- 13 Apr, 2023 1 commit
-
-
Tejun Heo authored
Now that all RCU flavors have been combined either holding a spin lock, disabling irq or disabling preemption implies RCU read lock, so there's no need to use rcu_read_[un]lock() explicitly while holding queue_lock. This shouldn't cause any behavior changes. v2: Description updated. Leave __acquires/release on queue_lock alone. Signed-off-by:
Tejun Heo <tj@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230413000649.115785-2-tj@kernel.orgSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 12 Apr, 2023 7 commits
-
-
Stefan Haberland authored
The DASD driver does not kick the requeue list when requeuing IO requests to the blocklayer. This might lead to hanging blockdevice when there is no other trigger for this. Fix by automatically kick the requeue list when requeuing DASD requests to the blocklayer. Fixes: e443343e ("s390/dasd: blk-mq conversion") CC: stable@vger.kernel.org # 4.14+ Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by:
Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.comSigned-off-by:
-
Stefan Haberland authored
Add a check for errors in the start_io function that signal a not working device. Trigger an autoquiesce event in that case. Signed-off-by:
-
Stefan Haberland authored
Add a sysfs attribute aq_timeouts that controls after how many timeouts a autoquiesce event might be triggered. The default value is 32768 which is the maximum number of retries for the DASD device driver DASD_RETRIES_MAX. This means that the timeout trigger will never happen. The default value for DASD retries is 255. Setting the value to below 255 will trigger the timeout autoquiesce event before an IO error is generated. Also add the check for the configured amount of timeouts and trigger an autoquiesce event if exceeded. Signed-off-by:
-
Stefan Haberland authored
Add a sysfs attribute to control if all IO requests will be requeued to the blocklayer in case of an autoquiesce event or not. A value of 1 means that in case of an autoquiesce event all IO requests will be requeued to the blocklayer. A value of 0 means that the device will only be stopped. Signed-off-by:
-
Stefan Haberland authored
Add sysfs attribute that controls the DASD autoquiesce feature. The autoquiesce is disabled when 0 is echoed to the attribute. A value greater than 0 will enable the feature. The aq_mask attribute will accept an unsigned integer and the value will be interpreted as bitmask defining the trigger events that will lead to an automatic quiesce. The following autoquiesce triggers will currently be available: DASD_EER_FATALERROR 1 - any final I/O error DASD_EER_NOPATH 2 - no remaining paths for the device DASD_EER_STATECHANGE 3 - a state change interrupt occurred DASD_EER_PPRCSUSPEND 4 - the device is PPRC suspended DASD_EER_NOSPC 5 - there is no space remaining on an ESE device DASD_EER_TIMEOUT 6 - a certain amount of timeouts occurred DASD_EER_STARTIO 7 - the IO start function encountered an error The currently supported maximum value is 255. Bit 31 is reserved for internal usage. Bit 0 is not used. Example: - deactivate autoquiesce $ echo 0 > /sys/bus/ccw/0.0.1234/aq_mask - enable autoquiesce for FATALERROR, NOPATH and TIMEOUT (0000 0000 0000 0000 0000 0000 0100 0110 => 70) $ echo 70 > /sys/bus/ccw/0.0.1234/aq_mask Signed-off-by:
-
Stefan Haberland authored
Add the internal logic to check for autoquiesce triggers and handle them. Quiesce and resume are functions that tell Linux to stop/resume issuing I/Os to a specific DASD. The DASD driver allows a manual quiesce/resume via ioctl. Autoquiesce will define an amount of triggers that will lead to an automatic quiesce if a certain event occurs. There is no automatic resume. All events will be reported via DASD Extended Error Reporting (EER) if configured. Signed-off-by:
-
Stefan Haberland authored
Remove definitions that have never been used. Signed-off-by:
-
- 06 Apr, 2023 3 commits
-
-
Chengming Zhou authored
blkcg_policy cpd_init_fn() is used to just initialize some default fields of policy data, which is enough to do in cpd_alloc_fn(). This patch delete the only user bfq_cpd_init(), and remove cpd_init_fn from blkcg_policy. Signed-off-by:
Chengming Zhou <zhouchengming@bytedance.com> Acked-by:
-
Chengming Zhou authored
cpd_bind_fn is just used for update default weight when block subsys attached to a hierarchy. No any policy need it anymore. Signed-off-by:
-
Chengming Zhou authored
BFQ_WEIGHT_LEGACY_DFL is the same as CGROUP_WEIGHT_DFL, which means we don't need cpd_bind_fn() callback to update default weight when attached to a hierarchy. This patch remove BFQ_WEIGHT_LEGACY_DFL and cpd_bind_fn(). Signed-off-by:
-
- 05 Apr, 2023 5 commits
-
-
Ondrej Kozina authored
It returns following attributes: locking range start locking range length read lock enabled write lock enabled lock state (RW, RO or LK) It can be retrieved by user authority provided the authority was added to locking range via prior IOC_OPAL_ADD_USR_TO_LR ioctl command. The command was extended to add user in ACE that allows to read attributes listed above. Signed-off-by:
Ondrej Kozina <okozina@redhat.com> Tested-by:
Luca Boccassi <bluca@debian.org> Tested-by:
Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20230405111223.272816-6-okozina@redhat.comSigned-off-by:
-
Ondrej Kozina authored
Refactors current code querying single column to use the new helper. Real multi column usage will be added later. Signed-off-by:
Christian Brauner <brauner@kernel.org> Reviewed-by:
-
Ondrej Kozina authored
Extend ACE set of locking range attributes accessible to user authority. This patch allows user authority to get following locking range attribues when user get added to locking range via IOC_OPAL_ADD_USR_TO_LR: locking range start locking range end read lock enabled write lock enabled read locked write locked lock on reset active key Note: Admin1 authority always remains in the ACE. Otherwise it breaks current userspace expecting Admin1 in the ACE (sedutils). See TCG OPAL2 s.4.3.1.7 "ACE_Locking_RangeNNNN_Get_RangeStartToActiveKey". Signed-off-by:
-
Ondrej Kozina authored
Move ACE construction away from add_user_to_lr routine and refactor it to be used also in later code. Also adds boolean operators defines from TCG Core specification. Signed-off-by:
-
Ondrej Kozina authored
While adding user authority in boolean ace value of uid OPAL_LOCKINGRANGE_ACE_WRLOCKED or OPAL_LOCKINGRANGE_ACE_RDLOCKED, it was added twice. It seemed redundant when only single authority was added in the set method aka { authority1, authority1, OR }: TCG Storage Architecture Core Specification, 5.1.3.3 ACE_expression "This is an alternative type where the options are either a uidref to an Authority object or one of the boolean_ACE (AND = 0 and OR = 1) options. This type is used within the AC_element list to form a postfix Boolean expression of Authorities." Signed-off-by:
-
- 03 Apr, 2023 5 commits
-
-
Ming Lei authored
'struct ublk_map_data' is passed to ublk_copy_user_pages() for copying data between userspace buffer and request pages. Here what matters is userspace buffer address/len and 'struct request', so replace ->io field with user buffer address, and rename max_bytes as len. Meantime remove 'ubq' field from ublk_map_data, since it isn't used any more. Then code becomes more readable. Reviewed-by:
Ziyang Zhang <ZiyangZhang@linux.alibaba.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Ming Lei authored
Convert the following pattern in several helpers if (Z) return true return false into: return Z; Reviewed-by:
-
Ming Lei authored
Add two helpers for checking if map/unmap is needed, since we may have passthrough request which needs map or unmap in future, such as for supporting report zones. Meantime don't mark ublk_copy_user_pages as inline since this function is a bit fat now. Reviewed-by:
-
Ming Lei authored
There isn't data in request of REQ_OP_FLUSH always, so don't consider it in both ublk_map_io() and ublk_unmap_io(). Reviewed-by:
-
Ming Lei authored
Simplify exit handling a bit, and prepare for supporting fused command. Reviewed-by:
-
- 02 Apr, 2023 9 commits
-
-
Christoph Böhmwalder authored
Originally-from: Andreas Grünbacher <agruen@linbit.com> Signed-off-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.comSigned-off-by:
-
Christoph Böhmwalder authored
In preparation to support multiple connections, we need to know which one we need to modify the request state for. Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
-
Christoph Böhmwalder authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
Andreas Gruenbacher <agruen@linbit.com> Signed-off-by:
-
Andreas Gruenbacher authored
Pass a peer device parameter through the bitmap I/O functions to the I/O handlers. In after_state_ch(), set that parameter when queuing the drbd_send_bitmap operation so that this operation knows where to send the bitmap. Signed-off-by:
Andreas Gruenbacher <agruen@kernel.org> Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Christoph Böhmwalder authored
Primarily to silence warnings like: warning: no previous prototype for 'xxx_genl_cmd_to_str' [-Wmissing-prototypes] Signed-off-by:
-
Chaitanya Kulkarni authored
Replace the deprecated API kmap_atomic() and kunmap_atomic() with kmap_local_page() and kunmap_local() in null_flush_cache_page(). Signed-off-by:
Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20230330184926.64209-2-kch@nvidia.comSigned-off-by:
-
Chaitanya Kulkarni authored
Use library helper memcpy_page() to copy source page into destination instead of having duplicate code in copy_to_nullb() & copy_from_nullb(). In copy_from_nullb() also replace the memset call with zero_user(). Use library helper memset_page() to set the buffer to 0xFF instead of having duplicate code. This also removes deprecated API kmap_atomic() from copy_to_nullb() copy_from_nullb() and nullb_fill_pattern(), from :include/linux/highmem.h: "kmap_atomic - Atomically map a page for temporary usage - Deprecated!" Signed-off-by:
-
- 27 Mar, 2023 2 commits
-
-
Chaitanya Kulkarni authored
There is only one caller for __blk_account_io_done(), the function is small enough to fit in its caller blk_account_io_done(). Remove the function and opencode in the its caller blk_account_io_done(). Signed-off-by:
-
Chaitanya Kulkarni authored
There is only one caller for __blk_account_io_start(), the function is small enough to fit in its caller blk_account_io_start(). Remove the function and opencode in the its caller blk_account_io_start(). Signed-off-by:
-
- 20 Mar, 2023 1 commit
-
-
Keith Busch authored
io_uring provides the only way user space can poll completions, and that always sets BLK_POLL_NOSLEEP. This effectively makes hybrid polling dead code, so remove it and everything supporting it. Hybrid polling was effectively killed off with 9650b453, "block: ignore RWF_HIPRI hint for sync dio", but still potentially reachable through io_uring until d729cf9a, "io_uring: don't sleep when polling for I/O", but hybrid polling probably should not have been reachable through that async interface from the beginning. Fixes: 9650b453 ("block: ignore RWF_HIPRI hint for sync dio") Fixes: d729cf9a ("io_uring: don't sleep when polling for I/O") Signed-off-by:
Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20230320194926.3353144-1-kbusch@meta.comSigned-off-by:
-
- 16 Mar, 2023 6 commits
-
-
Eric Biggers authored
Now that all callers of blk_crypto_put_keyslot() check for NULL before calling it, there is no need for blk_crypto_put_keyslot() to do the NULL check itself. Reviewed-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.orgSigned-off-by:
-
Eric Biggers authored
To avoid hiding information, pass on the error code from blk_crypto_rq_get_keyslot() instead of always using BLK_STS_IOERR. Signed-off-by:
-
Eric Biggers authored
blk_crypto_insert_cloned_request() is the same as blk_crypto_rq_get_keyslot(), so just use that directly. Signed-off-by:
-
Eric Biggers authored
If blk_crypto_evict_key() sees that the key is still in-use (due to a bug) or that ->keyslot_evict failed, it currently just returns while leaving the key linked into the keyslot management structures. However, blk_crypto_evict_key() is only called in contexts such as inode eviction where failure is not an option. So actually the caller proceeds with freeing the blk_crypto_key regardless of the return value of blk_crypto_evict_key(). These two assumptions don't match, and the result is that there can be a use-after-free in blk_crypto_reprogram_all_keys() after one of these errors occurs. (Note, these errors *shouldn't* happen; we're just talking about what happens if they do anyway.) Fix this by making blk_crypto_evict_key() unlink the key from the keyslot management structures even on failure. Also improve some comments. Fixes: 1b262839 ("block: Keyslot Manager for Inline Encryption") Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
blk_crypto_evict_key() is only called in contexts such as inode eviction where failure is not an option. So there is nothing the caller can do with errors except log them. (dm-table.c does "use" the error code, but only to pass on to upper layers, so it doesn't really count.) Just make blk_crypto_evict_key() return void and log errors itself. Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
Once all I/O using a blk_crypto_key has completed, filesystems can call blk_crypto_evict_key(). However, the block layer currently doesn't call blk_crypto_put_keyslot() until the request is being freed, which happens after upper layers have been told (via bio_endio()) the I/O has completed. This causes a race condition where blk_crypto_evict_key() can see 'slot_refs != 0' without there being an actual bug. This makes __blk_crypto_evict_key() hit the 'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without doing anything, eventually causing a use-after-free in blk_crypto_reprogram_all_keys(). (This is a very rare bug and has only been seen when per-file keys are being used with fscrypt.) There are two options to fix this: either release the keyslot before bio_endio() is called on the request's last bio, or make __blk_crypto_evict_key() ignore slot_refs. Let's go with the first solution, since it preserves the ability to report bugs (via WARN_ON_ONCE) where a key is evicted while still in-use. Fixes: a892c8d5 ("block: Inline encryption support for blk-mq") Cc: stable@vger.kernel.org Reviewed-by:
Nathan Huckleberry <nhuck@google.com> Reviewed-by:
-
- 14 Mar, 2023 1 commit
-
-
Jakub Kicinski authored
Use the macro for checking presence of required attributes. It has the advantage of reporting to the user which attr was missing in a machine-readable format (extack). Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
-
