- 15 Aug, 2019 5 commits
-
-
Mika Kuoppala authored
Flush according to what gen11 expects when writing breadcrumbs. As only the seqnowrite + flush differs between engine and gens, enclose the footer to helper. v2: avoid problem of sane local naming by not using them Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Mika Kuoppala authored
On the set of invalidations, we need to add command cache invalidate as a new domain. Signed-off-by:
-
Mika Kuoppala authored
Add tile cache flushing for gen11. To relive us from the burden of previous obsolete workarounds, make a dedicated flush/invalidate callback for gen11. To fortify an independent single flush, do post sync op as there are indications that without it we don't flush everything. This should also make this callback more readily usable in tgl (see l3 fabric flush). v2: whitespacing Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Matthew Auld authored
Dan reported the following static checker warning: drivers/gpu/drm/i915/selftests/i915_buddy.c:670 igt_buddy_alloc_range() error: we previously assumed 'block' could be null (see line 665) Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
Looking around the GT initialisation, we have a few log messages we think are interesting enough present to the user (such as the amount of L4 cache) and a few to inform them of the result of actions or conflicting HW restrictions (i.e. quirks). These are device specific messages, so use the dev family of printk. v2: shave off a few bytes of .rodata! Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190815093604.3618-1-chris@chris-wilson.co.uk
-
- 14 Aug, 2019 6 commits
-
-
Chris Wilson authored
We use the request pointer inside the i915_active_node as the indicator of the barrier's status; we mark it as used during i915_request_add_active_barriers(), and search for an available barrier in reuse_idle_barrier(). That check must be carefully serialised to ensure we do use an engine for the barrier and not just a random pointer. (Along the other reuse path, we are fully serialised by the timeline->mutex.) The acquisition of the barrier itself is ordered through the strong memory barrier in llist_del_all(). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111397 Fixes: d8af05ff ("drm/i915: Allow sharing the idle-barrier from other kernel requests") Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190813200905.11369-1-chris@chris-wilson.co.uk
-
Stuart Summers authored
Use render class instead of RCS0 when printing CCID. Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Reviewed-by:
-
Chris Wilson authored
The fb_base is only used for communicating the GTT BAR from one piece of the display code (kms setup) to another (fbdev). What is required in the fbdev is just the aperture address which should be derived from the bo we allocate for the framebuffer directly. The same appears true for drm/; it is not used by the core or the uAPI, it is merely for conveniently passing a device address from bit of display management code to another. v2: Note that since we only expose enough of a system map to cover our single framebuffer, the screen_base/size and the smem are one and the same. Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190813182112.23227-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Some IGT would like to know the mmio address of each engine so make it available. Signed-off-by:
-
Daniele Ceraolo Spurio authored
The engine->guc_id is GuC FW defined and it is not guaranteed to be below I915_NUM_ENGINES, so we shouldn't use it with the i915-defined client->submissions, as we might overflow. Instead of fixing it, just get rid of client->submissions, because the information we get from it is not interesting anymore now that we only have 1 client. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
-
Rodrigo Vivi authored
Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
- 13 Aug, 2019 17 commits
-
-
José Roberto de Souza authored
A new macro that is going to be added in a further patch will need to adjust the offset returned by _MMIO_TRANS2(), so here adding _TRANS2() and moving most of the implementation of _MMIO_TRANS2() to it and while at it taking the opportunity to rename pipe to trans. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiya@intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiya@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190730224753.14907-2-jose.souza@intel.com
-
José Roberto de Souza authored
Just moving it to reduce the tabs and avoid break code lines. No behavior changes intended here. v2: - Reading misc display IRQ outside of gen8_de_misc_irq_handler() as other irq handlers (Dhinakaran) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
https://github.com/intel/gvt-linuxRodrigo Vivi authored
gvt-next-2019-08-13 - Enhance command parser for extra length check (Fred) - remove debugfs function return check (Greg) - batch buffer end double check after shadow copy (Tina) - one typo fix (Zhenyu) - klocwork warning fix (Zhi) - use struct_size() helper (Gustavo) Signed-off-by:
-
Chris Wilson authored
Stop assuming we only get called with irqs-on for disarming the breadcrumbs, and do a full save/restore spin_lock_irq. Signed-off-by:
-
Chris Wilson authored
If the backend wishes to defer the wakeref parking, make it responsible for unlocking the wakeref (i.e. bumping the counter). This allows it to time the unlock much more carefully in case it happens to needs the wakeref to be active during its deferral. For instance, during engine parking we may choose to emit an idle barrier (a request). To do so, we borrow the engine->kernel_context timeline and to ensure exclusive access we keep the engine->wakeref.count as 0. However, to submit that request to HW may require a intel_engine_pm_get() (e.g. to keep the submission tasklet alive) and before we allow that we have to rewake our wakeref to avoid a recursive deadlock. <4> [257.742916] IRQs not enabled as expected <4> [257.742930] WARNING: CPU: 0 PID: 0 at kernel/softirq.c:169 __local_bh_enable_ip+0xa9/0x100 <4> [257.742936] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 btusb btrtl btbcm btintel snd_hda_intel snd_intel_nhlt bluetooth snd_hda_codec coretemp snd_hwdep crct10dif_pclmul snd_hda_core crc32_pclmul ecdh_generic ecc ghash_clmulni_intel snd_pcm r8169 realtek lpc_ich prime_numbers i2c_hid <4> [257.742991] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G U W 5.3.0-rc3-g5d0a06cd532c-drmtip_340+ #1 <4> [257.742998] Hardware name: GIGABYTE GB-BXBT-1900/MZBAYAB-00, BIOS F6 02/17/2015 <4> [257.743008] RIP: 0010:__local_bh_enable_ip+0xa9/0x100 <4> [257.743017] Code: 37 5b 5d c3 8b 80 50 08 00 00 85 c0 75 a9 80 3d 0b be 25 01 00 75 a0 48 c7 c7 f3 0c 06 ac c6 05 fb bd 25 01 01 e8 77 84 ff ff <0f> 0b eb 89 48 89 ef e8 3b 41 06 00 eb 98 e8 e4 5c f4 ff 5b 5d c3 <4> [257.743025] RSP: 0018:ffffa78600003cb8 EFLAGS: 00010086 <4> [257.743035] RAX: 0000000000000000 RBX: 0000000000000200 RCX: 0000000000010302 <4> [257.743042] RDX: 0000000080010302 RSI: 0000000000000000 RDI: 00000000ffffffff <4> [257.743050] RBP: ffffffffc0494bb3 R08: 0000000000000000 R09: 0000000000000001 <4> [257.743058] R10: 0000000014c8f0e9 R11: 00000000fee2ff8e R12: ffffa23ba8c38008 <4> [257.743065] R13: ffffa23bacc579c0 R14: ffffa23bb7db0f60 R15: ffffa23b9cc8c430 <4> [257.743074] FS: 0000000000000000(0000) GS:ffffa23bbba00000(0000) knlGS:0000000000000000 <4> [257.743082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [257.743089] CR2: 00007fe477b20778 CR3: 000000011f72a000 CR4: 00000000001006f0 <4> [257.743096] Call Trace: <4> [257.743104] <IRQ> <4> [257.743265] __i915_request_commit+0x240/0x5d0 [i915] <4> [257.743427] ? __i915_request_create+0x228/0x4c0 [i915] <4> [257.743584] __engine_park+0x64/0x250 [i915] <4> [257.743730] ____intel_wakeref_put_last+0x1c/0x70 [i915] <4> [257.743878] i915_sample+0x2ee/0x310 [i915] <4> [257.744030] ? i915_pmu_cpu_offline+0xb0/0xb0 [i915] <4> [257.744040] __hrtimer_run_queues+0x11e/0x4b0 <4> [257.744068] hrtimer_interrupt+0xea/0x250 <4> [257.744079] ? lockdep_hardirqs_off+0x79/0xd0 <4> [257.744101] smp_apic_timer_interrupt+0x96/0x280 <4> [257.744114] apic_timer_interrupt+0xf/0x20 <4> [257.744125] RIP: 0010:__do_softirq+0xb3/0x4ae v2: Keep the priority_hint assert v3: That assert was desperately trying to point out my bug. Sorry, little assert. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111378Signed-off-by:
-
José Roberto de Souza authored
In this case we want to apply the mask and then shift so the parentheses is needed. SPANK! SPANK! SPANK! Naughty programmer! Fixes: 9749a5b6 ("drm/i915/tgl: Fix the read of the DDI that transcoder is attached to") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Tina Zhang authored
Double check the end of the privilege buffer to make sure the size of the privilege buffer remains unchanged after copy. v4: - Refine the commit message. (Zhenyu) v3: - To get the right offset of the batch buffer end cmd. (Yan) v2: - Use lightweight way to audit batch buffer end. (Yan) Reviewed-by:
Yan Zhao <yan.y.zhao@intel.com> Signed-off-by:
Tina Zhang <tina.zhang@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Gao, Fred authored
Add valid length check for the commands with variable length. v2: remove the macro definition. (Zhenyu) v3: refine the LRI command. (Zhenyu) Reviewed-by:
Gao, Fred <fred.gao@intel.com> Signed-off-by:
-
Gao, Fred authored
Add the constant valid length of MI command. v2: Add F_VAL_CONST flag. (Zhenyu Wang) Reviewed-by:
-
Gao, Fred authored
Add utility for valid command length check. v2: Add F_VAL_CONST flag to identify the value is const although LEN maybe variable. (Zhenyu) v3: unused code removal, flag rename/conflict. (Zhenyu) v4: redefine F_IP_ADVANCE_CUSTOM and move the check function to next patch. (Zhenyu) Reviewed-by: -
Zhi Wang authored
Factor out tlb and mocs register offset table to fix the issues reported by klocwork, #512 and #550. Mostly, the reason why the klocwork reports these problems is because there can be possbilities for platforms, which have more rings than the ring offset table, to take the dirty data from the stack as the register offset. It results to a random HW register offset writting in this scenairo when doing context switch between vGPUs. After the factoring, the ring offset table of TLB and MOCS should be per platform. v2: - Enable TLB register switch for GEN8. (Zhenyu) Reviewed-by:
Zhi Wang <zhi.a.wang@intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Because there is no need to check these functions, a number of local functions can be made to return void to simplify things as nothing can fail. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gvt-dev@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Zhenyu Wang authored
This fixes typo for VBLANK_TIMER_PERIOD. Reviewed-by:
Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
We don't care about internal firmware status changes unless we are doing some real debugging. Note that our CI is not using DRM_I915_DEBUG_GUC config by default so use it. v2: protect against accidental overwrites (Chris) Signed-off-by:
-
Chris Wilson authored
Since execlists and the guc have diverged in their port tracking, we cannot simply reuse the execlists cancellation code as it leads to unbalanced reference counting. Use a local, simpler routine for the guc. Signed-off-by:
-
Daniele Ceraolo Spurio authored
The last user has been removed, so drop the functions. Signed-off-by:
-
Daniele Ceraolo Spurio authored
We rely on the tasklet to update the GT PM refcount, so we can't disable it even if we've processed all the requests for the engine because we might have detected the request completion before the interrupt arrived. Since on all platforms on which we plan to support guc submission we don't allow disabling the breadcrumb interrupts, we can further siplify the park/unpark flow by removing the interrupt pin/unpin. A BUG_ON has been added to catch changes to this flow that would require us to restore some kind of pinning. v2: split removal of engine_pin/unpin_breadcrumbs_irq to its own patch (chris) Signed-off-by:
-
- 12 Aug, 2019 12 commits
-
-
Chris Wilson authored
Remove the raw i915_active_request tracking in favour of the higher level i915_active tracking for the sole purpose of making the lockless transition easier in later patches. Signed-off-by:
-
Chris Wilson authored
We were using the last_fence to track the last request that used this vma that might be interpreted by a fence register and forced ourselves to wait for this request before modifying any fence register that overlapped our vma. Due to requirement that we need to track any XY_BLT command, linear or tiled, this in effect meant that we have to track the vma for its active lifespan anyway, so we can forgo the explicit last_fence tracking and just use the whole vma->active. Another solution would be to pipeline the register updates, and would help resolve some long running stalls for gen3 (but only gen 2 and 3!) Signed-off-by:
-
Andi Shyti authored
i915_irq.c is large. It serves as the central dispatch and handler for all of our device interrupts. Lets break it up by pulling out the GT interrupt handlers. Based on a patch by Chris Wilson. Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Reviewed-by:
-
Andi Shyti authored
i915_irq.c is large. It serves as the central dispatch and handler for all of our device interrupts. Pull out the GT pm interrupt handling (leaving the central dispatch) so that we can encapsulate the logic a little better. Based on a patch by Chris Wilson. Signed-off-by:
-
Chris Wilson authored
Now that we can atomically acquire the engine wakeref, make use of it when check whether the RING registers are idle. Signed-off-by:
-
Chris Wilson authored
When testing whether we prevent suppressing preemption, it helps to avoid a time slice expiring prematurely. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111108Signed-off-by:
-
Chris Wilson authored
Since we allow ourselves to use non-process context during parking, we cannot allow ourselves to sleep and in particular cannot call del_timer_sync() -- but we can use a plain del_timer(). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111375Signed-off-by:
-
Michal Wajdeczko authored
Include 2019 in copyright years and start using SPDX tag. Signed-off-by:
-
Anshuman Gupta authored
The DDI-IO power wells (PWR_WELL_CTL_DDI) are backing the IO/PHY functionality, which doesn't need the PG3 power power well. Accordingly fixing up the list of PG3 power domains. Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Anshuman Gupta authored
The DDI-IO power wells (PWR_WELL_CTL_DDI) are backing the IO/PHY functionality, which doesn't need the PG3 power power well. Accordingly fixing up the list of PG3 power domains. v2: Removed "DDI E/F IO"power domain as well [Imre] Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Michal Wajdeczko authored
Since commit 6ca9a2be ("drm/i915: Unwind i915_gem_init() failure") we believed that we correctly handle all errors encountered during GuC initialization, including special one that indicates request to run driver with disabled GPU submission (-EIO). Unfortunately since commit 121981fa ("drm/i915/guc: Combine enable_guc_loading|submission modparams") we stopped using that error code to avoid unwanted fallback to execlist submission mode. In result any GuC initialization failure was treated as non-recoverable error leading to driver load abort, so we could not even read related GuC error log to investigate cause of the problem. For now always return -EIO on any uC hardware related failure. Signed-off-by:
-
Michal Wajdeczko authored
Our old messages were redundant or misleading (as loaded is not the same as running). Keep only one message for debug. Signed-off-by:
-
