Take only FIB events that are happening in init_net into account. No other
namespaces are supported.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

zhong jiang says:

====================
net: Use kzfree() directly

With the help of Coccinelle. We find some place to replace.

@@
expression M, S;
@@

- memset(M, 0, S);
- kfree(M);
+ kzfree(M);
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use kzfree instead of memset() + kfree().
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use kzfree instead of memset() + kfree().
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use kzfree() instead of memset() + kfree().
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-5.4-20190903' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2019-09-03

this is a pull request for net-next/master consisting of 15 patches.

The first patch is by Christer Beskow, targets the kvaser_pciefd driver
and fixes the PWM generator's frequency.

The next three patches are by Dan Murphy, the tcan4x5x is updated to use
a proper interrupts/interrupt-parent DT binding to specify the devices
IRQ line. Further the unneeded wake ups of the device is removed from
the driver.

A patch by me for the mcp25xx driver removes the deprecated board file
setup example. Three patches by Andy Shevchenko simplify clock handling,
update the driver from OF to device property API and simplify the
mcp251x_can_suspend() function.

The remaining 7 patches are by me and clean up checkpatch warnings in
the generic CAN device infrastructure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The comment we have is just repeating what the code does.
Include the *reason* for the condition instead.

Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net/tls: minor cleanups

This set is a grab bag of TLS cleanups accumulated in my tree
in an attempt to avoid merge problems with net. Nothing stands
out. First patch dedups context information. Next control path
locking is very slightly optimized. Fourth patch cleans up
ugly #ifdefs.
====================
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If retransmit record hint fall into the cleanup window we will
free it by just walking the list. No need to duplicate the code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS code has a number of #ifdefs which make the code a little
harder to follow. Recent fixes removed the ifdef around the
TLS_HW define, so we can switch to the often used pattern
of defining tls_device functions as empty static inlines
in the header when CONFIG_TLS_DEVICE=n.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On setsockopt path we need to hold device_offload_lock from
the moment we check netdev is up until the context is fully
ready to be added to the tls_device_list.

No need to hold it around the get_netdev_for_sock().
Change the code and remove the confusing comment.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reusing parts of error path for normal exit will make
next commit harder to read, untangle the two.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since we already have the pointer to the full original sk_proto
stored use that instead of storing all individual callback
pointers as well.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IN_MULTICAST's primary intent is as a uapi macro.

Elsewhere in the kernel we use ipv4_is_multicast consistently.

This patch unifies linux's multicast checks to use that function
rather than this macro.
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Variable port_rate is being initialized with a value that is never read
and is being re-assigned a little later on. The assignment is redundant
and hence can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shannon Nelson says:

====================
ionic: Add ionic driver

This is a patch series that adds the ionic driver, supporting the Pensando
ethernet device.

In this initial patchset we implement basic transmit and receive.  Later
patchsets will add more advanced features.

Our thanks to Saeed Mahameed, David Miller, Andrew Lunn, Michal Kubecek,
Jacub Kicinski, Jiri Pirko, Yunsheng Lin, and the ever present kbuild
test robots for their comments and suggestions.

New in v7:
 - stop Tx queue if no descriptor space left after a Tx
 - return ETIMEDOUT if the module data can't be copied out safely
 - remove unnecessary synchronize_irq() before free_irq()
 - use eth_prepare_mac_addr_change() and eth_commit_mac_addr_change() helpers
 - propagate error out of ionic_dl_info_get()

New in v6:
 - added a new patch with devlink info tags for ASIC and general FW
 - use the new devlink info tags in the driver
 - fixed up TxRx cleanup on setup failure
 - allow for possible 0 address from dma mapping of Tx buffers
 - remove a few more unnecessary debugfs error checks
 - use innocuous hardcoded strings in the identify message
 - removed a couple of unused functions and definitions
 - fix a leak in the error handling of port_info setup
 - changed from BUILD_BUG_ON() to static_assert()

New in v5:
 - code reorganized for more sane layout, with a side benefit of getting
   rid of a "defined but not used" complaint after patch 5
 - added "ionic_" prefix to struct definitions and fixed up remaining
   reverse christmas tree formatting (I think I got them all...)
 - ndo_open and ndo_stop reworked for better error recovery
 - interrupt coalescing enabled at driver start
 - unnecessary log messaging removed from events
 - double copy added in the module prom read to assure a clean copy
 - added BQL counting
 - fixed a TSO unmap issue found in testing
 - generalize a bit-flag wait with timeout
 - added devlink into earlier code and dropped patch 19

New in v4:
 - use devlink struct alloc for ionic device specific struct
 - add support for devlink_port
 - fixup devlink fixed vs running version usage
 - use bitmap_copy() instead of memcpy() for link_ksettings
 - don't bother to zero out the advertising bits before copying
   in the support bits
 - drop unknown xcvr types (will be expanded on later)
 - flap the connection to force auto-negotiation
 - use is_power_of_2() rather than open code
 - simplify set/get_pauseparam use of pause->autoneg
 - add a couple comments about NIC status data updated in DMA spaces

New in v3:
 - use le32_to_cpu() on queue_count[] values in debugfs
 - dma_free_coherent() can handle NULL pointers
 - remove unused SS_TEST from ethtool handlers
 - one more case of stop the tx ring if there is no room
 - remove a couple of stray // comments

New in v2:
 - removed debugfs error checking and cut down on debugfs use
 - remove redundant bounds checking on incoming values for mtu and ethtool
 - don't alloc rx_filter memory until the match type has been checked
 - free the ionic struct on remove
 - simplified link_up and netif_carrier_ok comparison
 - put stats into ethtool -S, out of debugfs
 - moved dev_cmd and dev_info dumping to ethtool -d, out of debugfs
 - added devlink support
 - used kernel's rss init routines rather than open code
 - set the Kbuild dependant on 64BIT
 - cut down on some unnecessary log messaging
 - cleaned up ionic_get_link_ksettings
 - cleaned up other little code bits here and there
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Interrupt coalescing, tunable copybreak value, and
tx timeout.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add code to manipulate through ethtool the RSS configuration
used by the NIC.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add in the detailed statistics for ethtool -S that the driver
keeps as it processes packets.  Display of the additional
debug statistics can be enabled through the ethtool priv-flags
feature.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the netdev gets a new name from userland, pass that name
down to the NIC for internal tracking.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add both the Tx and Rx queue setup and handling.  The related
stats display comes later.  Instead of using the generic napi
routines used by the slow-path commands, the Tx and Rx paths
are simplified and inlined in one file in order to get better
compiler optimizations.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add in the basic ethtool callbacks for device information
and control.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add code to handle the link status event, and wire up the
basic netdev hardware stats.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the Rx filtering and rx_mode NDO callbacks.  Also add
the deferred work thread handling needed to manage the filter
requests outside of the netif_addr_lock spinlock.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set up the infrastructure for managing Rx filters.  We can't ask the
hardware for what filters it has, so we keep a local list of filters
that we've pushed into the HW.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set up the initial NDO structure and callbacks for netdev
to use, and register the netdev.  This will allow us to do
a few basic operations on the device, but no traffic yet.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The AdminQ is fine for sending messages and requests to the NIC,
but we also need to have events published from the NIC to the
driver.  The NotifyQ handles this for us, using the same interrupt
as AdminQ.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add AdminQ specific message requests and completion handling.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most of the NIC configuration happens through the AdminQ message
queue.  NAPI is used for basic interrupt handling and message
queue management.  These routines are set up to be shared among
different types of queues when used in slow-path handling.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ionic interrupt model is based on interrupt control blocks
accessed through the PCI BAR.  Doorbell registers are used by
the driver to signal to the NIC that requests are waiting on
the message queues.  Interrupts are used by the NIC to signal
to the driver that answers are waiting on the completion queues.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The LIF is the Logical Interface, which represents the external
connections.  The NIC can multiplex many LIFs to a single port,
but in most setups, LIF0 is the primary control for the port.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The port management commands apply to the physical port
associated with the PCI device, which might be shared among
several logical interfaces.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ionic device has a small set of PCI registers, including a
device control and data space, and a large set of message
commands.

Also adds new DEVLINK_INFO_VERSION_GENERIC tags for
ASIC_ID, ASIC_REV, and FW.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a basic driver framework for the Pensando IONIC
network device.  There is no functionality right now other than
the ability to load and unload.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current tag set is still rather small and needs a couple
more tags to help with ASIC identification and to have a
more generic FW version.

Cc: Jiri Pirko <jiri@resnulli.us>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

René van Dorst says:

====================
net: dsa: mt7530: Convert to PHYLINK and add support for port 5

1. net: dsa: mt7530: Convert to PHYLINK API
   This patch converts mt7530 to PHYLINK API.
2. dt-bindings: net: dsa: mt7530: Add support for port 5
3. net: dsa: mt7530: Add support for port 5
   These 2 patches adding support for port 5 of the switch.

v2->v3:
 * Removed 'status = "okay"' lines in patch #2
 * Change a port 5 setup message in a debug message in patch #3
 * Added ack-by and tested-by tags
v1->v2:
 * Mostly phylink improvements after review.
rfc -> v1:
 * Mostly phylink improvements after review.
 * Drop phy isolation patches. Adds no value for now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding support for port 5.

Port 5 can muxed/interface to:
- internal 5th GMAC of the switch; can be used as 2nd CPU port or as
  extra port with an external phy for a 6th ethernet port.
- internal PHY of port 0 or 4; Used in most applications so that port 0
  or 4 is the WAN port and interfaces with the 2nd GMAC of the SOC.
Signed-off-by: René van Dorst <opensource@vdorst.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

MT7530 port 5 has many modes/configurations.
Update the documentation how to use port 5.
Signed-off-by: René van Dorst <opensource@vdorst.com>
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert mt7530 to PHYLINK API
Signed-off-by: René van Dorst <opensource@vdorst.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

First, for AUTONEG_DISABLE, we only need to modify MII_BMCR.

Second, add advertising parameter for rtl8152_set_speed(). Add
RTL_ADVERTISED_xxx for advertising parameter of rtl8152_set_speed().
Then, the advertising settings from ethtool could be saved.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>