Due to the way I did the RX bitrate conversions in mac80211 with
spatch, going setting flags to setting the value, many drivers now
don't set the bandwidth value for 20 MHz, since with the flags it
wasn't necessary to (there was no 20 MHz flag, only the others.)

Rather than go through and try to fix up all the drivers, instead
renumber the enum so that 20 MHz, which is the typical bandwidth,
actually has the value 0, making those drivers all work again.

If VHT was hit used with a driver not reporting it, e.g. iwlmvm,
this manifested in hitting the bandwidth warning in
cfg80211_calculate_bitrate_vht().
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev
since it is always NULL.

This is clearly wrong, we have code to initialize it to loopback_dev,
unfortunately the order is still not correct.

loopback_dev is registered very early during boot, we lose a chance
to re-initialize it in notifier. addrconf_init() is called after
ip6_route_init(), which means we have no chance to correct it.

Fix it by moving this initialization explicitly after
ipv6_add_dev(init_net.loopback_dev) in addrconf_init().
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
qed*: Bug fix series.

The series contains minor bug fixes for qed/qede drivers.

Please consider applying it to 'net' branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fail the configuration of advertised speed-autoneg value if the config
update is not supported.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver currently uses advertised-autoneg value to populate the
supported-autoneg field. When advertised field is updated, user gets
the same value for supported field. Supported-autoneg value need to be
populated from the link capabilities value returned by the MFW.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Value for status block id could be more than 256 in 100G mode, need to
update its data type from u8 to u16.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IFLA_PHYS_PORT_NAME is a string attribute, so terminate it with \0.
Otherwise libnl3 fails to validate netlink messages with this attribute.
"ip -detail a" assumes too that the attribute is NUL-terminated when
printing it. It often was, due to padding.

I noticed this as libvirtd failing to start on a system with sfc driver
after upgrading it to Linux 4.11, i.e. when sfc added support for
phys_port_name.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes a race where vmbus callback for new packet arriving
could occur before NAPI is initialized.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

V2: using "aquantia" subsystem tag.

The command "ethtool -i ethX" should display driver name (driver: atlantic)
instead vendor name (driver: aquantia).
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

raw_send_hdrinc() and rawv6_send_hdrinc() expect that the buffer copied
from the userspace contains the IPv4/IPv6 header, so if too few bytes are
copied, parts of the header may remain uninitialized.

This bug has been detected with KMSAN.

For the record, the KMSAN report:

==================================================================
BUG: KMSAN: use of unitialized memory in nf_ct_frag6_gather+0xf5a/0x44a0
inter: 0
CPU: 0 PID: 1036 Comm: probe Not tainted 4.11.0-rc5+ #2455
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16
 dump_stack+0x143/0x1b0 lib/dump_stack.c:52
 kmsan_report+0x16b/0x1e0 mm/kmsan/kmsan.c:1078
 __kmsan_warning_32+0x5c/0xa0 mm/kmsan/kmsan_instr.c:510
 nf_ct_frag6_gather+0xf5a/0x44a0 net/ipv6/netfilter/nf_conntrack_reasm.c:577
 ipv6_defrag+0x1d9/0x280 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68
 nf_hook_entry_hookfn ./include/linux/netfilter.h:102
 nf_hook_slow+0x13f/0x3c0 net/netfilter/core.c:310
 nf_hook ./include/linux/netfilter.h:212
 NF_HOOK ./include/linux/netfilter.h:255
 rawv6_send_hdrinc net/ipv6/raw.c:673
 rawv6_sendmsg+0x2fcb/0x41a0 net/ipv6/raw.c:919
 inet_sendmsg+0x3f8/0x6d0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633
 sock_sendmsg net/socket.c:643
 SYSC_sendto+0x6a5/0x7c0 net/socket.c:1696
 SyS_sendto+0xbc/0xe0 net/socket.c:1664
 do_syscall_64+0x72/0xa0 arch/x86/entry/common.c:285
 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246
RIP: 0033:0x436e03
RSP: 002b:00007ffce48baf38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000436e03
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007ffce48baf90 R08: 00007ffce48baf50 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000401790 R14: 0000000000401820 R15: 0000000000000000
origin: 00000000d9400053
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:362
 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:257
 kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:270
 slab_alloc_node mm/slub.c:2735
 __kmalloc_node_track_caller+0x1f4/0x390 mm/slub.c:4341
 __kmalloc_reserve net/core/skbuff.c:138
 __alloc_skb+0x2cd/0x740 net/core/skbuff.c:231
 alloc_skb ./include/linux/skbuff.h:933
 alloc_skb_with_frags+0x209/0xbc0 net/core/skbuff.c:4678
 sock_alloc_send_pskb+0x9ff/0xe00 net/core/sock.c:1903
 sock_alloc_send_skb+0xe4/0x100 net/core/sock.c:1920
 rawv6_send_hdrinc net/ipv6/raw.c:638
 rawv6_sendmsg+0x2918/0x41a0 net/ipv6/raw.c:919
 inet_sendmsg+0x3f8/0x6d0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633
 sock_sendmsg net/socket.c:643
 SYSC_sendto+0x6a5/0x7c0 net/socket.c:1696
 SyS_sendto+0xbc/0xe0 net/socket.c:1664
 do_syscall_64+0x72/0xa0 arch/x86/entry/common.c:285
 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246
==================================================================

, triggered by the following syscalls:
  socket(PF_INET6, SOCK_RAW, IPPROTO_RAW) = 3
  sendto(3, NULL, 0, 0, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "ff00::", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = -1 EPERM

A similar report is triggered in net/ipv4/raw.c if we use a PF_INET socket
instead of a PF_INET6 one.
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

head is previously null checked and so the 2nd null check on head
is redundant and therefore can be removed.

Detected by CoverityScan, CID#1399505 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Under fuzzer stress, it is possible that a child gets a non NULL
fastopen_req pointer from its parent at accept() time, when/if parent
morphs from listener to active session.

We need to make sure this can not happen, by clearing the field after
socket cloning.

BUG: Double free or freeing an invalid pointer
Unexpected shadow byte: 0xFB
CPU: 3 PID: 20933 Comm: syz-executor3 Not tainted 4.11.0+ #306
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x292/0x395 lib/dump_stack.c:52
 kasan_object_err+0x1c/0x70 mm/kasan/report.c:164
 kasan_report_double_free+0x5c/0x70 mm/kasan/report.c:185
 kasan_slab_free+0x9d/0xc0 mm/kasan/kasan.c:580
 slab_free_hook mm/slub.c:1357 [inline]
 slab_free_freelist_hook mm/slub.c:1379 [inline]
 slab_free mm/slub.c:2961 [inline]
 kfree+0xe8/0x2b0 mm/slub.c:3882
 tcp_free_fastopen_req net/ipv4/tcp.c:1077 [inline]
 tcp_disconnect+0xc15/0x13e0 net/ipv4/tcp.c:2328
 inet_child_forget+0xb8/0x600 net/ipv4/inet_connection_sock.c:898
 inet_csk_reqsk_queue_add+0x1e7/0x250
net/ipv4/inet_connection_sock.c:928
 tcp_get_cookie_sock+0x21a/0x510 net/ipv4/syncookies.c:217
 cookie_v4_check+0x1a19/0x28b0 net/ipv4/syncookies.c:384
 tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1384 [inline]
 tcp_v4_do_rcv+0x731/0x940 net/ipv4/tcp_ipv4.c:1421
 tcp_v4_rcv+0x2dc0/0x31c0 net/ipv4/tcp_ipv4.c:1715
 ip_local_deliver_finish+0x4cc/0xc20 net/ipv4/ip_input.c:216
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ip_local_deliver+0x1ce/0x700 net/ipv4/ip_input.c:257
 dst_input include/net/dst.h:492 [inline]
 ip_rcv_finish+0xb1d/0x20b0 net/ipv4/ip_input.c:396
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ip_rcv+0xd8c/0x19c0 net/ipv4/ip_input.c:487
 __netif_receive_skb_core+0x1ad1/0x3400 net/core/dev.c:4210
 __netif_receive_skb+0x2a/0x1a0 net/core/dev.c:4248
 process_backlog+0xe5/0x6c0 net/core/dev.c:4868
 napi_poll net/core/dev.c:5270 [inline]
 net_rx_action+0xe70/0x18e0 net/core/dev.c:5335
 __do_softirq+0x2fb/0xb99 kernel/softirq.c:284
 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:899
 </IRQ>
 do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328
 do_softirq kernel/softirq.c:176 [inline]
 __local_bh_enable_ip+0x1cf/0x1e0 kernel/softirq.c:181
 local_bh_enable include/linux/bottom_half.h:31 [inline]
 rcu_read_unlock_bh include/linux/rcupdate.h:931 [inline]
 ip_finish_output2+0x9ab/0x15e0 net/ipv4/ip_output.c:230
 ip_finish_output+0xa35/0xdf0 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:246 [inline]
 ip_output+0x1f6/0x7b0 net/ipv4/ip_output.c:404
 dst_output include/net/dst.h:486 [inline]
 ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124
 ip_queue_xmit+0x9a8/0x1a10 net/ipv4/ip_output.c:503
 tcp_transmit_skb+0x1ade/0x3470 net/ipv4/tcp_output.c:1057
 tcp_write_xmit+0x79e/0x55b0 net/ipv4/tcp_output.c:2265
 __tcp_push_pending_frames+0xfa/0x3a0 net/ipv4/tcp_output.c:2450
 tcp_push+0x4ee/0x780 net/ipv4/tcp.c:683
 tcp_sendmsg+0x128d/0x39b0 net/ipv4/tcp.c:1342
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 SYSC_sendto+0x660/0x810 net/socket.c:1696
 SyS_sendto+0x40/0x50 net/socket.c:1664
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x446059
RSP: 002b:00007faa6761fb58 EFLAGS: 00000282 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000017 RCX: 0000000000446059
RDX: 0000000000000001 RSI: 0000000020ba3fcd RDI: 0000000000000017
RBP: 00000000006e40a0 R08: 0000000020ba4ff0 R09: 0000000000000010
R10: 0000000020000000 R11: 0000000000000282 R12: 0000000000708150
R13: 0000000000000000 R14: 00007faa676209c0 R15: 00007faa67620700
Object at ffff88003b5bbcb8, in cache kmalloc-64 size: 64
Allocated:
PID = 20909
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
 save_stack+0x43/0xd0 mm/kasan/kasan.c:513
 set_track mm/kasan/kasan.c:525 [inline]
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:616
 kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2745
 kmalloc include/linux/slab.h:490 [inline]
 kzalloc include/linux/slab.h:663 [inline]
 tcp_sendmsg_fastopen net/ipv4/tcp.c:1094 [inline]
 tcp_sendmsg+0x221a/0x39b0 net/ipv4/tcp.c:1139
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 SYSC_sendto+0x660/0x810 net/socket.c:1696
 SyS_sendto+0x40/0x50 net/socket.c:1664
 entry_SYSCALL_64_fastpath+0x1f/0xbe
Freed:
PID = 20909
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
 save_stack+0x43/0xd0 mm/kasan/kasan.c:513
 set_track mm/kasan/kasan.c:525 [inline]
 kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:589
 slab_free_hook mm/slub.c:1357 [inline]
 slab_free_freelist_hook mm/slub.c:1379 [inline]
 slab_free mm/slub.c:2961 [inline]
 kfree+0xe8/0x2b0 mm/slub.c:3882
 tcp_free_fastopen_req net/ipv4/tcp.c:1077 [inline]
 tcp_disconnect+0xc15/0x13e0 net/ipv4/tcp.c:2328
 __inet_stream_connect+0x20c/0xf90 net/ipv4/af_inet.c:593
 tcp_sendmsg_fastopen net/ipv4/tcp.c:1111 [inline]
 tcp_sendmsg+0x23a8/0x39b0 net/ipv4/tcp.c:1139
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 SYSC_sendto+0x660/0x810 net/socket.c:1696
 SyS_sendto+0x40/0x50 net/socket.c:1664
 entry_SYSCALL_64_fastpath+0x1f/0xbe

Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets")
Fixes: 7db92362 ("tcp: fix potential double free issue for fastopen_req")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since netif_carrier_on() will do nothing if device's
carrier is already on, so it's unnecessary to do
carrier status check.

It's the same for netif_carrier_off().
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nathan Fontenot says:

====================
ibmvnic: Updated reset handler and code fixes

This set of patches multiple code fixes and a new rest handler
for the ibmvnic driver. In order to implement the new reset handler
for the ibmvnic driver resource initialization needed to be moved to
its own routine, a state variable is introduced to replace the
various is_* flags in the driver, and a new routine to handle the
assorted reasons the driver can be reset.

v4 updates:

Patch 3/11: Corrected trailing whitespace
Patch 7/11: Corrected trailing whitespace

v3 updates:

Patch 10/11: Correct patch subject line to be a description of the patch.

v2 updates:

Patch 11/11: Use __netif_subqueue_stopped() instead of
netif_subqueue_stopped() to avoid possible use of an un-initialized
skb variable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Restart of the subqueue should occur outside of the loop processing
any tx buffers instead of doing this in the middle of the loop.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Map each RX SKB to the RX queue associated with the driver's RX SCRQ.
This should improve the RX CPU load balancing issues seen by the
performance team.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is not a need to stop processing skbs if we encounter a
skb that has a receive completion error.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the check for the driver resetting to the first thing
in ibmvnic_xmit().
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When closing the ibmvnic driver we need to wait for any pending
sub crq entries to ensure they are handled.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When closing the ibmvnic driver, most notably during the reset
path, the tx pools need to be cleaned to ensure there are no
hanging skbs that need to be free'ed.

The need for this was found during debugging a loss of network
traffic after handling a driver reset. The underlying cause was
some skbs in the tx pool that were never free'ed. As a
result the upper network layers never tried a re-send since it
believed the driver still had the skb.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The napi structs allocated at drivier initializatio need to be
free'ed when releasing the drivers resources.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ibmvnic driver has multiple handlers for resetting the driver
depending on the reason the reset is needed (failover, lpm,
fatal erors,...). All of the reset handlers do essentially the same
thing, this patch moves this work to a common reset handler.

By doing this we also allow the driver to better handle situations
where we can get a reset while handling a reset.

The updated reset handling works by adding a reset work item to the
list of resets and then scheduling work to perform the reset. This
step is necessary because we can receive a reset in interrupt context
and we want to handle the reset out of interrupt context.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace the is_closed flag in the ibmvnic adapter strcut with a
more comprehensive state field that tracks the current state of
the driver.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move all of the calls to initialize resources for the driver to
a separate routine.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS/OVS fixes for net

The following patchset contains a rather large batch of Netfilter, IPVS
and OVS fixes for your net tree. This includes fixes for ctnetlink, the
userspace conntrack helper infrastructure, conntrack OVS support,
ebtables DNAT target, several leaks in error path among other. More
specifically, they are:

1) Fix reference count leak in the CT target error path, from Gao Feng.

2) Remove conntrack entry clashing with a matching expectation, patch
   from Jarno Rajahalme.

3) Fix bogus EEXIST when registering two different userspace helpers,
   from Liping Zhang.

4) Don't leak dummy elements in the new bitmap set type in nf_tables,
   from Liping Zhang.

5) Get rid of module autoload from conntrack update path in ctnetlink,
   we don't need autoload at this late stage and it is happening with
   rcu read lock held which is not good. From Liping Zhang.

6) Fix deadlock due to double-acquire of the expect_lock from conntrack
   update path, this fixes a bug that was introduced when the central
   spinlock got removed. Again from Liping Zhang.

7) Safe ct->status update from ctnetlink path, from Liping. The expect_lock
   protection that was selected when the central spinlock was removed was
   not really protecting anything at all.

8) Protect sequence adjustment under ct->lock.

9) Missing socket match with IPv6, from Peter Tirsek.

10) Adjust skb->pkt_type of DNAT'ed frames from ebtables, from
    Linus Luessing.

11) Don't give up on evaluating the expression on new entries added via
    dynset expression in nf_tables, from Liping Zhang.

12) Use skb_checksum() when mangling icmpv6 in IPv6 NAT as this deals
    with non-linear skbuffs.

13) Don't allow IPv6 service in IPVS if no IPv6 support is available,
    from Paolo Abeni.

14) Missing mutex release in error path of xt_find_table_lock(), from
    Dan Carpenter.

15) Update maintainers files, Netfilter section. Add Florian to the
    file, refer to nftables.org and change project status from Supported
    to Maintained.

16) Bail out on mismatching extensions in element updates in nf_tables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If gcc (e.g. 4.1.2) decides not to inline total_extension_size(), the
build will fail with:

    net/built-in.o: In function `nf_conntrack_init_start':
    (.text+0x9baf6): undefined reference to `__compiletime_assert_1893'

or

    ERROR: "__compiletime_assert_1893" [net/netfilter/nf_conntrack.ko] undefined!

Fix this by forcing inlining of total_extension_size().

Fixes: b3a5db10 ("netfilter: conntrack: use u8 for extension sizes again")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

On 32-bit:

    lib/test_bpf.c:4772: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4772: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4773: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4773: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4787: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4787: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4801: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4801: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4802: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4802: warning: integer constant is too large for ‘unsigned long’ type

On 32-bit systems, "long" is only 32-bit.
Replace the "UL" suffix by "ULL" to fix this.

Fixes: 85f68fe8 ("bpf, arm64: implement jiting of BPF_XADD")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for Telit ME910 PID 0x1100.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now tg3 NIC's stats will be cleared after ifdown/ifup. bond_get_stats traverse
its salves to get statistics,cumulative the increment.If a tg3 NIC is added to
bonding as a slave,ifdown/ifup will cause bonding's stats become tremendous value
(ex.1638.3 PiB) because of negative increment.

Fixes: 92feeabf ("tg3: Save stats across chip resets")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

-D__x86_64__ workaround was used to make /usr/include/features.h
to follow expected path through the system include headers.
This is not portable.
Instead define dummy stubs.h which is used by 'clang -target bpf'

Fixes: 6882804c ("selftests/bpf: add a test for overlapping packet range checks")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

With clang/llvm 4.0+, the test case is able to generate
the following pattern:
....
440: (b7) r1 = 15
441: (05) goto pc+73
515: (79) r6 = *(u64 *)(r10 -152)
516: (bf) r7 = r10
517: (07) r7 += -112
518: (bf) r2 = r7
519: (0f) r2 += r1
520: (71) r1 = *(u8 *)(r8 +0)
521: (73) *(u8 *)(r2 +45) = r1
....

commit 332270fd ("bpf: enhance verifier to understand stack
pointer arithmetic") improved verifier to handle such a pattern.
This patch adds a C test case to actually generate such a pattern.
A dummy tracepoint interface is used to load the program
into the kernel.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Small follow-up to d74a32ac ("xdp: use netlink extended ACK reporting")
in order to let drivers all use the same NL_SET_ERR_MSG_MOD() helper macro
for reporting. This also ensures that we consistently add the driver's
prefix for dumping the report in user space to indicate that the error
message is driver specific and not coming from core code. Furthermore,
NL_SET_ERR_MSG_MOD() now reuses NL_SET_ERR_MSG() and thus makes all macros
check the pointer as suggested.

References: https://www.spinics.net/lists/netdev/msg433267.htmlSigned-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrey reported a warning triggered by the rcu code:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 5911 at lib/debugobjects.c:289
debug_print_object+0x175/0x210
ODEBUG: activate active (active state 1) object type: rcu_head hint:
        (null)
Modules linked in:
CPU: 1 PID: 5911 Comm: a.out Not tainted 4.11.0-rc8+ #271
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16
 dump_stack+0x192/0x22d lib/dump_stack.c:52
 __warn+0x19f/0x1e0 kernel/panic.c:549
 warn_slowpath_fmt+0xe0/0x120 kernel/panic.c:564
 debug_print_object+0x175/0x210 lib/debugobjects.c:286
 debug_object_activate+0x574/0x7e0 lib/debugobjects.c:442
 debug_rcu_head_queue kernel/rcu/rcu.h:75
 __call_rcu.constprop.76+0xff/0x9c0 kernel/rcu/tree.c:3229
 call_rcu_sched+0x12/0x20 kernel/rcu/tree.c:3288
 rt6_rcu_free net/ipv6/ip6_fib.c:158
 rt6_release+0x1ea/0x290 net/ipv6/ip6_fib.c:188
 fib6_del_route net/ipv6/ip6_fib.c:1461
 fib6_del+0xa42/0xdc0 net/ipv6/ip6_fib.c:1500
 __ip6_del_rt+0x100/0x160 net/ipv6/route.c:2174
 ip6_del_rt+0x140/0x1b0 net/ipv6/route.c:2187
 __ipv6_ifa_notify+0x269/0x780 net/ipv6/addrconf.c:5520
 addrconf_ifdown+0xe60/0x1a20 net/ipv6/addrconf.c:3672
...

Andrey's reproducer program runs in a very tight loop, calling
'unshare -n' and then spawning 2 sets of 14 threads running random ioctl
calls. The relevant networking sequence:

1. New network namespace created via unshare -n
- ip6tnl0 device is created in down state

2. address added to ip6tnl0
- equivalent to ip -6 addr add dev ip6tnl0 fd00::bb/1
- DAD is started on the address and when it completes the host
  route is inserted into the FIB

3. ip6tnl0 is brought up
- the new fixup_permanent_addr function restarts DAD on the address

4. exit namespace
- teardown / cleanup sequence starts
- once in a blue moon, lo teardown appears to happen BEFORE teardown
  of ip6tunl0
  + down on 'lo' removes the host route from the FIB since the dst->dev
    for the route is loobback
  + host route added to rcu callback list
    * rcu callback has not run yet, so rt is NOT on the gc list so it has
      NOT been marked obsolete

5. in parallel to 4. worker_thread runs addrconf_dad_completed
- DAD on the address on ip6tnl0 completes
- calls ipv6_ifa_notify which inserts the host route

All of that happens very quickly. The result is that a host route that
has been deleted from the IPv6 FIB and added to the RCU list is re-inserted
into the FIB.

The exit namespace eventually gets to cleaning up ip6tnl0 which removes the
host route from the FIB again, calls the rcu function for cleanup -- and
triggers the double rcu trace.

The root cause is duplicate DAD on the address -- steps 2 and 3. Arguably,
DAD should not be started in step 2. The interface is in the down state,
so it can not really send out requests for the address which makes starting
DAD pointless.

Since the second DAD was introduced by a recent change, seems appropriate
to use it for the Fixes tag and have the fixup function only start DAD for
addresses in the PREDAD state which occurs in addrconf_ifdown if the
address is retained.

Big thanks to Andrey for isolating a reliable reproducer for this problem.
Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding support for Microchip LAN9250 Ethernet controller.
Signed-off-by: David Cai <david.cai@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jesper Dangaard Brouer says:

====================
Improve bpf ELF-loader under samples/bpf

This series improves and fixes bpf ELF loader and programs under
samples/bpf.  The bpf_load.c created some hard to debug issues when
the struct (bpf_map_def) used in the ELF maps section format changed
in commit fb30d4b7 ("bpf: Add tests for map-in-map").

This was hotfixed in commit 409526bea3c3 ("samples/bpf: bpf_load.c
detect and abort if ELF maps section size is wrong") by detecting the
issue and aborting the program.

In most situations the bpf-loader should be able to handle these kind
of changes to the struct size.  This patch series aim to do proper
backward and forward compabilility handling when loading ELF files.

This series also adjust the callback that was introduced in commit
9fd63d05 ("bpf: Allow bpf sample programs (*_user.c) to change
bpf_map_def") to use the new bpf_map_data structure, before more users
start to use this callback.

Hoping these changes can make the merge window, as above mentioned
commits have not been merged yet, and it would be good to avoid users
hitting these issues.
====================
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Giving *_user.c side tools access to map_data[] provides easier
access to information on the maps being loaded.  Still provide
the guarantee that the order maps are being defined in inside the
_kern.c file corresponds with the order in the array.  Now user
tools are not blind, but can inspect and verify the maps that got
loaded from the ELF binary.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do this change before others start to use this callback.
Change map_perf_test_user.c which seems to be the only user.

This patch extends capabilities of commit 9fd63d05 ("bpf:
Allow bpf sample programs (*_user.c) to change bpf_map_def").

Give fixup callback access to struct bpf_map_data, instead of
only stuct bpf_map_def.  This add flexibility to allow userspace
to reassign the map file descriptor.  This is very useful when
wanting to share maps between several bpf programs.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch does proper parsing of the ELF "maps" section, in-order to
be both backwards and forwards compatible with changes to the map
definition struct bpf_map_def, which gets compiled into the ELF file.

The assumption is that new features with value zero, means that they
are not in-use.  For backward compatibility where loading an ELF file
with a smaller struct bpf_map_def, only copy objects ELF size, leaving
rest of loaders struct zero.  For forward compatibility where ELF file
have a larger struct bpf_map_def, only copy loaders own struct size
and verify that rest of the larger struct is zero, assuming this means
the newer feature was not activated, thus it should be safe for this
older loader to load this newer ELF file.

Fixes: fb30d4b7 ("bpf: Add tests for map-in-map")
Fixes: 409526bea3c3 ("samples/bpf: bpf_load.c detect and abort if ELF maps section size is wrong")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Needed to adjust max locked memory RLIMIT_MEMLOCK for testing these bpf samples
as these are using more and larger maps than can fit in distro default 64Kbytes limit.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>