net 00/15] ibmvnic: assorted bug fixes" sent by Lijun Pan. ==================== Link: https://lore.kernel.org/r/20201126000432.29897-1-drt@linux.ibm.comSigned-off-by:
-
Dany Madden authored
Reduce the wait time for Command Response Queue response from 30 seconds to 20 seconds, as recommended by VIOS and Power Hypervisor teams. Fixes: bd0b6723 ("ibmvnic: Move login and queue negotiation into ibmvnic_open") Fixes: 53da09e9 ("ibmvnic: Add set_link_state routine for setting adapter link state") Signed-off-by:
Dany Madden <drt@linux.ibm.com> Signed-off-by:
-
Dany Madden authored
Reset timeout is going off right after adapter reset. This patch ensures that timeout is scheduled if it has been 5 seconds since the last reset. 5 seconds is the default watchdog timeout. Fixes: ed651a10 ("ibmvnic: Updated reset handling") Signed-off-by:
-
Dany Madden authored
send_login() does not check for the result of ibmvnic_send_crq() of the login request. This results in the driver needlessly retrying the login 10 times even when CRQ is no longer active. Check the return code and give up in case of errors in sending the CRQ. The only time we want to retry is if we get a PARITALSUCCESS response from the partner. Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol") Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by:
-
Sukadev Bhattiprolu authored
If after ibmvnic sends a LOGIN it gets a FAILOVER, it is possible that the worker thread will start reset process and free the login response buffer before it gets a (now stale) LOGIN_RSP. The ibmvnic tasklet will then try to access the login response buffer and crash. Have ibmvnic track pending logins and discard any stale login responses. Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol") Signed-off-by:
-
Sukadev Bhattiprolu authored
If auto-priority failover is enabled, the backing device needs time to settle if hard resetting fails for any reason. Add a delay of 60 seconds before retrying the hard-reset. Fixes: 2770a798 ("ibmvnic: Introduce hard reset recovery") Signed-off-by:
-
Dany Madden authored
In a failed reset, driver could end up in VNIC_PROBED or VNIC_CLOSED state and cannot recover in subsequent resets, leaving it offline. This patch restores the adapter state to reset_state, the original state when reset was called. Fixes: b27507bb ("net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can run") Fixes: 2770a798 ("ibmvnic: Introduce hard reset recovery") Signed-off-by:
-
Dany Madden authored
scrq->msgs could be NULL during device reset, causing Linux to crash. So, check before memset scrq->msgs. Fixes: c8b2ad0a ("ibmvnic: Sanitize entire SCRQ buffer on reset") Signed-off-by:
Lijun Pan <ljp@linux.ibm.com> Signed-off-by:
-
Dany Madden authored
When ibmvnic fails to reset, it breaks out of the reset loop and frees all of the remaining resets from the workqueue. Doing so prevents the adapter from recovering if no reset is scheduled after that. Instead, have the driver continue to process resets on the workqueue. Remove the no longer need free_all_rwi(). Fixes: ed651a10 ("ibmvnic: Updated reset handling") Signed-off-by:
-
Dany Madden authored
Inconsistent login with the vnicserver is causing the device to be removed. This does not give the device a chance to recover from error state. This patch schedules a FATAL reset instead to bring the adapter up. Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix insufficient validation of IPSET_ATTR_IPADDR_IPV6 reported by syzbot. 2) Remove spurious reports on nf_tables when lockdep gets disabled, from Florian Westphal. 3) Fix memleak in the error path of error path of ip_vs_control_net_init(), from Wang Hai. 4) Fix missing control data in flow dissector, otherwise IP address matching in hardware offload infra does not work. 5) Fix hardware offload match on prefix IP address when userspace does not send a bitwise expression to represent the prefix. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nftables_offload: build mask based from the matching bytes netfilter: nftables_offload: set address type in control dissector ipvs: fix possible memory leak in ip_vs_control_net_init netfilter: nf_tables: avoid false-postive lockdep splat netfilter: ipset: prevent uninit-value in hash_ip6_add ==================== Link: https://lore.kernel.org/r/20201127190313.24947-1-pablo@netfilter.orgSigned-off-by:
-
Davide Caratti authored
a proper kernel configuration for running kselftest can be obtained with: $ yes | make kselftest-merge enable compile support for the 'red' qdisc: otherwise, tdc kselftest fail when trying to run tdc test items contained in red.json. Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/cfa23f2d4f672401e6cebca3a321dd1901a9ff07.1606416464.git.dcaratti@redhat.comSigned-off-by:
-
Guillaume Nault authored
When inet_rtm_getroute() was converted to use the RCU variants of ip_route_input() and ip_route_output_key(), the TOS parameters stopped being masked with IPTOS_RT_MASK before doing the route lookup. As a result, "ip route get" can return a different route than what would be used when sending real packets. For example: $ ip route add 192.0.2.11/32 dev eth0 $ ip route add unreachable 192.0.2.11/32 tos 2 $ ip route get 192.0.2.11 tos 2 RTNETLINK answers: No route to host But, packets with TOS 2 (ECT(0) if interpreted as an ECN bit) would actually be routed using the first route: $ ping -c 1 -Q 2 192.0.2.11 PING 192.0.2.11 (192.0.2.11) 56(84) bytes of data. 64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.173 ms --- 192.0.2.11 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.173/0.173/0.173/0.000 ms This patch re-applies IPTOS_RT_MASK in inet_rtm_getroute(), to return results consistent with real route lookups. Fixes: 3765d35e ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup") Signed-off-by:Guillaume Nault <gnault@redhat.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/b2d237d08317ca55926add9654a48409ac1b8f5b.1606412894.git.gnault@redhat.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2020-11-28 1) Do not reference the skb for xsk's generic TX side since when looped back into RX it might crash in generic XDP, from Björn Töpel. 2) Fix umem cleanup on a partially set up xsk socket when being destroyed, from Magnus Karlsson. 3) Fix an incorrect netdev reference count when failing xsk_bind() operation, from Marek Majtyka. 4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(), from Zhen Lei. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add MAINTAINERS entry for BPF LSM bpftool: Fix error return value in build_btf_type_table net, xsk: Avoid taking multiple skbuff references xsk: Fix incorrect netdev reference count xsk: Fix umem cleanup bug at socket destruct MAINTAINERS: Update XDP and AF_XDP entries ==================== Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.netSigned-off-by:
-
git://git.open-mesh.org/linux-mergeJakub Kicinski authored
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - Fix head/tailroom issues for fragments, by Sven Eckelmann (3 patches) * tag 'batadv-net-pullrequest-20201127' of git://git.open-mesh.org/linux-merge: batman-adv: Don't always reallocate the fragmentation skb head batman-adv: Reserve needed_*room for fragments batman-adv: Consider fragmentation for needed_headroom ==================== Link: https://lore.kernel.org/r/20201127173849.19208-1-sw@simonwunderlich.deSigned-off-by:
-
Antoine Tenart authored
Netfilter changes PACKET_OTHERHOST to PACKET_HOST before invoking the hooks as, while it's an expected value for a bridge, routing expects PACKET_HOST. The change is undone later on after hook traversal. This can be seen with pairs of functions updating skb>pkt_type and then reverting it to its original value: For hook NF_INET_PRE_ROUTING: setup_pre_routing / br_nf_pre_routing_finish For hook NF_INET_FORWARD: br_nf_forward_ip / br_nf_forward_finish But the third case where netfilter does this, for hook NF_INET_POST_ROUTING, the packet type is changed in br_nf_post_routing but never reverted. A comment says: /* We assume any code from br_dev_queue_push_xmit onwards doesn't care * about the value of skb->pkt_type. */ But when having a tunnel (say vxlan) attached to a bridge we have the following call trace: br_nf_pre_routing br_nf_pre_routing_ipv6 br_nf_pre_routing_finish br_nf_forward_ip br_nf_forward_finish br_nf_post_routing <- pkt_type is updated to PACKET_HOST br_nf_dev_queue_xmit <- but not reverted to its original value vxlan_xmit vxlan_xmit_one skb_tunnel_check_pmtu <- a check on pkt_type is performed In this specific case, this creates issues such as when an ICMPv6 PTB should be sent back. When CONFIG_BRIDGE_NETFILTER is enabled, the PTB isn't sent (as skb_tunnel_check_pmtu checks if pkt_type is PACKET_HOST and returns early). If the comment is right and no one cares about the value of skb->pkt_type after br_dev_queue_push_xmit (which isn't true), resetting it to its original value should be safe. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20201123174902.622102-1-atenart@kernel.orgSigned-off-by:
-
- 27 Nov, 2020 1 commit
-
-
Linus Torvalds authored
Merge tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fix from Arnd Bergmann: "Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic. This is a single bugfix for a bug that Stefan Agner found on 32-bit Arm, but that exists on several other architectures" * tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
-
