- 04 Oct, 2010 6 commits
-
-
Ben Skeggs authored
Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
This will end up quite different, it makes sense for it to be completely separate. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
On certain boards, there's BIOS scripts and memory timings that need to be modified with the memclk. Just pass in the entire perflvl struct and let the chipset-specific code decide what to do. Signed-off-by: -
Ben Skeggs authored
Reported-by:
Adam Jackson <ajax@redhat.com> Signed-off-by:
-
Roy Spliet authored
This isn't correct everywhere yet, but since we don't use the data yet it's perfectly safe to push in, and the information we gain from logs will help to fix the remaining issues. v2 (Ben Skeggs <bskeggs@redhat.com>): - fixed up formatting - free parsed timing info on takedown - switched timing table printout to debug loglevel Signed-off-by:
Roy Spliet <r.spliet@student.tudelft.nl> Signed-off-by:
-
- 24 Sep, 2010 34 commits
-
-
Ben Skeggs authored
Just in case someone, somewhere, does something difficult. This also removes one path that was different between fermi and non-fermi. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Francisco Jerez authored
Signed-off-by:
Francisco Jerez <currojerez@riseup.net> Signed-off-by:
-
Francisco Jerez authored
Signed-off-by:
-
Francisco Jerez authored
Signed-off-by:
-
Francisco Jerez authored
Signed-off-by:
-
Francisco Jerez authored
Signed-off-by:
-
Francisco Jerez authored
Signed-off-by:
-
Francesco Marella authored
Signed-off-by:
Francesco Marella <fmarl@paranoici.org> Signed-off-by:
-
Francisco Jerez authored
Signed-off-by:
-
Francisco Jerez authored
Signed-off-by:
-
Ben Skeggs authored
nouveau_bios_fp_mode() zeroes the mode struct before filling in relevant entries. This nukes the mode id initialised by drm_mode_create(), and causes warnings from idr when we try to remove the mode. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Somehow fixes some corruption seen in KDE.. Signed-off-by: -
Ben Skeggs authored
Very useful for debugging buffer migration issues. Signed-off-by: -
Martin Peres authored
Signed-off-by:
Martin Peres <martin.peres@ensi-bourges.fr> Signed-off-by:
-
Ben Skeggs authored
Fixes DP output on a GTX 465 board I have. Signed-off-by: -
Francisco Jerez authored
Used on nv17-nv28, they contain memory clocks and timings, only one of the table entries can actually be used, depending on the RAMCFG straps, and it's usually higher than the frequency programmed on boot by the BIOS. The memory timings listed in table version 0x1x are used to init the 0x12xx range but they aren't required for reclocking to work. Signed-off-by:
-
Ben Skeggs authored
Should fix issues noticed on NVAC (MacBook Pro / ION) since gpuobj rework. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Found on NV3x boards, this should allow voltage modifications to work on these chipsets. Signed-off-by: -
Ben Skeggs authored
Reported-by:
-
Phil Turmel authored
Build breakage: drivers/built-in.o: In function `nouveau_acpi_edid': (.text+0x13404e): undefined reference to `acpi_video_get_edid' make: *** [.tmp_vmlinux1] Error 1 Introduced by: a6ed76d7 is the first bad commit commit a6ed76d7 Author: Ben Skeggs <bskeggs@redhat.com> Date: Mon Jul 12 15:33:07 2010 +1000 drm/nouveau: support fetching LVDS EDID from ACPI Based on a patch from Matthew Garrett. Signed-off-by:
Matthew Garrett <mjg@redhat.com> It doesn't seem to revert cleanly, but the problem lies in these two config entries: CONFIG_ACPI=y CONFIG_ACPI_VIDEO=m Adding a select for ACPI_VIDEO appears to be the best solution, and is comparable to what is done in DRM_I915. Builds, boots, and appears to work correctly. Signed-off-by:
Philip J. Turmel <philip@turmel.org> Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Guarded by a module parameter for the moment, read the code for the magic value which enables it. Signed-off-by: -
Ben Skeggs authored
Currently just hooked up to the already-existing nouveau_hw, which should handle all relevant chipsets as well as we currently can. This will likely be eventually split out and improved into chipset specific code at a later point. Signed-off-by: -
Ben Skeggs authored
This will make nouveau_pm attempt to report the card's current performance level both during bootup, and through sysfs. This is a very initial implementation, and can be improved a *lot* Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
This replaces all the pll_types definitions for ones that match the types used in the tables in recent VBIOS versions. get_pll_limits() will now accept either type or register value as input across all limits table versions, and will store the actual register ID that a PLL type refers to in the returned structure. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
The rest of the connector code assumes we can kfree() the EDID pointer. This causes things to blow up with the ACPI EDID pointer we get passed. Signed-off-by:
-
