- 13 Jan, 2016 2 commits
-
-
Dmitry Torokhov authored
Bring in update to xpad driver improves support of Xbox One and wireless controllers and fixes handling of concurrent requests to force feedback and LEDs.
-
Pavel Rojtberg authored
Apparently the Covert Forces ID is not Covert Forces pad exclusive, but rather denotes a new firmware version that can be found on all new controllers and can be also updated on old hardware using Windows 10. see: https://github.com/paroj/xpad/issues/19Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 12 Jan, 2016 2 commits
-
-
Nick Dyer authored
Both T100 and T9 handle range and orientation in a similar fashion. Reduce duplication between the two implementations. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Benjamin Tissoires authored
When using a protocol v2 or v3 hardware, elantech uses the function elantech_report_semi_mt_data() to report data. This devices are rather creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid touch is reported. Anyway, userspace (libinput) is now confused by these (0,0) touches, and detect them as palm, and rejects them. Commit 3c0213d1 ("Input: elantech - fix semi-mt protocol for v3 HW") was sufficient enough for xf86-input-synaptics and libinput before it has palm rejection. Now we need to actually tell libinput that this device is a semi-mt one and it should not rely on the actual values of the 2 touches. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 11 Jan, 2016 1 commit
-
-
Peter Hutterer authored
As of e0361b70 ("Input: wacom_w8001 - split the touch and pen devices into two devices") the touch events aren't multiplexed over the same device anymore, the use of ABS_MT_TOOL_TYPE is superfluous. And even before then it only ever sent MT_TOOL_TYPE_FINGER anyway. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 10 Jan, 2016 1 commit
-
-
Dmitry Torokhov authored
Commit 4ea14a53 ("Input: gpio-keys - report error when disabling unsupported key") tried let user know that they attempted to disable an unsupported key, unfortunately the check is wrong as it believes that all codes are invalid. Fix it by ensuring that keys that we try to disable are subset of keys (or switches) that device reports. Fixes: 4ea14a53 ("Input: gpio-keys - report error when disabling unsupported key") Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 08 Jan, 2016 2 commits
-
-
Dmitry Torokhov authored
Commit da1f026b ("Keyboard: omap-keypad: use matrix_keypad.h") switched the driver to use matrix keypad infrastructure, which made array of keycodes to be unsigned short, and caused the test for negativity never trigger. This leads to the following static checker warning: drivers/input/keyboard/omap-keypad.c:158 omap_kp_tasklet() warn: 'keycodes[]' is never negative. Given that we did not care about this check for a few years already let's simply remove it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dave Gerlach authored
Remove write to REG_IRQCLR and REG_IRQWAKEUP in interrupt handler for IRQENB_HW_PEN as the resume handler should and does clear REG_IRQWAKEUP. IRQENB_HW_PEN bit is set in irqclr so that all interrupts get cleared later so let IRQENB_HW_PEN be cleared by that. Without this patch wakeup events from TSC_ADC do not work because pending interrupts in TSC_ADC were causing HW_PEN interrupt, needed for wake from suspend modes, to get disabled immediately by IRQ handler after being enabled and preventing wake from happening. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 07 Jan, 2016 5 commits
-
-
Dan Carpenter authored
It feels like we should set the tasklet data before enabling it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Because of the wrong condition we'd never retry firmware update. Acked-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Merge several improvements to Goodix touchscreen driver: - power management support - configuration upload - axis swapping and inversion
-
Pali Rohár authored
This patch moves v3 pinnacle code for trackstick detection from alps_hw_init_v3() to alps_set_protocol() so ALPS_DUALPOINT flag can be cleared before registering trackstick input device in kernel. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Pali Rohár authored
This patch adds detection of trackstick for v7 protocol devices. Code in this patch is used in official Dell touchpad linux drivers for Dell models: Dell Latitude E5250/5250, E5450/5450, E5550/5550 Detection code and base reg for alps v3 rushmore and v7 devices is exacly same. Also user in bug https://bugzilla.kernel.org/show_bug.cgi?id=94801 reported that Toshiba Sattellite Z30-A-1DG has only alps v7 touchpad device without trackstick and kernel reports to userspace also redundant trackstick device. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 04 Jan, 2016 4 commits
-
-
Dmitry Torokhov authored
When lighting up the segment identifying wireless controller, Instead of sending command directly to the controller, let's do it via LED API (usinf led_set_brightness) so that LED object state is in sync with controller state and we'll light up the correct segment on resume as well. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Pavel Rojtberg authored
The irq_out urb is dead after suspend/ resume on my x360 wr pad. (also reproduced by Zachary Lund [0]) Work around this by implementing suspend, resume, and reset_resume callbacks and properly shutting down URBs on suspend and restarting them on resume. [0]: https://github.com/paroj/xpad/issues/6Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Pierre-Loup A. Griffais authored
There's apparently a serial number woven into both input and output packets; neglecting to specify a valid serial number causes the controller to ignore the rumble packets. The scale of the rumble was also apparently halved in the packets. The initialization packet had to be changed to allow force feedback to work. see https://github.com/paroj/xpad/issues/7 for details. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Pavel Rojtberg authored
Track the status of the irq_out URB to prevent submission iof new requests while current one is active. Failure to do so results in the "URB submitted while active" warning/stack trace. Store pending brightness and FF effect in the driver structure and replace it with the latest requests until the device is ready to process next request. Alternate serving LED vs FF requests to make sure one does not starve another. See [1] for discussion. Inspired by patch of Sarah Bessmer [2]. [1]: http://www.spinics.net/lists/linux-input/msg40708.html [2]: http://www.spinics.net/lists/linux-input/msg31450.htmlSigned-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 03 Jan, 2016 2 commits
-
-
Geliang Tang authored
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Julia Lawall authored
The bma150_cfg structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 20 Dec, 2015 1 commit
-
-
Dan Carpenter authored
We didn't check input_allocate_device() for failures so it could lead to a NULL deref. Fixes: 6b0f8f9c ('Input: add eGalaxTouch serial touchscreen driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 19 Dec, 2015 3 commits
-
-
Elias Vanderstuyft authored
Currently the user can set ff_effects_max to zero with the EV_FF bit (and the FF_GAIN and/or FF_AUTOCENTER bits) set, in this case the uninitialized methods ff->set_gain and/or ff->set_autocenter can be dereferenced, resulting in a kernel oops. Check in uinput_create_device() and print a helpful message and return -EINVAL in case the check fails. Signed-off-by: Elias Vanderstuyft <elias.vds@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
David Herrmann authored
Rework the uinput ABS validation to check passed absinfo data immediately, but do ABS initialization as last step in UI_DEV_CREATE. The behavior observed by user-space is not changed, as ABS initialization was never checked for errors. With this in place, the order of device initialization and abs configuration is no longer fixed. Userspace can initialize the device and afterwards set absinfo just fine. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Benjamin Tissoires authored
This adds two new ioctls, UINPUT_DEV_SETUP and UI_ABS_SETUP, that replaces the old device setup method (by write()'ing "struct uinput_user_dev" to the node). The old method is not easily extendable and requires huge payloads. Furthermore, overloading write() without properly versioned objects is error-prone. Therefore, we introduce two new ioctls to replace the old method. These ioctls support all features of the old method, plus a "resolution" field for absinfo. Furthermore, it's properly forward-compatible to new ABS codes and a growing "struct input_absinfo" structure. UI_ABS_SETUP also allows user-space to skip unknown axes if not set. There is no need to copy the whole array temporarily into the kernel, but instead the caller issues several ioctl where we copy each value manually. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 18 Dec, 2015 7 commits
-
-
Karsten Merker authored
The goodix touchscreen driver uses a "rotated_screen" flag for systems on which the touchscreen is mounted rotated by 180 degrees with respect to the display. With the addition of support for the dt properties "touchscreen-inverted-x" and "touchscreen-inverted-y", a separate "rotated_screen" flag is not necessary anymore. This patch replaces it by setting the inverted_x and inverted_y flags instead. Signed-off-by: Karsten Merker <merker@debian.org> Reviewed-by: Irina Tirdea <irina.tirdea@intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Karsten Merker authored
Implement support for the following device-tree and ACPI 5.1 DSD properties in the goodix touchscreen driver: - touchscreen-inverted-x: X axis is inverted (boolean) - touchscreen-inverted-y: Y axis is inverted (boolean) - touchscreen-swapped-x-y: X and Y axis are swapped (boolean) These are necessary on tablets which have a display in portrait format while the touchscreen is in landscape format, such as e.g. the MSI Primo 81. Signed-off-by: Karsten Merker <merker@debian.org> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Irina Tirdea <irina.tirdea@intel.com> (with ACPI DSD properties) Tested-by: Aleksei Mamlin <mamlinav@gmail.com> (with device-tree properties) Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Irina Tirdea authored
Use goodix_i2c_write_u8 instead of i2c_master_send to simplify code. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Irina Tirdea authored
Implement suspend/resume for goodix driver. The suspend and resume process uses the gpio pins. If the device ACPI/DT information does not declare gpio pins, suspend/resume will not be available for these devices. This is based on Goodix datasheets for GT911 and GT9271 and on Goodix driver gt9xx.c for Android (publicly available in Android kernel trees for various devices). Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Irina Tirdea authored
Goodix devices can be configured by writing custom data to the device at init. The configuration data is read with request_firmware from "goodix_<id>_cfg.bin", where <id> is the product id read from the device (e.g.: goodix_911_cfg.bin for Goodix GT911, goodix_9271_cfg.bin for GT9271). The configuration information has a specific format described in the Goodix datasheet. It includes X/Y resolution, maximum supported touch points, interrupt flags, various sensitivity factors and settings for advanced features (like gesture recognition). Before writing the firmware, it is necessary to reset the device. If the device ACPI/DT information does not declare gpio pins (needed for reset), writing the firmware will not be available for these devices. This is based on Goodix datasheets for GT911 and GT9271 and on Goodix driver gt9xx.c for Android (publicly available in Android kernel trees for various devices). Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Irina Tirdea authored
After power on, it is recommended that the driver resets the device. The reset procedure timing is described in the datasheet and is used at device init (before writing device configuration) and for power management. It is a sequence of setting the interrupt and reset pins high/low at specific timing intervals. This procedure also includes setting the slave address to the one specified in the ACPI/device tree. This is based on Goodix datasheets for GT911 and GT9271 and on Goodix driver gt9xx.c for Android (publicly available in Android kernel trees for various devices). For reset the driver needs to control the interrupt and reset gpio pins (configured through ACPI/device tree). For devices that do not have the gpio pins properly declared, the functionality depending on these pins will not be available, but the device can still be used with basic functionality. For both device tree and ACPI, the interrupt gpio pin configuration is read from the "irq-gpios" property and the reset pin configuration is read from the "reset-gpios" property. For ACPI 5.1, named properties can be specified using the _DSD section. This functionality will not be available for devices that use indexed gpio pins declared in the _CRS section (we need to provide backward compatibility with devices that do not support using the interrupt gpio pin as output). For ACPI, the pins can be specified using ACPI 5.1: Device (STAC) { Name (_HID, "GDIX1001") ... Method (_CRS, 0, Serialized) { Name (RBUF, ResourceTemplate () { I2cSerialBus (0x0014, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\I2C0", 0x00, ResourceConsumer, , ) GpioInt (Edge, ActiveHigh, Exclusive, PullNone, 0x0000, "\\I2C0", 0x00, ResourceConsumer, , ) { // Pin list 0 } GpioIo (Exclusive, PullDown, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\I2C0", 0x00, ResourceConsumer, , ) { 1 } }) Return (RBUF) } Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package (2) {"irq-gpios", Package() {^STAC, 0, 0, 0 }}, Package (2) {"reset-gpios", Package() {^STAC, 1, 0, 0 }}, ... } } Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Bastien Nocera <hadess@hadess.net> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Irina Tirdea authored
Each of the Goodix devices supported by this driver has a fixed size for the configuration information registers. The size varies depending on the device and is specified in the datasheet. Use the proper configuration length as specified in the datasheet for each device model, so we do not read more than the actual size of the configuration registers. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Bastien Nocera <hadess@hadess.net> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 17 Dec, 2015 10 commits
-
-
Dmitry Torokhov authored
Bring in changes to limit number of protocols we try on pass-though PS/2 ports so that probe ocmpletes faster.
-
Dmitry Torokhov authored
This makes Logitech PS2++ protocol implementation consistent with the naming in other protocols. Also mark the stub as "static inline" Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
PS/2 protocol is slow, and using it with pass-through port (where we encapsulate PS/2 into PS/2) is slower yet so it takes quite a bit of time to do full protocol discovery for device attached to a pass-through port. However, so far we have not see anything but trackpoints or basic PS/2 mice on pass-through ports, so let's limit protocols that we probe there to Trackpoint, IntelliMouse Explorer, IntelliMouse, and bare PS/2 protocol, and avoid other extended protocols, such as Synaptics, ALPS, etc. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
In preparation of limiting protocols that we try on pass-through ports, let's rework initialization code and factor common code into psmouse_try_protocol() that accepts protocol type (instead of detec() function pointer) and can, for most protocols, perform both detection and initialization. Note that this removes option of forcing Lifebook protocol on devices that are not recognized by lifebook_detect() as having the hardware, but I do not recall anyone using this option. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
We move protocol descriptions and psmouse_find_by_type() and pmouse_find_by_name() so that we can use them without forward declarations in the subsequent patches. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
When Cypress protocol support is disabled cypress_init() is a stub that always returns -ENOSYS, so there is not point in testing for CONFIG_MOUSE_PS2_CYPRESS after we decided that we are dealing with a Cypress device. Also, we should only be calling cypress_detect() when set_properties argument is "true", like with other protocols. There is a slight change in behavior to make follow-up patches more uniform: when we detect Cypress but its initialization fails, instead of immediately returning PSMOUSE_PS2 protocol we now continue trying IntelliMouse [Explorer]. Given that Cypress devices only have issue with Sentelic probes probing Imtellimouse should be safe. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
The fact that we were calling focaltech_init() even when Focaltech support is disabled was confusing. Rearrange the code so that if support is disabled we continue to fall through the rest of protocol probing code until we get to full reset that Focaltech devices need to work properly. Also, replace focaltech_init() with a stub now that it is only called when protocol is enabled. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
The module was using non-standard comment style with comment blocks often starting at the very beginning of a line instead of being aligned with the code. Let's switch to standard formatting. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Instead of a series mostly exclusive "if" statements testing protocol type of the mouse let's use "switch" statement. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Marcin Sochacki <msochacki+kernel@gmail.com> Tested-by: Till <till2.schaefer@uni-dortmund.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Pierre-Loup A. Griffais authored
Handle the "a new device is present" message properly by dynamically creating the input device at this point in time. This means we now do not "preallocate" all 4 devices when a single wireless base station is seen. This requires a workqueue as we are in interrupt context when we learn about this. Also properly disconnect any devices that we are told are removed. Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-