The AXP803 compatible was introduced recently with a fallback to the
AXP813, but it was never documented.

Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-pm@vger.kernel.org
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

MAX77849 is a combined fuel-gauge, charger and MUIC IC. Notably,
fuel-gauge has dedicated i2c lines and seems to be fully compatible
with max17047. Add new compatible for it reusing max17047 code paths.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

max77849 is a combined fuel-gauge, charger and MUIC device. Add it to
the bindings documentation.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus. If not explicitly taken by the I2C-driver,
then this semaphore is automatically taken by the I2C-bus-driver for
each I2C-transfer and this is a quite expensive operation.

Explicitly take the semaphore in probe() around the register-accesses
done during probe, so that this only needs to be done once, rather then
once per register-access.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus. If not explicitly taken by the I2C-driver,
then this semaphore is automatically taken by the I2C-bus-driver for
each I2C-transfer.

Move the AXP20X_CC_CTRL check done in probe() together with the other
register-accesses done in probe, so that we can take the semaphore once
for the entire set of register-accesses.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus and while the kernel holds the semaphore the CPU
and GPU power-states must not be changed otherwise the system will freeze.

This is a complex process, which is quite expensive. This is all done by
iosf_mbi_block_punit_i2c_access(). To ensure that no unguarded I2C-bus
accesses happen, iosf_mbi_block_punit_i2c_access() gets called by the
I2C-bus-driver for every I2C transfer. Because this is so expensive it
is allowed to call iosf_mbi_block_punit_i2c_access() in a nested
fashion, so that higher-level code which does multiple I2C-transfers can
call it once for a group of transfers, turning the calls done by the
I2C-bus-driver into no-ops.

Userspace power-supply API users typically will read all provided
properties in one go, refreshing the last read values when
power_supply_changed() is called by the driver and/or periodically
(e.g. every 2 minutes).

The reading of all properties in one go causes the P-Unit semaphore
to quickly be taken and released multiple times in a row. Certain
PMIC registers like AXP20X_FG_RES are even used in multiple properties
so they get read multiple times, leading to a P-Unit take + release
each time the register is read.

As already mentioned the taking of the P-Unit semaphore is a quite
expensive operation and it has also been reported that the
"hammering" of the P-Unit semaphore done by the axp288_fuel_gauge
driver can even cause stability issues with the system as a whole.

Switch over to a scheme where the axp288_fuel_gauge driver keeps
a local copy of all the registers which it uses for properties
and make it only refresh its copy of the registers if the values
are older then 1 minute; or when a fuel-gauge interrupt has
triggered since the last read.

This not only reduces the amount of reads, it also makes the code
do all the reads in one go, rather then reading specific registers
based on which property is being queried. This allows calling
iosf_mbi_block_punit_i2c_access() once before doing all the reads,
so that we now only take the P-Unit semaphore once per update.
Tested-by: Andrejus Basovas <cpp@gcc.lt>
Signed-off-by: Andrejus Basovas <cpp@gcc.lt>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Accessing registers on the AXP288 is quite expensive, so we should avoid
doing unnecessary accesses.

The FG_LOW_CAP_REG never changes underneath us, so we only need to read
it once. Devices with an AXP288 do not have user-replace (let alone
hot-swappable) batteries and the only bit we care about in the
PWR_OP_MODE register is the CHRG_STAT_BAT_PRESENT bit, so we can get
away with only reading the PWR_OP_MODE register once too.

Note that the FG_LOW_CAP_REG is not marked volatile in the regmap, so we
were effectively already reading it once. This change makes this explicit,
this is done as preparation of a further patch which moves all remaining
register accesses in fuel_gauge_get_property() out of that function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Directly store the struct device pointer in axp288_fg_info, rather then
storing a pointer to the struct platform_device there and then using
"&info->pdev->dev" everywhere.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus. This semaphore is automatically taken by the
I2C-bus-driver.

The retry on -EBUSY logic in fuel_gauge_reg_readb() likely was added to
deal with the I2C-bus-drive returning -EBUSY when it failed to take the
semaphore, but this really should never happen. The semaphore code even
has a WARN_ON(ret) to log a kernel backtrace if this does somehow happen,
when this happens something is seriously wrong and the system typically
freezes soon afterwards.

TL;DR: the regmap_read() should never fail with -EBUSY so the retries
are unnecessary.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

When fuel_gauge_reg_readb()/_writeb() fails, report which register we
were trying to read / write when the error happened.

Also reword the message a bit:
- Drop the axp288 prefix, dev_err() already prints this
- Switch from telegram / abbreviated style to a normal sentence, aligning
  the message with those from fuel_gauge_read_*bit_word()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Drop the IRQ mapping messages, because they are really not
interesting at all.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The debugfs code is simply just dumping a bunch of registers, the same
information can also easily be gotten through the regmap debugfs
interface or through the i2cdump utility.

I've not used the debugfs interface once in all these years that I've
been working on the axp288_fuel_gauge driver, so lets just remove it.

Note this also removes the temperature-channels from the list of
IIO ADC channels used by the driver, since these were only used in the
debugfs interface.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The values of various defines used in the driver are not aligned
properly when tabsize is set to 8 (I guess they were created with
a different tabsize).

Properly align the defines to make the code easier to read.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

In the function sc27xx_fgu_probe(), when get irq failed,
platform_get_irq() logs an error message, so remove
redundant message here.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Deal with deferred probe using dev_err_probe so the error is handled
and avoid logging lots probe defer information like the following:

[    9.125121] cw2015 4-0062: Failed to register power supply
[    9.211131] cw2015 4-0062: Failed to register power supply

Fixes: b4c7715c ("power: supply: add CellWise cw2015 fuel gauge driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This patch adds a driver for PCHG (Peripheral CHarGer). PCHG is a
framework managing power supplies for peripheral devices.

This driver creates a sysfs node for each peripheral charge port:

	/sys/class/power_supply/peripheral<n>

where <n> is the index of a charge port.

For example, when a stylus is connected to a NFC/WLC port, the node
returns:

	/sys/class/power_supply/peripheral0/
		capacity=50
		charge_type=Standard
		scope=Device
		status=Charging
		type=Battery
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This file isn't using any AB8500 symbols so drop these includes.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

If we rename the "abx500_chargalg" supply to "ab8500_chargalg"
as it should be named, the existing supplies are supplying that
supply but that was obviously not working since it had the
wrong name.

Now that the dependency kicks in we get a bunch
of NULL references from ab8500_chargalg_external_power_changed()
so check that the workqueue is allocated before we try to
queue work on it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Drop the entire idea with abx500 being abstract and different from ab8500
in the AB8500 charging drivers. This rids the two identical definitions
of a slew of structs in ab8500-bm.h and makes things less confusion and
easier to understand.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The "abx500" name on the charging algorithm stems from the ambition
to produce a series of these analog basebands, re-using the same
charging algorithm driver. No ASICs beside AB8500 and AB8505 were
ever produced so this terminology is confusing. Rename the
algorithm file and symbols to reflect the more narrow scope.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The kernel already has a static inline for linear interpolation
so use that instead of rolling our own.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

I know nothing about zone_device pages and !device_private pages; but if
try_to_migrate_one() will do nothing for them, then it's better that
try_to_migrate() filter them first, than trawl through all their vmas.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In the unlikely race case that page_mlock_one() finds VM_LOCKED has been
cleared by the time it got page table lock, page_vma_mapped_walk_done()
must be called before returning, either explicitly, or by a final call
to page_vma_mapped_walk() - otherwise the page table remains locked.

Fixes: cd62734c ("mm/rmap: split try_to_munlock from try_to_unmap")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.

It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped.  Refine the tests.

There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.

(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)

Fixes: 9a73f61b ("thp, mlock: do not mlock PTE-mapped file huge pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Parallel developments in mm/rmap.c have left behind some out-of-date
comments: try_to_migrate_one() also accepts TTU_SYNC (already commented
in try_to_migrate() itself), and try_to_migrate() returns nothing at
all.

TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it
in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so
delete the "recently referenced" comment from try_to_unmap_one() (once
upon a time the comment was near the removed codeblock, but they drifted
apart).
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/563ce5b2-7a44-5b4d-1dfd-59a0e65932a9@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull irq fixes from Ingo Molnar:
 "Two fixes:

   - Fix a MIPS IRQ handling RCU bug

   - Remove a DocBook annotation for a parameter that doesn't exist
     anymore"

* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
  genirq/irqdesc: Drop excess kernel-doc entry @lookup

Pull scheduler fixes from Ingo Molnar:
 "Three fixes:

   - Fix load tracking bug/inconsistency

   - Fix a sporadic CFS bandwidth constraints enforcement bug

   - Fix a uclamp utilization tracking bug for newly woken tasks"

* tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/uclamp: Ignore max aggregation if rq is idle
  sched/fair: Fix CFS bandwidth hrtimer expiry type
  sched/fair: Sync load_sum with load_avg after dequeue

Pull perf fixes from Ingo Molnar:
 "A fix and a hardware-enablement addition:

   - Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup

   - Add cstate event support for Intel ICELAKE_X and ICELAKE_D"

* tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Clean up error handling path of iio mapping
  perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support

Pull locking fixes from Ingo Molnar:

 - Fix a Sparc crash

 - Fix a number of objtool warnings

 - Fix /proc/lockdep output on certain configs

 - Restore a kprobes fail-safe

* tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: sparc: Fix arch_cmpxchg64_local()
  kprobe/static_call: Restore missing static_call_text_reserved()
  static_call: Fix static_call_text_reserved() vs __init
  jump_label: Fix jump_label_text_reserved() vs __init
  locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING

Pull more SCSI updates from James Bottomley:
 "This is a set of minor fixes and clean ups in the core and various
  drivers.

  The only core change in behaviour is the I/O retry for spinup notify,
  but that shouldn't impact anything other than the failing case"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
  scsi: virtio_scsi: Add validation for residual bytes from response
  scsi: ipr: System crashes when seeing type 20 error
  scsi: core: Retry I/O for Notify (Enable Spinup) Required error
  scsi: mpi3mr: Fix warnings reported by smatch
  scsi: qedf: Add check to synchronize abort and flush
  scsi: MAINTAINERS: Add mpi3mr driver maintainers
  scsi: libfc: Fix array index out of bound exception
  scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
  scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
  scsi: qedf: Use DEVICE_ATTR_RO() macro
  scsi: qedi: Use DEVICE_ATTR_RO() macro
  scsi: message: mptfc: Switch from pci_ to dma_ API
  scsi: be2iscsi: Fix some missing space in some messages
  scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
  scsi: ufs: Fix build warning without CONFIG_PM
  scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
  scsi: qla2xxx: Add heartbeat check
  scsi: virtio_scsi: Do not overwrite SCSI status
  scsi: libsas: Add LUN number check in .slave_alloc callback
  scsi: core: Inline scsi_mq_alloc_queue()
  ...

Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tool updates from Arnaldo Carvalho de Melo:
 "New features:

   - Enable use of BPF counters with 'perf stat --for-each-cgroup',
     using per-CPU 'cgroup-switch' events with an attached BPF program
     that does aggregation per-cgroup in the kernel instead of using
     per-cgroup perf events.

   - Add Topdown metrics L2 events as default events in 'perf stat' for
     systems having those events.

  Hardware tracing:

   - Add a config for max loops without consuming a packet in the Intel
     PT packet decoder, set via 'perf config intel-pt.max-loops=N'

  Hardware enablement:

   - Disable misleading NMI watchdog message in 'perf stat' on hybrid
     systems such as Intel Alder Lake.

   - Add a dummy event on hybrid systems to collect metadata records.

   - Add 24x7 nest metric events for the Power10 platform.

  Fixes:

   - Fix event parsing for PMUs starting with the same prefix.

   - Fix the 'perf trace' 'trace' alias installation dir.

   - Fix buffer size to report iregs in perf script python scripts,
     supporting the extended registers in PowerPC.

   - Fix overflow in elf_sec__is_text().

   - Fix 's' on source line when disasm is empty in the annotation TUI,
     accessible via 'perf annotate', 'perf report' and 'perf top'.

   - Plug leaks in scandir() returned dirent entries in 'perf test' when
     sorting the shell tests.

   - Fix --task and --stat with pipe input in 'perf report'.

   - Fix 'perf probe' use of debuginfo files by build id.

   - If a DSO has both dynsym and symtab ELF sections, read from both
     when loading the symbol table, fixing a problem processing Fedora
     32 glibc DSOs.

  Libraries:

   - Add grouping of events to libperf, from code in tools/perf,
     allowing libperf users to use that mode.

  Misc:

   - Filter plt stubs from the 'perf probe --functions' output.

   - Update UAPI header copies for asound, DRM, mman-common.h and the
     ones affected by the quotactl_fd syscall"

* tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits)
  perf test: Add free() calls for scandir() returned dirent entries
  libperf: Add tests for perf_evlist__set_leader()
  libperf: Remove BUG_ON() from library code in get_group_fd()
  libperf: Add group support to perf_evsel__open()
  perf tools: Fix pattern matching for same substring in different PMU type
  perf record: Add a dummy event on hybrid systems to collect metadata records
  perf stat: Add Topdown metrics L2 events as default events
  libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()
  libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups
  libperf: Move 'leader' from tools/perf to perf_evsel::leader
  libperf: Move 'idx' from tools/perf to perf_evsel::idx
  libperf: Change tests to single static and shared binaries
  perf intel-pt: Add a config for max loops without consuming a packet
  perf stat: Disable the NMI watchdog message on hybrid
  perf vendor events power10: Adds 24x7 nest metric events for power10 platform
  perf script python: Fix buffer size to report iregs in perf script
  perf trace: Fix the perf trace link location
  perf top: Fix overflow in elf_sec__is_text()
  perf annotate: Fix 's' on source line when disasm is empty
  perf probe: Do not show @plt function by default
  ...

Pull RTC updates from Alexandre Belloni:
 "Mostly documentation/comment changes and non urgent fixes.

   - add or fix SPDX identifiers

   - NXP pcf*: fix datasheet URLs

   - imxdi: add wakeup support

   - pcf2127: handle timestamp interrupts, this fixes a possible
     interrupt storm

   - bd70528: Drop BD70528 support"

* tag 'rtc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
  rtc: pcf8523: rename register and bit defines
  rtc: pcf2127: handle timestamp interrupts
  rtc: at91sam9: Remove unnecessary offset variable checks
  rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()
  rtc: spear: convert to SPDX identifier
  rtc: tps6586x: convert to SPDX identifier
  rtc: tps80031: convert to SPDX identifier
  rtc: rtd119x: Fix format of SPDX identifier
  rtc: sc27xx: Fix format of SPDX identifier
  rtc: palmas: convert to SPDX identifier
  rtc: max6900: convert to SPDX identifier
  rtc: ds1374: convert to SPDX identifier
  rtc: au1xxx: convert to SPDX identifier
  rtc: pcf85063: Update the PCF85063A datasheet revision
  dt-bindings: rtc: ti,bq32k: take maintainership
  rtc: pcf8563: Fix the datasheet URL
  rtc: pcf85063: Fix the datasheet URL
  rtc: pcf2127: Fix the datasheet URL
  dt-bindings: rtc: ti,bq32k: Convert to json-schema
  dt-bindings: rtc: rx8900: Convert to YAML schema
  ...

Commit dbbee9d5 ("mm/page_alloc: convert per-cpu list protection to
local_lock") folded in a workaround patch for pahole that was unable to
deal with zero-sized percpu structures.

A superior workaround is achieved with commit a0b8200d ("kbuild:
skip per-CPU BTF generation for pahole v1.18-v1.21").

This patch reverts the dummy field and the pahole version check.

Fixes: dbbee9d5 ("mm/page_alloc: convert per-cpu list protection to local_lock")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly
and defines REG_OFFSET. Rename the register and bit definition to something
specific to the driver.

Fixes: 7fd70c65 ("ARM: irqstat: Get rid of duplicated declaration")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210710211431.1393589-1-alexandre.belloni@bootlin.com

Pull cifs fixes from Steve French:
 "13 cifs/smb3 fixes. Most are to address minor issues pointed out by
  Coverity.

  Also includes a packet signing enhancement and mount improvement"

* tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal version number
  cifs: prevent NULL deref in cifs_compose_mount_options()
  SMB3.1.1: Add support for negotiating signing algorithm
  cifs: use helpers when parsing uid/gid mount options and validate them
  CIFS: Clarify SMB1 code for POSIX Lock
  CIFS: Clarify SMB1 code for rename open file
  CIFS: Clarify SMB1 code for delete
  CIFS: Clarify SMB1 code for SetFileSize
  smb3: fix typo in header file
  CIFS: Clarify SMB1 code for UnixSetPathInfo
  CIFS: Clarify SMB1 code for UnixCreateSymLink
  cifs: clarify SMB1 code for UnixCreateHardLink
  cifs: make locking consistent around the server session status

Pull pci fix from Bjorn Helgaas:
 "Revert host bridge window patch that fixed HP EliteDesk 805 G6, but
  broke ppc:sam460ex (Bjorn Helgaas)"

* tag 'pci-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI: Coalesce host bridge contiguous apertures"

Pull i3c updates from Alexandre Belloni:

 - two small fixes to the svc driver

* tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: fix doc warning in svc-i3c-master.c
  i3c: master: svc: drop free_irq of devm_request_irq allocated irq

Pull thermal updates from Daniel Lezcano:

 - Add rk3568 sensor support (Finley Xiao)

 - Add missing MODULE_DEVICE_TABLE for the Spreadtrum sensor (Chunyan
   Zhang)

 - Export additionnal attributes for the int340x thermal processor
   (Srinivas Pandruvada)

 - Add SC7280 compatible for the tsens driver (Rajeshwari Ravindra
   Kamble)

 - Fix kernel documentation for thermal_zone_device_unregister() and use
   devm_platform_get_and_ioremap_resource() (Yang Yingliang)

 - Fix coefficient calculations for the rcar_gen3 sensor driver (Niklas
   Söderlund)

 - Fix shadowing variable rcar_gen3_ths_tj_1 (Geert Uytterhoeven)

 - Add missing of_node_put() for the iMX and Spreadtrum sensors
   (Krzysztof Kozlowski)

 - Add tegra3 thermal sensor DT bindings (Dmitry Osipenko)

 - Stop the thermal zone monitoring when unregistering it to prevent a
   temperature update without the 'get_temp' callback (Dmitry Osipenko)

 - Add rk3568 DT bindings, convert bindings to yaml schemas and add the
   corresponding compatible in the Rockchip sensor (Ezequiel Garcia)

 - Add the sc8180x compatible for the Qualcomm tsensor (Bjorn Andersson)

 - Use the find_first_zero_bit() function instead of custom code (Andy
   Shevchenko)

 - Fix the kernel doc for the device cooling device (Yang Li)

 - Reorg the processor thermal int340x to set the scene for the PCI mmio
   driver (Srinivas Pandruvada)

 - Add PCI MMIO driver for the int340x processor thermal driver
   (Srinivas Pandruvada)

 - Add hwmon sensors for the mediatek sensor (Frank Wunderlich)

 - Fix warning for return value reported by Smatch for the int340x
   thermal processor (Srinivas Pandruvada)

 - Fix wrong register access and decoding for the int340x thermal
   processor (Srinivas Pandruvada)

* tag 'thermal-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (23 commits)
  thermal/drivers/int340x/processor_thermal: Fix tcc setting
  thermal/drivers/int340x/processor_thermal: Fix warning for return value
  thermal/drivers/mediatek: Add sensors-support
  thermal/drivers/int340x/processor_thermal: Add PCI MMIO based thermal driver
  thermal/drivers/int340x/processor_thermal: Split enumeration and processing part
  thermal: devfreq_cooling: Fix kernel-doc
  thermal/drivers/intel/intel_soc_dts_iosf: Switch to use find_first_zero_bit()
  dt-bindings: thermal: tsens: Add sc8180x compatible
  dt-bindings: rockchip-thermal: Support the RK3568 SoC compatible
  dt-bindings: thermal: convert rockchip-thermal to json-schema
  thermal/core/thermal_of: Stop zone device before unregistering it
  dt-bindings: thermal: Add binding for Tegra30 thermal sensor
  thermal/drivers/sprd: Add missing of_node_put for loop iteration
  thermal/drivers/imx_sc: Add missing of_node_put for loop iteration
  thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1
  thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations
  thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
  thermal/core: Correct function name thermal_zone_device_unregister()
  dt-bindings: thermal: tsens: Add compatible string to TSENS binding for SC7280
  thermal/drivers/int340x: processor_thermal: Export additional attributes
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Increase the -falign-functions alignment for the debug option.

 - Remove ugly libelf checks from the top Makefile.

 - Make the silent build (-s) more silent.

 - Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified.

 - Various script cleanups

* tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (27 commits)
  scripts: add generic syscallnr.sh
  scripts: check duplicated syscall number in syscall table
  sparc: syscalls: use pattern rules to generate syscall headers
  parisc: syscalls: use pattern rules to generate syscall headers
  nds32: add arch/nds32/boot/.gitignore
  kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
  kbuild: modpost: Explicitly warn about unprototyped symbols
  kbuild: remove trailing slashes from $(KBUILD_EXTMOD)
  kconfig.h: explain IS_MODULE(), IS_ENABLED()
  kconfig: constify long_opts
  scripts/setlocalversion: simplify the short version part
  scripts/setlocalversion: factor out 12-chars hash construction
  scripts/setlocalversion: add more comments to -dirty flag detection
  scripts/setlocalversion: remove workaround for old make-kpkg
  scripts/setlocalversion: remove mercurial, svn and git-svn supports
  kbuild: clean up ${quiet} checks in shell scripts
  kbuild: sink stdout from cmd for silent build
  init: use $(call cmd,) for generating include/generated/compile.h
  kbuild: merge scripts/mkmakefile to top Makefile
  sh: move core-y in arch/sh/Makefile to arch/sh/Kbuild
  ...