- 26 Jan, 2017 3 commits
-
-
Daniel Vetter authored
It's only for a device quirk, and we might as well do that in the load callback. Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-10-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Use the same trick we used for i915 when we still had ums support: Just initialize the agp support unconditionally in the driver load function. Unfortunately that means we need to export drm_agp_init again, but I think that's a lesser evil. Acked-by:
-
Daniel Vetter authored
There was a bit of mix-up between initialization and registering. v2: Review from Gustavo. Reviewed-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by:
-
- 25 Jan, 2017 7 commits
-
-
Daniel Vetter authored
After going through all the trouble of splitting out parts from drm_crtc.[hc] and then properly documenting each I've entirely forgotten to show the same TLC for CRTCs themselves! Let's make amends asap. v2: Review from Eric. Reviewed-by:
Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by:
-
Daniel Vetter authored
Returning 0 for an on-chip gpu doesn't change anything at all. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by:
-
Daniel Vetter authored
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Review from Eric. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Daniel Vetter authored
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Review from Gustavo. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Daniel Vetter authored
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Daniel Vetter authored
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Comments from Gustavo. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Rewiewed-by:
-
Dhinakaran Pandiyan authored
struct drm_dp_mst_topology_mgr currently stores a pointer to struct dev. Changing this to instead hold a pointer to drm_device is more useful as it gives access to DRM structures. This also makes it consistent with other DRM structures like drm_crtc, drm_connector etc. Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1485301777-3465-2-git-send-email-dhinakaran.pandiyan@intel.com
-
- 24 Jan, 2017 5 commits
-
-
Chris Wilson authored
For the convenience of encapsulation the reservation object's ww_mutex was wrapped in pair of lock/unlock helpers. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Noralf Trønnes authored
Add missing includes to pull in definitions for drm_crtc, drm_plane and drm_encoder. Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
Noralf Trønnes authored
Add a CMA version of drm_fb_helper_set_suspend_unlocked(). Cc: laurent.pinchart@ideasonboard.com Signed-off-by:
-
Chris Wilson authored
The prototypes were moved to a new header, but the function definitions were not updated to pull in the declarations. drivers/gpu/drm/drm_cache.c:79:1: warning: no previous prototype for ‘drm_clflush_pages’ [-Wmissing-prototypes] drivers/gpu/drm/drm_cache.c:120:1: warning: no previous prototype for ‘drm_clflush_sg’ [-Wmissing-prototypes] drivers/gpu/drm/drm_cache.c:152:1: warning: no previous prototype for ‘drm_clflush_virt_range’ [-Wmissing-prototypes] Fixes: f9a87bd7 ("drm: Move drm_clflush prototypes to drm_cache header file") Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by:
-
Arnd Bergmann authored
The of_node member in struct drm_bridge is hidden when CONFIG_OF is disabled, causing a build error: drivers/gpu/drm/bridge/dw-hdmi.c: In function '__dw_hdmi_probe': drivers/gpu/drm/bridge/dw-hdmi.c:2063:14: error: 'struct drm_bridge' has no member named 'of_node' We could fix this either using a Kconfig dependency on CONFIG_OF or making the one line conditional. The latter gives us better compile test coverage, so this is what I'm doing here. Fixes: 69497eb9 ("drm: bridge: dw-hdmi: Implement DRM bridge registration") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170123122312.3290934-1-arnd@arndb.de
-
- 23 Jan, 2017 5 commits
-
-
Tobias Jakobi authored
While the Kconfig entries of FIMD and DECON7 both select FB_MODE_HELPERS, the code doesn't use any of the functionality. Signed-off-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
-
Chris Wilson authored
After warning that the connector list is not empty on device unregistration (i.e. module unload) also print out which connectors are still hanging around to aide finding the leak. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
The allocation for the bitmap may become very large, larger than MAX_ORDER, for large requests. We fail gracefully by falling back to trail-division, so disable the warning from kmalloc: 521.961092] WARNING: CPU: 0 PID: 30637 at mm/page_alloc.c:3548 __alloc_pages_slowpath+0x237/0x9a0 [ 521.961105] Modules linked in: i915(+) drm_kms_helper intel_gtt prime_numbers [last unloaded: drm_kms_helper] [ 521.961126] CPU: 0 PID: 30637 Comm: drv_selftest Tainted: G U W 4.10.0-rc3+ #321 [ 521.961137] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [ 521.961148] Call Trace: [ 521.961161] dump_stack+0x4d/0x6f [ 521.961172] __warn+0xc1/0xe0 [ 521.961181] warn_slowpath_null+0x18/0x20 [ 521.961189] __alloc_pages_slowpath+0x237/0x9a0 [ 521.961200] ? sg_init_table+0x1a/0x40 [ 521.961208] ? get_page_from_freelist+0x3fa/0x910 [ 521.961275] ? i915_gem_object_get_sg+0x272/0x2b0 [i915] [ 521.961285] __alloc_pages_nodemask+0x1ea/0x220 [ 521.961295] kmalloc_order+0x1c/0x50 [ 521.961304] __kmalloc+0x115/0x170 [ 521.961314] expand_to_next_prime+0x43/0x180 [prime_numbers] [ 521.961324] next_prime_number+0x47/0xc0 [prime_numbers] [ 521.961377] igt_vma_rotate+0x386/0x590 [i915] [ 521.961429] i915_subtests+0x37/0xc0 [i915] [ 521.961481] i915_vma_mock_selftests+0x3d/0x70 [i915] [ 521.961532] run_selftests+0x16e/0x1f0 [i915] [ 521.961541] ? 0xffffffffa02a4000 [ 521.961592] i915_mock_selftests+0x29/0x40 [i915] [ 521.961638] i915_init+0xa/0x5e [i915] [ 521.961646] ? 0xffffffffa02a4000 [ 521.961655] do_one_initcall+0x3e/0x160 [ 521.961664] ? __vunmap+0x7c/0xc0 [ 521.961672] ? vfree+0x29/0x70 [ 521.961680] ? kmem_cache_alloc+0xcf/0x120 [ 521.961690] do_init_module+0x55/0x1c4 [ 521.961699] load_module+0x1f3f/0x25b0 [ 521.961707] ? __symbol_put+0x40/0x40 [ 521.961716] ? kernel_read_file+0x100/0x190 [ 521.961725] SYSC_finit_module+0xbc/0xf0 [ 521.961734] SyS_finit_module+0x9/0x10 [ 521.961744] entry_SYSCALL_64_fastpath+0x17/0x98 [ 521.961752] RIP: 0033:0x7f111aca4119 [ 521.961760] RSP: 002b:00007ffd8be6cbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 521.961773] RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f111aca4119 [ 521.961781] RDX: 0000000000000000 RSI: 000055dfc18bc8e0 RDI: 0000000000000006 [ 521.961789] RBP: 00007ffd8be6bbe0 R08: 0000000000000000 R09: 0000000000000000 [ 521.961796] R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000005 [ 521.961805] R13: 000055dfc18bd3a0 R14: 00007ffd8be6bbc0 R15: 0000000000000005 Signed-off-by:
-
Wei Yongjun authored
PTR_ERR should access the value just tested by IS_ERR, otherwise the wrong error code will be returned. Fixes: d1667b86 ("drm/hisilicon/hibmc: Add support for frame buffer") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/gpu/drm/drm_atomic_helper.c:1360:6: warning: symbol 'release_crtc_commit' was not declared. Should it be static? Signed-off-by:
-
- 19 Jan, 2017 8 commits
-
-
Gabriel Krisman Bertazi authored
This avoids using the deprecated drm_put_dev() and unload() hook interfaces in the qxl driver. Signed-off-by:
-
Gabriel Krisman Bertazi authored
This avoids using the deprecated drm_get_pci_dev() and load() hook interfaces in the qxl driver. The only tricky part is to ensure TTM debugfs initialization happens after the debugfs root node is created, which is done by moving that code into the debufs_init() hook. Tested on qemu with igt and running a WM on top of X. Changes since v1: - Drop verification for primary minor in qxl_debugsfs_init. Changes since V2: - Put new header together with other debugfs headers. Signed-off-by:
-
John Stultz authored
I've found that by just turning the chip on and off via the POWER_DOWN register, I end up getting i2c_transfer errors on HiKey. Investigating further, it turns out that some of the register state in hardware is getting lost, as the device registers are reset when the chip is powered down. Thus this patch simply re-writes the i2c address to the ADV7511_REG_EDID_I2C_ADDR register to ensure its properly set before we try to read the EDID data. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
John Stultz authored
Thus this patch changes the EDID probing logic so that we re-use the __adv7511_power_on/off() calls instead of duplciating logic. This does change behavior slightly as it adds the HPD signal pulse to the EDID probe path, but Archit has had a patch to add HPD signal pulse to the EDID probe path before, so this should address the cases where that helped. Another difference is that regcache_mark_dirty() is also called in the power off path once EDID is probed. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
John Stultz authored
In chasing down issues with EDID probing, I found some duplicated but incomplete logic used to power the chip on and off. This patch refactors the adv7511_power_on/off functions, so they can be used for internal needs. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Archit Taneja authored
On some adv7511 implementations, we can get some spurious disconnect signals which can cause monitor probing to fail. This patch enables HPD (hot plug detect) interrupt support which allows the monitor to be properly re-initialized when the spurious disconnect signal goes away. This also enables proper hotplug support. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Acked-by:
-
John Stultz authored
In chasing down a previous issue with EDID probing from calling drm_helper_hpd_irq_event() from irq context, Laurent noticed that the DRM documentation suggests that drm_kms_helper_hotplug_event() should be used instead. Thus this patch replaces drm_helper_hpd_irq_event() with drm_kms_helper_hotplug_event(), which requires we update the connector.status entry and only call _hotplug_event() when the status changes. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
John Stultz authored
I was recently seeing issues with EDID probing, where the logic to wait for the EDID read bit to be set by the IRQ wasn't happening and the code would time out and fail. Digging deeper, I found this was due to the fact that IRQs were disabled as we were running in IRQ context from the HPD signal. Thus this patch changes the logic to handle the HPD signal via a work_struct so we can be out of irq context. With this patch, the EDID probing on hotplug does not time out. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
- 18 Jan, 2017 12 commits
-
-
Shawn Guo authored
Use drm_crtc_from_index() to find drm_crtc for given index, so that we do not need to maintain a pointer array in struct vc4_dev. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1483961145-18453-7-git-send-email-shawnguo@kernel.org
-
Shawn Guo authored
Function tegra_crtc_from_pipe() does the exactly same thing as what crtc helper drm_crtc_from_index() provides. Use the helper to save some code. Signed-off-by:
-
Shawn Guo authored
Use drm_crtc_from_index() to find drm_crtc for given index. Signed-off-by:
-
Shawn Guo authored
Use drm_crtc_from_index() to find drm_crtc for given index, so that we do not need to maintain a pointer array in struct mtk_drm_private. Signed-off-by:
-
Shawn Guo authored
Use drm_crtc_from_index() to find drm_crtc for given index, so that we do not need to maintain a pointer array in struct kirin_drm_private. Reviewed-by: Xinliang Liu<z.liuxinliang@hisilicon.com> Signed-off-by:
-
Shawn Guo authored
Use drm_crtc_from_index() to find drm_crtc for given index, so that we do not need to maintain a pointer array in struct exynos_drm_private. Signed-off-by:
-
Laurent Pinchart authored
Make it clear that the core bridge/dw_hdmi.txt document isn't a device tree binding by itself but is meant to be referenced by platform device tree bindings, and update the Rockchip and Freescale DWC HDMI TX bindings to reference it. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Laurent Pinchart authored
According to the PHY IP core vendor, the SVSRET signal must be asserted before resetting the PHY. Tests on RK3288 and R-Car Gen3 showed no regression, the change should thus be safe. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Laurent Pinchart authored
The PHY reset signal is controlled by bit PHYRSTZ in the MC_PHYRSTZ register. The signal is active low on Gen1 PHYs and active high on Gen2 PHYs. The driver toggles the signal high then low, which is correct for all currently supported platforms, but the register values macros are incorrectly named. Replace them with a single macro named after the bit, and add a comment to the source code to explain the behaviour. The driver's behaviour isn't changed by this rename, the code will still need to be fixed to support Gen1 PHYs. Signed-off-by:
-
Laurent Pinchart authored
Replace the hardcoded register address numerical values with macros to clarify the code. This change has been tested by comparing the assembly code before and after the change. Signed-off-by:
-
Laurent Pinchart authored
Detect the PHY type and use it to handle the PHY type-specific SVSRET signal. Signed-off-by:
-
Laurent Pinchart authored
Use the device version queried at runtime instead of the device type provided through platform data to handle the overflow workaround. This will make support of other SoCs integrating the same HDMI TX controller version easier. Among the supported platforms only i.MX6DL and i.MX6Q have been identified as needing the workaround. Disabling it on Rockchip RK3288 (which integrates a v2.00a controller) didn't produce any error or artifact. Signed-off-by:
-
