* fixes leaks on failed init
	* switches to sane allocation
	* fixes netdev freeing (kfree -> free_netdev)
	* fixes the idiocy with ->init() (from registger_netdev()) calling
unregister_netdevice() in case of failure - before we got anywhere past
the very beginning of register_netdev().

That's a part of NE* series that failed through the cracks (there were
pending irda patches, so that had been postponed, irda patches either
hadn't materialized in two months or hadn't touched that driver at all,
the latter being more likely).

Please, apply.

--Boundary-00=_EQjNA7alc3Y2zQJ
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Hi,

> Please resend patches that may be applied with "patch -p1",
> not "patch -p0".

ok., here's the first, suspend/resume

--Boundary-00=_EQjNA7alc3Y2zQJ
Content-Type: text/x-diff;
  charset="iso-8859-1";
  name="xircom_tulip_cb_pm.diff"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename="xircom_tulip_cb_pm.diff"

From: Geert Uytterhoeven <geert@linux-m68k.org>

Hydra Ethernet: Convert to the new driver model

From: Geert Uytterhoeven <geert@linux-m68k.org>

Ariadne Ethernet: Convert to the new driver model

From: Geert Uytterhoeven <geert@linux-m68k.org>

A2065 Ethernet: Convert to the new driver model

From: Geert Uytterhoeven <geert@linux-m68k.org>

Atari Pamsnet Ethernet: Kill warning

From: Geert Uytterhoeven <geert@linux-m68k.org>

sun3lance updates from Sam Creasey:
  - Pass the correct flags to request_irq()
  - Add debug code for transmitting packets

Here is a rediff'd version of the patch to fix shared irq handling in pcnet_cs
and generic 8390 drivers.

Error path (EISA) probe was using device before set.

# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
#	           ChangeSet	1.1567  -> 1.1568
#	  drivers/net/dgrs.c	1.23    -> 1.24
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 04/02/19	shemminger@osdl.org	1.1568
# fix bug in eisa error path.
# --------------------------------------------
#

* define dump stats complete constant
* add mwb() to keep order straight with HW when appending
  new resources to Rx and Tx queues
* increment stats for rx_dropped and rx_over_errors

* driver not handling failures of register_netdev
  [Stephen Hemminger (shemminger@osdl.org)]

* For half duplex, the IEEE says collision retry count should
  be 15 not 16.  Would cause really slow transfers on some hubs
  (i.e NetGear DS108).

* msec_delay macro wouldn't delay at all if x < 10, and
  wouldn't delay enough for x = 10.  Not a concern for
  2.6 (HZ=1000) but is for 2.4 (HZ=100).

* Multiple reports of system lock-ups with the CSA patch, so
  let's disable fix for now until we can understand why this
  is causing the hangs.  It was first thought that only pre-
  productions systems would hang, but that's not true.

* Disable TSO as default setting until some hangs/resets caused
  with TSO enabled are root-caused.  TSO can still be manually
  enabled using ethtool -K.

* Bug fix: flow control high/low watermark settings not
  within Rx FIFO range: math error.

Small patch to clean up 3c359_micrcode.h, no other drivers in the kernel
come anywhere near the file and the #if is superflous.

Mike Phillips

per-network-interface message logging standards for net drivers.

Written by Donald Becker.

into ppc970.osdl.org:/home/torvalds/v2.5/linux

From: Anton Blanchard <anton@samba.org>

There were a number of bugs in our cmd_line handling:

- We were looking at cmd_line after it had been tokenised. Use saved_command
  line instead
- Use strlcpy instead of memcpy/explicit NULL set.
- Remove magic numbers in iseries cmd_line parsing

From: Anton Blanchard <anton@samba.org>

UP compile fixes.

From: Anton Blanchard <anton@samba.org>

Restore the old cpu names in /proc/cpuinfo, some applications parse this
field.

From: Anton Blanchard <anton@samba.org>

Some trivial oops cleanups.

From: Anton Blanchard <anton@samba.org>

Set node 0 online, otherwise the recent cpu/memory topology stuff will oops
on a non NUMA machine.

From: Linda Xie <lxiep@us.ibm.com>

set err to -ENODEV when a new node doesn't have "interrupt" property.

From: Anton Blanchard <anton@samba.org>

__get_SP used to be a function call which meant we allocated a stack
frame before calling it. This meant the SP it returned was one frame
below the current function. Lets call that bogusSP (and the real one
SP).

The new dump_stack was being tail call optimised so it remained one
frame above bogusSP. dump_stack would then store below SP (as the ABI
allows us to) and would stomp over the back link that bogusSP pointed
to (__get_SP had set the back link up so it worked sometimes, just not
all the time).

Fix this by just making __get_SP an inline that returns the current SP.

From: Stephen Rothwell <sfr@canb.auug.org.au>

I think Ben introduced this new file and iSeries doesn't need it.

From: Anton Blanchard <anton@samba.org>

Another decent optimisation found in the ia64 port, dont take the irq
descriptor lock or do the note_interrupt stuff on PER_CPU irqs (ie IPIs).

From: Anton Blanchard <anton@samba.org>

Clean up per cpu usage in segment table code.

From: Anton Blanchard <anton@samba.org>

Make a number of segment table functions static.
Clean up one duplicated slbia.

From: Anton Blanchard <anton@samba.org>

Add cpus and NUMA memory nodes to sysfs. Also add cpu physical id.

From: Anton Blanchard <anton@samba.org>

The might_sleep infrastructure doesnt like our get_users in the backtrace
code, we often end up with might_sleep warnings inside might_sleep warnings.

Instead just be careful about pointers before dereferencing them.

Also remove the hack where we only printed the bottom 32bits of the WCHAN
value.

From: Anton Blanchard <anton@samba.org>

This adds stack overflow debugging much like x86. Its pretty agressive
and checks if > 8kB out of 16kB of stack is used.