- 19 Jul, 2012 11 commits
-
-
stephen hemminger authored
The Ethernet II wrapper is only used by IPX protocol, may have once been used by Appletalk but not currently. Therefore it makes sense to move it to the IPX dust bin and drop the exports. Build tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
include/net/dst_ops.h:28:20: warning: ‘struct sock’ declared inside parameter list Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
tcp_v4_send_reset() and tcp_v4_send_ack() use a single socket per network namespace. This leads to bad behavior on multiqueue NICS, because many cpus contend for the socket lock and once socket lock is acquired, extra false sharing on various socket fields slow down the operations. To better resist to attacks, we use a percpu socket. Each cpu can run without contention, using appropriate memory (local node) Additional features : 1) We also mirror the queue_mapping of the incoming skb, so that answers use the same queue if possible. 2) Setting SOCK_USE_WRITE_QUEUE socket flag speedup sock_wfree() 3) We now limit the number of in-flight RST/ACK [1] packets per cpu, instead of per namespace, and we honor the sysctl_wmem_default limit dynamically. (Prior to this patch, sysctl_wmem_default value was copied at boot time, so any further change would not affect tcp_sock limit) [1] These packets are only generated when no socket was matched for the incoming packet. Reported-by: Bill Sommerfeld <wsommerfeld@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
Use global seqlock for the nh_exceptions. Call fnhe_oldest with the right hash chain. Correct the diff value for dst_set_expires. v2: after suggestions from Eric Dumazet: * get rid of spin lock fnhe_lock, rearrange update_or_create_fnhe * continue daddr search in rt_bind_exception v3: * remove the daddr check before seqlock in rt_bind_exception * restart lookup in rt_bind_exception on detected seqlock change, as suggested by David Miller Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Reported-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Use RFS infrastructure and flow steering in HW to keep CPU affinity of rx interrupts and application per TCP stream. A flow steering filter is added to the HW whenever the RFS ndo callback is invoked by core networking code. Because the invocation takes place in interrupt context, the actual setup of HW is done using workqueue. Whenever new filter is added, the driver checks for expiry of existing filters. Since there's window in time between the point where the core RFS code invoked the ndo callback, to the point where the HW is configured from the workqueue context, the 2nd, 3rd etc packets from that stream will cause the net core to invoke the callback again and again. To prevent inefficient/double configuration of the HW, the filters are kept in a database which is indexed using hash function to enable fast access. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Enable callers of mlx4_assign_eq to supply a pointer to cpu_rmap. If supplied, the assigned IRQ is tracked using rmap infrastructure. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Define this macro is one common place instead of duplicating it over the code Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
ip_options_compile can be called for forwarded packets, make sure the specific-destionation address is a local one as specified in RFC 1812, 4.2.2.2 Addresses in Options Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
Move fib_compute_spec_dst at the only place where it is needed. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 18 Jul, 2012 29 commits
-
-
Alexander Duyck authored
This change is just meant to defragment the flags as there are several hole that have been introduced since several features, or the flags for them, have been removed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
All of our hardware supports RSS even if it is only for a single queue. So instead of toting around the RSS enable flag I am updating the code so that all devices are enabled and if we want to disable RSS it is indicated via the RSS mask. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change essentially makes it so that we can enable almost all of the features all at once. This patch allows for the combination of SR-IOV, DCB, and FCoE in the case of the x540. It also beefs up the SR-IOV by adding support for RSS to the PF. The testing matrix gets to be very complex for this patch as there are a number of different features and subsets for queueing options. I tried to narrow these down a bit by restricting the PF to only supporting 4TC DCB when it is enabled in addition to SR-IOV. Cc: Greg Rose <gregory.v.rose@intel.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change allows all pools from the default pool forward to be enabled vi ixgbe_configure_virtualization. This is needed as we are planning to use queues belonging to adjacent pools for FCoE when SR-IOV and FCoE are both enabled. In addition this patch contains some minor formatting changes as there were a few spots that seemed to be in need of some cleanup. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
In ixgbevf_get_ringparam we could run into a NULL pointer dereference if the rings were not allocated when we attempted the call. To prevent that we can just access the tx/rx_ring_count values instead of attempting to access the rings to get the count. This change corrects a memory leak and memory corruption in ixgbevf_set_ringparam. The memory leak was due to us not freeing the resources from the ring before overwriting them. This change corrects the memory leak by making certain to call ixgbe_free_tx/rx_resources on the rings prior to freeing them. The memory corruption was because we were replacing the rings but not updating the q_vectors. It addresses the memory corruption by leaving the rings in place and instead just copying the contents of the new rings into the existing rings. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
There is a good bit of redundancy between the Tx checksum and segmentation offloads. In order to reduce some of this I am moving the code for creating a context descriptor into a separate function. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change adds the netdev to the ring structure. This allows for a quicker transition from ring to netdev without having to go from ring to adapter to netdev. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
The driver is going back one step from its' previous location before bumping tail. This is incorrect. We should just be writing the value of next_to_use into the tail register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Pascal Bouchareine authored
We have had an issue when using ixgbe+ixgbevf and 802.1 VLAN tagging. When attaching a VLAN to a VF, frames with a 802.1q priority appeared untagged on the VF hence not reaching the VLAN, where frames with priority 0 where tagged as expected and seen by the VLAN device. This seems due to the way ixgbevf is looking up the full tag (prio+cfi+vlan) against the adapter active_vlans, as a condition to mark the skb tagged. Signed-off-by: Pascal Bouchareine <pascal@gandi.net> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Eric Dumazet authored
Introduce ipv6_addr_hash() helper doing a XOR on all bits of an IPv6 address, with an optimized x86_64 version. Use it in flow dissector, as suggested by Andrew McGregor, to reduce hash collision probabilities in fq_codel (and other users of flow dissector) Use it in ip6_tunnel.c and use more bit shuffling, as suggested by David Laight, as existing hash was ignoring most of them. Use it in sunrpc and use more bit shuffling, using hash_32(). Use it in net/ipv6/addrconf.c, using hash_32() as well. As a cleanup, use it in net/ipv4/tcp_metrics.c Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrew McGregor <andrewmcgr@gmail.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Tom Herbert <therbert@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Cloned patch of Eric Dumazet for bonding. Some workloads greatly benefit of IFF_XMIT_DST_RELEASE capability on output net device, avoiding dirtying dst refcount. team currently disables IFF_XMIT_DST_RELEASE unconditionally. If all ports have the IFF_XMIT_DST_RELEASE bit set, then team dev can also have it in its priv_flags. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
Enabling runtime PM support for cpsw driver Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
Enabling runtime PM support for davinci mdio driver Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Wu authored
This patch adds the netpoll function to support netconsole. Tested and works fine on my "JMC250 PCI Express Gigabit Ethernet Controller" (PCI ID 0250). Signed-off-by: Peter Wu <lekensteyn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krishna Kumar authored
Use correct allocation flags during copy of user space fragments to the kernel. Also "improve" couple of for loops. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiko Schocher authored
add OF support for the davinci_emac driver. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: netdev@vger.kernel.org Cc: davinci-linux-open-source@linux.davincidsp.com Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Anatoly Sivov <mm05@mail.ru> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karsten Keil authored
usb_alloc_urb() return value needs to be checked to avoid later NULL pointer access. Reported by rucsoftsec@gmail.com via bugzilla.kernel.org #44601. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karsten Keil authored
pnp_activate_dev() return value needs to be checked to make sure that following calls calls to the PNP functions do work correctly. Fix for report #44491 on bugzilla.kernel.org. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The condition is always true so WOL will never work. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Drivers should pull only ethernet header from page frag to skb->head. Pulling 64 bytes is too much for TCP (without options) on IPv4. However, it makes sense to pull all the frame if it fits the 128 bytes bloc allocated for skb->head, to free one page per small incoming frame. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Po-Yu Chuang <ratbert@faraday-tech.com> Acked-by: Yan-Pai Chen <yanpai.chen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
Sold by O2 (telefonica germany) under the name "LTE4G" Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Saurabh authored
New VTI tunnel kernel module, Kconfig and Makefile changes. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Saurabh authored
Incorporated David and Steffen's comments. Add hook for rx-path xfmr4_mode_tunnel for VTI tunnel module. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Riesch authored
Return -ENOTSUPP if the initialization fails because the device is configured for a mode that is not supported by the driver. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Followup of commit 0c24604b (tcp: implement RFC 5961 4.2) As reported by Vijay Subramanian, we should send a challenge ACK instead of a dup ack if a SYN flag is set on a packet received out of window. This permits the ratelimiting to work as intended, and to increase correct SNMP counters. Suggested-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Vijay Subramanian <subramanian.vijay@gmail.com> Cc: Kiran Kumar Kella <kkiran@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Some workloads greatly benefit of IFF_XMIT_DST_RELEASE capability on output net device, avoiding dirtying dst refcount. bonding currently disables IFF_XMIT_DST_RELEASE unconditionally. If all slaves have the IFF_XMIT_DST_RELEASE bit set, then bonding master can also have it in its priv_flags Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
The usbnet API use the device ID table to store a pointer to a minidriver. Setting a generic pointer for dynamic device IDs will in most cases make them work as expected. usbnet will otherwise treat the dynamic IDs as blacklisted. That is rarely useful. There is no standard class describing devices supported by this driver, and most vendors don't even provide enough information to allow vendor specific wildcard matching. The result is that most of the supported devices must be explicitly listed in the device table. Allowing dynamic IDs to work both simplifies testing and verification of new devices, and provides a way for end users to use a device before the ID is added to the driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kevin Groeneveld authored
Add support for 64 bit stats to Broadcom b44 ethernet driver. Signed-off-by: Kevin Groeneveld <kgroeneveld@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Padmanabh Ratnakar authored
The ability of driver to transmit packets depends on logical state of the link. Ignore physical link status. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-