- 11 Apr, 2023 1 commit
-
-
Daniel Vetter authored
Merge tag 'drm-habanalabs-next-2023-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next This tag contains additional habanalabs driver changes for v6.4: - uAPI changes: - Add a definition of a new Gaudi2 server type. This is used by userspace to know what is the connectivity between the accelerators inside the server - New features and improvements: - speedup h/w queues test in Gaudi2 to reduce device initialization times. - Firmware related fixes: - Fixes to the handshake protocol during f/w initialization. - Sync f/w events interrupt in hard reset to avoid warning message. - Improvements to extraction of the firmware version. - Misc bug fixes and code cleanups. Notable fixes are: - Multiple fixes for interrupt handling in Gaudi2. - Unmap mapped memory in case TLB invalidation fails. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Oded Gabbay <ogabbay@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230410124637.GA2441888@ogabbay-vm-u20.habana-labs.com
-
- 08 Apr, 2023 22 commits
-
-
Tomer Tayar authored
hl_sysfs_fini() is called only if hl_sysfs_init() completes successfully. Therefore if hl_sysfs_init() fails, need to remove any sysfs group that was added until that point. Signed-off-by:
Tomer Tayar <ttayar@habana.ai> Reviewed-by:
Oded Gabbay <ogabbay@kernel.org> Signed-off-by:
-
Moti Haimovski authored
HW queues testing at driver load and after reset takes a substantial amount of time. This commit reduces the queues test time in Gaudi2 devices by running all the tests in parallel instead of one after the other. Time measurements on tests duration shows that the new method is almost x100 faster than the serial approach. Signed-off-by:
Moti Haimovski <mhaimovski@habana.ai> Reviewed-by:
-
Dani Liberman authored
There is only single eq entry for arc farm sei event which aggregates events from the four arc farms. Fix the code to handle this event according to this behavior. Signed-off-by:
Dani Liberman <dliberman@habana.ai> Reviewed-by:
-
Ofir Bitton authored
Multi MSI interrupts aren't working in Gaudi1 and because of that, we are only using a single MSI interrupt. Therefore, let's remove this dead code in order to avoid confusion. Signed-off-by:
Ofir Bitton <obitton@habana.ai> Reviewed-by:
-
Oded Gabbay authored
Add definition of a new Gaudi2 server type. This represents the connectivity between the cards in that server type. Signed-off-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
-
Ofir Bitton authored
Removing redundant asic prop variable as we don't need to expose this to common code. In addition, fix some typos. Signed-off-by:
-
Koby Elbaz authored
Sending COMMS_GOTO_WFE instructs the FW's CPU to halt (WFE state). Once sent, FW's CPU isn't expected to continue communicating with LKD. Therefore, the stage of waiting for COMMS_STS_OK should be skipped or else waiting for COMMS_STS_OK will simply timeout, which will trigger unexpected behavior. Signed-off-by:
Koby Elbaz <kelbaz@habana.ai> Reviewed-by:
-
Tal Cohen authored
Receiving events from FW, while the device is in hard reset, causes a warning message in Driver log. The message may point to a problem in the Driver or FW. But It also can appear as a result of events that have been sent from FW just before the hard reset. In order to avoid receiving events from FW while the device is in reset and is already in 'disabled' mode, sync the f/w events interrupt right before setting the device to 'disabled'. Signed-off-by:
Tal Cohen <talcohen@habana.ai> Reviewed-by:
-
Ofir Bitton authored
During event handling, driver sets relevant reset and user event notifier flags. Fix few wrong flags settings. Signed-off-by:
-
Tomer Tayar authored
The decoder IRQ status register may have several set bits upon an abnormal interrupt. Therefore, when setting the events mask, need to check all bits and not using if-else. Signed-off-by:
-
Tomer Tayar authored
Decoder abnormal interrupts are for errors and not for completion, so rename the relevant work and work function to not include 'completion'. Signed-off-by:
-
Ofir Bitton authored
There are rare cases of failures when cards are initialized due to wrong values in efuse mappings that are parsed by firmware. To help debug those cases, print (in debug level) the raw binning masks as fetched from the firmware during device initialization. Signed-off-by:
-
Ofir Bitton authored
Current mapping between HMMU event and HMMU block is wrong. In addition the captured address in case of a page fault or an access error is scrambled, Hence we must call the descramble function. Signed-off-by:
-
Dafna Hirschfeld authored
1. Rename the func to hl_get_preboot_major_minor because we also set the extracted values in hdev fields. 2. Free the allocated string in the calling function which makes more sense Signed-off-by:
Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by:
-
Dani Liberman authored
The register which needs to be cleared is the valid register instead of the address. Signed-off-by:
-
Tal Cohen authored
Fix an issue in hard reset flow in which the driver didn't send a disable pci message if there was an active compute context. In hard reset, disable pci message should be sent no matter if a compute context exists or not. Signed-off-by:
-
Tal Cohen authored
The disable pci message is sent in reset device. It informs the FW not to raise more EQs. The Driver may ignore received EQs, when the device is in disabled mode. The duplication happens when hard reset is scheduled during compute reset and also performs 'escalate_reset_flow'. Signed-off-by:
-
Koby Elbaz authored
COMMS protocol is used for LKD <--> FW communication, and any communication failure between the two might turn out to be destructive, hence, it should be well emphasized. Signed-off-by:
-
Dafna Hirschfeld authored
since the function might fail and we should propagate the failure. Signed-off-by:
-
Tal Cohen authored
When the device is in disabled state, the driver isn't suppose to receive any events from FW. Printing the event type, as part of the message that was already printed, shall help to get more info if this unexpected message is received. Signed-off-by:
-
Koby Elbaz authored
Once a memory mapping is added to the page tables, it's followed by a TLB invalidation request which could potentially fail (HW failure). Removing the mapping is simply a part of this failure handling routine. TLB invalidation failure prints were updated to be more accurate. Signed-off-by:
-
Cai Huoqing authored
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by:Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by:
-
- 06 Apr, 2023 17 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDaniel Vetter authored
- Fix DPT+shmem combo and add i915.enable_dpt modparam (Ville) - i915.enable_sagv module parameter (Ville) - Correction to QGV related register addresses (Vinod) - IPS debugfs per-crtc and new file for false_color (Ville) - More clean-up and reorganization of Display code (Jani) - DP DSC related fixes and improvements (Stanislav, Ankit, Suraj, Swati) - Make utility pin asserts more accurate (Ville) - Meteor Lake enabling (Daniele) - High refresh rate PSR fixes (Jouni) - Cursor and Plane chicken register fixes (Ville) - Align the ADL-P TypeC sequences with hardware specification (Imre) - Documentation build fixes and improvements to catch bugs earlier (Lee, Jani) - PL1 power limit hwmon entry changed to use 0 as disabled state (Ashutosh) - DP aux sync fix and improvements (Ville) - DP MST fixes and w/a (Stanislav) - Limit PXP drm-errors or warning on firmware API failures (Alan) Signed-off-by:
-
https://gitlab.freedesktop.org/drm/tegraDaniel Vetter authored
drm/tegra: Changes for v6.4-rc1 The majority of this is minor cleanups and fixes. Other than those, this contains Uwe's conversion to the new driver remove callback and Thomas' fbdev DRM client conversion. The driver can now also be built on other architectures to easy compile coverage. Finally, this adds Mikko as a second maintainer for the driver. As a next step we also want Tegra DRM to move into drm-misc to streamline the maintenance process. Signed-off-by:
-
Jani Nikula authored
Fix the warning: drivers/gpu/drm/i915/intel_wakeref.h:118: warning: expecting prototype for intel_wakeref_get_if_in_use(). Prototype was for intel_wakeref_get_if_active() instead Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230405104142.766598-2-jani.nikula@intel.com
-
Jani Nikula authored
There's not much point in a static work function having a kernel-doc comment. Just clean it up and make it a regular comment. This fixes the kernel-doc warnings: drivers/gpu/drm/i915/display/intel_tc.c:1370: warning: Function parameter or member 'work' not described in 'intel_tc_port_disconnect_phy_work' drivers/gpu/drm/i915/display/intel_tc.c:1370: warning: Excess function parameter 'dig_port' description in 'intel_tc_port_disconnect_phy_work' Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDaniel Vetter authored
drm-misc-next for v6.4-rc1: UAPI Changes: Cross-subsystem Changes: - Document port and rotation dt bindings better. - For panel timing DT bindings, document that vsync and hsync are first, rather than last in image. - Fix video/aperture typos. Core Changes: - Reject prime DMA-Buf attachment if get_sg_table is missing. (For self-importing dma-buf only.) - Add prime import/export to vram-helper. - Fix oops in drm/vblank when init is not called. - Fixup xres/yres_virtual and other fixes in fb helper. - Improve SCDC debugs. - Skip setting deadline on modesets. - Assorted TTM fixes. Driver Changes: - Add lima usage stats. - Assorted fixes to bridge/lt8192b, tc358767, ivpu, bridge/ti-sn65dsi83, ps8640. - Use pci aperture helpers in drm/ast lynxfb, radeonfb. - Revert some lima patches, as they required a commit that has been reverted upstream. - Add AUO NE135FBM-N41 v8.1 eDP panel. - Add QAIC accel driver. Signed-off-by:
-
Daniel Vetter authored
Merge tag 'drm-intel-gt-next-2023-04-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - (Build-time only, should not have any impact) drm/i915/uapi: Replace fake flex-array with flexible-array member "Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead." This is on core kernel request moving towards GCC 13. Driver Changes: - Fix context runtime accounting on sysfs fdinfo for heavy workloads (Tvrtko) - Add support for OA media units on MTL (Umesh) - Add new workarounds for Meteorlake (Daniele, Radhakrishna, Haridhar) - Fix sysfs to read actual frequency for MTL and Gen6 and earlier (Ashutosh) - Synchronize i915/BIOS on C6 enabling on MTL (Vinay) - Fix DMAR error noise due to GPU error capture (Andrej) - Fix forcewake during BAR resize on discrete (Andrzej) - Flush lmem contents after construction on discrete (Chris) - Fix GuC loading timeout on systems where IFWI programs low boot frequency (John) - Fix race condition UAF in i915_perf_add_config_ioctl (Min) - Sanitycheck MMIO access early in driver load and during forcewake (Matt) - Wakeref fixes for GuC RC error scenario and active VM tracking (Chris) - Cancel HuC delayed load timer on reset (Daniele) - Limit double GT reset to pre-MTL (Daniele) - Use i915 instead of dev_priv insied the file_priv structure (Andi) - Improve GuC load error reporting (John) - Simplify VCS/BSD engine selection logic (Tvrtko) - Perform uc late init after probe error injection (Andrzej) - Fix format for perf_limit_reasons in debugfs (Vinay) - Create per-gt debugfs files (Andi) - Documentation and kerneldoc fixes (Nirmoy, Lee) - Selftest improvements (Fei, Jonathan) Signed-off-by:
-
Nur Hussein authored
In tegra_sor_compute_config(), the 32-bit value mode->clock is multiplied by 1000, and assigned to the u64 variable pclk. We can avoid a potential 32-bit integer overflow by casting mode->clock to u64 before we do the arithmetic and assignment. Signed-off-by:
Nur Hussein <hussein@unixcat.org> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Thomas Zimmermann authored
Move code from ad-hoc fbdev callbacks into DRM client functions and remove the old callbacks. The functions instruct the client to poll for changed output or restore the display. The DRM core calls both, the old callbacks and the new client helpers, from the same places. The new functions perform the same operation as before, so there's no change in functionality. Replace all code that initializes or releases fbdev emulation throughout the driver. Instead initialize the fbdev client by a single call to tegra_fbdev_setup() after tegra has registered its DRM device. As in most drivers, tegra's fbdev emulation now acts like a regular DRM client. The fbdev client setup consists of the initial preparation and the hot-plugging of the display. The latter creates the fbdev device and sets up the fbdev framebuffer. The setup performs display hot-plugging once. If no display can be detected, DRM probe helpers re-run the detection on each hotplug event. A call to drm_dev_unregister() releases the client automatically. No further action is required within tegra. If the fbdev framebuffer has been fully set up, struct fb_ops.fb_destroy implements the release. For partially initialized emulation, the fbdev client reverts the initial setup. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Thomas Zimmermann authored
Initialize the fbdev client in the fbdev code with empty helper functions. Also clean up the client. The helpers will later implement various functionality of the DRM client. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Only build tegra's fbdev emulation if CONFIG_DRM_FBDEV_EMULATION has been enabled. As part of this change, move the code into its own source file. No functional changes. Signed-off-by:
-
Thomas Hellström authored
When swapping in, or under memory pressure ttm_tt_populate() may sleep for a substantiable amount of time. Allow interrupts during the sleep. This will also allow us to inject -EINTR errors during swapin in upcoming patches. Also avoid returning VM_FAULT_OOM, since that will confuse the core mm, making it print out a confused message and retrying the fault. Return VM_FAULT_SIGBUS also under OOM conditions. Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230404200650.11043-4-thomas.hellstrom@linux.intel.com
-
Thomas Hellström authored
When swapping out, we will split multi-order pages both in order to move them to the swap-cache and to be able to return memory to the swap cache as soon as possible on a page-by-page basis. Reduce the page max order to the system PMD size, as we can then be nicer to the system and avoid splitting gigantic pages. Looking forward to when we might be able to swap out PMD size folios without splitting, this will also be a benefit. v2: - Include all orders up to the PMD size (Christian König) v3: - Avoid compilation errors for architectures with special PFN_SHIFTs Signed-off-by:
-
Thomas Hellström authored
When hitting an error, the error path forgot to unmap dma mappings and could call set_pages_wb() on already uncached pages. Fix this by introducing a common ttm_pool_free_range() function that does the right thing. v2: - Simplify that common function (Christian König) v3: - Rename that common function to ttm_pool_free_range() (Christian König) Fixes: d099fc8f ("drm/ttm: new TT backend allocation pool v3") Cc: Christian König <christian.koenig@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Jeffrey Hugo authored
Add MAINTAINERS entry for the Qualcomm Cloud AI 100 driver. Signed-off-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by:
Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by:
Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Acked-by:
-
Jeffrey Hugo authored
Now that we have all the components of a minimum QAIC which can boot and run an AIC100 device, add the infrastructure that allows the QAIC driver to be built. Signed-off-by:
-
Pranjal Ramajor Asha Kanojiya authored
Some of the MHI channels for an AIC100 device need to be routed to userspace so that userspace can communicate directly with QSM. The MHI bus does not support this, and while the WWAN subsystem does (for the same reasons), AIC100 is not a WWAN device. Also, MHI is not something that other accelerators are expected to share, thus an accel subsystem function that meets this usecase is unlikely. Create a QAIC specific MHI userspace shim that exposes these channels. Start with QAIC_SAHARA which is required to boot AIC100 and is consumed by the kickstart application as documented in aic100.rst Each AIC100 instance (currently, up to 16) in a system will create a chardev for QAIC_SAHARA. This chardev will be found as /dev/<mhi instance>_QAIC_SAHARA For example - /dev/mhi0_QAIC_SAHARA Signed-off-by:
-
Jeffrey Hugo authored
Add the datapath component that manages BOs and submits them to running workloads on the qaic device via the dma_bridge hardware. This allows QAIC clients to interact with their workloads (run inferences) via the following ioctls along with mmap(): DRM_IOCTL_QAIC_CREATE_BO DRM_IOCTL_QAIC_MMAP_BO DRM_IOCTL_QAIC_ATTACH_SLICE_BO DRM_IOCTL_QAIC_EXECUTE_BO DRM_IOCTL_QAIC_PARTIAL_EXECUTE_BO DRM_IOCTL_QAIC_WAIT_BO DRM_IOCTL_QAIC_PERF_STATS_BO Signed-off-by:
-
