- 27 Mar, 2020 26 commits
-
-
Johannes Berg authored
Some of the places using this want the newline, but not all, so remove the newline from it and generate it in the debugfs files where it's desired. The effect of this is not printing double newlines in debug log messages. Change-Id: Ia59b0abbef16b6783fcabc095c5fde16bd047a26 Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Johannes Berg authored
There's no need for this to be exposed outside of the tx.c file, make it static. Change-Id: I41d40008311b108d0578bd2ec73c5477e700a839 Signed-off-by:
-
Luca Coelho authored
Start supporting API version 53 for 22000 series. Change-Id: I5725e46394f3f53c3069723fd513cc53c7df383d Signed-off-by: -
Johannes Berg authored
This is used to initialize the default value, but refers back to the value itself, essentially leading to a val = val assignment at init time ... that's useless, remove it and use _NODEF. Change-Id: I725923016563c34ce2fa057bf7c12984e1041c49 Signed-off-by:
-
Luca Coelho authored
Now that YoYo is more mature, we can enable it by default, so we collect data in the new way. Change-Id: Ic1a147f935286b085ca8bdb248a7493b7c6341ea Signed-off-by: -
Tova Mussai authored
The FW changed the maximum number of scan offload profiles to 8 in new APIs. Support it by changing the scan_offload_profile_cfg struct to be more dynamic, so we can reuse most of the code and only change size of the profiles array. Change-Id: I65210cf541af46e2675a8c764d5871f7f5b070d6 Signed-off-by:
Tova Mussai <tova.mussai@intel.com> Signed-off-by:
-
rotem saado authored
When we have an assert during D3 we want to dump the internal buffer memory even if are we working in DRAM debug mode. We should not block dumping it. Change-Id: I69aad2d4904c4f8bb653c61e8781a2e07780054f Signed-off-by:
Rotem Saado <rotem.saado@intel.com> Signed-off-by:
-
Luca Coelho authored
We don't support the FPGA versions of this card combination anymore. Remove the cfg mangling that tries to load it and all the relevant structures. Change-Id: I190652101afcab682cfba873d062992f11efca32 Signed-off-by: -
Luca Coelho authored
We don't support QnJ HR STEP A anymore. Remove the structures we used for it. Change-Id: I0dfd88232bdc8ff2dd9c4368b8ed9a0c40c86bc8 Signed-off-by: -
Luca Coelho authored
A couple of SoCs, which can be recognized by PCI device IDs 0xA0F0 and 0x43F0, need a longer wait for the xtal to stabilize. To handle this, add a new trans_cfg structure for Qu devices with a larger xtal_latency value and apply them to the devices recognized by these IDs. Also add a flag that allows us to inform the FW that the low latency xtal should be used. Change-Id: I8a14c6af45ea14d8e7f1ef38a589158f38d0c0ea Signed-off-by: -
Luca Coelho authored
This new command is mostly backwards compatible, with the exception that the device_type element was changed into a bitmask. The device type bit remains the same (because we only had 0 and 1 anyway), but when using v1 we can't set any other bits, because that would change the integer. Other than that, the struct remains the same and the driver can set the device_type bit in both cases, but it can only set the low_latency bit if VER_2 is used. Change-Id: Ib68d4c821ebcce253b42ed0ea15881fb4e3e01da Signed-off-by: -
Avraham Stern authored
Add support for requesting trigger-based / non trigger-based measurements. Change-Id: Ib4d0c471da9c50d9981541a7f5926db384a0f7ce Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Luca Coelho authored
Now that we identify the correct cfgs with the new tables for Qu step C and QuZ with Jf, we can remove the mangling we do later on. Change-Id: Ic01ce67db147e897ad2424f0e05a70a00d2c620e Signed-off-by: -
Luca Coelho authored
All the QnJ devices have a similar matching to the other Qu devices, but needs a different configuration. Convert the QnJ devices to the new table accordingly. Change-Id: If236ef3d0da3e605a3379922818f5897e0affd7e Signed-off-by: -
Luca Coelho authored
Add new generic iwl_trans structures for these devices and apply the correct cfg depending on the device characteristics. Since we have to match Qu with IWL_CONFIG_ANY, we also need to move the Hr devices to the new table, but for now we keep matching on PCI device and subsystem device IDs. Change-Id: I14e9146a99621ff11ce50bc746a4b88af508fee0 Signed-off-by: -
Luca Coelho authored
We need to use different firmware versions for different HW steps with certain devices. Prepare for this differentiation by adding HW step to the new device table. Change-Id: Ib1afb7b0c89e9dc2d26e6d32ea19e978c17ba1dd Signed-off-by: -
Luca Coelho authored
After the refactoring, a few extern declarations were accidentally left in the iwl-config.h file. Remove them Change-Id: I79745e440ed5a0a90db61b0daaae374ecef09e86 Signed-off-by: -
Luca Coelho authored
These values are selected based on the PCI device ID, so the decision to use them can be made early. By moving them to the trans_cfg, we avoid duplicating the large cfg structs for small pieces of data (sometimes a single boolean). This will also allow us to make more decisions based on, for instance, the SoC type in used. The trans_cfg concept changes a bit, because previously it was used only to boot the device before reading further characteristics and now it also contains more data that is associated with the device ID. Change-Id: Ib71b07ea9e322eb74571dc5e8aa58f17eece5c9c Signed-off-by: -
Johannes Berg authored
We shouldn't do this just for HT/VHT, but be future-proof and also check for HE. Change-Id: Icaeff714c00a773681dbfee72558afd1c7121c5d Signed-off-by:
-
Luca Coelho authored
The iwl9560_2ac_cfg struct is used for PNJ devices and the configuration is the same as iwl9260_2ac_cfg, so we can remove the former to avoid redundancy. Change-Id: I17ac1802f00bd80006930b922a9fc21df60e3c16 Signed-off-by: -
Johannes Berg authored
That closing brace for the switch statement is misplaced, fix it. Change-Id: I39af135a9e3fc64337d2cced43a70cb48fe3b9c1 Signed-off-by:
-
Shahar S Matityahu authored
Modify adaptive dwell number of APs override API Instead of using channel to index mapping, add the adaptive dwell override parameters as part of the configuration per channel in the scan request command. Support 2 different override values and use them as follows: 1. 10 APs for friendly GO channels in p2p scan. 2. 2 APs for social channels in p2p scan. Change-Id: I3b461108abf2306c3d054099112f2c3afce1cc92 Signed-off-by:
Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by:
-
Johannes Berg authored
We'll need this data in the future, pass the values. Change-Id: Iaeff50716e783f5c0bcea86ca1c93ada1560525e Signed-off-by:
-
Luca Coelho authored
Add the read_config32 op to allow dumping the config space when needed. Change-Id: Ib2d254a38a4bfb95dcc3d04eec91781827a0c623 Signed-off-by: -
Luca Coelho authored
Add a new region type that allows us to dump the PCI config space. This is mostly the same as dumping a memory region, but reading from the device's config space instead. In order to make this generic and independent of the trans type, we make a function called iwl_dump_ini_config_iter() that calls a new op in the transport to read its config space. Change-Id: I15151bddf589f13b0e0a45c28b96bbcd73bcfdeb Signed-off-by: -
Shahar S Matityahu authored
Some devices require longer time to stabilize the power and XTAL. This is especially true for devices integrated in the SoC. Add support for a new firmware API that allows the driver to set the latency value accordingly. Change-Id: I6829a46b89e4e701f80a0e4033f4dd41ee44ed12 Signed-off-by:
-
- 26 Mar, 2020 12 commits
-
-
YueHaibing authored
commit 97a32539 ("proc: convert everything to "struct proc_ops"") forget do this convering for prism2_download_aux_dump_proc_fops. Fixes: 97a32539 ("proc: convert everything to "struct proc_ops"") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200326032432.20384-1-yuehaibing@huawei.com
-
Tzu-En Huang authored
In previous setting, management packets' sequence numbers will not increase and always stay at 0. Add hw sequence number support for mgmt packets. The table below shows different sequence number setting in the tx descriptor. seq num ctrl | EN_HWSEQ | DISQSELSEL | HW_SSN_SEL ------------------------------------------------------ sw ctrl | 0 | N/A | N/A hw ctrl per MACID | 1 | 0 | N/A hw ctrl per HWREG | 1 | 1 |HWREG(0/1/2/3) Signed-off-by:
Tzu-En Huang <tehuang@realtek.com> Signed-off-by:
Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.7. Major changes: ath11k * handle RX fragments * enable PN offload * add support for HE BSS color
-
Wright Feng authored
We add enable dynamic suspend (autosuspend) support in host driver, and it can let platform cut down idle power consumption. To support autosuspend feature in host driver, kernel need to be built with CONFIG_USB_SUSPEND and autosuspend need to be turn on. And we also replace wowl feature with adding "needs_remote_wakeup", so that host still can be waken by wireless device. Signed-off-by:
Wright Feng <wright.feng@cypress.com> Signed-off-by:
Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by:
-
Madhan Mohan R authored
Will enable FMAC to push more packets to bus tx queue and help improve throughput when fws queuing is enabled. This change is required to tune the throughput for passing WMM CERT tests. Signed-off-by:
Madhan Mohan R <madhanmohan.r@cypress.com> Signed-off-by:
-
Raveendran Somu authored
The function brcmf_inform_single_bss returns the value as success, even when the length exceeds the maximum value. The fix is to send appropriate code on this error. This issue is observed when Cypress test group reported random fmac crashes when running their tests and the path was identified from the crash logs. With this fix the random failure issue in Cypress test group was resolved. Reviewed-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Raveendran Somu <raveendran.somu@cypress.com> Signed-off-by:
-
Raveendran Somu authored
When the brcmf_fws_process_skb() fails to get hanger slot for queuing the skb, it tries to free the skb. But the caller brcmf_netdev_start_xmit() of that funciton frees the packet on error return value. This causes the double freeing and which caused the kernel crash. Signed-off-by:
-
Raveendran Somu authored
When the control transfer gets timed out, the error status was returned without killing that urb, this leads to using the same urb. This issue causes the kernel crash as the same urb is sumbitted multiple times. The fix is to kill the urb for timeout transfer before returning error Signed-off-by:
-
Chris Chiu authored
The nl80211 commands such as 'iw link' can't get current txrate information from the driver. This commit fills in the tx rate information from the C2H RA report in the sta_statistics function. Signed-off-by:
Chris Chiu <chiu@endlessm.com> Signed-off-by:
-
Chris Chiu authored
There's a data field in H2C and C2H commands which is used to carry channel bandwidth information. Add enumeration to make it more descriptive in code. Signed-off-by:
-
Yan-Hsuan Chuang authored
Sometimes we need to stop the coex mechanism to debug, so that we can manually control the device through various outer commands. Hence, add a new debugfs coex_enable to allow us to enable/disable the coex mechanism when driver is running. To disable coex echo 0 > /sys/kernel/debug/ieee80211/phyX/rtw88/coex_enable To enable coex echo 1 > /sys/kernel/debug/ieee80211/phyX/rtw88/coex_enable To check coex dm is enabled or not cat /sys/kernel/debug/ieee80211/phyX/rtw88/coex_enable Signed-off-by:
-
Yan-Hsuan Chuang authored
Add a new entry "coex_info" in debugfs to dump coex's states for us to debug on coex's issues. The basic concept for co-existence (coex, usually for WiFi + BT) is to decide a strategy based on the current status of WiFi and BT. So, it means the WiFi driver requires to gather information from BT side and choose a strategy (TDMA/table/HW settings). Althrough we can easily check the current status of WiFi, e.g., from kernel log or just dump the hardware registers, it is still very difficult for us to gather so many different types of WiFi states (such as RFE config, antenna, channel/band, TRX, Power save). Also we will need BT's information that is stored in "struct rtw_coex". So it is necessary for us to have a debugfs that can dump all of the WiFi/BT information required. Note that to debug on coex related issues, we usually need a longer period of time of coex_info dump every 2 seconds (for example, 30 secs, so we should have 15 times of coex_info's dump). Signed-off-by:
-
- 24 Mar, 2020 2 commits
-
-
Jakub Kicinski authored
We are having multiple review cycles with all vendors trying to implement devlink-info. Let's expand the documentation with more information about what's implemented and motivation behind this interface in an attempt to make the implementations easier. Describe what each info section is supposed to contain, and make some references to other HW interfaces (PCI caps). Document how firmware management is expected to look, to make it clear how devlink-info and devlink-flash work in concert. Name some future work. v2: - improve wording v3: - improve wording Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
It looks like the VSC8584 PHY driver is rolling its own RGMII delay configuration code, despite the fact that the logic is mostly the same. In fact only the register layout and position for the RGMII controls has changed. So we need to adapt and parameterize the PHY-dependent bit fields when calling the new generic function. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
