Skip to content

L
linux
Switch branch/tag
  1. 21 Jun, 2017 2 commits
  3. 20 Jun, 2017 20 commits
  5. 19 Jun, 2017 4 commits
    • Leo Yan's avatar
      clk: Hi3660: register fixed_rate_clks with CLK_OF_DECLARE_DRIVER · a925810f
      Leo Yan authored 
      The timer will register into system at very early phase at kernel boot;
if timer needs to use clock, the clock should be get ready in function
of_clk_init() so later the timer driver probe can retrieve clock
successfully. This is finished in below flow on arm64:

  start_kernel()
    `-> time_init()
          `-> of_clk_init(NULL)    => register timer's clock
          `-> clocksource_probe()  => register timer

On Hi3660 the sp804 timer uses clock "osc32k", this clock is registered
as platform driver rather than CLK_OF_DECLARE_DRIVER method. As result,
sp804 timer probe returns failure due if cannot bind clock properly.

To fix the failure, this patch is to split crgctrl clocks into two
subsets. One part is for fixed_rate_clks which includes pre-defined
fixed rate clocks, and "osc32k" clock is in this category; So we change
their registration to CLK_OF_DECLARE_DRIVER method, as result the clocks
can be registered ahead with function of_clk_init() and timer driver can
bind timer clock successfully; the rest of the crgctrl clocks are still
registered by the probe of the platform driver.

This patch also adds checking for all crgctrl clocks registration and
print out log if any clock has failure.
Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
      a925810f
    • Konstantin Porotchkin's avatar
      clk: mvebu: cp110: add sdio clock to cp-110 system controller · a45af6d3
      Konstantin Porotchkin authored 
      This commit updates the CP110 system controller driver to add the
definition for a missing clock.

The SDIO clock is dedicated driving the SDHCI interface and its frequency
is 400MHz (2/5 of PLL source clock).

The SDIO interface should be bound to this clock and not the core clock
as in the older code.
Using the wrong clock lead to a maximum SDHCI frequency of 250 Mhz, while
the HW really supports up to 400 Mhz.

This patch also fixes the NAND clock relationship documentation.
Signed-off-by: default avatarKonstantin Porotchkin <kostap@marvell.com>
[gregory.clement@free-electrons.com:
- use sdio instead of emmc to name the clock]
Reviewed-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      a45af6d3
    • Gregory CLEMENT's avatar
      clk: mvebu: cp110: introduce a new binding · 5ffeb5f5
      Gregory CLEMENT authored 
      The initial intent when the binding of the cp110 system controller was to
have one flat node. The idea being that what is currently a clock-only
driver in drivers would become a MFD driver, exposing the clock, GPIO and
pinctrl functionality. However, after taking a step back, this would lead
to a messy binding. Indeed, a single node would be a GPIO controller,
clock controller, pinmux controller, and more.

This patch adopts a more classical solution of a top-level syscon node
with sub-nodes for the individual devices. The main benefit will be to
have each functional block associated to its own sub-node where we can
put its own properties.

The introduction of the Armada 7K/8K is still in the early stage so the
plan is to remove the old binding. However, we don't want to break the
device tree compatibility for the few devices already in the field. For
this we still keep the support of the legacy compatible string with a big
warning in the kernel about updating the device tree.
Reviewed-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      5ffeb5f5
    • Gregory CLEMENT's avatar
      clk: mvebu: cp110: do not depend anymore of the *-clock-output-names · f5667274
      Gregory CLEMENT authored 
      Using the *-clock-output-names property was a convenient way to have a
unique name for each clock even when there are multiple cp110 blocks
as we can find on Armada 8K.

However it has some drawbacks: the main one being a stronger link than
necessary between the driver and the device tree. For example the clock
name can't be changed, removed or moved. It is still the early stage of
introduction of the Armada 7K/8K and the hardware is still not totally
documented, especially for the clock part. By removing the use of
*-clock-output-names it will be easier to add new clocks without breaking
the compatibility.

The name of each clock is now created by using its physical address as a
prefix (as it was done for the platform device names). Thanks to this we
have an automatic way to compute a unique name.
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      f5667274
  7. 16 Jun, 2017 6 commits
  9. 15 Jun, 2017 4 commits
    • Tero Kristo's avatar
      clk: ti: omap4: add clkctrl clock data · 1c881b5a
      Tero Kristo authored 
      Add data for omap4 clkctrl clocks, and register it within the clkctrl
driver.
Signed-off-by: default avatarTero Kristo <t-kristo@ti.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
      1c881b5a
    • Tero Kristo's avatar
      dt-bindings: clk: add omap4 clkctrl definitions · 70ab980f
      Tero Kristo authored 
      Contains offsets for all omap4 clkctrl main and optional clocks.
Signed-off-by: default avatarTero Kristo <t-kristo@ti.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
      70ab980f
    • Tero Kristo's avatar
      clk: ti: add support for clkctrl clocks · 88a17252
      Tero Kristo authored 
      Previously, hwmod core has been used for controlling the hwmod level
clocks directly. This has certain drawbacks, like being unable to share
the clocks for multiple users, missing usecounting and generally being
totally incompatible with the common clock framework.

This patch adds support for clkctrl clocks for addressing the above
issues. These support the modulemode handling, which will replace the
direct hwmod clkctrl linkage. Any optional clocks are also supported,
gate, mux and divider.
Signed-off-by: default avatarTero Kristo <t-kristo@ti.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
      88a17252
    • Tony Lindgren's avatar
      Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks · 35395a9c
      Tony Lindgren authored 
      Texas Instruments omap variant SoCs starting with omap4 have a clkctrl
clock controller instance for each interconnect target module. The clkctrl
controls functional and interface clocks for the module.

The clkctrl clocks are currently handled by arch/arm/mach-omap2 hwmod code.
With this binding and a related clock device driver we can start moving the
clkctrl clock handling to live in drivers/clk/ti.

Note that this binding allows keeping the clockdomain related parts out of
drivers/clock. The CLKCTCTRL and DYNAMICDEP registers can be handled by
a separate driver in drivers/soc/ti and genpd. If the clockdomain driver
needs to know it's clocks, we can just set the the clkctrl device
instances to be children of the related clockdomain device.

Each clkctrl clock can have multiple optional gate clocks, and multiple
optional mux clocks. To represent this in device tree, it seems that
it is best done using four clock cells #clock-cells = <2> property.

The reasons for using #clock-cells = <2> are:

1. We need to specify the clkctrl offset from the instance base. Otherwise
   we end up with a large number of device tree nodes that need to be
   patched when new clocks are discovered in a clkctrl clock with minor
   hardware revision changes for example

2. On omap5 CM_L3INIT_USB_HOST_HS_CLKCTRL has ten OPTFCLKEN bits. So we
   need to use a separate cell for optional gate clocks to avoid address
   space conflicts

There is probably no need to list input clocks for each clkctrl clock
instance in the binding. If we want to add them, the standard clocks
binding can be used for that.

For hardware reference, see omap4430 TRM "Table 3-1312. L4PER_CM2 Registers
Mapping Summary" for example. It shows one instance of a clkctrl clock
controller with multiple clkctrl registers.

Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarTero Kristo <t-kristo@ti.com>
      35395a9c
  11. 14 Jun, 2017 4 commits
    • Stephen Boyd's avatar
      Merge branch 'clk-fixes' into clk-next · 9c861f33
      Stephen Boyd authored 
      * clk-fixes:
  clk: sunxi-ng: a64: Export PLL_PERIPH0 clock for the PRCM
  clk: sunxi-ng: h3: Export PLL_PERIPH0 clock for the PRCM
  dt-bindings: clock: sunxi-ccu: Add pll-periph to PRCM's needed clocks
  clk: sunxi-ng: enable SUNXI_CCU_MP for PRCM
  clk: sunxi-ng: v3s: Fix usb otg device reset bit
  clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset
      9c861f33
    • Stephen Boyd's avatar
      Merge tag 'sunxi-clk-fixes-for-4.12' of... · 949bdfed
      Stephen Boyd authored 
      Merge tag 'sunxi-clk-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes

Allwinner clock fixes for 4.12

Some fixes that fix some bindings that went in 4.12, fix a few reset and
clock offsets and a build error fix

* tag 'sunxi-clk-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi-ng: a64: Export PLL_PERIPH0 clock for the PRCM
  clk: sunxi-ng: h3: Export PLL_PERIPH0 clock for the PRCM
  dt-bindings: clock: sunxi-ccu: Add pll-periph to PRCM's needed clocks
  clk: sunxi-ng: enable SUNXI_CCU_MP for PRCM
  clk: sunxi-ng: v3s: Fix usb otg device reset bit
  clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset
      949bdfed
    • Stephen Boyd's avatar
      Merge tag 'clk-v4.13-samsung' of... · 7f274d54
      Stephen Boyd authored 
      Merge tag 'clk-v4.13-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-next

Pull samsung clk driver updates from Sylwester Nawrocki

 - conversion to the clk_hw API
 - definitions and fixes of exynos5420 SoC audio subsystem
   related clocks

* tag 'clk-v4.13-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk:
  clk: samsung: exynos542x: Add EPLL rate table
  clk: samsung: Add missing exynos5420 audio related clocks
  clk: samsung: Add enable/disable operation for PLL36XX clocks
  clk: samsung: s5pv210-audss: Convert to the new clk_hw API
  clk: samsung: exynos-clkout: Convert to the new clk_hw API
  clk: samsung: exynos-audss: Convert to the new clk_hw API
  clk: samsung: Convert common drivers to the new clk_hw API
  clk: samsung: Add local variable to match its purpose
  clk: samsung: Remove dead code
      7f274d54
    • Stephen Boyd's avatar
      Merge tag 'v4.13-rockchip-clk1' of... · c96da4dd
      Stephen Boyd authored 
      Merge tag 'v4.13-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

Pull rockchip clk driver updates from Heiko Stuebner:

One new clock controller for the rk3128 soc, a fixup for the rk3228 cpuclk
table and the usual bunch of some new clock-ids and some clocks marked as
critical.

* tag 'v4.13-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: mark some special clk as critical on rk3368
  clk: rockchip: mark noc and some special clk as critical on rk3288
  clk: rockchip: mark noc and some special clk as critical on rk3228
  clk: rockchip: mark pclk_ddrupctl as critical_clock on rk3036
  clk: rockchip: add clock controller for rk3128
  dt-bindings: add bindings for rk3128 clock controller
  clk: rockchip: export more rk3228 clocks ids
  clk: rockchip: add ids for rk3399 testclks used for camera handling
  clk: rockchip: add dt-binding header for rk3128
  clk: rockchip: fix up the RK3228 clk cpu setting table
  clk: rockchip: add clock-ids for more rk3228 clocks
  clk: rockchip: add ids for camera on rk3399
      c96da4dd
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7