- 17 Jan, 2023 40 commits
-
-
Martin Kaiser authored
Remove unused defines for Queue Select Value in TxDesc. Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Acked-by:
Pavel Skripkin <paskripkin@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20230109212852.75612-10-martin@kaiser.cxSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Kaiser authored
txirp_cnt in struct xmit_priv is initialised but never read. Remove it. Signed-off-by:
-
Martin Kaiser authored
hal_xmit_handler is not used by the r8188eu driver. Remove it. Signed-off-by:
-
Martin Kaiser authored
dir_dev in struct adapter is not used by the r8188eu driver. It can be removed. Signed-off-by:
-
Martin Kaiser authored
The switch statement in usb_write_port_complete has only one single case. Replace it with an if statement. Signed-off-by:
-
Martin Kaiser authored
voq_cnt in struct xmit_priv is initialised, incremented and decremented but never read. Remove voq_cnt and resulting dead code. Signed-off-by:
-
Martin Kaiser authored
viq_cnt in struct xmit_priv is initialised, incremented and decremented but never read. Remove viq_cnt and resulting dead code. Signed-off-by:
-
Martin Kaiser authored
bkq_cnt in struct xmit_priv is initialised, incremented and decremented but never read. Remove bkq_cnt and resulting dead code. Signed-off-by:
-
Martin Kaiser authored
beq_cnt in struct xmit_priv is initialised, incremented and decremented but never read. Remove beq_cnt and resulting dead code. Signed-off-by:
-
Michael Straube authored
Convert the function rtw_writeN() away from returning _FAIL or _SUCCESS which uses inverted error logic. Use the common error logic instead. Return 0 for success and negative values for failure. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20230108123804.3754-1-straube.linux@gmail.comSigned-off-by:
-
Martin Kaiser authored
The _rtw_init_xmit_priv function calls rtw_alloc_hwxmits to allocate memory for pxmitpriv->hwxmits (this is an array of struct hw_xmit). This allocation uses kzalloc, the allocated memory is initialised with 0. After the allocation, _rtw_init_xmit_priv calls rtw_init_hwxmits to set an element of each hw_xmit to 0. This is not necessary, we can remove the rtw_init_hwxmits call and the now unused function rtw_init_hwxmits. Signed-off-by:
-
Martin Kaiser authored
Remove the unused function parameter phwxmit from function dequeue_one_xmitframe. Signed-off-by:
-
Martin Kaiser authored
There's no need to call rtw_free_xmitframe before we dequeue the first frame. pxmitframe is always NULL at this point, rtw_free_xmitframe will do nothing in this case. Signed-off-by:
-
Martin Kaiser authored
Remove tx_retevt from struct xmit_priv. This semaphore is initialised but not used. Signed-off-by:
-
Martin Kaiser authored
Remove terminate_xmitthread_sema from struct xmit_priv. This semaphore is initialised but not used. Signed-off-by:
-
Martin Kaiser authored
The bm_pending queue in struct xmit_priv is initialised but not used. It can be removed. Signed-off-by:
-
Martin Kaiser authored
The dma_transfer_addr component in struct xmit_buf is initialised but not used. Remove it. Signed-off-by:
-
Martin Kaiser authored
The bpending array in struct xmit_buf is unused. Remove it. (struct xmit_buf is not part of the interface between the kernel driver and the device's firmware. It's safe to remove components from this struct.) Signed-off-by:
-
Martin Kaiser authored
The qos_option variable in function rtw_make_wlanhdr should be a boolean as it's set to true or false. We can directly set it to pqospriv->qos_option instead of using a default value and if statements. Signed-off-by:
-
Martin Kaiser authored
Simplify the error handling in rtw_make_wlanhdr. Exit immediately instead of jumping to the end of the function. We don't have to do any clean-up. Signed-off-by:
-
Martin Kaiser authored
Reorder the code in rtw_make_wlanhdr to make the function simpler. There's a large if statement to check that we process only data frames. Revert the condition and exit for non-data frames. Signed-off-by:
-
Martin Kaiser authored
We do not need the psta check in the while loop of rtw_xmitframe_coalesce. psta is already checked near the start of the function and is not modified afterwards. Signed-off-by:
-
Martin Kaiser authored
rtl8188eu_init_xmit_priv's only jobs is to initialise the xmit tasklet. Remove rtl8188eu_init_xmit_priv and initialise the xmit tasklet in _rtw_init_xmit_priv. Yet again, this makes the code a tiny bit smaller. Signed-off-by:
-
Martin Kaiser authored
Simplify the rtl8188eu_xmit_tasklet function. Remove an unnecessary temporary variable and reformat the code. Signed-off-by:
-
Martin Kaiser authored
All callers of rtl8188eu_xmitframe_complete set the pxmitbuf parameter to NULL, in which case rtl8188eu_xmitframe_complete allocates another xmit_buf internally. Remove the pxmitbuf parameter and resulting dead code. Signed-off-by:
-
Martin Kaiser authored
In function xmitframe_swencrypt, we can return immediately if our packet needs no encryption. This is simpler than wrapping all the code into a large if statement. Signed-off-by:
-
Martin Kaiser authored
The cmd_seq component of struct cmd_priv is set and incremented but never read. It can be removed. Signed-off-by:
-
Martin Kaiser authored
Remove some CAM-related defines which are not used in the r8188eu driver. Signed-off-by:
-
Martin Kaiser authored
xmitframe_swencrypt always returns _SUCCESS and the caller does not check the return value. We can remove the return value and make xmitframe_swencrypt a void function. Signed-off-by:
-
Martin Kaiser authored
Remove the token variable in on_action_public and use frame_body[2] as function parameter. This saves another few lines of code. Signed-off-by:
-
Martin Kaiser authored
The pframe pointer in on_action_public is used only in the definition of frame_body, which points to the payload of an incoming action frame. We can use mgmt to locate the action payload and remove the pframe pointer. Signed-off-by:
-
Martin Kaiser authored
Merge on_action_public_default into on_action_public, which is the only caller. Yet again, this makes the code a tiny bit smaller. Signed-off-by:
-
Martin Kaiser authored
Apart from declaring variables, on_action_public_vendor is only an if statement. Merge this function into its only caller. This makes the code a tiny bit smaller. Signed-off-by:
-
Xu Panda authored
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL-terminated strings. Signed-off-by:
Xu Panda <xu.panda@zte.com.cn> Signed-off-by:
Yang Yang <yang.yang29@zte.com> Reviewed-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202212261905476729002@zte.com.cnSigned-off-by:
-
Kang Minchul authored
Fixed following checkpatch.pl warning: * WARNING: Prefer kcalloc over kzalloc with multiply Instead of specifying (number of bytes) * (size) as arugment in kzalloc, prefer kcalloc. Signed-off-by:
Kang Minchul <tegongkang@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Reviewed-by:
-
Philipp Hortmann authored
Rename variable SilentResetRxSlotIndex to silent_reset_rx_slot_index, IC_Cut to ic_cut and Rf_Mode to rf_mode to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/60c1fb2861143c8736f061cf85e737b78c210a09.1673812850.git.philipp.g.hortmann@gmail.comSigned-off-by:
-
Philipp Hortmann authored
Rename variable EEPROMTxPowerLevelCCK to eeprom_tx_pwr_level_cck, AutoloadFailFlag to autoload_fail_flag and SilentResetRxStuckEvent to silent_reset_rx_stuck_event to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Philipp Hortmann authored
Rename variable EEPROMThermalMeter to eeprom_thermal_meter, EEPROMAntPwDiff to eeprom_ant_pwr_diff and EEPROMTxPowerLevelOFDM24G to eeprom_tx_pwr_level_ofdm24g to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Philipp Hortmann authored
Rename variable CrystalCap to crystal_cap, EEPROMLegacyHTTxPowerDiff to eeprom_legacy_ht_tx_pwr_diff and EEPROMCrystalCap to eeprom_crystal_cap to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Philipp Hortmann authored
Rename variable SetBWModeInProgress to set_bw_mode_in_progress, SwChnlInProgress to sw_chnl_in_progress and ThermalMeter to thermal_meter to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
