- 15 Apr, 2021 4 commits
-
-
Zev Weiss authored
These correspond to the existing lpc_address, sirq, and sirq_polarity sysfs attributes; the second element of aspeed,lpc-interrupts provides a replacement for the deprecated aspeed,sirq-polarity-sense property. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210412034712.16778-5-zev@bewilderbeest.netSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zev Weiss authored
These allow describing all the Aspeed VUART attributes currently available via sysfs. aspeed,lpc-interrupts provides a replacement for the deprecated aspeed,sirq-polarity-sense property. Reviewed-by:
Andrew Jeffery <andrew@aj.id.au> Signed-off-by:
-
Zev Weiss authored
This splits dedicated aspeed_vuart_set_{sirq,lpc_address}() functions out of the sysfs store functions in preparation for adding DT properties that will be poking the same registers. While we're at it, these functions now provide some basic bounds-checking on their arguments. Reviewed-by: -
Zev Weiss authored
This property ties SIRQ polarity to SCU register bits that don't necessarily have any direct relationship to it; the only use of it was removed in commit c82bf6e1 ("ARM: aspeed: g5: Do not set sirq polarity"). Reviewed-by:
Joel Stanley <joel@jms.id.au> Acked-by:
-
- 10 Apr, 2021 22 commits
-
-
Yu Kuai authored
The sparse tool complains as follows: drivers/tty/hvc/hvc_udbg.c:20:19: warning: symbol 'hvc_udbg_dev' was not declared. Should it be static? This symbol is not used outside of hvc_udbg.c, so this commit marks it static. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20210407125826.4139130-1-yukuai3@huawei.comSigned-off-by:
-
Johan Hovold authored
Commit 30004ac9 ("tty: add tty_struct->dev pointer to corresponding device instance") added a struct device pointer field to struct tty_struct which was populated with the corresponding tty class device during initialisation. Unfortunately, not all ttys have a class device (e.g. pseudoterminals and serdev) in which case the device pointer will be set to NULL, something which have bit driver authors over the years. In retrospect perhaps this field should never have been added, but let's at least document the current behaviour. Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210409073512.6876-1-johan@kernel.orgSigned-off-by:
-
Bixuan Cui authored
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by:
Bixuan Cui <cuibixuan@huawei.com> Link: https://lore.kernel.org/r/20210410035048.11466-1-cuibixuan@huawei.comSigned-off-by:
-
Krzysztof Kozlowski authored
Include the generic serial.yaml dtschema so the child node like "bluetooth" will be properly matched: arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml: serial@13800000: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+' Reviewed-by:Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20210409172027.11296-1-krzysztof.kozlowski@canonical.comSigned-off-by:
-
Johan Hovold authored
Drivers can return -ENOIOCTLCMD when an ioctl is not recognised to tell the upper layers to continue looking for a handler. This is not the case for the RS485 and ISO7816 ioctls whose handlers should return -ENOTTY directly in case a serial driver does not implement the corresponding methods. Fixes: a5f276f1 ("serial_core: Handle TIOC[GS]RS485 ioctls.") Fixes: ad8c0eaa ("tty/serial_core: add ISO7816 infrastructure") Signed-off-by:
-
Johan Hovold authored
Since commit 5099d234 ("serial_core: switch to ->[sg]et_serial()") the serial structure passed to uart_get_info() has already have been cleared by the tty layer so drop the redundant memset. Signed-off-by:
-
Johan Hovold authored
Callout devices are long-gone, but the ASYNC_SPLIT_TERMIOS flag was never added to the deprecation mask. Add it so that a warning is printed if it is ever used. Fixes: 8a8ae62f ("tty: warn on deprecated serial flags") Signed-off-by:
-
Johan Hovold authored
Factor out the deprecated serial flags handling and tty-operation check shared with the compat TIOCSSERIAL handler. Signed-off-by:
-
Johan Hovold authored
Use pr_warn_ratelimited() when warning about deprecated serial flags instead of open coding. Signed-off-by:
-
Johan Hovold authored
Drivers should return -ENOTTY ("Inappropriate I/O control operation") when an ioctl isn't supported, while -EINVAL is used for invalid arguments. Support for termiox was added by commit 1d65b4a0 ("tty: Add termiox") in 2008 but no driver support ever followed and it was recently ripped out by commit e0efb316 ("tty: Remove dead termiox code"). Fix the return value for the unsupported termiox ioctls, which have always returned -EINVAL, by explicitly returning -ENOTTY rather than removing them completely and falling back to the default unrecognised- ioctl handling. Fixes: 1d65b4a0 ("tty: Add termiox") Signed-off-by: -
Johan Hovold authored
Drivers should return -ENOTTY ("Inappropriate I/O control operation") when an ioctl isn't supported, while -EINVAL is used for invalid arguments. Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned -EINVAL when a tty driver did not implement the corresponding operations. Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a corresponding Fixes tag below. Fixes: d281da7f ("tty: Make tiocgicount a handler") Signed-off-by: -
Johan Hovold authored
Some kernel-internal ASYNC flags have been superseded by tty-port flags and should no longer be used by kernel drivers. Fix the misspelled "__KERNEL__" compile guards which failed their sole purpose to break out-of-tree drivers that have not yet been updated. Fixes: 5c0517fe ("tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags") Signed-off-by:
-
Xiaofei Tan authored
Remove the repeated word 'the' following advice of checkpatch.pl Signed-off-by:
Xiaofei Tan <tanxiaofei@huawei.com> Link: https://lore.kernel.org/r/1617779210-51576-11-git-send-email-tanxiaofei@huawei.comSigned-off-by:
-
Xiaofei Tan authored
Do not use assignment in if condition following the advice of checkpatch.pl. Signed-off-by:
-
Xiaofei Tan authored
Fix coding style issues of block comments, reported by checkpatch.pl. Signed-off-by:
-
Xiaofei Tan authored
Add a blank line after declarations, reported by checkpatch.pl. Signed-off-by:
-
Xiaofei Tan authored
Fix an issue of code indent should use tabs, reported by checkpatch.pl. Signed-off-by:
-
Xiaofei Tan authored
Remove spaces before tabs following the advice of checkpatch.pl. Signed-off-by:
-
Xiaofei Tan authored
Fix coding style issues of block comments, reported by checkpatch.pl. Besides, do some expression optimization for the sentenses. Signed-off-by:
-
Xiaofei Tan authored
Add a blank line after declarations, reported by checkpatch.pl. Signed-off-by:
-
Xiaofei Tan authored
Fix issues of code indent should use tabs, reported by checkpatch.pl. Signed-off-by:
-
Xiaofei Tan authored
Add a blank line after declarations, reported by checkpatch.pl. Signed-off-by:
-
- 09 Apr, 2021 1 commit
-
-
Andy Shevchenko authored
The commit 8ba59e9d ("misc: pti: Remove driver for deprecated platform") got rid of deprecated drivers under TTY subsystem, but cleaned only one Kconfig entry. Remove Kconfig leftovers. Fixes: 8ba59e9d ("misc: pti: Remove driver for deprecated platform") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210406131615.85432-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
- 07 Apr, 2021 13 commits
-
-
Johan Hovold authored
The port close_delay and closing_wait parameters have already been by tty_port_init() so drop the redundant driver initialisation to the default values. Signed-off-by:
-
Johan Hovold authored
The port close_delay and closing_wait parameters have already been by tty_port_init() so drop the redundant driver initialisation to the default values. Signed-off-by:
-
Johan Hovold authored
Changing the port type and closing_wait parameter are privileged operations so make sure to return -EPERM if a regular user tries to change them. Note that the closing_wait parameter would not actually have been changed but the return value did not indicate that. Cc: stable@vger.kernel.org Signed-off-by:
-
Johan Hovold authored
The port close_delay and closing wait parameters set by TIOCSSERIAL are specified in jiffies, while the values returned by TIOCGSERIAL are specified in centiseconds. Add the missing conversions so that TIOCSSERIAL works as expected also when HZ is not 100. Cc: stable@vger.kernel.org Signed-off-by:
-
Johan Hovold authored
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. A non-privileged user has only ever been able to set the since long deprecated ASYNC_SPD flags and trying to change any other *supported* feature should result in -EPERM being returned. Setting the current values for any supported features should return success. Fix the moxa implementation which was returning -EPERM also for a privileged user when trying to change certain unsupported parameters and instead return success consistently. Signed-off-by:
-
Johan Hovold authored
Changing the port close delay or type are privileged operations so make sure to return -EPERM if a regular user tries to change them. Cc: stable@vger.kernel.org Signed-off-by:
-
Johan Hovold authored
The port close_delay parameter set by TIOCSSERIAL is specified in jiffies, while the value returned by TIOCGSERIAL is specified in centiseconds. Add the missing conversions so that TIOCGSERIAL works as expected also when HZ is not 100. Cc: stable@vger.kernel.org Signed-off-by:
-
Johan Hovold authored
The tty-port close_delay and closing_wait parameters set by TIOCSSERIAL are specified in jiffies, while the values returned by TIOCGSERIAL are specified in centiseconds. Add the missing conversions so that TIOCSSERIAL works as expected also if this code is ever reused on a system where HZ is not 100. Signed-off-by:
-
Johan Hovold authored
Changing the port closing_wait parameter is a privileged operation. Add the missing check to TIOCSSERIAL so that -EPERM is returned in case an unprivileged user tries to change the closing-wait setting. Cc: stable@vger.kernel.org Signed-off-by:
-
Johan Hovold authored
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The type parameter could be used to set the UART type, but is better left unspecified (type unknown) when it isn't used. Note that some applications have historically expected TIOCGSERIAL to be implemented, but judging from the Debian sources, the port type not being PORT_UNKNOWN is only used to check for the existence of legacy serial ports (ttySn). Notably USB serial drivers like ftdi_sio have been using PORT_UNKNOWN for twenty years without any problems. Drop the bogus values provided by the greybus implementation. Signed-off-by:
-
Johan Hovold authored
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. A non-privileged user has only ever been able to set the since long deprecated ASYNC_SPD flags and trying to change any other *supported* feature should result in -EPERM being returned. Setting the current values for any supported features should return success. Fix the greybus implementation which instead indicated that the TIOCSSERIAL ioctl was not even implemented when a non-privileged user set the current values. Fixes: e68453ed ("greybus: uart-gb: now builds, more framework added") Signed-off-by:
-
Johan Hovold authored
The port close_delay and closing_wait parameters set by TIOCSSERIAL are specified in jiffies and not milliseconds. Add the missing conversions so that TIOCSSERIAL works as expected also when HZ is not 1000. Fixes: e68453ed ("greybus: uart-gb: now builds, more framework added") Cc: stable@vger.kernel.org # 4.9 Signed-off-by:
-
Johan Hovold authored
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Fix the fwserial implementation by dropping its custom interpretation of the unused xmit_fifo_size field, which was overflowed with the driver FIFO size. Also leave the type and flags fields unset as these cannot be changed. The close_delay and closing_wait parameters returned by TIOCGSERIAL are specified in centiseconds. The driver does not yet support changing closing_wait, but let's report back the default value actually used (30 seconds). Fixes: 7355ba34 ("staging: fwserial: Add TTY-over-Firewire serial driver") Signed-off-by:
-
