With the decline of ISDN, this seems to have become almost completely
obsolete, and even in the past years before that, almost all remaining
users appear to have used mISDN instead.

Birger Harzenetter noted that he is still using i4l/hisax to take
advantage of the 'divert' driver for call diversion, but otherwise uses
mISDN on the same hardware. This is a rare edge case as far as I
can tell, but we are still breaking an actively used work flow
(see https://xkcd.com/1172/).

We debated moving i4l/hisax to staging as an intermediate step, but as
he is not likely to change the setup, and that would just delay breaking
this use case.  The alternatives here are to stay on stable kernels
< 5.2, to create an external driver repository for isdn4linux, or to
add divert functionality to mISDN.

Cc: Birger Harzenetter <WIMPy@yeti.dk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

isdn4linux is getting removed, and the gigaset driver can still
use the CAPI support, so this can all go away.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2019-05-30

This series contains updates to ice driver only.

Brett continues his work with interrupt handling by fixing an issue
where were writing to the incorrect register to disable all VF
interrupts.

Tony consolidates the unicast and multicast MAC filters into a single
new function.

Anirudh adds support for virtual channel vector mapping to receive and
transmit queues.  This uses a bitmap to associate indicated queues with
the specified vector.  Makes several cosmetic code cleanups, as well as
update the driver to align with the current specification for managing
MAC operation codes (opcodes).

Paul adds support for Forward Error Correction (FEC) and also adds the
ethtool get and set handlers to modify FEC parameters.

Bruce cleans up the driver code to fix a number of issues, such as,
reducing the scope of some local variables, reduce the number of
de-references by changing a local variable and reorder the code to
remove unnecessary "goto's".

Dave adds switch rules to be able to handle LLDP packets and in the
process, fix a couple of issues found, like stop treating DCBx state of
"not started" as an error and stop hard coding the filter information
flag to transmit.

Jacob updates the driver to allow for more granular debugging by
developers by using a distinct separate bit for dumping firmware logs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the new parameter block is initialised to 0 by kzmalloc we don't
need to mask & clear unused operational mode bits, they are already
unset.

Drop the pointless code.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
net: phy: improve handling of more complex C45 PHY's

This series tries to address few problematic aspects raised by
Russell. Concrete example is the Marvell 88x3310, the changes
should be helpful for other complex C45 PHY's too.

v2:
- added patch enabling interrupts also if phylib state machine
  isn't started
- removed patch dealing with the double link status read
  This one needs little bit more thinking and will go separately.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We face the issue that link change interrupt and link status may be
reported by different PHY layers. As a result the link change
interrupt may occur before the link status changes.
Export phy_queue_state_machine to allow PHY drivers to specify a
delay between link status change interrupt and link status check.

v2:
- change jiffies parameter type to unsigned long
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The phylib interrupt handler handles link change events only currently.
However PHY drivers may want to use other interrupt sources too,
e.g. to report temperature monitoring events. Therefore add a callback
to struct phy_driver allowing PHY drivers to implement a custom
interrupt handler.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Suggested-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is a step towards allowing PHY drivers to handle more
interrupt sources than just link change. E.g. several PHY's have
built-in temperature monitoring and can raise an interrupt if a
temperature threshold is exceeded. We may be interested in such
interrupts also if the phylib state machine isn't started.
Therefore move enabling interrupts to phy_request_interrupt().

v2:
- patch added to series
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

In some cases abs_ppfid could be printed without being initialized.

Fixes: 79284ade ("qed: Add llh ppfid interface and 100g support for offload protocols")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case a call to dsa_tree_setup() fails, an attempt to cleanup is made
by calling dsa_tree_remove_switch(), which should take care of
removing/unregistering any resources previously allocated. This does not
happen because it is conditioned by dst->setup being true, which is set
only after _all_ setup steps were performed successfully.

This is especially interesting when the internal MDIO bus is registered
but afterwards, a port setup fails and the mdiobus_unregister() is never
called. This leads to a BUG_ON() complaining about the fact that it's
trying to free an MDIO bus that's still registered.

Add proper error handling in all functions branching from
dsa_tree_setup().
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
r8169: decouple firmware handling code from actual driver code

These two patches are a step towards eventually factoring out firmware
handling code to a separate source file.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is a further step towards decoupling firmware handling from
the actual driver code. Firmware can be for PHY and/or MAC, and two
pairs of read/write functions are needed for handling PHY firmware and
MAC firmware respectively. Pass these functions via struct rtl_fw and
avoid the ugly switching of mdio_ops behind the back of rtl_writephy().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify the function a little bit and use strscpy() where appropriate.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Call the pll power down function also for chip versions 02..06 and
13..15. The MAC can't be powered down on these chip versions, but at
least they benefit from the speed-down power-saving if WoL is enabled.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The same skb_checksum_ops struct is defined twice in two different places,
leading to code duplication. Declare it as a global variable into a common
header instead of allocating it on the stack on each function call.
bloat-o-meter reports a slight code shrink.

add/remove: 1/1 grow/shrink: 0/10 up/down: 128/-1282 (-1154)
Function                                     old     new   delta
sctp_csum_ops                                  -     128    +128
crc32c_csum_ops                               16       -     -16
sctp_rcv                                    6616    6583     -33
sctp_packet_pack                            4542    4504     -38
nf_conntrack_sctp_packet                    4980    4926     -54
execute_masked_set_action                   6453    6389     -64
tcf_csum_sctp                                575     428    -147
sctp_gso_segment                            1292    1126    -166
sctp_csum_check                              579     412    -167
sctp_snat_handler                            957     772    -185
sctp_dnat_handler                           1321    1132    -189
l4proto_manip_pkt                           2536    2313    -223
Total: Before=359297613, After=359296459, chg -0.00%
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 283c16a2 ("indirect call wrappers: helpers to speed-up
indirect calls of builtin") introduces some macros to avoid doing
indirect calls.

Use these helpers to remove two indirect calls in the L4 checksum
calculation for devices which don't have hardware support for it.

As a test I generate packets with pktgen out to a dummy interface
with HW checksumming disabled, to have the checksum calculated in
every sent packet.
The packet rate measured with an i7-6700K CPU and a single pktgen
thread raised from 6143 to 6608 Kpps, an increase by 7.5%
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix sparse warning:

drivers/net/dsa/sja1105/sja1105_static_config.c:446:1: warning:
 symbol 'static_config_check_memory_size' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
connection tracking support for bridge

This patchset adds native connection tracking support for the bridge.

Patch #1 and #2 extract code from IPv4/IPv6 fragmentation core and
introduce the fraglist splitter. That splits a skbuff fraglist into
independent fragments.

Patch #3 and #4 also extract code from IPv4/IPv6 fragmentation core
and introduce the skbuff into fragments transformer. This can be used
by linearized skbuffs (eg. coming from nfqueue and ct helpers) as well
as cloned skbuffs (that are either seen either with taps or with bridge
port flooding).

Patch #5 moves the specific IPCB() code from these new fragment
splitter/transformer APIs into the IPv4 stack. The bridge has a
different control buffer layout and it starts using this new APIs in
this patchset.

Patch #6 adds basic infrastructure that allows to register bridge
conntrack support.

Patch #7 adds bridge conntrack support (only for IPv4 in this patch).

Patch #8 adds IPv6 support for the bridge conntrack support.

Patch #9 registers the IPv4/IPv6 conntrack hooks in case the bridge
conntrack is used to deal with local traffic, ie. prerouting -> input
bridge hook path. This cover the bridge interface has a IP address
scenario.

Before this patchset, only chance for people to do stateful filtering is
to use the `br_netfilter` emulation layer, that turns bridge frame into
IPv4/IPv6 packets and inject them into the IPv4/IPv6 hooks. Apparently,
this module allows users to use iptables and all of its feature-set from
the bridge, including stateful filtering. However, this approach is
flawed in many aspects that have been discussed many times. This is a
step forward to deprecate `br_netfilter'.

v2: Fix English typo in commit message.
v3: Fix another English typo in commit message.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables IPv4 and IPv6 conntrack from the bridge to deal with
local traffic. Hence, packets that are passed up to the local input path
are confirmed later on from the {ipv4,ipv6}_confirm() hooks.

For packets leaving the IP stack (ie. output path), fragmentation occurs
after the inet postrouting hook. Therefore, the bridge local out and
postrouting bridge hooks see fragments with conntrack objects, which is
inconsistent. In this case, we could defragment again from the bridge
output hook, but this is expensive. The recommended filtering spot for
outgoing locally generated traffic leaving through the bridge interface
is to use the classic IPv4/IPv6 output hook, which comes earlier.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

br_defrag() and br_fragment() indirections are added in case that IPv6
support comes as a module, to avoid pulling innecessary dependencies in.

The new fraglist iterator and fragment transformer APIs are used to
implement the refragmentation code.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.

This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.

The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).

The packet defragmentation is done through the ip_defrag() call.  This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.

The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.

This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.

Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.

The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.

Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds infrastructure to register and to unregister bridge
support for the conntrack module via nf_ct_bridge_register() and
nf_ct_bridge_unregister().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Deal with the IPCB() area away from the iterators.

The bridge codebase has its own control buffer layout, move specific
IP control buffer handling into the IPv4 codepath.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch exposes a new API to refragment a skbuff. This allows you to
split either a linear skbuff or to force the refragmentation of an
existing fraglist using a different mtu. The API consists of:

* ip6_frag_init(), that initializes the internal state of the transformer.
* ip6_frag_next(), that allows you to fetch the next fragment. This function
  internally allocates the skbuff that represents the fragment, it pushes
  the IPv6 header, and it also copies the payload for each fragment.

The ip6_frag_state object stores the internal state of the splitter.

This code has been extracted from ip6_fragment(). Symbols are also
exported to allow to reuse this iterator from the bridge codepath to
build its own refragmentation routine by reusing the existing codebase.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch exposes a new API to refragment a skbuff. This allows you to
split either a linear skbuff or to force the refragmentation of an
existing fraglist using a different mtu. The API consists of:

* ip_frag_init(), that initializes the internal state of the transformer.
* ip_frag_next(), that allows you to fetch the next fragment. This function
  internally allocates the skbuff that represents the fragment, it pushes
  the IPv4 header, and it also copies the payload for each fragment.

The ip_frag_state object stores the internal state of the splitter.

This code has been extracted from ip_do_fragment(). Symbols are also
exported to allow to reuse this iterator from the bridge codepath to
build its own refragmentation routine by reusing the existing codebase.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the skbuff fraglist split iterator. This API provides an
iterator to transform the fraglist into single skbuff objects, it
consists of:

* ip6_fraglist_init(), that initializes the internal state of the
  fraglist iterator.
* ip6_fraglist_prepare(), that restores the IPv6 header on the fragment.
* ip6_fraglist_next(), that retrieves the fragment from the fraglist and
  updates the internal state of the iterator to point to the next
  fragment in the fraglist.

The ip6_fraglist_iter object stores the internal state of the iterator.

This code has been extracted from ip6_fragment(). Symbols are also
exported to allow to reuse this iterator from the bridge codepath to
build its own refragmentation routine by reusing the existing codebase.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the skbuff fraglist splitter. This API provides an
iterator to transform the fraglist into single skbuff objects, it
consists of:

* ip_fraglist_init(), that initializes the internal state of the
  fraglist splitter.
* ip_fraglist_prepare(), that restores the IPv4 header on the
  fragments.
* ip_fraglist_next(), that retrieves the fragment from the fraglist and
  it updates the internal state of the splitter to point to the next
  fragment skbuff in the fraglist.

The ip_fraglist_iter object stores the internal state of the iterator.

This code has been extracted from ip_do_fragment(). Symbols are also
exported to allow to reuse this iterator from the bridge codepath to
build its own refragmentation routine by reusing the existing codebase.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jason Baron says:

====================
add TFO backup key

Christoph, Igor, and I have worked on an API that facilitates TFO key
rotation. This is a follow up to the series that Christoph previously
posted, with an API that meets both of our use-cases. Here's a
link to the previous work:
https://patchwork.ozlabs.org/cover/1013753/

Changes in v2:
  -spelling fixes in ip-sysctl.txt (Jeremy Sowden)
  -re-base to latest net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Demonstrate how the primary and backup TFO keys can be rotated while
minimizing the number of client cookies that are rejected.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add docs for /proc/sys/net/ipv4/tcp_fastopen_key
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Cc: Jeremy Sowden <jeremy@azazel.net>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the ability to add a backup TFO key as:

# echo "x-x-x-x,x-x-x-x" > /proc/sys/net/ipv4/tcp_fastopen_key

The key before the comma acks as the primary TFO key and the key after the
comma is the backup TFO key. This change is intended to be backwards
compatible since if only one key is set, userspace will simply read back
that single key as follows:

# echo "x-x-x-x" > /proc/sys/net/ipv4/tcp_fastopen_key
# cat /proc/sys/net/ipv4/tcp_fastopen_key
x-x-x-x
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for get/set of an optional backup key via TCP_FASTOPEN_KEY, in
addition to the current 'primary' key. The primary key is used to encrypt
and decrypt TFO cookies, while the backup is only used to decrypt TFO
cookies. The backup key is used to maximize successful TFO connections when
TFO keys are rotated.

Currently, TCP_FASTOPEN_KEY allows a single 16-byte primary key to be set.
This patch now allows a 32-byte value to be set, where the first 16 bytes
are used as the primary key and the second 16 bytes are used for the backup
key. Similarly, for getsockopt(), we can receive a 32-byte value as output
if requested. If a 16-byte value is used to set the primary key via
TCP_FASTOPEN_KEY, then any previously set backup key will be removed.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We would like to be able to rotate TFO keys while minimizing the number of
client cookies that are rejected. Currently, we have only one key which can
be used to generate and validate cookies, thus if we simply replace this
key clients can easily have cookies rejected upon rotation.

We propose having the ability to have both a primary key and a backup key.
The primary key is used to generate as well as to validate cookies.
The backup is only used to validate cookies. Thus, keys can be rotated as:

1) generate new key
2) add new key as the backup key
3) swap the primary and backup key, thus setting the new key as the primary

We don't simply set the new key as the primary key and move the old key to
the backup slot because the ip may be behind a load balancer and we further
allow for the fact that all machines behind the load balancer will not be
updated simultaneously.

We make use of this infrastructure in subsequent patches.
Suggested-by: Igor Lubashev <ilubashe@akamai.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Restructure __tcp_fastopen_cookie_gen() to take a 'struct crypto_cipher'
argument and rename it as __tcp_fastopen_cookie_gen_cipher(). Subsequent
patches will provide different ciphers based on which key is being used for
the cookie generation.
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Hardware monitoring enhancements

This patchset from Vadim provides various hardware monitoring related
improvements for mlxsw.

Patch #1 allows querying firmware version from the switch driver when
the underlying bus is I2C. This is useful for baseboard management
controller (BMC) systems that communicate with the ASIC over I2C.

Patch #2 improves driver's performance over I2C by utilizing larger
transactions sizes, if possible.

Patch #3 re-orders driver's initialization sequence to enforce a
specific firmware version before new firmware features are utilized.
This is a prerequisite for patches #4-#6.

Patches #4-#6 expose the temperature of inter-connect devices
(gearboxes) that are present in Mellanox SN3800 systems and split
2x50Gb/s lanes to 4x25Gb/s lanes.

Patches #7-#8 reduce the transaction size when reading SFP modules
temperatures, which is crucial when working over I2C.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Obtain SFP modules temperatures through MTMP register instead of MTBR
register, because the first one utilizes shorter transaction buffer size
for request. It improves performance in case low frequency interface
(I2C) is used for communication with a chip.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend sensor index size for Management Temperature Bulk Register
(MTBR) and Management Temperature Register (MTMP) upto 12 bits in
order to align registers description with new version of PRM document.
Add define for base sensor index for SFP modules temperature reading
for MTMP register.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new attributes to hwmon object for exposing inter-connects temperature
input, highest, reset_history temperatures and label. Temperatures are read
from Management Temperature Register.
The number of inter-connect devices is read from Management General
Peripheral Information Register.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add MGPIR - Management General Peripheral Information Register, which
allows software to query the hardware and firmware general information
of peripheral entities as Gearboxes etc.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend the size of sensor_index field of MTMP (Management Temperature
Register), from 8 to 12 bits due to hardware change.
Add define for sensor index for Gear Box (inter-connects) temperature
reading.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>