1. 30 Jan, 2016 15 commits
  2. 29 Jan, 2016 22 commits
    • Kefeng Wang's avatar
      ptp: ixp46x: use helpers for converting ns to timespec · b83ef507
      Kefeng Wang authored
      Convert the driver to use ns_to_timespec64() and timespec64_to_ns()
      instead of open coding the same logic.
      Signed-off-by: default avatarKefeng Wang <wangkefeng.wang@huawei.com>
      Acked-by: default avatarRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b83ef507
    • Jörg Thalheim's avatar
    • Nikolay Aleksandrov's avatar
      macvlan: make operstate and carrier more accurate · de7d244d
      Nikolay Aleksandrov authored
      Currently when a macvlan is being initialized and the lower device is
      netif_carrier_ok(), the macvlan device doesn't run through
      rfc2863_policy() and is left with UNKNOWN operstate. Fix it by adding an
      unconditional linkwatch event for the new macvlan device. Similar fix is
      already used by the 8021q device (see register_vlan_dev()). Also fix the
      inconsistent state when the lower device has been down and its carrier
      was changed (when a device is down NETDEV_CHANGE doesn't get generated).
      The second issue can be seen f.e. when we have a macvlan on top of a 8021q
      device which has been down and its real device has been changing carrier
      states, after setting the 8021q device up, the macvlan device will have
      the same carrier state as it was before even though the 8021q can now
      have a different state.
      Example for case 1:
      4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
      state UP mode DEFAULT group default qlen 1000
      
      $ ip l add l eth2 macvl0 type macvlan
      $ ip l set macvl0 up
      $ ip l sh macvl0
      72: macvl0@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
      noqueue state UNKNOWN mode DEFAULT group default
          link/ether f6:0b:54:0a:9d:a3 brd ff:ff:ff:ff:ff:ff
      
      Example for case 2 (order is important):
      Prestate: eth2 UP/CARRIER, vlan1 down, vlan1-macvlan down
      $ ip l set vlan1-macvlan up
      $ ip l sh vlan1-macvlan
      71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
      qdisc noqueue state UNKNOWN mode DEFAULT group default
          link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff
      
      [ eth2 loses CARRIER before vlan1 has been UP-ed ]
      
      $ ip l sh eth2
      4: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
      state DOWN mode DEFAULT group default qlen 1000
          link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff
      $ ip l sh vlan1-macvlan
      71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
      qdisc noqueue state UNKNOWN mode DEFAULT group default
          link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff
      $ ip l set vlan1 up
      $ ip l sh vlan1
      70: vlan1@eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
      noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
          link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff
      $ ip l sh vlan1-macvlan
      71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
      qdisc noqueue state UNKNOWN mode DEFAULT group default
          link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff
      
      vlan1-macvlan is still UP, still has carrier and is still in the same
      operstate as before. After the patch in case 1 macvl0 has state UP as it
      should and in case 2 vlan1-macvlan has state LOWERLAYERDOWN again as it
      should. Note that while the lower macvlan device is down their carrier
      and thus operstate can go out of sync but that will be fixed once the
      lower device goes up again.
      This behaviour seems to have been present since beginning of git history.
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      de7d244d
    • Parthasarathy Bhuvaragan's avatar
      tipc: fix connection abort during subscription cancel · 4d5cfcba
      Parthasarathy Bhuvaragan authored
      In 'commit 7fe8097c ("tipc: fix nullpointer bug when subscribing
      to events")', we terminate the connection if the subscription
      creation fails.
      In the same commit, the subscription creation result was based on
      the value of the subscription pointer (set in the function) instead
      of the return code.
      
      Unfortunately, the same function tipc_subscrp_create() handles
      subscription cancel request. For a subscription cancellation request,
      the subscription pointer cannot be set. Thus if a subscriber has
      several subscriptions and cancels any of them, the connection is
      terminated.
      
      In this commit, we terminate the connection based on the return value
      of tipc_subscrp_create().
      Fixes: commit 7fe8097c ("tipc: fix nullpointer bug when subscribing to events")
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4d5cfcba
    • Kefeng Wang's avatar
      net: cavium: liquidio: use helpers ns_to_timespec64() · 286af315
      Kefeng Wang authored
      Convert the driver to use ns_to_timespec64() to keep consistency
      with timespec64_to_ns() instead of open coding the same logic.
      Signed-off-by: default avatarKefeng Wang <wangkefeng.wang@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      286af315
    • Eric Dumazet's avatar
      ipv4: early demux should be aware of fragments · 63e51b6a
      Eric Dumazet authored
      We should not assume a valid protocol header is present,
      as this is not the case for IPv4 fragments.
      
      Lets avoid extra cache line misses and potential bugs
      if we actually find a socket and incorrectly uses its dst.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      63e51b6a
    • David S. Miller's avatar
      Merge branch 'phylib-regressions-part-2' · b6443885
      David S. Miller authored
      Andrew Lunn says:
      
      ====================
      Part 2 of v4.5-rc1 phylib regression
      
      White list PHY compatible values which indicate PHYs.  Issue a warning
      when one is encountered.
      
      Update the documentation to make it clear what is expected in the
      compatible string.
      
      v2:
      Fix Grammar, reword changelog, add Tested-by and Acked-by.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b6443885
    • Andrew Lunn's avatar
      DT: phy.txt: Clarify expected compatible values · e4bf797a
      Andrew Lunn authored
      PHY devices may only list compatibility with clause 22, 45, and if
      they need to be more specific, their PHY identifier values. No other
      compatible strings are allowed.  Make this clear in the documentation,
      and remove examples where make/model compatible strings are listed.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e4bf797a
    • Andrew Lunn's avatar
      of: of_mdio: Add a whitelist of PHY compatibilities. · ae461131
      Andrew Lunn authored
      Some phy nodes list a compatible value indicating the PHY make/model.
      This is never used to match the device to the driver. However it does
      confuse the code to separate a PHY from a generic MDIO device like a
      switch. Generic MDIO devices must have a compatible value, PHYs can
      list clause 22 or 45, but nothing else.
      
      Issue a warning if we find a compatible value known on the whitelist,
      and say it is a PHY.
      
      Fixes: a9049e0c ("mdio: Add support for mdio drivers.")
      Reported-by: default avatarAaro Koskinen <aaro.koskinen@nokia.com>
      Reported-by: default avatarOlof Johansson <olof@lixom.net>
      Tested-by: default avatarAaro Koskinen <aaro.koskinen@nokia.com>
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ae461131
    • David S. Miller's avatar
      Merge branch 'lan78xx-fixes' · a77ce1bc
      David S. Miller authored
      Woojung Huh says:
      
      ====================
      lan78xx: update and fixes
      
        lan78xx: change to use updated phy-ignore-interrupts
        lan78xx: Add to handle mux control per chip id
        lan78xx: throttle TX path at slower than SuperSpeed USB
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a77ce1bc
    • Woojung.Huh@microchip.com's avatar
      lan78xx: throttle TX path at slower than SuperSpeed USB · 4b2a4a96
      Woojung.Huh@microchip.com authored
      Throttle TX path only at slower than SuperSpeed USB.
      SuperSpeed USB has enough bandwidth to maintain GigE.
      Signed-off-by: default avatarWoojung Huh <woojung.huh@microchip.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4b2a4a96
    • Woojung.Huh@microchip.com's avatar
      lan78xx: Add to handle mux control per chip id · a0db7d10
      Woojung.Huh@microchip.com authored
      Depends on chip, some EEPROM pins are muxed with LED function.
      Disable & restore LED function to access EEPROM.
      Signed-off-by: default avatarWoojung Huh <woojung.huh@microchip.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a0db7d10
    • Woojung.Huh@microchip.com's avatar
      lan78xx: change to use updated phy-ignore-interrupts · e4953910
      Woojung.Huh@microchip.com authored
      Update lan78xx to use patch of commit 4f2aaf7d
      ("Merge branch 'fix-phy-ignore-interrupts'").
      Signed-off-by: default avatarWoojung Huh <woojung.huh@microchip.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e4953910
    • Eric Dumazet's avatar
      tcp: beware of alignments in tcp_get_info() · ff5d7497
      Eric Dumazet authored
      With some combinations of user provided flags in netlink command,
      it is possible to call tcp_get_info() with a buffer that is not 8-bytes
      aligned.
      
      It does matter on some arches, so we need to use put_unaligned() to
      store the u64 fields.
      
      Current iproute2 package does not trigger this particular issue.
      
      Fixes: 0df48c26 ("tcp: add tcpi_bytes_acked to tcp_info")
      Fixes: 977cb0ec ("tcp: add pacing_rate information into tcp_info")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ff5d7497
    • Ido Schimmel's avatar
      switchdev: Require RTNL mutex to be held when sending FDB notifications · 4f2c6ae5
      Ido Schimmel authored
      When switchdev drivers process FDB notifications from the underlying
      device they resolve the netdev to which the entry points to and notify
      the bridge using the switchdev notifier.
      
      However, since the RTNL mutex is not held there is nothing preventing
      the netdev from disappearing in the middle, which will cause
      br_switchdev_event() to dereference a non-existing netdev.
      
      Make switchdev drivers hold the lock at the beginning of the
      notification processing session and release it once it ends, after
      notifying the bridge.
      
      Also, remove switchdev_mutex and fdb_lock, as they are no longer needed
      when RTNL mutex is held.
      
      Fixes: 03bf0c28 ("switchdev: introduce switchdev notifier")
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4f2c6ae5
    • Malcolm Crossley's avatar
      xen-netfront: request Tx response events more often · 7d0105b5
      Malcolm Crossley authored
      Trying to batch Tx response events results in poor performance because
      this delays freeing the transmitted skbs.
      
      Instead use the standard RING_FINAL_CHECK_FOR_RESPONSES() macro to be
      notified once the next Tx response is placed on the ring.
      Signed-off-by: default avatarMalcolm Crossley <malcolm.crossley@citrix.com>
      Signed-off-by: default avatarDavid Vrabel <david.vrabel@citrix.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7d0105b5
    • Nicolas Schichan's avatar
      net: mv643xx_eth: fix packet corruption with TSO and tiny unaligned packets. · 3b89624a
      Nicolas Schichan authored
      The code in txq_put_data() would use txq->tx_curr_desc to index the
      tso_hdrs/tso_hdrs_dma buffers, for less than 8 bytes unaligned
      fragments, which is already moved to the next descriptor at the
      beginning of the function.
      
      If that fragment was the last of the the skb, the next skb would use
      that same space to place the ip headers, overwritting that small
      fragment data.
      
      Fixes: 91986fd3 (net: mv643xx_eth: Ensure proper data alignment in TSO TX path)
      Signed-off-by: default avatarNicolas Schichan <nschichan@freebox.fr>
      Reviewed-by: default avatarPhilipp Kirchhofer <philipp@familie-kirchhofer.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3b89624a
    • Andrew Lunn's avatar
      of: of_mdio: Ensure mdio device is a PHY · 6ed74236
      Andrew Lunn authored
      of_phy_find_device() is used to find the phy device associated with a
      device node. It is expected the node is for a PHY device, but in fact
      it could of been probed as a generic MDIO device. Ensure the device is
      a PHY before returning it.
      
      Fixes: a9049e0c ("mdio: Add support for mdio drivers.")
      Reported-by: default avatarAaro Koskinen <aaro.koskinen@nokia.com>
      Reported-by: default avatarOlof Johansson <olof@lixom.net>
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Tested-by: default avatarAaro Koskinen <aaro.koskinen@nokia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6ed74236
    • David S. Miller's avatar
      Merge tag 'mac80211-for-davem-2016-01-26' of... · bd7c5e31
      David S. Miller authored
      Merge tag 'mac80211-for-davem-2016-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
      
      Johannes Berg says:
      
      ====================
      Here's a first set of fixes for the 4.5-rc cycle:
       * make regulatory messages much less verbose by default
       * various remain-on-channel fixes
       * scheduled scanning fixes with hardware restart
       * a PS-Poll handling fix; was broken just recently
       * bugfix to avoid buffering non-bufferable MMPDUs
       * world regulatory domain data fix
       * a fix for scanning causing other work to get stuck
       * hwsim: revert an older problematic patch that caused some
         userspace tools to have issues - not that big a deal as
         it's a debug only driver though
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bd7c5e31
    • Richard Weinberger's avatar
      net: Fix dependencies for !HAS_IOMEM archs · c731f0e3
      Richard Weinberger authored
      Not every arch has io memory.
      So, unbreak the build by fixing the dependencies.
      Signed-off-by: default avatarRichard Weinberger <richard@nod.at>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c731f0e3
    • Neal Cardwell's avatar
      tcp: fix tcp_mark_head_lost to check skb len before fragmenting · d88270ee
      Neal Cardwell authored
      This commit fixes a corner case in tcp_mark_head_lost() which was
      causing the WARN_ON(len > skb->len) in tcp_fragment() to fire.
      
      tcp_mark_head_lost() was assuming that if a packet has
      tcp_skb_pcount(skb) of N, then it's safe to fragment off a prefix of
      M*mss bytes, for any M < N. But with the tricky way TCP pcounts are
      maintained, this is not always true.
      
      For example, suppose the sender sends 4 1-byte packets and have the
      last 3 packet sacked. It will merge the last 3 packets in the write
      queue into an skb with pcount = 3 and len = 3 bytes. If another
      recovery happens after a sack reneging event, tcp_mark_head_lost()
      may attempt to split the skb assuming it has more than 2*MSS bytes.
      
      This sounds very counterintuitive, but as the commit description for
      the related commit c0638c24 ("tcp: don't fragment SACKed skbs in
      tcp_mark_head_lost()") notes, this is because tcp_shifted_skb()
      coalesces adjacent regions of SACKed skbs, and when doing this it
      preserves the sum of their packet counts in order to reflect the
      real-world dynamics on the wire. The c0638c24 commit tried to
      avoid problems by not fragmenting SACKed skbs, since SACKed skbs are
      where the non-proportionality between pcount and skb->len/mss is known
      to be possible. However, that commit did not handle the case where
      during a reneging event one of these weird SACKed skbs becomes an
      un-SACKed skb, which tcp_mark_head_lost() can then try to fragment.
      
      The fix is to simply mark the entire skb lost when this happens.
      This makes the recovery slightly more aggressive in such corner
      cases before we detect reordering. But once we detect reordering
      this code path is by-passed because FACK is disabled.
      Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
      Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d88270ee
    • Joe Stringer's avatar
      inet: frag: Always orphan skbs inside ip_defrag() · 8282f274
      Joe Stringer authored
      Later parts of the stack (including fragmentation) expect that there is
      never a socket attached to frag in a frag_list, however this invariant
      was not enforced on all defrag paths. This could lead to the
      BUG_ON(skb->sk) during ip_do_fragment(), as per the call stack at the
      end of this commit message.
      
      While the call could be added to openvswitch to fix this particular
      error, the head and tail of the frags list are already orphaned
      indirectly inside ip_defrag(), so it seems like the remaining fragments
      should all be orphaned in all circumstances.
      
      kernel BUG at net/ipv4/ip_output.c:586!
      [...]
      Call Trace:
       <IRQ>
       [<ffffffffa0205270>] ? do_output.isra.29+0x1b0/0x1b0 [openvswitch]
       [<ffffffffa02167a7>] ovs_fragment+0xcc/0x214 [openvswitch]
       [<ffffffff81667830>] ? dst_discard_out+0x20/0x20
       [<ffffffff81667810>] ? dst_ifdown+0x80/0x80
       [<ffffffffa0212072>] ? find_bucket.isra.2+0x62/0x70 [openvswitch]
       [<ffffffff810e0ba5>] ? mod_timer_pending+0x65/0x210
       [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
       [<ffffffffa03205a2>] ? nf_conntrack_in+0x252/0x500 [nf_conntrack]
       [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
       [<ffffffffa02051a3>] do_output.isra.29+0xe3/0x1b0 [openvswitch]
       [<ffffffffa0206411>] do_execute_actions+0xe11/0x11f0 [openvswitch]
       [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
       [<ffffffffa0206822>] ovs_execute_actions+0x32/0xd0 [openvswitch]
       [<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch]
       [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
       [<ffffffffa02068a2>] ovs_execute_actions+0xb2/0xd0 [openvswitch]
       [<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch]
       [<ffffffffa0215019>] ? ovs_ct_get_labels+0x49/0x80 [openvswitch]
       [<ffffffffa0213a1d>] ovs_vport_receive+0x5d/0xa0 [openvswitch]
       [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
       [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
       [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
       [<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch]
       [<ffffffffa02148fc>] internal_dev_xmit+0x6c/0x140 [openvswitch]
       [<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch]
       [<ffffffff81660299>] dev_hard_start_xmit+0x2b9/0x5e0
       [<ffffffff8165fc21>] ? netif_skb_features+0xd1/0x1f0
       [<ffffffff81660f20>] __dev_queue_xmit+0x800/0x930
       [<ffffffff81660770>] ? __dev_queue_xmit+0x50/0x930
       [<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90
       [<ffffffff81669876>] ? neigh_resolve_output+0x106/0x220
       [<ffffffff81661060>] dev_queue_xmit+0x10/0x20
       [<ffffffff816698e8>] neigh_resolve_output+0x178/0x220
       [<ffffffff816a8e6f>] ? ip_finish_output2+0x1ff/0x590
       [<ffffffff816a8e6f>] ip_finish_output2+0x1ff/0x590
       [<ffffffff816a8cee>] ? ip_finish_output2+0x7e/0x590
       [<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0
       [<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0
       [<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80
       [<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340
       [<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190
       [<ffffffff816ab4c0>] ip_output+0x70/0x110
       [<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80
       [<ffffffff816aa9f9>] ip_local_out+0x39/0x70
       [<ffffffff816abf89>] ip_send_skb+0x19/0x40
       [<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40
       [<ffffffff816df21a>] icmp_push_reply+0xea/0x120
       [<ffffffff816df93d>] icmp_reply.constprop.23+0x1ed/0x230
       [<ffffffff816df9ce>] icmp_echo.part.21+0x4e/0x50
       [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
       [<ffffffff810d5f9e>] ? rcu_read_lock_held+0x5e/0x70
       [<ffffffff816dfa06>] icmp_echo+0x36/0x70
       [<ffffffff816e0d11>] icmp_rcv+0x271/0x450
       [<ffffffff816a4ca7>] ip_local_deliver_finish+0x127/0x3a0
       [<ffffffff816a4bc1>] ? ip_local_deliver_finish+0x41/0x3a0
       [<ffffffff816a5160>] ip_local_deliver+0x60/0xd0
       [<ffffffff816a4b80>] ? ip_rcv_finish+0x560/0x560
       [<ffffffff816a46fd>] ip_rcv_finish+0xdd/0x560
       [<ffffffff816a5453>] ip_rcv+0x283/0x3e0
       [<ffffffff810b6302>] ? match_held_lock+0x192/0x200
       [<ffffffff816a4620>] ? inet_del_offload+0x40/0x40
       [<ffffffff8165d062>] __netif_receive_skb_core+0x392/0xae0
       [<ffffffff8165e68e>] ? process_backlog+0x8e/0x230
       [<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90
       [<ffffffff8165d7c8>] __netif_receive_skb+0x18/0x60
       [<ffffffff8165e678>] process_backlog+0x78/0x230
       [<ffffffff8165e6dd>] ? process_backlog+0xdd/0x230
       [<ffffffff8165e355>] net_rx_action+0x155/0x400
       [<ffffffff8106b48c>] __do_softirq+0xcc/0x420
       [<ffffffff816a8e87>] ? ip_finish_output2+0x217/0x590
       [<ffffffff8178e78c>] do_softirq_own_stack+0x1c/0x30
       <EOI>
       [<ffffffff8106b88e>] do_softirq+0x4e/0x60
       [<ffffffff8106b948>] __local_bh_enable_ip+0xa8/0xb0
       [<ffffffff816a8eb0>] ip_finish_output2+0x240/0x590
       [<ffffffff816a9a31>] ? ip_do_fragment+0x831/0x8a0
       [<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0
       [<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0
       [<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80
       [<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340
       [<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190
       [<ffffffff816ab4c0>] ip_output+0x70/0x110
       [<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80
       [<ffffffff816aa9f9>] ip_local_out+0x39/0x70
       [<ffffffff816abf89>] ip_send_skb+0x19/0x40
       [<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40
       [<ffffffff816d55d3>] raw_sendmsg+0x7d3/0xc30
       [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90
       [<ffffffff816e7557>] ? inet_sendmsg+0xc7/0x1d0
       [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70
       [<ffffffff816e759a>] inet_sendmsg+0x10a/0x1d0
       [<ffffffff816e7495>] ? inet_sendmsg+0x5/0x1d0
       [<ffffffff8163e398>] sock_sendmsg+0x38/0x50
       [<ffffffff8163ec5f>] ___sys_sendmsg+0x25f/0x270
       [<ffffffff811aadad>] ? handle_mm_fault+0x8dd/0x1320
       [<ffffffff8178c147>] ? _raw_spin_unlock+0x27/0x40
       [<ffffffff810529b2>] ? __do_page_fault+0x1e2/0x460
       [<ffffffff81204886>] ? __fget_light+0x66/0x90
       [<ffffffff8163f8e2>] __sys_sendmsg+0x42/0x80
       [<ffffffff8163f932>] SyS_sendmsg+0x12/0x20
       [<ffffffff8178cb17>] entry_SYSCALL_64_fastpath+0x12/0x6f
      Code: 00 00 44 89 e0 e9 7c fb ff ff 4c 89 ff e8 e7 e7 ff ff 41 8b 9d 80 00 00 00 2b 5d d4 89 d8 c1 f8 03 0f b7 c0 e9 33 ff ff f
       66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48
      RIP  [<ffffffff816a9a92>] ip_do_fragment+0x892/0x8a0
       RSP <ffff88006d603170>
      
      Fixes: 7f8a436e ("openvswitch: Add conntrack action")
      Signed-off-by: default avatarJoe Stringer <joe@ovn.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8282f274
  3. 28 Jan, 2016 3 commits