- 09 Jan, 2019 40 commits
-
-
Marc Zyngier authored
commit 107352a2 upstream. We currently only halt the guest when a vCPU messes with the active state of an SPI. This is perfectly fine for GICv2, but isn't enough for GICv3, where all vCPUs can access the state of any other vCPU. Let's broaden the condition to include any GICv3 interrupt that has an active state (i.e. all but LPIs). Cc: stable@vger.kernel.org Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Will Deacon authored
commit df655b75 upstream. Although bit 31 of VTCR_EL2 is RES1, we inadvertently end up setting all of the upper 32 bits to 1 as well because we define VTCR_EL2_RES1 as signed, which is sign-extended when assigning to kvm->arch.vtcr. Lucky for us, the architecture currently treats these upper bits as RES0 so, whilst we've been naughty, we haven't set fire to anything yet. Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Georgy A Bystrenin authored
commit 9a596f5b upstream. While resolving a bug with locks on samba shares found a strange behavior. When a file locked by one node and we trying to lock it from another node it fail with errno 5 (EIO) but in that case errno must be set to (EACCES | EAGAIN). This isn't happening when we try to lock file second time on same node. In this case it returns EACCES as expected. Also this issue not reproduces when we use SMB1 protocol (vers=1.0 in mount options). Further investigation showed that the mapping from status_to_posix_error is different for SMB1 and SMB2+ implementations. For SMB1 mapping is [NT_STATUS_LOCK_NOT_GRANTED to ERRlock] (See fs/cifs/netmisc.c line 66) but for SMB2+ mapping is [STATUS_LOCK_NOT_GRANTED to -EIO] (see fs/cifs/smb2maperror.c line 383) Quick changes in SMB2+ mapping from EIO to EACCES has fixed issue. BUG: https://bugzilla.kernel.org/show_bug.cgi?id=201971Signed-off-by:
Georgy A Bystrenin <gkot@altlinux.org> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Aaro Koskinen authored
commit edefae94 upstream. Commit 885872b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection") added RGMII interface detection for OCTEON III, but it results in the following logs: [ 7.165984] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe [ 7.173017] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe The current RGMII routines are valid only for older OCTEONS that use GMX/ASX hardware blocks. On later chips AGL should be used, but support for that is missing in the mainline. Until that is added, mark the interface as disabled. Fixes: 885872b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # 4.7+ Signed-off-by:
-
Paul Burton authored
commit ff4dd232 upstream. ASIDs have always been stored as unsigned longs, ie. 32 bits on MIPS32 kernels. This is problematic because it is feasible for the ASID version to overflow & wrap around to zero. We currently attempt to handle this overflow by simply setting the ASID version to 1, using asid_first_version(), but we make no attempt to account for the fact that there may be mm_structs with stale ASIDs that have versions which we now reuse due to the overflow & wrap around. Encountering this requires that: 1) A struct mm_struct X is active on CPU A using ASID (V,n). 2) That mm is not used on CPU A for the length of time that it takes for CPU A's asid_cache to overflow & wrap around to the same version V that the mm had in step 1. During this time tasks using the mm could either be sleeping or only scheduled on other CPUs. 3) Some other mm Y becomes active on CPU A and is allocated the same ASID (V,n). 4) mm X now becomes active on CPU A again, and now incorrectly has the same ASID as mm Y. Where struct mm_struct ASIDs are represented above in the format (version, EntryHi.ASID), and on a typical MIPS32 system version will be 24 bits wide & EntryHi.ASID will be 8 bits wide. The length of time required in step 2 is highly dependent upon the CPU & workload, but for a hypothetical 2GHz CPU running a workload which generates a new ASID every 10000 cycles this period is around 248 days. Due to this long period of time & the fact that tasks need to be scheduled in just the right (or wrong, depending upon your inclination) way, this is obviously a difficult bug to encounter but it's entirely possible as evidenced by reports. In order to fix this, simply extend ASIDs to 64 bits even on MIPS32 builds. This will extend the period of time required for the hypothetical system above to encounter the problem from 28 days to around 3 trillion years, which feels safely outside of the realms of possibility. The cost of this is slightly more generated code in some commonly executed paths, but this is pretty minimal: | Code Size Gain | Percentage -----------------------|----------------|------------- decstation_defconfig | +270 | +0.00% 32r2el_defconfig | +652 | +0.01% 32r6el_defconfig | +1000 | +0.01% I have been unable to measure any change in performance of the LMbench lat_ctx or lat_proc tests resulting from the 64b ASIDs on either 32r2el_defconfig+interAptiv or 32r6el_defconfig+I6500 systems. Signed-off-by:
James Hogan <jhogan@kernel.org> References: https://lore.kernel.org/linux-mips/80B78A8B8FEE6145A87579E8435D78C30205D5F3@fzex.ruijie.com.cn/ References: https://lore.kernel.org/linux-mips/1488684260-18867-1-git-send-email-jiwei.sun@windriver.com/ Cc: Jiwei Sun <jiwei.sun@windriver.com> Cc: Yu Huabing <yhb@ruijie.com.cn> Cc: stable@vger.kernel.org # 2.6.12+ Cc: linux-mips@vger.kernel.org Signed-off-by:
-
Huacai Chen authored
commit bec0de4c upstream. KEXEC needs the new kernel's load address to be aligned on a page boundary (see sanity_check_segment_list()), but on MIPS the default vmlinuz load address is only explicitly aligned to 16 bytes. Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase the alignment calculated by calc_vmlinuz_load_addr to 64KB. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Huacai Chen authored
commit 92aa0718 upstream. This patch is borrowed from ARM64 to ensure pmd_present() returns false after pmd_mknotpresent(). This is needed for THP. References: 5bb1cc0f ("arm64: Ensure pmd_present() returns false after pmd_mknotpresent()") Reviewed-by:
-
Huacai Chen authored
commit bb53fdf3 upstream. For multi-node Loongson-3 (NUMA configuration), r4k_blast_scache() can only flush Node-0's scache. So we add r4k_blast_scache_node() by using (CAC_BASE | (node_id << NODE_ADDRSPACE_SHIFT)) instead of CKSEG0 as the start address. Signed-off-by:
-
Paul Burton authored
commit adcc81f1 upstream. Mapping the delay slot emulation page as both writeable & executable presents a security risk, in that if an exploit can write to & jump into the page then it can be used as an easy way to execute arbitrary code. Prevent this by mapping the page read-only for userland, and using access_process_vm() with the FOLL_FORCE flag to write to it from mips_dsemul(). This will likely be less efficient due to copy_to_user_page() performing cache maintenance on a whole page, rather than a single line as in the previous use of flush_cache_sigtramp(). However this delay slot emulation code ought not to be running in any performance critical paths anyway so this isn't really a problem, and we can probably do better in copy_to_user_page() anyway in future. A major advantage of this approach is that the fix is small & simple to backport to stable kernels. Reported-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Hans Verkuil authored
commit e5f71a27 upstream. text[s] is a signed char, so using that as index into the font8x16 array can result in negative indices. Cast it to u8 to be safe. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+ccf0a61ed12f2a7313ee@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # for v4.7 and up Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Hans Verkuil authored
commit 560ccb75 upstream. When vivid_update_format_cap() is called it should free any overlay bitmap since the compose size will change. Signed-off-by:
-
Nava kishore Manne authored
commit 26068313 upstream. This patch Correct the RX interrupt mask value to handle the RX interrupts properly. Fixes: c8dbdc84 ("serial: xuartps: Rewrite the interrupt handling logic") Signed-off-by:
Nava kishore Manne <nava.manne@xilinx.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Martin Blumenstingl authored
commit 88960068 upstream. Treat "block_count" from struct f2fs_super_block as 64-bit little endian value in sanity_check_raw_super() because struct f2fs_super_block declares "block_count" as "__le64". This fixes a bug where the superblock validation fails on big endian devices with the following error: F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0) F2FS-fs (sda1): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0) F2FS-fs (sda1): Can't find valid F2FS filesystem in 2th superblock As result of this the partition cannot be mounted. With this patch applied the superblock validation works fine and the partition can be mounted again: F2FS-fs (sda1): Mounted with checkpoint version = 7c84 My little endian x86-64 hardware was able to mount the partition without this fix. To confirm that mounting f2fs filesystems works on big endian machines again I tested this on a 32-bit MIPS big endian (lantiq) device. Fixes: 0cfe75c5 ("f2fs: enhance sanity_check_raw_super() to avoid potential overflows") Cc: stable@vger.kernel.org Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Florian Westphal authored
commit 4cd273bb upstream. (not in Linus's tree now, but in nf.git + linux-next.git already.) age is signed integer, so result can be negative when the timestamps have a large delta. In this case we want to discard the entry. Instead of using age >= 2 || age < 0, just make it unsigned. Fixes: b36e4523 ("netfilter: nf_conncount: fix garbage collection confirm race") Reviewed-by:
Shawn Bohrer <sbohrer@cloudflare.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> [mfo: backport: use older file name, nf_conncount.c -> xt_connlimit.c] Signed-off-by:
Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Florian Westphal authored
commit b36e4523 upstream. Yi-Hung Wei and Justin Pettit found a race in the garbage collection scheme used by nf_conncount. When doing list walk, we lookup the tuple in the conntrack table. If the lookup fails we remove this tuple from our list because the conntrack entry is gone. This is the common cause, but turns out its not the only one. The list entry could have been created just before by another cpu, i.e. the conntrack entry might not yet have been inserted into the global hash. The avoid this, we introduce a timestamp and the owning cpu. If the entry appears to be stale, evict only if: 1. The current cpu is the one that added the entry, or, 2. The timestamp is older than two jiffies The second constraint allows GC to be taken over by other cpu too (e.g. because a cpu was offlined or napi got moved to another cpu). We can't pretend the 'doubtful' entry wasn't in our list. Instead, when we don't find an entry indicate via IS_ERR that entry was removed ('did not exist' or withheld ('might-be-unconfirmed'). This most likely also fixes a xt_connlimit imbalance earlier reported by Dmitry Andrianov. Cc: Dmitry Andrianov <dmitry.andrianov@alertme.com> Reported-by:
Justin Pettit <jpettit@vmware.com> Reported-by:
Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by:
-
Yi-Hung Wei authored
commit 21ba8847 upstream. Currently, we use check_hlist() for garbage colleciton. However, we use the ‘zone’ from the counted entry to query the existence of existing entries in the hlist. This could be wrong when they are in different zones, and this patch fixes this issue. Fixes: e59ea3df ("netfilter: xt_connlimit: honor conntrack zone if available") Signed-off-by:
-
Pablo Neira Ayuso authored
commit 5e5cbc7b upstream. This patch provides an interface to maintain the list of connections and the lookup function to obtain the number of connections in the list. Signed-off-by:
-
Florian Westphal authored
commit ce49480d upstream. Only stored, never read. This is a leftover from commit 7d084877 ("netfilter: connlimit: use rbtree for per-host conntrack obj storage"), which added the rbtree node struct that stores the address instead. Signed-off-by:
-
Filipe Manana authored
commit 41bd6067 upstream. The log tree has a long standing problem that when a file is fsync'ed we only check for new ancestors, created in the current transaction, by following only the hard link for which the fsync was issued. We follow the ancestors using the VFS' dget_parent() API. This means that if we create a new link for a file in a directory that is new (or in an any other new ancestor directory) and then fsync the file using an old hard link, we end up not logging the new ancestor, and on log replay that new hard link and ancestor do not exist. In some cases, involving renames, the file will not exist at all. Example: mkfs.btrfs -f /dev/sdb mount /dev/sdb /mnt mkdir /mnt/A touch /mnt/foo ln /mnt/foo /mnt/A/bar xfs_io -c fsync /mnt/foo <power failure> In this example after log replay only the hard link named 'foo' exists and directory A does not exist, which is unexpected. In other major linux filesystems, such as ext4, xfs and f2fs for example, both hard links exist and so does directory A after mounting again the filesystem. Checking if any new ancestors are new and need to be logged was added in 2009 by commit 12fcfd22 ("Btrfs: tree logging unlink/rename fixes"), however only for the ancestors of the hard link (dentry) for which the fsync was issued, instead of checking for all ancestors for all of the inode's hard links. So fix this by tracking the id of the last transaction where a hard link was created for an inode and then on fsync fallback to a full transaction commit when an inode has more than one hard link and at least one new hard link was created in the current transaction. This is the simplest solution since this is not a common use case (adding frequently hard links for which there's an ancestor created in the current transaction and then fsync the file). In case it ever becomes a common use case, a solution that consists of iterating the fs/subvol btree for each hard link and check if any ancestor is new, could be implemented. This solves many unexpected scenarios reported by Jayashree Mohan and Vijay Chidambaram, and for which there is a new test case for fstests under review. Fixes: 12fcfd22 ("Btrfs: tree logging unlink/rename fixes") CC: stable@vger.kernel.org # 4.4+ Reported-by:
Vijay Chidambaram <vvijay03@gmail.com> Reported-by:
Jayashree Mohan <jayashree2912@gmail.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Macpaul Lin authored
commit eafb27fa upstream. Mediatek Preloader is a proprietary embedded boot loader for loading Little Kernel and Linux into device DRAM. This boot loader also handle firmware update. Mediatek Preloader will be enumerated as a virtual COM port when the device is connected to Windows or Linux OS via CDC-ACM class driver. When the USB enumeration has been done, Mediatek Preloader will send out handshake command "READY" to PC actively instead of waiting command from the download tool. Since Linux 4.12, the commit "tty: reset termios state on device registration" (93857edd) causes Mediatek Preloader receiving some abnoraml command like "READYXX" as it sent. This will be recognized as an incorrect response. The behavior change also causes the download handshake fail. This change only affects subsequent connects if the reconnected device happens to get the same minor number. By disabling the ECHO termios flag could avoid this problem. However, it cannot be done by user space configuration when download tool open /dev/ttyACM0. This is because the device running Mediatek Preloader will send handshake command "READY" immediately once the CDC-ACM driver is ready. This patch wants to fix above problem by introducing "DISABLE_ECHO" property in driver_info. When Mediatek Preloader is connected, the CDC-ACM driver could disable ECHO flag in termios to avoid the problem. Signed-off-by:
Macpaul Lin <macpaul.lin@mediatek.com> Cc: stable@vger.kernel.org Reviewed-by:
Johan Hovold <johan@kernel.org> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Tejun Heo authored
commit e9d81a1b upstream. CSS_TASK_ITER_PROCS implements process-only iteration by making css_task_iter_advance() skip tasks which aren't threadgroup leaders; however, when an iteration is started css_task_iter_start() calls the inner helper function css_task_iter_advance_css_set() instead of css_task_iter_advance(). As the helper doesn't have the skip logic, when the first task to visit is a non-leader thread, it doesn't get skipped correctly as shown in the following example. # ps -L 2030 PID LWP TTY STAT TIME COMMAND 2030 2030 pts/0 Sl+ 0:00 ./test-thread 2030 2031 pts/0 Sl+ 0:00 ./test-thread # mkdir -p /sys/fs/cgroup/x/a/b # echo threaded > /sys/fs/cgroup/x/a/cgroup.type # echo threaded > /sys/fs/cgroup/x/a/b/cgroup.type # echo 2030 > /sys/fs/cgroup/x/a/cgroup.procs # cat /sys/fs/cgroup/x/a/cgroup.threads 2030 2031 # cat /sys/fs/cgroup/x/cgroup.procs 2030 # echo 2030 > /sys/fs/cgroup/x/a/b/cgroup.threads # cat /sys/fs/cgroup/x/cgroup.procs 2031 2030 The last read of cgroup.procs is incorrectly showing non-leader 2031 in cgroup.procs output. This can be fixed by updating css_task_iter_advance() to handle the first advance and css_task_iters_tart() to call css_task_iter_advance() instead of the inner helper. After the fix, the same commands result in the following (correct) result: # ps -L 2062 PID LWP TTY STAT TIME COMMAND 2062 2062 pts/0 Sl+ 0:00 ./test-thread 2062 2063 pts/0 Sl+ 0:00 ./test-thread # mkdir -p /sys/fs/cgroup/x/a/b # echo threaded > /sys/fs/cgroup/x/a/cgroup.type # echo threaded > /sys/fs/cgroup/x/a/b/cgroup.type # echo 2062 > /sys/fs/cgroup/x/a/cgroup.procs # cat /sys/fs/cgroup/x/a/cgroup.threads 2062 2063 # cat /sys/fs/cgroup/x/cgroup.procs 2062 # echo 2062 > /sys/fs/cgroup/x/a/b/cgroup.threads # cat /sys/fs/cgroup/x/cgroup.procs 2062 Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
"Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Fixes: 8cfd8147 ("cgroup: implement cgroup v2 thread support") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
-
Wenwen Wang authored
commit 7172122b upstream. In crypto_alloc_context(), a DMA pool is allocated through dma_pool_alloc() to hold the crypto context. The meta data of the DMA pool, including the pool used for the allocation 'ndev->ctx_pool' and the base address of the DMA pool used by the device 'dma', are then stored to the beginning of the pool. These meta data are eventually used in crypto_free_context() to free the DMA pool through dma_pool_free(). However, given that the DMA pool can also be accessed by the device, a malicious device can modify these meta data, especially when the device is controlled to deploy an attack. This can cause an unexpected DMA pool free failure. To avoid the above issue, this patch introduces a new structure crypto_ctx_hdr and a new field chdr in the structure nitrox_crypto_ctx hold the meta data information of the DMA pool after the allocation. Note that the original structure ctx_hdr is not changed to ensure the compatibility. Cc: <stable@vger.kernel.org> Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Johan Jonker authored
commit 8b19faf6 upstream. Fix typo in common_clk_branches. Make spdif_pre parent of spdif_frac. Fixes: 66746420 ("clk: rockchip: include downstream muxes into fractional dividers") Cc: stable@vger.kernel.org Signed-off-by:
Johan Jonker <jbx9999@hotmail.com> Acked-by:
Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Lukas Wunner authored
commit 56c17234 upstream. The IRQ handler bcm2835_spi_interrupt() first reads as much as possible from the RX FIFO, then writes as much as possible to the TX FIFO. Afterwards it decides whether the transfer is finished by checking if the TX FIFO is empty. If very few bytes were written to the TX FIFO, they may already have been transmitted by the time the FIFO's emptiness is checked. As a result, the transfer will be declared finished and the chip will be reset without reading the corresponding received bytes from the RX FIFO. The odds of this happening increase with a high clock frequency (such that the TX FIFO drains quickly) and either passing "threadirqs" on the command line or enabling CONFIG_PREEMPT_RT_BASE (such that the IRQ handler may be preempted between filling the TX FIFO and checking its emptiness). Fix by instead checking whether rx_len has reached zero, which means that the transfer has been received in full. This is also more efficient as it avoids one bus read access per interrupt. Note that bcm2835_spi_transfer_one_poll() likewise uses rx_len to determine whether the transfer has finished. Signed-off-by:
Lukas Wunner <lukas@wunner.de> Fixes: e34ff011 ("spi: bcm2835: move to the transfer_one driver model") Cc: stable@vger.kernel.org # v4.1+ Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Lukas Wunner authored
commit dbc94411 upstream. If submission of a DMA TX transfer succeeds but submission of the corresponding RX transfer does not, the BCM2835 SPI driver terminates the TX transfer but neglects to reset the dma_pending flag to false. Thus, if the next transfer uses interrupt mode (because it is shorter than BCM2835_SPI_DMA_MIN_LENGTH) and runs into a timeout, dmaengine_terminate_all() will be called both for TX (once more) and for RX (which was never started in the first place). Fix it. Signed-off-by:
-
Lukas Wunner authored
commit e82b0b38 upstream. If a DMA transfer finishes orderly right when spi_transfer_one_message() determines that it has timed out, the callbacks bcm2835_spi_dma_done() and bcm2835_spi_handle_err() race to call dmaengine_terminate_all(), potentially leading to double termination. Prevent by atomically changing the dma_pending flag before calling dmaengine_terminate_all(). Signed-off-by:
-
Theodore Ts'o authored
commit 18f2c4fc upstream. If the file system has been shut down or is read-only, then ext4_write_inode() needs to bail out early. Also use jbd2_complete_transaction() instead of ext4_force_commit() so we only force a commit if it is needed. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit fde87268 upstream. Some time back, nfsd switched from calling vfs_fsync() to using a new commit_metadata() hook in export_operations(). If the file system did not provide a commit_metadata() hook, it fell back to using sync_inode_metadata(). Unfortunately doesn't work on all file systems. In particular, it doesn't work on ext4 due to how the inode gets journalled --- the VFS writeback code will not always call ext4_write_inode(). So we need to provide our own ext4_nfs_commit_metdata() method which calls ext4_write_inode() directly. Google-Bug-Id: 121195940 Signed-off-by:
-
Theodore Ts'o authored
commit a805622a upstream. In ext4_expand_extra_isize_ea(), we calculate the total size of the xattr header, plus the xattr entries so we know how much of the beginning part of the xattrs to move when expanding the inode extra size. We need to include the terminating u32 at the end of the xattr entries, or else if there is uninitialized, non-zero bytes after the xattr entries and before the xattr values, the list of xattr entries won't be properly terminated. Reported-by:
Steve Graham <stgraham2000@gmail.com> Signed-off-by:
-
ruippan (潘睿) authored
commit e647e291 upstream. Commit e2b911c5 ("ext4: clean up feature test macros with predicate functions") broke the EXT4_IOC_GROUP_ADD ioctl. This was not noticed since only very old versions of resize2fs (before e2fsprogs 1.42) use this ioctl. However, using a new kernel with an enterprise Linux userspace will cause attempts to use online resize to fail with "No reserved GDT blocks". Fixes: e2b911c5 ("ext4: clean up feature test macros with predicate...") Cc: stable@kernel.org # v4.4 Signed-off-by:
ruippan (潘睿) <ruippan@tencent.com> Signed-off-by:
-
Maurizio Lombardi authored
commit 132d00be upstream. In case of error, ext4_try_to_write_inline_data() should unlock and release the page it holds. Fixes: f19d5870 ("ext4: add normal write support for inline data") Cc: stable@kernel.org # 3.8 Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
-
Pan Bian authored
commit 61157b24 upstream. The function frees qf_inode via iput but then pass qf_inode to lockdep_set_quota_inode on the failure path. This may result in a use-after-free bug. The patch frees df_inode only when it is never used. Fixes: daf647d2 ("ext4: add lockdep annotations for i_data_sem") Cc: stable@kernel.org # 4.6 Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Theodore Ts'o authored
commit fb265c9c upstream. Today, when sb_bread() returns NULL, this can either be because of an I/O error or because the system failed to allocate the buffer. Since it's an old interface, changing would require changing many call sites. So instead we create our own ext4_sb_bread(), which also allows us to set the REQ_META flag. Also fixed a problem in the xattr code where a NULL return in a function could also mean that the xattr was not found, which could lead to the wrong error getting returned to userspace. Fixes: ac27a0ec ("ext4: initial copy of files from ext3") Cc: stable@kernel.org # 2.6.19 Signed-off-by:
-
Ben Hutchings authored
commit 11a64a05 upstream. Depending on which functions are inlined in util/pmu.c, the snprintf() calls in perf_pmu__parse_{scale,unit,per_pkg,snapshot}() might trigger a warning: util/pmu.c: In function 'pmu_aliases': util/pmu.c:178:31: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=] snprintf(path, PATH_MAX, "%s/%s.unit", dir, name); ^~ I found this when trying to build perf from Linux 3.16 with gcc 8. However I can reproduce the problem in mainline if I force __perf_pmu__new_alias() to be inlined. Suppress this by using scnprintf() as has been done elsewhere in perf. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20181111184524.fux4taownc6ndbx6@decadent.org.ukSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Miquel Raynal authored
commit 81b1e6e6 upstream. Since the addition of platform MSI support, there were two helpers supposed to allocate/free IRQs for a device: platform_msi_domain_alloc_irqs() platform_msi_domain_free_irqs() In these helpers, IRQ descriptors are allocated in the "alloc" routine while they are freed in the "free" one. Later, two other helpers have been added to handle IRQ domains on top of MSI domains: platform_msi_domain_alloc() platform_msi_domain_free() Seen from the outside, the logic is pretty close with the former helpers and people used it with the same logic as before: a platform_msi_domain_alloc() call should be balanced with a platform_msi_domain_free() call. While this is probably what was intended to do, the platform_msi_domain_free() does not remove/free the IRQ descriptor(s) created/inserted in platform_msi_domain_alloc(). One effect of such situation is that removing a module that requested an IRQ will let one orphaned IRQ descriptor (with an allocated MSI entry) in the device descriptors list. Next time the module will be inserted back, one will observe that the allocation will happen twice in the MSI domain, one time for the remaining descriptor, one time for the new one. It also has the side effect to quickly overshoot the maximum number of allocated MSI and then prevent any module requesting an interrupt in the same domain to be inserted anymore. This situation has been met with loops of insertion/removal of the mvpp2.ko module (requesting 15 MSIs each time). Fixes: 552c494a ("platform-msi: Allow creation of a MSI-based stacked irq domain") Cc: stable@vger.kernel.org Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Sean Christopherson authored
commit 1b3ab5ad upstream. Fixes: 34a1cd60 ("kvm: x86: vmx: move some vmx setting from vmx_init() to hardware_setup()") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sean Christopherson authored
commit e8143499 upstream. ____kvm_handle_fault_on_reboot() provides a generic exception fixup handler that is used to cleanly handle faults on VMX/SVM instructions during reboot (or at least try to). If there isn't a reboot in progress, ____kvm_handle_fault_on_reboot() treats any exception as fatal to KVM and invokes kvm_spurious_fault(), which in turn generates a BUG() to get a stack trace and die. When it was originally added by commit 4ecac3fd ("KVM: Handle virtualization instruction #UD faults during reboot"), the "call" to kvm_spurious_fault() was handcoded as PUSH+JMP, where the PUSH'd value is the RIP of the faulting instructing. The PUSH+JMP trickery is necessary because the exception fixup handler code lies outside of its associated function, e.g. right after the function. An actual CALL from the .fixup code would show a slightly bogus stack trace, e.g. an extra "random" function would be inserted into the trace, as the return RIP on the stack would point to no known function (and the unwinder will likely try to guess who owns the RIP). Unfortunately, the JMP was replaced with a CALL when the macro was reworked to not spin indefinitely during reboot (commit b7c4145b "KVM: Don't spin on virt instruction faults during reboot"). This causes the aforementioned behavior where a bogus function is inserted into the stack trace, e.g. my builds like to blame free_kvm_area(). Revert the CALL back to a JMP. The changelog for commit b7c4145b ("KVM: Don't spin on virt instruction faults during reboot") contains nothing that indicates the switch to CALL was deliberate. This is backed up by the fact that the PUSH <insn RIP> was left intact. Note that an alternative to the PUSH+JMP magic would be to JMP back to the "real" code and CALL from there, but that would require adding a JMP in the non-faulting path to avoid calling kvm_spurious_fault() and would add no value, i.e. the stack trace would be the same. Using CALL: ------------[ cut here ]------------ kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356! invalid opcode: 0000 [#1] SMP CPU: 4 PID: 1057 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm] Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffc900004bbcc8 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff888273fd8000 R08: 00000000000003e8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000371fb0 R13: 0000000000000000 R14: 000000026d763cf4 R15: ffff888273fd8000 FS: 00007f3d69691700(0000) GS:ffff888277800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f89bc56fe0 CR3: 0000000271a5a001 CR4: 0000000000362ee0 Call Trace: free_kvm_area+0x1044/0x43ea [kvm_intel] ? vmx_vcpu_run+0x156/0x630 [kvm_intel] ? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? __set_task_blocked+0x38/0x90 ? __set_current_blocked+0x50/0x60 ? __fpu__restore_sig+0x97/0x490 ? do_vfs_ioctl+0xa1/0x620 ? __x64_sys_futex+0x89/0x180 ? ksys_ioctl+0x66/0x70 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x4f/0x100 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc ---[ end trace 9775b14b123b1713 ]--- Using JMP: ------------[ cut here ]------------ kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356! invalid opcode: 0000 [#1] SMP CPU: 6 PID: 1067 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm] Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffc90000497cd0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88827058bd40 R08: 00000000000003e8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000369fb0 R13: 0000000000000000 R14: 00000003c8fc6642 R15: ffff88827058bd40 FS: 00007f3d7219e700(0000) GS:ffff888277900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3d64001000 CR3: 0000000271c6b004 CR4: 0000000000362ee0 Call Trace: vmx_vcpu_run+0x156/0x630 [kvm_intel] ? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? __set_task_blocked+0x38/0x90 ? __set_current_blocked+0x50/0x60 ? __fpu__restore_sig+0x97/0x490 ? do_vfs_ioctl+0xa1/0x620 ? __x64_sys_futex+0x89/0x180 ? ksys_ioctl+0x66/0x70 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x4f/0x100 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc ---[ end trace f9daedb85ab3ddba ]--- Fixes: b7c4145b ("KVM: Don't spin on virt instruction faults during reboot") Cc: stable@vger.kernel.org Signed-off-by:
-
Dan Williams authored
commit ba6f508d upstream. Commit: f77084d9 "x86/mm/pat: Disable preemption around __flush_tlb_all()" addressed a case where __flush_tlb_all() is called without preemption being disabled. It also left a warning to catch other cases where preemption is not disabled. That warning triggers for the memory hotplug path which is also used for persistent memory enabling: WARNING: CPU: 35 PID: 911 at ./arch/x86/include/asm/tlbflush.h:460 RIP: 0010:__flush_tlb_all+0x1b/0x3a [..] Call Trace: phys_pud_init+0x29c/0x2bb kernel_physical_mapping_init+0xfc/0x219 init_memory_mapping+0x1a5/0x3b0 arch_add_memory+0x2c/0x50 devm_memremap_pages+0x3aa/0x610 pmem_attach_disk+0x585/0x700 [nd_pmem] Andy wondered why a path that can sleep was using __flush_tlb_all() [1] and Dave confirmed the expectation for TLB flush is for modifying / invalidating existing PTE entries, but not initial population [2]. Drop the usage of __flush_tlb_all() in phys_{p4d,pud,pmd}_init() on the expectation that this path is only ever populating empty entries for the linear map. Note, at linear map teardown time there is a call to the all-cpu flush_tlb_all() to invalidate the removed mappings. [1]: https://lkml.kernel.org/r/9DFD717D-857D-493D-A606-B635D72BAC21@amacapital.net [2]: https://lkml.kernel.org/r/749919a4-cdb1-48a3-adb4-adb81a5fa0b5@intel.com [ mingo: Minor readability edits. ] Suggested-by:
Dave Hansen <dave.hansen@linux.intel.com> Reported-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@intel.com Fixes: f77084d9 ("x86/mm/pat: Disable preemption around __flush_tlb_all()") Link: http://lkml.kernel.org/r/154395944713.32119.15611079023837132638.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Michal Hocko authored
commit 5b5e4d62 upstream. Swap storage is restricted to max_swapfile_size (~16TB on x86_64) whenever the system is deemed affected by L1TF vulnerability. Even though the limit is quite high for most deployments it seems to be too restrictive for deployments which are willing to live with the mitigation disabled. We have a customer to deploy 8x 6,4TB PCIe/NVMe SSD swap devices which is clearly out of the limit. Drop the swap restriction when l1tf=off is specified. It also doesn't make much sense to warn about too much memory for the l1tf mitigation when it is forcefully disabled by the administrator. [ tglx: Folded the documentation delta change ] Fixes: 377eeaa8 ("x86/speculation/l1tf: Limit swap file size to MAX_PA/2") Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
Jiri Kosina <jkosina@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: <linux-mm@kvack.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181113184910.26697-1-mhocko@kernel.orgSigned-off-by:
-
Patrick Dreyer authored
commit 7db54c89 upstream. This adds ELAN0501 to the ACPI table to support Elan touchpad found in ASUS Aspire F5-573G. Signed-off-by:
Patrick Dreyer <Patrick.Dreyer@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
