The Hardware Filter Block code will be used by ethtool functions
when defining flow types so this commit moves the functions in the
file to prevent the need for prototype declarations.

This is broken out to facilitate review.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit e2072600.

This commit restores the previous implementation of Hardware Filter
Block functions to the file for use in subsequent commits.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The GENET_POWER_WOL_MAGIC power up and power down code configures
the device for WoL when suspending and disables the WoL logic when
resuming. It makes sense that this code should also manage the WoL
clocking.

This commit consolidates the logic and moves it earlier in the
resume sequence.

Since the clock is now only enabled if WoL is successfully entered
the wol_active flag is introduced to track that state to keep the
clock enables and disables balanced in case a suspend is aborted.
The MPD_EN hardware bit can't be used because it can be cleared
when the MAC is reset by a deep sleep.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Broadcom STB chips support a deep sleep mode where all register contents
are lost. Because we were stashing the MagicPacket password into some of
these registers a suspend into that deep sleep then a resumption would
not lead to being able to wake-up from MagicPacket with password again.

Fix this by keeping a software copy of the password and program it
during suspend.

Fixes: c51de7f3 ("net: bcmgenet: add Wake-on-LAN support code")
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit explicitly calls the bcmgenet_set_rx_mode() function when
the network interface is started. This function is normally called by
ndo_set_rx_mode when the flags are changed, but apparently not when
the driver is suspended and resumed.

This change ensures that address filtering or promiscuous mode are
properly restored by the driver after the MAC may have been reset.

Fixes: b6e978e5 ("net: bcmgenet: add suspend/resume callbacks")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for nf-next:

1) Add IPS_HW_OFFLOAD status bit, from Bodong Wang.

2) Remove 128-bit limit on the set element data area, rise it
   to 64 bytes.

3) Report EOPNOTSUPP for unsupported NAT types and flags.

4) Set up nft_nat flags from the control plane path.

5) Add helper functions to set up the nf_nat_range2 structure.

6) Add netmap support for nft_nat.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Karsten Graul says:

====================
net/smc: preparations for SMC-R link failover

This patch series prepares the SMC code for the implementation of SMC-R link
failover capabilities which are still missing to reach full compliance with
RFC 7609.
The code changes are separated into 65 patches which together form the new
functionality. I tried to create meaningful patches which allow to follow the
implementation.

Question: how to handle the remaining 52 patches? All of them are needed for
link failover to work and should make it into the same merge window.
Can I send them all together?

The SMC-R implementation will transparently make use of the link failover
feature when matching RoCE devices are available, no special setup is required.
All RoCE devices with the same PNET ID as the TCP device (hardware-defined or
user-defined via the smc_pnet tool) are candidates to get used to form a link
in a link group. When at least 2 RoCE devices are available on both
communication endpoints then a symmetric link group is formed, meaning the link
group has 2 independent links. If one RoCE device goes down then all connections
on this link are moved to the surviving link. Upon recovery of the failing
device or availability of a new one, the symmetric link group will be restored.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce smc_llc_lgr_init() and smc_llc_lgr_clear() to implement all
llc layer specific initialization and cleanup in module smc_llc.c.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The locks for sndbufs and rmbs are never used from atomic context. Using
a mutex for these locks will allow to nest locks with other mutexes.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When llc responses are received then possible waiters for this response
are to be notified. This can be done in tasklet context, without to
use a work in the llc work queue. Move all code that handles llc
responses into smc_llc_rx_response().
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Incoming llc messages are processed in irq tasklet context, and
a worker is used to send outgoing messages. The worker is needed
because getting a send buffer could result in a wait for a free buffer.

To make sure all incoming llc messages are processed in a serialized way
introduce an event queue and create a new queue entry for each message
which is queued to this event queue. A new worker processes the event
queue entries in order.
And remove the use of a separate worker to send outgoing llc messages
because the messages are processed in worker context already.
With this event queue the serialized llc_wq work queue is obsolete,
remove it.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cancel the testlink worker during link clear processing and remove the
extra function smc_llc_link_inactive().
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The testlink work waits for a response to the testlink request and
blocks the single threaded llc_wq. This type of work does not have to be
serialized and can be moved to the system work queue.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before a link can be reused it must have been cleared. Lowest current
link state is INACTIVE, which does not mean that the link is already
cleared.
Add a new state UNUSED that is set when the link is cleared and can be
reused.
Add helper smc_llc_usable_link() to find an active link in a link group,
and smc_link_usable() to determine if a link is usable.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend smc_rmb_rtoken_handling() and smc_rtoken_delete() to support
multiple links.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As a preparation for the support of multiple links remove the usage of
a static link id (SMC_SINGLE_LINK) and allow dynamic link ids.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As a preparation for the support of multiple links remove the usage of
a static link id (SMC_SINGLE_LINK) and allow dynamic link ids.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The link_id is the index of the link in the array of the link group.
When a link in the array is reused for a new link, a different unique
link_id should be used, otherwise the index in the array could collide
with the previous link at this array position.
Use a new variable link_idx as array index, and make link_id an
increasing unique id value.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the initialization of a new link into its own function, separate
from smc_lgr_create, to allow more than one link per link group.
Do an extra check if the IB device initialization was successful, and
reset the link state if any error occurs during smcr_link_init().
And rename two existing functions to use the prefix smcr_ to indicate
that they belong to the SMC-R code path.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pnet table stored pnet ids in the smc device structures. When a
device is going down its smc device structure is freed, and when the
device is brought online again it no longer has a pnet id set.
Rework the pnet table implementation to store the device name with their
assigned pnet id and apply the pnet id to devices when they are
registered.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 790ab249.

This change needs more work.
Signed-off-by: David S. Miller <davem@davemloft.net>

There's no callers in-tree anymore since commit 84287bb3 ("ila: add
checksum neutral map auto").
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's no callers in-tree anymore.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix
the ndo function to use the correct type.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the helper function that wraps the calls to platform_get_resource()
and devm_ioremap_resource() together.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for reading the optical module eeprom
info via "ethtool -m".
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mauro Carvalho Chehab says:

====================
net: manually convert files to ReST format - part 1

There are very few documents upstream that aren't converted upstream.

This series convert part of the networking text files into ReST.
It is part of a bigger set of patches, which were split on parts,
in order to make reviewing task easier.

The full series (including those ones) are at:

	https://git.linuxtv.org/mchehab/experimental.git/log/?h=net-docs

And the documents, converted to HTML via the building system
are at:

	https://www.infradead.org/~mchehab/kernel_docs/networking/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- add a document title;
- mark lists as such;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Not much to be done here:

- add SPDX header;
- add a document title;
- mark a literal as such, in order to avoid a warning;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- mark lists as such;
- mark tables as such;
- use footnote markup;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Not much to be done here:

- add SPDX header;
- add a document title;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust title using the proper markup;
- mark code blocks and literals as such;
- mark tables as such;
- mark lists as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust title markup;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Not much to be done here:

- add SPDX header;
- use a document title from existing text;
- adjust a chapter markup;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust title markup;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Not much to be done here:

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- add notes markups;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- add SPDX header;
- mark code blocks and literals as such;
- mark tables as such;
- mark lists as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>