Add a new superblock section that contains a list of
  { minor version, recovery passes, errors_to_fix }

that is - a list of recovery passes that must be run when downgrading
past a given version, and a list of errors to silently fix.

The upcoming disk accounting rewrite is not going to be fully
compatible: we're going to have to regenerate accounting both when
upgrading to the new version, and also from downgrading from the new
version, since the new method of doing disk space accounting is a
completely different architecture based on deltas, and synchronizing
them for every jounal entry write to maintain compatibility is going to
be too expensive and impractical.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add two new superblock fields. Since the main section of the superblock
is now fully, we have to add a new variable length section for them -
bch_sb_field_ext.

 - recovery_passes_requried: recovery passes that must be run on the
   next mount
 - errors_silent: errors that will be silently fixed

These are to improve upgrading and dwongrading: these fields won't be
cleared until after recovery successfully completes, so there won't be
any issues with crashing partway through an upgrade or a downgrade.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The next patch will start to refer to recovery passes from the
superblock; naturally, we now need identifiers that don't change, since
the existing enum is in the order in which they are run and is not
fixed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

similar to prt_bitflags(), but for ulong arrays
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

we need BCH_SB_ERR_MAX in bcachefs.h
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

BCH_REPLICAS_MAX isn't the actual maximum number of pointers in an
extent, it's the maximum number of dirty pointers.

We don't have a real restriction on the number of cached pointers, and
we don't want a fixed size array here anyways - so switch to
DARRAY_PREALLOCATED().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-and-tested-by: Daniel J Blueman <daniel@quora.org>

Add support to darray for preallocating some number of elements.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We sometimes use darrays for quite large buffers - the btree write
buffer in particular needs large buffers, since it must be sized to hold
all the write buffer keys outstanding in the journal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Move the slowpath (actually growing the darray) to an out-of-line
function; also, add some helpers for the upcoming btree write buffer
rewrite.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

If a superblock write hasn't happened (i.e. we never had to go rw), then
c->sb.version will be out of date w.r.t. c->disk_sb.sb->version.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

turns out iterate_iovec() mutates __iov, we need to save our own copy
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-by: Marcin Mirosław <marcin@mejor.pl>

peek_upto() checks against the end position and bails out before
FILTER_SNAPSHOTS checks; this is because if we end up at a different
inode number than the original search key none of the keys we see might
be visibile in the current snapshot - we might be looking at inode in a
completely different subvolume.

But this is broken, because when we're iterating over extents we're
checking against the extent start position to decide when to bail out,
and the extent start position isn't monotonically increasing until after
we've run FILTER_SNAPSHOTS.

Fix this by adding a simple inode number check where the old bailout
check was, and moving the main check to the correct position.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-by: "Carl E. Thompson" <list-bcachefs@carlthompson.net>

Pull tracing fixes from Steven Rostedt:

 - Fix readers that are blocked on the ring buffer when buffer_percent
   is 100%. They are supposed to wake up when the buffer is full, but
   because the sub-buffer that the writer is on is never considered
   "dirty" in the calculation, dirty pages will never equal nr_pages.
   Add +1 to the dirty count in order to count for the sub-buffer that
   the writer is on.

 - When a reader is blocked on the "snapshot_raw" file, it is to be
   woken up when a snapshot is done and be able to read the snapshot
   buffer. But because the snapshot swaps the buffers (the main one with
   the snapshot one), and the snapshot reader is waiting on the old
   snapshot buffer, it was not woken up (because it is now on the main
   buffer after the swap). Worse yet, when it reads the buffer after a
   snapshot, it's not reading the snapshot buffer, it's reading the live
   active main buffer.

   Fix this by forcing a wakeup of all readers on the snapshot buffer
   when a new snapshot happens, and then update the buffer that the
   reader is reading to be back on the snapshot buffer.

 - Fix the modification of the direct_function hash. There was a race
   when new functions were added to the direct_function hash as when it
   moved function entries from the old hash to the new one, a direct
   function trace could be hit and not see its entry.

   This is fixed by allocating the new hash, copy all the old entries
   onto it as well as the new entries, and then use rcu_assign_pointer()
   to update the new direct_function hash with it.

   This also fixes a memory leak in that code.

 - Fix eventfs ownership

* tag 'trace-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ftrace: Fix modification of direct_function hash while in use
  tracing: Fix blocked reader of snapshot buffer
  ring-buffer: Fix wake ups when buffer_percent is set to 100
  eventfs: Fix file and directory uid and gid ownership

Directly return NULL or 'next' instead of breaking out of the loop.
Signed-off-by: David Laight <david.laight@aculab.com>
[ Split original patch into two independent parts  - Linus ]
Link: https://lore.kernel.org/lkml/7c8828aec72e42eeb841ca0ee3397e9a@AcuMS.aculab.com/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

osq_wait_next() is passed 'prev' from osq_lock() and NULL from
osq_unlock() but only needs the 'cpu' value to write to lock->tail.

Just pass prev->cpu or OSQ_UNLOCKED_VAL instead.

Should have no effect on the generated code since gcc manages to assume
that 'prev != NULL' due to an earlier dereference.
Signed-off-by: David Laight <david.laight@aculab.com>
[ Changed 'old' to 'old_cpu' by request from Waiman Long  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

struct optimistic_spin_node is private to the implementation.
Move it into the C file to ensure nothing is accessing it.
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Masami Hiramatsu reported a memory leak in register_ftrace_direct() where
if the number of new entries are added is large enough to cause two
allocations in the loop:

        for (i = 0; i < size; i++) {
                hlist_for_each_entry(entry, &hash->buckets[i], hlist) {
                        new = ftrace_add_rec_direct(entry->ip, addr, &free_hash);
                        if (!new)
                                goto out_remove;
                        entry->direct = addr;
                }
        }

Where ftrace_add_rec_direct() has:

        if (ftrace_hash_empty(direct_functions) ||
            direct_functions->count > 2 * (1 << direct_functions->size_bits)) {
                struct ftrace_hash *new_hash;
                int size = ftrace_hash_empty(direct_functions) ? 0 :
                        direct_functions->count + 1;

                if (size < 32)
                        size = 32;

                new_hash = dup_hash(direct_functions, size);
                if (!new_hash)
                        return NULL;

                *free_hash = direct_functions;
                direct_functions = new_hash;
        }

The "*free_hash = direct_functions;" can happen twice, losing the previous
allocation of direct_functions.

But this also exposed a more serious bug.

The modification of direct_functions above is not safe. As
direct_functions can be referenced at any time to find what direct caller
it should call, the time between:

                new_hash = dup_hash(direct_functions, size);
 and
                direct_functions = new_hash;

can have a race with another CPU (or even this one if it gets interrupted),
and the entries being moved to the new hash are not referenced.

That's because the "dup_hash()" is really misnamed and is really a
"move_hash()". It moves the entries from the old hash to the new one.

Now even if that was changed, this code is not proper as direct_functions
should not be updated until the end. That is the best way to handle
function reference changes, and is the way other parts of ftrace handles
this.

The following is done:

 1. Change add_hash_entry() to return the entry it created and inserted
    into the hash, and not just return success or not.

 2. Replace ftrace_add_rec_direct() with add_hash_entry(), and remove
    the former.

 3. Allocate a "new_hash" at the start that is made for holding both the
    new hash entries as well as the existing entries in direct_functions.

 4. Copy (not move) the direct_function entries over to the new_hash.

 5. Copy the entries of the added hash to the new_hash.

 6. If everything succeeds, then use rcu_pointer_assign() to update the
    direct_functions with the new_hash.

This simplifies the code and fixes both the memory leak as well as the
race condition mentioned above.

Link: https://lore.kernel.org/all/170368070504.42064.8960569647118388081.stgit@devnote2/
Link: https://lore.kernel.org/linux-trace-kernel/20231229115134.08dd5174@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 763e34e7 ("ftrace: Add register_ftrace_direct()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull gpio fixes from Bartosz Golaszewski:

 - Andy steps down as GPIO reviewer

 - Kent becomes a reviewer for GPIO uAPI

 - add missing intel file to the relevant MAINTAINERS section

* tag 'gpio-fixes-for-v6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  MAINTAINERS: Add a missing file to the INTEL GPIO section
  MAINTAINERS: Remove Andy from GPIO maintainers
  MAINTAINERS: split out the uAPI into a new section

Merge tag 'platform-drivers-x86-v6.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Ilpo Järvinen:

 - Intel PMC GBE LTR regression

 - P2SB / PCI deadlock fix

* tag 'platform-drivers-x86-v6.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/intel/pmc: Move GBE LTR ignore to suspend callback
  platform/x86/intel/pmc: Allow reenabling LTRs
  platform/x86/intel/pmc: Add suspend callback
  platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe

Pull block fixes from Jens Axboe:
 "Fix for a badly numbered flag, and a regression fix for the badblocks
  updates from this merge window"

* tag 'block-6.7-2023-12-29' of git://git.kernel.dk/linux:
  block: renumber QUEUE_FLAG_HW_WC
  badblocks: avoid checking invalid range in badblocks_check()

If an application blocks on the snapshot or snapshot_raw files, expecting
to be woken up when a snapshot occurs, it will not happen. Or it may
happen with an unexpected result.

That result is that the application will be reading the main buffer
instead of the snapshot buffer. That is because when the snapshot occurs,
the main and snapshot buffers are swapped. But the reader has a descriptor
still pointing to the buffer that it originally connected to.

This is fine for the main buffer readers, as they may be blocked waiting
for a watermark to be hit, and when a snapshot occurs, the data that the
main readers want is now on the snapshot buffer.

But for waiters of the snapshot buffer, they are waiting for an event to
occur that will trigger the snapshot and they can then consume it quickly
to save the snapshot before the next snapshot occurs. But to do this, they
need to read the new snapshot buffer, not the old one that is now
receiving new data.

Also, it does not make sense to have a watermark "buffer_percent" on the
snapshot buffer, as the snapshot buffer is static and does not receive new
data except all at once.

Link: https://lore.kernel.org/linux-trace-kernel/20231228095149.77f5b45d@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: debdd57f ("tracing: Make a snapshot feature available from userspace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The tracefs file "buffer_percent" is to allow user space to set a
water-mark on how much of the tracing ring buffer needs to be filled in
order to wake up a blocked reader.

 0 - is to wait until any data is in the buffer
 1 - is to wait for 1% of the sub buffers to be filled
 50 - would be half of the sub buffers are filled with data
 100 - is not to wake the waiter until the ring buffer is completely full

Unfortunately the test for being full was:

	dirty = ring_buffer_nr_dirty_pages(buffer, cpu);
	return (dirty * 100) > (full * nr_pages);

Where "full" is the value for "buffer_percent".

There is two issues with the above when full == 100.

1. dirty * 100 > 100 * nr_pages will never be true
   That is, the above is basically saying that if the user sets
   buffer_percent to 100, more pages need to be dirty than exist in the
   ring buffer!

2. The page that the writer is on is never considered dirty, as dirty
   pages are only those that are full. When the writer goes to a new
   sub-buffer, it clears the contents of that sub-buffer.

That is, even if the check was ">=" it would still not be equal as the
most pages that can be considered "dirty" is nr_pages - 1.

To fix this, add one to dirty and use ">=" in the compare.

Link: https://lore.kernel.org/linux-trace-kernel/20231226125902.4a057f1d@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 03329f99 ("tracing: Add tracefs file buffer_percentage")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Commit 80495120 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added at probe. This was needed in order to allow the
SoC to enter the deepest Package C state. To fix the regression and at
least support PC10 during suspend, move the LTR ignore from probe to the
suspend callback, and enable it again on resume. This solution will allow
PC10 during suspend but restrict Package C entry at runtime to no deeper
than PC8/9 while a network cable it attach to the PCH LAN.

Fixes: 80495120 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-6-david.e.box@linux.intel.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Commit 80495120 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added during probe. The fix will move the ignore to
occur at suspend-time (so as to not affect suspend power). This will
require the ability to enable the LTR again on resume. Modify
pmc_core_send_ltr_ignore() to allow enabling an LTR.

Fixes: 80495120 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-5-david.e.box@linux.intel.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Add a suspend callback to struct pmc for performing platform specific tasks
before device suspend. This is needed in order to perform GBE LTR ignore on
certain platforms at suspend-time instead of at probe-time and replace the
GBE LTR ignore removal that was done in order to fix a bug introduced by
commit 80495120 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()").

Fixes: 80495120 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-4-david.e.box@linux.intel.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

p2sb_bar() unhides P2SB device to get resources from the device. It
guards the operation by locking pci_rescan_remove_lock so that parallel
rescans do not find the P2SB device. However, this lock causes deadlock
when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
Hence the deadlock.

To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
refer the cache and return to the caller.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 9745fb07 ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support")
Cc: stable@vger.kernel.org
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/
Link: https://lore.kernel.org/r/20231229063912.2517922-2-shinichiro.kawasaki@wdc.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Pull ksmbd server fix from Steve French:

 - address possible slab out of bounds in parsing of open requests

* tag '6.7rc7-smb3-srv-fix' of git://git.samba.org/ksmbd:
  ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16()

Merge tag 'kbuild-fixes-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Revive proper alignment for the ksymtab and kcrctab sections

 - Fix gen_compile_commands.py tool to resolve symbolic links

 - Fix symbolic links to installed debug VDSO files

 - Update MAINTAINERS

* tag 'kbuild-fixes-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  linux/export: Ensure natural alignment of kcrctab array
  kbuild: fix build ID symlinks to installed debug VDSO files
  gen_compile_commands.py: fix path resolve with symlinks in it
  MAINTAINERS: Add scripts/clang-tools to Kbuild section
  linux/export: Fix alignment for 64-bit ksymtab entries

Pull bcachefs fixes from Kent Overstreet:
 "Just a few fixes: besides a few one liners, we have a fix for
  snapshots + compression where the extent update path didn't account
  for the fact that with snapshots, we might split an existing extent
  into three, not just two; and a small fixup for promotes which were
  broken by the recent changes in the data update path to correctly take
  into account device durability"

* tag 'bcachefs-2023-12-27' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Fix promotes
  bcachefs: Fix leakage of internal error code
  bcachefs: Fix insufficient disk reservation with compression + snapshots
  bcachefs: fix BCH_FSCK_ERR enum

The ___kcrctab section holds an array of 32-bit CRC values.
Add a .balign 4 to tell the linker the correct memory alignment.

Fixes: f3304ecd ("linux/export: use inline assembler to populate symbol CRCs")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

If ->NameOffset/Length is bigger than ->CreateContextsOffset/Length,
ksmbd_check_message doesn't validate request buffer it correctly.
So slab-out-of-bounds warning from calling smb_strndup_from_utf16()
in smb2_open() could happen. If ->NameLength is non-zero, Set the larger
of the two sums (Name and CreateContext size) as the offset and length of
the data area.
Reported-by: Yang Chaoming <lometsj@live.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues
  or are not considered backporting material"

* tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mailmap: add an old address for Naoya Horiguchi
  mm/memory-failure: cast index to loff_t before shifting it
  mm/memory-failure: check the mapcount of the precise page
  mm/memory-failure: pass the folio and the page to collect_procs()
  selftests: secretmem: floor the memory size to the multiple of page_size
  mm: migrate high-order folios in swap cache correctly
  maple_tree: do not preallocate nodes for slot stores
  mm/filemap: avoid buffered read/write race to read inconsistent data
  kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset
  kexec: select CRYPTO from KEXEC_FILE instead of depending on it
  kexec: fix KEXEC_FILE dependencies

When gpio-tangier was split the new born headers had been missed
in the MAINTAINERS. Add it there.

Fixes: d2c19e89 ("gpio: tangier: Introduce Intel Tangier GPIO driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Too many things are going on, and reviewing GPIO related code
seems not the best I can do, hence I step down as a reviewer of
the GPIO subsystem.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Kent Gibson is the author of the character device uAPI v2 and should be
Cc'ed on all patches aimed for it. Unfortunately this is not the case as
he's not listed in MAINTAINERS. Split the uAPI files into their own
section and make Kent the reviewer.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

The recent work to fix data moves w.r.t. durability broke promotes,
because the caused us to bail out when the extent minus pointers being
dropped still has enough pointers to satisfy the current number of
replicas.

Disable this check when we're adding cached replicas.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The dns_resolver_preparse() function has a check on the size of the
payload for the basic header of the binary-style payload, but is missing
a check for the size of the V1 server-list payload header after
determining that's what we've been given.

Fix this by getting rid of the the pointer to the basic header and just
assuming that we have a V1 server-list payload and moving the V1 server
list pointer inside the if-statement.  Dealing with other types and
versions can be left for when such have been defined.

This can be tested by doing the following with KASAN enabled:

    echo -n -e '\x0\x0\x1\x2' | keyctl padd dns_resolver foo @p

and produces an oops like the following:

    BUG: KASAN: slab-out-of-bounds in dns_resolver_preparse+0xc9f/0xd60 net/dns_resolver/dns_key.c:127
    Read of size 1 at addr ffff888028894084 by task syz-executor265/5069
    ...
    Call Trace:
      dns_resolver_preparse+0xc9f/0xd60 net/dns_resolver/dns_key.c:127
      __key_create_or_update+0x453/0xdf0 security/keys/key.c:842
      key_create_or_update+0x42/0x50 security/keys/key.c:1007
      __do_sys_add_key+0x29c/0x450 security/keys/keyctl.c:134
      do_syscall_x64 arch/x86/entry/common.c:52 [inline]
      do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
      entry_SYSCALL_64_after_hwframe+0x62/0x6a

This patch was originally by Edward Adam Davis, but was modified by
Linus.

Fixes: b946001d3bb1 ("keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry")
Reported-and-tested-by: syzbot+94bbb75204a05da3d89f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/0000000000009b39bc060c73e209@google.com/Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Cc: Edward Adam Davis <eadavis@qq.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jeffrey E Altman <jaltman@auristor.com>
Cc: Wang Lei <wang840925@gmail.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Steve French <sfrench@us.ibm.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For the QUEUE_FLAG_HW_WC to actually work, it needs to have a separate
number from QUEUE_FLAG_FUA, doh.

Fixes: 43c9835b ("block: don't allow enabling a cache on devices that don't support it")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231226081524.180289-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull virtio fixes from Michael Tsirkin:
 "A couple of bugfixes: one for a regression"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_blk: fix snprintf truncation compiler warning
  virtio_ring: fix syncs DMA memory with different direction

If prev_badblocks() returns '-1', it means no valid badblocks record
before the checking range. It doesn't make sense to check whether
the input checking range is overlapped with the non-existed invalid
front range.

This patch checkes whether 'prev >= 0' is true before calling
overlap_front(), to void such invalid operations.

Fixes: 3ea3354c ("badblocks: improve badblocks_check() for multiple ranges handling")
Reported-and-tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/nvdimm/3035e75a-9be0-4bc3-8d4a-6e52c207f277@leemhuis.info/
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Geliang Tang <geliang.tang@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: NeilBrown <neilb@suse.de>
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Cc: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/r/20231224002820.20234-1-colyli@suse.deSigned-off-by: Jens Axboe <axboe@kernel.dk>