Pull KVM fixes from Radim Krčmář:
 "PPC:
   - Fix bug which could leave locks held in the host on return to a
     guest.

  x86:
   - Prevent infinitely looping emulation of a failing syscall while
     single stepping.

   - Do not crash the host when nesting is disabled"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Don't update RIP or do single-step on faulting emulation
  KVM: x86: hyper-v: don't crash on KVM_GET_SUPPORTED_HV_CPUID when kvm_intel.nested is disabled
  KVM: PPC: Book3S: Fix incorrect guest-to-user-translation error handling

Merge misc mm fixes from Andrew Morton:
 "7 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: memcontrol: fix percpu vmstats and vmevents flush
  mm, memcg: do not set reclaim_state on soft limit reclaim
  mailmap: add aliases for Dmitry Safonov
  mm/z3fold.c: fix lock/unlock imbalance in z3fold_page_isolate
  mm, memcg: partially revert "mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones"
  mm/zsmalloc.c: fix build when CONFIG_COMPACTION=n
  mm: memcontrol: flush percpu slab vmstats on kmem offlining

Pull crypto fix from Herbert Xu:
 "Fix a potential crash in the ccp driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ccp - Ignore unconfigured CCP device on suspend/resume

Commit dfe2a77f ("kfifo: fix kfifo_alloc() and kfifo_init()") made
the kfifo code round the number of elements up.  That was good for
__kfifo_alloc(), but it's actually wrong for __kfifo_init().

The difference? __kfifo_alloc() will allocate the rounded-up number of
elements, but __kfifo_init() uses an allocation done by the caller.  We
can't just say "use more elements than the caller allocated", and have
to round down.

The good news? All the normal cases will be using power-of-two arrays
anyway, and most users of kfifo's don't use kfifo_init() at all, but one
of the helper macros to declare a KFIFO that enforce the proper
power-of-two behavior.  But it looks like at least ibmvscsis might be
affected.

The bad news? Will Deacon refers to an old thread and points points out
that the memory ordering in kfifo's is questionable.  See

  https://lore.kernel.org/lkml/20181211034032.32338-1-yuleixzhang@tencent.com/

for more.

Fixes: dfe2a77f ("kfifo: fix kfifo_alloc() and kfifo_init()")
Reported-by: laokz <laokz@foxmail.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Instead of using raw_cpu_read() use per_cpu() to read the actual data of
the corresponding cpu otherwise we will be reading the data of the
current cpu for the number of online CPUs.

Link: http://lkml.kernel.org/r/20190829203110.129263-1-shakeelb@google.com
Fixes: bb65f89b ("mm: memcontrol: flush percpu vmevents before releasing memcg")
Fixes: c350a99e ("mm: memcontrol: flush percpu vmstats before releasing memcg")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Adric Blake has noticed[1] the following warning:

  WARNING: CPU: 7 PID: 175 at mm/vmscan.c:245 set_task_reclaim_state+0x1e/0x40
  [...]
  Call Trace:
   mem_cgroup_shrink_node+0x9b/0x1d0
   mem_cgroup_soft_limit_reclaim+0x10c/0x3a0
   balance_pgdat+0x276/0x540
   kswapd+0x200/0x3f0
   ? wait_woken+0x80/0x80
   kthread+0xfd/0x130
   ? balance_pgdat+0x540/0x540
   ? kthread_park+0x80/0x80
   ret_from_fork+0x35/0x40
  ---[ end trace 727343df67b2398a ]---

which tells us that soft limit reclaim is about to overwrite the
reclaim_state configured up in the call chain (kswapd in this case but
the direct reclaim is equally possible).  This means that reclaim stats
would get misleading once the soft reclaim returns and another reclaim
is done.

Fix the warning by dropping set_task_reclaim_state from the soft reclaim
which is always called with reclaim_state set up.

[1] http://lkml.kernel.org/r/CAE1jjeePxYPvw1mw2B3v803xHVR_BNnz0hQUY_JDMN8ny29M6w@mail.gmail.com

Link: http://lkml.kernel.org/r/20190828071808.20410-1-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Adric Blake <promarbler14@gmail.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I don't work for Virtuozzo or Samsung anymore and I've noticed that they
have started sending annoying html email-replies.

And I prioritize my personal emails over work email box, so while at it
add an entry for Arista too - so I can reply faster when needed.

Link: http://lkml.kernel.org/r/20190827220346.11123-1-dima@arista.comSigned-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix lock/unlock imbalance by unlocking *zhdr* before return.

Addresses Coverity ID 1452811 ("Missing unlock")

Link: http://lkml.kernel.org/r/20190826030634.GA4379@embeddedor
Fixes: d776aaa9 ("mm/z3fold.c: fix race between migration and destruction")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, memcg: partially revert "mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones"

Commit 766a4c19 ("mm/memcontrol.c: keep local VM counters in sync
with the hierarchical ones") effectively decreased the precision of
per-memcg vmstats_local and per-memcg-per-node lruvec percpu counters.

That's good for displaying in memory.stat, but brings a serious
regression into the reclaim process.

One issue I've discovered and debugged is the following:
lruvec_lru_size() can return 0 instead of the actual number of pages in
the lru list, preventing the kernel to reclaim last remaining pages.
Result is yet another dying memory cgroups flooding.  The opposite is
also happening: scanning an empty lru list is the waste of cpu time.

Also, inactive_list_is_low() can return incorrect values, preventing the
active lru from being scanned and freed.  It can fail both because the
size of active and inactive lists are inaccurate, and because the number
of workingset refaults isn't precise.  In other words, the result is
pretty random.

I'm not sure, if using the approximate number of slab pages in
count_shadow_number() is acceptable, but issues described above are
enough to partially revert the patch.

Let's keep per-memcg vmstat_local batched (they are only used for
displaying stats to the userspace), but keep lruvec stats precise.  This
change fixes the dead memcg flooding on my setup.

Link: http://lkml.kernel.org/r/20190817004726.2530670-1-guro@fb.com
Fixes: 766a4c19 ("mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes: 701d6785 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool")
Link: http://lkml.kernel.org/r/201908251039.5oSbEEUT%25lkp@intel.comReported-by: kbuild test robot <lkp@intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I've noticed that the "slab" value in memory.stat is sometimes 0, even
if some children memory cgroups have a non-zero "slab" value.  The
following investigation showed that this is the result of the kmem_cache
reparenting in combination with the per-cpu batching of slab vmstats.

At the offlining some vmstat value may leave in the percpu cache, not
being propagated upwards by the cgroup hierarchy.  It means that stats
on ancestor levels are lower than actual.  Later when slab pages are
released, the precise number of pages is substracted on the parent
level, making the value negative.  We don't show negative values, 0 is
printed instead.

To fix this issue, let's flush percpu slab memcg and lruvec stats on
memcg offlining.  This guarantees that numbers on all ancestor levels
are accurate and match the actual number of outstanding slab pages.

Link: http://lkml.kernel.org/r/20190819202338.363363-3-guro@fb.com
Fixes: fb2f2b0a ("mm: memcg/slab: reparent memcg kmem_caches on cgroup removal")
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM fixes from Russell King:
 "Three fixes for ARM this time around:

   - A fix for update_sections_early() to cope with NULL ->mm pointers.

   - A correction to the backtrace code to allow proper backtraces.

   - Reinforcement of pfn_valid() with PFNs >= 4GiB"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8901/1: add a criteria for pfn_valid of arm
  ARM: 8897/1: check stmfd instruction using right shift
  ARM: 8874/1: mm: only adjust sections of valid mm structures

If check_cached_key() returns a non-NULL value, we still need to call
key_type::match_free() to undo key_type::match_preparse().

Fixes: 7743c48e ("keys: Cache result of request_key*() temporarily in task_struct")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "The majority of the fixes this time are for OMAP hardware, here is a
  breakdown of the significant changes:

  Various device tree bug fixes:
   - TI am57xx boards need a voltage level fix to avoid damaging SD
     cards
   - vf610-bk4 fails to detect its flash due to an incorrect description
   - meson-g12a USB phy configuration fails
   - meson-g12b reboot should not power off the SD card
   - Some corrections for apparently harmless differences from the
     documentation.

  Regression fixes:
   - ams-delta FIQ interrupts broke in 5.3
   - TI am3/am4 mmc controllers broke in 5.2

  The logic_pio driver (used on some Huawei ARM servers) got a few bug
  fixes for reliability.

  And a couple of compile-time warning fixes"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
  soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST
  soc: ti: pm33xx: Make two symbols static
  soc: ti: pm33xx: Fix static checker warnings
  ARM: OMAP: dma: Mark expected switch fall-throughs
  ARM: dts: Fix incomplete dts data for am3 and am4 mmc
  bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()
  ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
  ARM: dts: dra74x: Fix iodelay configuration for mmc3
  ARM: dts: am335x: Fix UARTs length
  ARM: OMAP2+: Fix omap4 errata warning on other SoCs
  bus: hisi_lpc: Add .remove method to avoid driver unbind crash
  bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
  lib: logic_pio: Add logic_pio_unregister_range()
  lib: logic_pio: Avoid possible overlap for unregistering regions
  lib: logic_pio: Fix RCU usage
  arm64: dts: amlogic: odroid-n2: keep SD card regulator always on
  arm64: dts: meson-g12a-sei510: enable IR controller
  arm64: dts: meson-g12a: add missing dwc2 phy-names
  ARM: dts: vf610-bk4: Fix qspi node description
  ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7
  ...

Pull rdma fix from Doug Ledford:
 "Much calmer week this week.  Just one patch queued up:

  The way the siw driver was locking around the traversal of the list of
  ipv6 addresses on a device was causing a scheduling while atomic
  issue. Bernard straightened it out by using the rtnl_lock"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/siw: Fix IPv6 addr_list locking

Pull two ceph fixes from Ilya Dryomov:
 "A fix for a -rc1 regression in rbd and a trivial static checker fix"

* tag 'ceph-for-5.3-rc7' of git://github.com/ceph/ceph-client:
  rbd: restore zeroing past the overlap when reading from parent
  libceph: don't call crypto_free_sync_skcipher() on a NULL tfm

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix init of SD cards reporting an invalid VDD range

  MMC host:
   - sprd: Fixes for clocks, card-detect, write-protect etc
   - cadence: Fix ADMA 64-bit addressing
   - tegra: Re-allow writing to SD card when GPIO pin is absent
   - at91: Fix eMMC init by clearing HS200 cap as it's not supported"

* tag 'mmc-v5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-cadence: enable v4_mode to fix ADMA 64-bit addressing
  mmc: sdhci-sprd: clear the UHS-I modes read from registers
  mms: sdhci-sprd: add SDHCI_QUIRK_BROKEN_CARD_DETECTION
  mmc: sdhci-sprd: add SDHCI_QUIRK2_PRESET_VALUE_BROKEN
  mmc: sdhci-sprd: add get_ro hook function
  mmc: sdhci-sprd: fixed incorrect clock divider
  mmc: core: Fix init of SD cards reporting an invalid VDD range
  mmc: sdhci-of-at91: add quirk for broken HS200
  Revert "mmc: sdhci-tegra: drop ->get_ro() implementation"

Pull drm fixes from Dave Airlie:
 "Nothing too crazy, there's probably more patches than I'd like at this
  stage, but they are all pretty self contained:

  amdgpu:
   - Fix GFXOFF regression for PCO and RV2
   - Fix missing fence reference
   - Fix VG20 power readings on certain SMU firmware versions
   - Fix dpm level setup for VG20
   - Add an ATPX laptop quirk

  i915:
   - Fix DP MST max BPC property creation after DRM register
   - Fix unused ggtt deballooning and NULL dereference in guest
   - Fix DSC eDP transcoder identification
   - Fix WARN from DMA API debug by setting DMA max segment size

  qxl:
   - Make qxl reservel the vga ports using vgaargb to prevent switching to vga compatibility mode.

  omap:
   - Fix omap port lookup for SDI output

  virtio:
   - Use virtio_max_dma_size to fix an issue with swiotlb.

  komeda:
   - Compiler fixes to komeda.
   - Add missing of_node_get() call in komeda.
   - Reorder the komeda de-init functions"

* tag 'drm-fixes-2019-08-30' of git://anongit.freedesktop.org/drm/drm:
  drm/komeda: Reordered the komeda's de-init functions
  drm/amdgpu: fix GFXOFF on Picasso and Raven2
  drm/amdgpu: Add APTX quirk for Dell Latitude 5495
  drm/amd/powerplay: correct Vega20 dpm level related settings
  drm/i915: Call dma_set_max_seg_size() in i915_driver_hw_probe()
  drm/i915/dp: Fix DSC enable code to use cpu_transcoder instead of encoder->type
  drm/i915: Don't deballoon unused ggtt drm_mm_node in linux guest
  drm/i915: Do not create a new max_bpc prop for MST connectors
  drm/powerplay: Fix Vega20 power reading again
  drm/powerplay: Fix Vega20 Average Power value v4
  drm/amdgpu: fix dma_fence_wait without reference
  drm/komeda: Add missing of_node_get() call
  drm/komeda: Clean warning 'komeda_component_add' might be a candidate for 'gnu_printf'
  drm/komeda: Fix warning -Wunused-but-set-variable
  drm/komeda: Fix error: not allocating enough data 1592 vs 1584
  drm/virtio: use virtio_max_dma_size
  drm/omap: Fix port lookup for SDI output
  drm/qxl: get vga ioports

The IP datasheet says this controller is compatible with SD Host
Specification Version v4.00.

As it turned out, the ADMA of this IP does not work with 64-bit mode
when it is in the Version 3.00 compatible mode; it understands the
old 64-bit descriptor table (as defined in SDHCI v2), but the ADMA
System Address Register (SDHCI_ADMA_ADDRESS) cannot point to the
64-bit address.

I noticed this issue only after commit bd2e7563 ("dma-contiguous:
use fallback alloc_pages for single pages"). Prior to that commit,
dma_set_mask_and_coherent() returned the dma address that fits in
32-bit range, at least for the default arm64 configuration
(arch/arm64/configs/defconfig). Now the host->adma_addr exceeds the
32-bit limit, causing the real problem for the Socionext SoCs.
(As a side-note, I was also able to reproduce the issue for older
kernels by turning off CONFIG_DMA_CMA.)

Call sdhci_enable_v4_mode() to fix this.

Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

sprd's sd host controller supports SDR50/SDR104/DDR50 though, the UHS-I
mode used by the specific card can be selected via devicetree only.

Fixes: fb8bd90f ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

sprd's sd host controller doesn't support detection to
card insert or remove.

Fixes: fb8bd90f ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The bit of PRESET_VAL_ENABLE in HOST_CONTROL2 register is reserved on
sprd's sd host controller, set quirk2 to disable configuring this.

Fixes: fb8bd90f ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

sprd's sd host controller doesn't support write protect to sd card.

Fixes: fb8bd90f ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The register SDHCI_CLOCK_CONTROL should be cleared before config clock
divider, otherwise the frequency configured maybe lower than we
expected.

Fixes: fb8bd90f ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The OCR register defines the supported range of VDD voltages for SD cards.
However, it has turned out that some SD cards reports an invalid voltage
range, for example having bit7 set.

When a host supports MMC_CAP2_FULL_PWR_CYCLE and some of the voltages from
the invalid VDD range, this triggers the core to run a power cycle of the
card to try to initialize it at the lowest common supported voltage.
Obviously this fails, since the card can't support it.

Let's fix this problem, by clearing invalid bits from the read OCR register
for SD cards, before proceeding with the VDD voltage negotiation.

Cc: stable@vger.kernel.org
Reported-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Philip Langdale <philipl@overt.org>
Tested-by: Philip Langdale <philipl@overt.org>
Tested-by: Manuel Presnitz <mail@mpy.de>

Merge tag 'drm-intel-fixes-2019-08-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.3-rc7:
- Fix DP MST max BPC property creation after DRM register
- Fix unused ggtt deballooning and NULL dereference in guest
- Fix DSC eDP transcoder identification
- Fix WARN from DMA API debug by setting DMA max segment size
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a7bseati.fsf@intel.com

drm-fixes-5.3-2019-08-28:

amdgpu:
- Fix GFXOFF regression for PCO and RV2
- Fix missing fence reference
- Fix VG20 power readings on certain SMU firmware versions
- Fix dpm level setup for VG20
- Add an ATPX laptop quirk
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829022925.32678-1-alexander.deucher@amd.com

Pull cifs fixes from Steve French:
 "A few small SMB3 fixes, and a larger one to fix various older string
  handling functions"

* tag '5.3-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  cifs: replace various strncpy with strscpy and similar
  cifs: Use kzfree() to zero out the password
  cifs: set domainName when a domain-key is used in multiuser

drm-misc-fixes for v5.3 (rc7?):
- Make qxl reservel the vga ports using vgaargb to prevent switching to vga compatibility mode.
- Fix omap port lookup for SDI output
- Use virtio_max_dma_size to fix an issue with swiotlb.
- Compiler fixes to komeda.
- Add missing of_node_get() call in komeda.
- Reorder the komeda de-init functions.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f187c28b-6279-2c4f-3e53-296ee899133b@linux.intel.com

Merge tag 'Wimplicit-fallthrough-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull fallthrough fixes from Gustavo A. R. Silva:
 "Fix fall-through warnings on arc and nds32 for multiple
  configurations"

* tag 'Wimplicit-fallthrough-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  nds32: Mark expected switch fall-throughs
  ARC: unwind: Mark expected switch fall-through

Pull mtd fix from Miquel Raynal:
 "Add a 'depends on' in the core Hyperbus Kconfig entry to avoid build
  errors"

* tag 'mtd/fixes-for-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: hyperbus: fix dependency and build error

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings (Building: allmodconfig nds32):

include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/nds32/kernel/signal.c:362:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/nds32/kernel/signal.c:315:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings (Building: haps_hs_defconfig arc):

arch/arc/kernel/unwind.c: In function ‘read_pointer’:
./include/linux/compiler.h:328:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
  do {        \
     ^
./include/linux/compiler.h:338:2: note: in expansion of macro ‘__compiletime_assert’
  __compiletime_assert(condition, msg, prefix, suffix)
  ^~~~~~~~~~~~~~~~~~~~
./include/linux/compiler.h:350:2: note: in expansion of macro ‘_compiletime_assert’
  _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
  ^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
 #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
                                     ^~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
  BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
  ^~~~~~~~~~~~~~~~
arch/arc/kernel/unwind.c:573:3: note: in expansion of macro ‘BUILD_BUG_ON’
   BUILD_BUG_ON(sizeof(u32) != sizeof(value));
   ^~~~~~~~~~~~
arch/arc/kernel/unwind.c:575:2: note: here
  case DW_EH_PE_native:
  ^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

The move of the IXP4xx SoC drivers exposed their config options on all
platforms.

Fix this by wrapping them inside an ARCH_IXP4XX or COMPILE_TEST block.

Link: https://lore.kernel.org/r/20190823090352.12243-1-linus.walleij@linaro.org
Fixes: fcf2d897 ("ARM: ixp4xx: Move NPE and QMGR to drivers/soc")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes

A single patch to change my MAINTAINERS address

* tag 'sunxi-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  MAINTAINERS: Update my email address

Link: https://lore.kernel.org/r/8c04a96b-4a75-4e1f-b3ac-05fe091f251e.lettre@localhostSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Hisilicon fixes for v5.3-rc

- Fixed RCU usage in logical PIO
- Added a function to unregister a logical PIO range in logical PIO
  to support the fixes in the hisi-lpc driver
- Fixed and optimized hisi-lpc driver to avoid potential use-after-free
  and driver unbind crash

* tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi:
  bus: hisi_lpc: Add .remove method to avoid driver unbind crash
  bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
  lib: logic_pio: Add logic_pio_unregister_range()
  lib: logic_pio: Avoid possible overlap for unregistering regions
  lib: logic_pio: Fix RCU usage

Link: https://lore.kernel.org/r/5D562335.7000902@hisilicon.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

lib/devres.c, which implements devm_ioremap_resource(), is only built
when CONFIG_HAS_IOMEM is set/enabled, so MTD_HYPERBUS should depend
on HAS_IOMEM.  Fixes a build error and a Kconfig warning (as seen on
UML builds):

WARNING: unmet direct dependencies detected for MTD_COMPLEX_MAPPINGS
  Depends on [n]: MTD [=m] && HAS_IOMEM [=n]
  Selected by [m]:
  - MTD_HYPERBUS [=m] && MTD [=m]

ERROR: "devm_ioremap_resource" [drivers/mtd/hyperbus/hyperbus-core.ko] undefined!

Fixes: dcc7d344 ("mtd: Add support for HyperBus memory devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-mtd@lists.infradead.org
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

pfn_valid can be wrong when parsing a invalid pfn whose phys address
exceeds BITS_PER_LONG as the MSB will be trimed when shifted.

The issue originally arise from bellowing call stack, which corresponding to
an access of the /proc/kpageflags from userspace with a invalid pfn parameter
and leads to kernel panic.

[46886.723249] c7 [<c031ff98>] (stable_page_flags) from [<c03203f8>]
[46886.723264] c7 [<c0320368>] (kpageflags_read) from [<c0312030>]
[46886.723280] c7 [<c0311fb0>] (proc_reg_read) from [<c02a6e6c>]
[46886.723290] c7 [<c02a6e24>] (__vfs_read) from [<c02a7018>]
[46886.723301] c7 [<c02a6f74>] (vfs_read) from [<c02a778c>]
[46886.723315] c7 [<c02a770c>] (SyS_pread64) from [<c0108620>]
(ret_fast_syscall+0x0/0x28)
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Pull arm64 fixes from Will Deacon:
 "Hot on the heels of our last set of fixes are a few more for -rc7.

  Two of them are fixing issues with our virtual interrupt controller
  implementation in KVM/arm, while the other is a longstanding but
  straightforward kallsyms fix which was been acked by Masami and
  resolves an initialisation failure in kprobes observed on arm64.

   - Fix GICv2 emulation bug (KVM)

   - Fix deadlock in virtual GIC interrupt injection code (KVM)

   - Fix kprobes blacklist init failure due to broken kallsyms lookup"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI
  KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is long
  kallsyms: Don't let kallsyms_lookup_size_offset() fail on retrieving the first symbol

The de-init routine should be doing the following in order:-
1. Unregister the drm device
2. Shut down the crtcs - failing to do this might cause a connector leakage
See the 'commit 109c4d18 ("drm/arm/malidp: Ensure that the crtcs are
shutdown before removing any encoder/connector")'
3. Disable the interrupts
4. Unbind the components
5. Free up DRM mode_config info

Changes from v1:-
1. Re-ordered the header files inclusion
2. Rebased on top of the latest drm-misc-fixes
Signed-off-by: . Ayan Kumar Halder <Ayan.Halder@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/327606/