- 23 Aug, 2007 32 commits
-
-
Oleg Nesterov authored
dequeue_signal: if (__SI_TIMER) { spin_unlock(&tsk->sighand->siglock); do_schedule_next_timer(info); spin_lock(&tsk->sighand->siglock); } Unless tsk == curent, this is absolutely unsafe: nothing prevents tsk from exiting. If signalfd was passed to another process, do_schedule_next_timer() is just wrong. Add yet another "tsk == current" check into dequeue_signal(). This patch fixes an oopsable bug, but breaks the scheduling of posix timers if the shared __SI_TIMER signal was fetched via signalfd attached to another sub-thread. Mostly fixed by the next patch. Signed-off-by:Oleg Nesterov <oleg@tv-sign.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Roland McGrath <roland@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
sys_timer_create() sets ->it_process and unlocks ->siglock, then checks tmr->it_sigev_notify to define if get_task_struct() is needed. We already passed ->it_id to the caller, another thread can delete this timer and free its memory in between. As a minimal fix, move this code under ->siglock, sys_timer_delete() takes it too before calling release_posix_timer(). A proper serialization would be to take ->it_lock, we add a partly initialized timer on posix_timers_id, not good. Signed-off-by:
-
Thomas Gleixner authored
timer_delete does: lock_timer(); timer->it_process = NULL; unlock_timer(); release_posix_timer(); timer->it_process is checked in lock_timer() to prevent access to a timer, which is on the way to be deleted, but the check happens after idr_lock is dropped. This allows release_posix_timer() to delete the timer before the lock code can check the timer: CPU 0 CPU 1 lock_timer(); timer->it_process = NULL; unlock_timer(); lock_timer() spin_lock(idr_lock); timer = idr_find(); spin_lock(timer->lock); spin_unlock(idr_lock); release_posix_timer(); spin_lock(idr_lock); idr_remove(timer); spin_unlock(idr_lock); free_timer(timer); if (timer->......) Change the locking to prevent this. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Geert Uytterhoeven authored
Introduce CONFIG_CHECK_SIGNATURE to control inclusion of check_signature() and avoid problems on platforms that don't have readb(). Let the few legacy (ISA || PCI || X86) drivers that need check_signature() select CONFIG_CHECK_SIGNATURE. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Geert Uytterhoeven authored
m68k/mac: Make mac_hid_mouse_emulate_buttons() declaration visible drivers/char/keyboard.c: In function 'kbd_keycode': drivers/char/keyboard.c:1142: error: implicit declaration of function 'mac_hid_mouse_emulate_buttons' The forward declaration of mac_hid_mouse_emulate_buttons() is not visible on m68k because it's hidden in the middle of a big #ifdef block. Move it to <linux/kbd_kern.h>, correct the type of the second parameter, and include <linux/kbd_kern.h> where needed. Signed-off-by:
-
Geert Uytterhoeven authored
zorro: Make the sysfs `config' attribute read-only, as you cannot write to it (there's no .write function neither). Signed-off-by:
-
Geert Uytterhoeven authored
m68k: Fix a few hickups in drivers/scsi/Kconfig Signed-off-by:
-
Roman Zippel authored
Don't include RODATA into text segment as it includes the kallsyms data and can cause spurious link failures (layout differences can change the number of symbols in kallsyms, i.e. when a symbol is equal to _etext it's not included). Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Alan Cox authored
Add the needed constants and defines to activate the existing code. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Geert Uytterhoeven authored
m68k: Use _AC() instead of #ifdef __ASSEMBLY__ hackery when needed, remove hackery when unused. Signed-off-by:
-
Johannes Berg authored
When suspend is ever implemented for pmu68k it really should follow the generic pm_ops concept and not mirror the platform-specific /dev/pmu device with ioctls on it. Hence, this patch removes the unused code there; should the implementers need it they can look at via-pmu.c and/or the history of the file. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Roman Zippel authored
Remove an unnecessary m68k_memoffset export and initialization Signed-off-by:
-
Geert Uytterhoeven authored
Kill a superfluous extern declaration Signed-off-by:
-
Geert Uytterhoeven authored
m68k: <asm/page.h> needs <linux/compiler.h> because of __attribute_const__ Signed-off-by:
-
Alan Cox authored
The new exec code inserts an accounted vma into an mm struct which is not current->mm. The existing memory check code has a hard coded assumption that this does not happen as does the security code. As the correct mm is known we pass the mm to the security method and the helper function. A new security test is added for the case where we need to pass the mm and the existing one is modified to pass current->mm to avoid the need to change large amounts of code. (Thanks to Tobias for fixing rejects and testing) Signed-off-by:
-
David Brownell authored
The new rtc-m41t80 driver name doesn't match its module name, which prevents it from properly hotplugging. Since it's new, no platforms yet depend on that name ... so this patch fixes the driver name to match its module name, rather than going the other way around with a MODULE_ALIAS(). NOTE: This sort of bug is a new thing to watch out for with new-style I2C drivers; previously I2C couldn't hotplug. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Acked-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Andy Whitcroft authored
Lumpy reclaim works by selecting a lead page from the LRU list and then selecting pages for reclaim from the order-aligned area of pages. In the situation were all pages in that region are inactive and not referenced by any process over time, it works well. In the situation where there is even light load on the system, the pages may not free quickly. Out of a area of 1024 pages, maybe only 950 of them are freed when the allocation attempt occurs because lumpy reclaim returned early. This patch alters the behaviour of direct reclaim for large contiguous blocks. The first attempt to call shrink_page_list() is asynchronous but if it fails, the pages are submitted a second time and the calling process waits for the IO to complete. This may stall allocators waiting for contiguous memory but that should be expected behaviour for high-order users. It is preferable behaviour to potentially queueing unnecessary areas for IO. Note that kswapd will not stall in this fashion. [apw@shadowen.org: update to version 2] [apw@shadowen.org: update to version 3] Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Andy Whitcroft authored
As pointed out by Mel when reclaim is applied at higher orders a significant amount of IO may be started. As this takes finite time to drain reclaim will consider more areas than ultimatly needed to satisfy the request. This leads to more reclaim than strictly required and reduced success rates. I was able to confirm Mel's test results on systems locally. These show that even under light load the success rates drop off far more than expected. Testing with a modified version of his patch (which follows) I was able to allocate almost all of ZONE_MOVABLE with a near idle system. I ran 5 test passes sequentially following system boot (the system has 29 hugepages in ZONE_MOVABLE): 2.6.23-rc1 11 8 6 7 7 sync_lumpy 28 28 29 29 26 These show that although hugely better than the near 0% success normally expected we can only allocate about a 1/4 of the zone. Using synchronous reclaim for these allocations we get close to 100% as expected. I have also run our standard high order tests and these show no regressions in allocation success rates at rest, and some significant improvements under load. This patch: We are transitioning pages from active to inactive in clear_active_flags, those need counting as PGDEACTIVATE vm events. Signed-off-by:
-
Yoshinori Sato authored
Build error fix. Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Michael Neuling authored
Commit b663a79c ("taskstats: add context-switch counters") incorrectly removed a comma from a printf statement. This causes corruption in the output printing or a seg fault. Signed-off-by:
Michael Neuling <mikey@neuling.org> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
Andrew Morton authored
If we're going to run the handler from free_irq() then we must do it with local irq's disabled. Otherwise lockdep complains that the handler is taking irq-safe spinlocks in a non-irq-safe fashion. Cc: Ingo Molnar <mingo@elte.hu> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Christian Schmidt authored
The serial_pci driver tries to guess serial ports on unknown devices based on the PCI class (modem or serial). On certain softmodems (AC'97 modems) this can lead to the recognition of non-existing serial ports. This patch adds a blacklist of PCI IDs that are to be ignored by the driver. [akpm@linux-foundation.org: cleanups] Signed-off-by:
Christian Schmidt <schmidt@digadd.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Cc: Yinghai Lu <yinghai.lu@sun.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Corey Minyard authored
Reading the LSR clears the break, parity, frame error, and overrun bits in the 8250 chip, but these are not being saved in all places that read the LSR. Same goes for the MSR delta bits. Save the LSR bits off whenever the lsr is read so they can be handled later in the receive routine. Save the MSR bits to be handled in the modem status routine. Also, clear the stored bits and clear the interrupt registers before enabling interrupts, to avoid handling old values of the stored bits in the interrupt routines. [akpm@linux-foundation.org: clean up pre-existing code] Signed-off-by:
Corey Minyard <minyard@acm.org> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Cc: Yinghai Lu <yinghai.lu@sun.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by:
-
Atsushi Nemoto authored
This chip does not have modem control lines. Return TIOCM_CAR and TIOCM_DSR always on get_mctrl() and ajust some bits in termios cflag. Signed-off-by:
-
Niels de Vos authored
Add support for the it887x-chips (PCI) manufactured by ITE. Signed-off-by:
Niels de Vos <niels.devos@wincor-nixdorf.com> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by:
-
David Woodhouse authored
The uart_set_termios() function will bail out early without bothering to touch the hardware, if it decides that nothing "relevant" has changed. Unfortunately, its idea of "relevant" doesn't include c_[io]speed. So if the baud rate bits are BOTHER and you just change the speed, the change gets optimised away. This patch makes it ignore the old Bfoo bits in c_cflag and just check whether c_ispeed and c_ospeed have changed. Those integers are always set appropriately for us by set_termios(). Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Acked-by:
-
john stultz authored
Avoid futex_unlock_pi returning -EFAULT (which results in deadlock), by clearing uval before jumping to retry_locked. Signed-off-by:
John Stultz <johnstul@us.ibm.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Lee Schermerhorn authored
I couldn't find any memory policy documentation in the Documentation directory, so here is my attempt to document it. There's lots more that could be written about the internal design--including data structures, functions, etc. However, if you agree that this is better that the nothing that exists now, perhaps it could be merged. This will provide a baseline for updates to document the many policy patches that are currently being worked. Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Acked-by:
Rob Landley <rob@landley.net> Acked-by:
-
Adrian Bunk authored
This patch fixes an off-by-one in a BUG_ON() spotted by the Coverity checker. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Amy Griffis <amy.griffis@hp.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Kent Yoder authored
Fix up the maintainers info in the tpm drivers. Kylene will be out for some time, so copying the sourceforge list is the best way to get some attention. Cc: Marcel Selhorst <tpm@selhorst.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by:
-
Andy Whitcroft authored
Booting SPARSEMEM on NUMA systems trips a BUG in page_alloc.c: Initializing HighMem for node 0 (00038000:00100000) Initializing HighMem for node 1 (00100000:001ffe00) ------------[ cut here ]------------ kernel BUG at /home/apw/git/linux-2.6/mm/page_alloc.c:456! [...] This occurs because the section to node id mapping is not being setup correctly during init under SPARSEMEM_STATIC, leading to an attempt to free pages from all nodes into the zones on node 0. When the zone_table[] was removed in the following commit, a new section to node mapping table was introduced: commit 89689ae7 [PATCH] Get rid of zone_table[] That conversion inadvertantly only initialised the node mapping in SPARSEMEM_EXTREME. Ensure we initialise the node mapping in SPARSEMEM_STATIC. [akpm@linux-foundation.org: make the stubs static inline] Signed-off-by: -
Ryusuke Konishi authored
When ecryptfs_lookup() is called against special files, eCryptfs generates the following errors because it tries to treat them like regular eCryptfs files. Error opening lower file for lower_dentry [0xffff810233a6f150], lower_mnt [0xffff810235bb4c80], and flags [0x8000] Error opening lower_file to read header region Error attempting to read the [user.ecryptfs] xattr from the lower file; return value = [-95] Valid metadata not found in header region or xattr region; treating file as unencrypted For instance, the problem can be reproduced by the steps below. # mkdir /root/crypt /mnt/crypt # mount -t ecryptfs /root/crypt /mnt/crypt # mknod /mnt/crypt/c0 c 0 0 # umount /mnt/crypt # mount -t ecryptfs /root/crypt /mnt/crypt # ls -l /mnt/crypt This patch fixes it by adding a check similar to directories and symlinks. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by:
Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
- 22 Aug, 2007 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] Add support for 1533 bridge to alim1535_wdt [WATCHDOG] Add a 00-INDEX file to Documentation/watchdog/ [WATCHDOG] Eurotechwdt.c - clean-up comments
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC32]: Revert f642b263. [SPARC64]: Need to clobber global reg vars in switch_to().
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IRDA] irda_nl_get_mode: always results in failure [PPP]: Fix output buffer size in ppp_decompress_frame(). [IRDA]: Avoid a label defined but not used warning in irda_init() [IPV6]: Fix kernel panic while send SCTP data with IP fragments [SNAP]: Check packet length before reading [DCCP]: Allocation in atomic context
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Change atomic_read/set to inline functions with barrier semantics. [S390] kprobes: fix instruction length calculation [S390] hypfs: inode corruption due to missing locking [S390] disassembler: fix b2 opcodes like srst, bsg, and others [S390] vmur: fix reference counting for vmur device structure [S390] vmur: fix diag14 exceptions with addresses > 2GB. [S390] qdio: Refresh buffer states for IQDIO Asynchronous output queue [S390] qdio: fix EQBS handling on CCQ96 [S390] cio: change confusing message in cmf. [S390] cio: dont forget to set last slot to NULL in ccw_uevent().
-
Zachary Amsden authored
Touching vmalloc memory in the middle of a lazy mode update can generate a kernel PDE update, which must be flushed immediately. The fix is to leave lazy mode when doing a vmalloc sync. Signed-off-by:
Zachary Amsden <zach@vmware.com> Acked-by:
Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Heiko Carstens authored
After doing some tests this seems to be the best variant for s390 and should be correct as well. With gcc 4.2.1 we get the following kernel image sizes using the default configuration: atomic_t type volatile, atomic_read/set defines 5311824 bytes atomic_t type int, atomic_read/set defines 5270864 bytes atomic_t type int, atomic_read/set inline asm 5279056 bytes atomic_t type int, atomic_read/set inline barrier 5270864 bytes Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
David Wilder authored
Placing a kprobe on "bc" instruction (s390/s390x) can cause an oops. The instruction length is encoded into the first two bits of the s390 instruction. Kprobe is incorrectly computing the instruction length. The instruction length is used for determining what type of "fix-up" is needed for conditional branch instruction. The problem can bee seen by placing a kprobe on a "bc" instruction that will not branch. The results is that Kprobe incorrectly computes the new instruction pointer (psw.addr) after single stepping the instruction. The problem is corrected with this patch. Signed-off-by:
David Wilder <dwilder@us.ibm.com> Signed-off-by:
-
Michael Holzheu authored
hypfs removes the whole hypfs directory tree and creates a new one, when a process triggers an update by writing to the "update" attribute. When removing and creating files, it is necessary to lock the inode of the parent directory where the files live. Currently hypfs does not lock the parent inode, which can lead to inode corruption. This patch: * Introduces correct locking * Fixes i_nlink reference counting for inodes, when creating directories * Adds info printk, when hypfs filesystem has been mounted Signed-off-by:
Michael Holzheu <holzheu@de.ibm.com> Signed-off-by:
-
