we can't use getattr to fetch inline data while holding Fr cap,
because it can cause deadlock. If we need to sync read inline data,
drop cap refs first, then use getattr to fetch inline data.
Signed-off-by: Yan, Zheng <zyan@redhat.com>

we can't use getattr to fetch inline data after getting Fcr caps,
because it can cause deadlock. The solution is try bringing inline
data to page cache when not holding any cap, and hope the inline
data page is still there after getting the Fcr caps. If the page
is still there, pin it in page cache for later IO.
Signed-off-by: Yan, Zheng <zyan@redhat.com>

Add a new parameter 'locked_page' to ceph_do_getattr(). If inline data
in getattr reply will be copied to the page.
Signed-off-by: Yan, Zheng <zyan@redhat.com>

Request reply and cap message can contain inline data. add inline data
to the page cache if there is Fc cap.
Signed-off-by: Yan, Zheng <zyan@redhat.com>

Signed-off-by: Yan, Zheng <zyan@redhat.com>

allow specifying position of extent operation in multi-operations
osd request. This is required for cephfs to convert inline data to
normal data (compare xattr, then write object).
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@redhat.com>

Add CEPH_OSD_OP_CREATE support.  Also change libceph to not treat
CEPH_OSD_OP_DELETE as an extent op and add an assert to that end.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@redhat.com>

Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@redhat.com>

CEPH_OSD_OP_DELETE is not an extent op, stop treating it as such.  This
sneaked in with discard patches - it's one of the three osd ops (the
other two are CEPH_OSD_OP_TRUNCATE and CEPH_OSD_OP_ZERO) that discard
is implemented with.
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>

These were used to report git versions a long time ago.
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>

Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@redhat.com>

Current snaphost code does not properly handle moving inode from one
empty snap realm to another empty snap realm. After changing inode's
snap realm, some dirty pages' snap context can be not equal to inode's
i_head_snap. This can trigger BUG() in ceph_put_wrbuffer_cap_refs()

The fix is introduce a global empty snap context for all empty snap
realm. This avoids triggering the BUG() for filesystem with no snapshot.

Fixes: http://tracker.ceph.com/issues/9928Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@redhat.com>

There were two places we were assigning version in host byte order
instead of network byte order.

Also in MSG_CLIENT_SESSION we weren't setting compat_version in the
header to reflect continued compatability with older MDSs.

Fixes: http://tracker.ceph.com/issues/9945Signed-off-by: John Spray <john.spray@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>

2 bytes of what was reserved space is now used by userspace for the
compat_version field.
Signed-off-by: John Spray <john.spray@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>

Signed-off-by: Yan, Zheng <zyan@redhat.com>

Session key is required when calculating message signature. Save the session
key in authorizer, this avoid lookup ticket handler for each message
Signed-off-by: Yan, Zheng <zyan@redhat.com>

The functions ceph_put_snap_context() and iput() test whether their
argument is NULL and then return immediately. Thus the test around the
call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[idryomov@redhat.com: squashed rbd.c hunk, changelog]
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>

After creating/deleting/renaming file, offsets of sibling dentries may
change. So we can not use cached dentries to satisfy readdir. But we can
still use the cached dentries to conclude -ENOENT for lookup.

This patch introduces a new inode flag indicating if child dentries are
ordered. The flag is set at the same time marking a directory complete.
After creating/deleting/renaming file, we clear the flag on directory
inode. This prevents ceph_readdir() from using cached dentries to satisfy
readdir syscall.
Signed-off-by: Yan, Zheng <zyan@redhat.com>

Use kvfree() from linux/mm.h instead, which is identical.  Also fix the
ceph_buffer comment: we will allocate with kmalloc() up to 32k - the
value of PAGE_ALLOC_COSTLY_ORDER, but that really is just an
implementation detail so don't mention it at all.
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>

When a lock operation is interrupted, current code sends a unlock request to
MDS to undo the lock operation. This method does not work as expected because
the unlock request can drop locks that have already been acquired.

The fix is use the newly introduced CEPH_LOCK_FCNTL_INTR/CEPH_LOCK_FLOCK_INTR
requests to interrupt blocked file lock request. These requests do not drop
locks that have alread been acquired, they only interrupt blocked file lock
request.
Signed-off-by: Yan, Zheng <zyan@redhat.com>

Pull libata fixes from Tejun Heo:
 "Three libata fixes for v3.18.  Nothing too interesting.  PCI ID ID and
  quirk additions to ahci and an error handling path fix in sata_fsl"

* 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: disable MSI on SAMSUNG 0xa800 SSD
  sata_fsl: fix error handling of irq_of_parse_and_map
  AHCI: Add DeviceIDs for Sunrise Point-LP SATA controller

Pull watchdog fix from Wim Van Sebroeck:
 "Fix the watchdog mask bit offset for Exynos7"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7

Pull i2c fixes from Wolfram Sang:
 "Here are two more driver bugfixes for I2C which would be good to have"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: cadence: Set the hardware time-out register to maximum value
  i2c: davinci: generate STP always when NACK is received

The watchdog mask bit offset listed for Exynos7 is incorrect.
Fix this.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Naveen Krishna Chatradhi <naveenkrishna.ch@gmail.com
Reviewd-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Pull x86 fixes from Thomas Gleixner:
 "Two final fixlets for 3.18:
   - Prevent microcode reload wreckage on 32bit
   - Unbreak cross compilation"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: Limit the microcode reloading to 64-bit for now
  x86: Use $(OBJDUMP) instead of plain objdump

Pull sound fixlet from Takashi Iwai:
 "Just one commit for adding a copule of HD-audio quirk entries"

* tag 'sound-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Add headset Mic support for new Dell machine

Pull drm intel fixes from Dave Airlie:
 "Two intel stable fixes, that should be it from me for this round"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Unlock panel even when LVDS is disabled
  drm/i915: More cautious with pch fifo underruns

Pull ACPI backlight fix from Rafael Wysocki:
 "This is a simple fix for an ACPI backlight regression introduced by a
  recent commit that overlooked a corner case which should have been
  taken into account"

* tag 'pm+acpi-3.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: update condition to check if device is in _DOD list

Silence some pch fifo underrun reports and panel locking backtraces,
both cc: stable.

* tag 'drm-intel-fixes-2014-12-04' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Unlock panel even when LVDS is disabled
  drm/i915: More cautious with pch fifo underruns

Pull media fixes from Mauro Carvalho Chehab:
 "A core fix and some driver fixes:
   - regression fix in Remote Controller core affecting RC6 protocol
     handling
   - fix video buffer handling in cx23885
   - race fix in solo6x10
   - fix image selection in smiapp
   - fix reported payload size on s2255drv
   - two updates for MAINTAINERS file"

* tag 'media/v3.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] rc-core: fix toggle handling in the rc6 decoder
  MAINTAINERS: Update mchehab's addresses
  [media] cx23885: use sg = sg_next(sg) instead of sg++
  [media] s2255drv: fix payload size for JPG, MJPEG
  [media] Update MAINTAINERS for solo6x10
  [media] solo6x10: fix a race in IRQ handler
  [media] smiapp: Only some selection targets are settable

A typo "header=y" was introduced by commit 7071cf7f ("uapi: add
missing network related headers to kbuild").
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Cadence I2C controller has bug wherein it generates invalid read transactions
after timeout in master receiver mode. This driver does not use the HW
timeout and this interrupt is disabled but the feature itself cannot be
disabled. Hence, this patch writes the maximum value (0xFF) to this register.
This is one of the workarounds to this bug and it will not avoid the issue
completely but reduces the chances of error.
Signed-off-by: Vishnu Motghare <vishnum@xilinx.com>
Signed-off-by: Harini Katakam <harinik@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

According to I2C specification the NACK should be handled as follows:
"When SDA remains HIGH during this ninth clock pulse, this is defined as the Not
Acknowledge signal. The master can then generate either a STOP condition to
abort the transfer, or a repeated START condition to start a new transfer."
[I2C spec Rev. 6, 3.1.6: http://www.nxp.com/documents/user_manual/UM10204.pdf]

Currently the Davinci i2c driver interrupts the transfer on receipt of a
NACK but fails to send a STOP in some situations and so makes the bus
stuck until next I2C IP reset (idle/enable).

For example, the issue will happen during SMBus read transfer which
consists from two i2c messages write command/address and read data:

S Slave Address Wr A Command Code A Sr Slave Address Rd A D1..Dn A P
<--- write -----------------------> <--- read --------------------->

The I2C client device will send NACK if it can't recognize "Command Code"
and it's expected from I2C master to generate STP in this case.
But now, Davinci i2C driver will just exit with -EREMOTEIO and STP will
not be generated.

Hence, fix it by generating Stop condition (STP) always when NACK is received.

This patch fixes Davinci I2C in the same way it was done for OMAP I2C
commit cda2109a ("i2c: omap: query STP always when NACK is received").
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reported-by: Hein Tibosch <hein_tibosch@yahoo.es>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

Just like 0x1600 which got blacklisted by 66a7cbc3 ("ahci: disable
MSI instead of NCQ on Samsung pci-e SSDs on macbooks"), 0xa800 chokes
on NCQ commands if MSI is enabled.  Disable MSI.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dominik Mierzejewski <dominik@greysector.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=89171
Cc: stable@vger.kernel.org

It appears that some SCHEDULE_USER (asm for schedule_user) callers
in arch/x86/kernel/entry_64.S are called from RCU kernel context,
and schedule_user will return in RCU user context.  This causes RCU
warnings and possible failures.

This is intended to be a minimal fix suitable for 3.18.
Reported-and-tested-by: Dave Jones <davej@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull i2c bugfixes from Wolfram Sang:
 "A few driver bugfixes for 3.18"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: omap: fix i207 errata handling
  i2c: designware: prevent early stop on TX FIFO empty
  i2c: omap: fix NACK and Arbitration Lost irq handling

Pull PCI fix from Bjorn Helgaas:
 "This fixes a Tegra20 regression that we introduced during the v3.18
  merge window"

* tag 'pci-v3.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: tegra: Use physical range for I/O mapping

Pull devicetree bugfix from Grant Likely:
 "One more bug fix for v3.18.  I debated whether or not to send you this
  merge request because we're at such a late rc.  The bug isn't critical
  in that there is only one system known to be affected and the patch is
  easy to backport.  The codepath is used by pretty much every DT based
  system, so there is risk a of regression (it /should/ be safe, but
  I've been bitten by stuff that should be safe before).  I've had it in
  linux-next for a week and haven't received any complaints.

  I think it probably should just be merged right away rather than
  waiting for the merge window and backporting.  It does fix a real bug
  and the code is theoretically safer after the change.  I can't think
  of any situation where it would be dangerous to reserve the DT memory
  an extra time.

  Summary from tag:

    Single bugfix for boot failure seen in the wild.  The memory reserve
    code tries to be clever about reserving the FDT, but it should just
    go ahead and reserve it unconditionally to avoid the problem of
    partial overlap described in the patch"

* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux:
  of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlap

Pull block core regression fix from Jens Axboe:
 "Single fix for a regression introduced in this development cycle,
  where dm on top of dif/dix is broken.  From Darrick Wong"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix regression where bio_integrity_process uses wrong bio_vec iterator