- 13 Nov, 2018 40 commits
-
-
Filipe Manana authored
commit 3527a018 upstream. At inode.c:compress_file_range(), under the "free_pages_out" label, we can end up dereferencing the "pages" pointer when it has a NULL value. This case happens when "start" has a value of 0 and we fail to allocate memory for the "pages" pointer. When that happens we jump to the "cont" label and then enter the "if (start == 0)" branch where we immediately call the cow_file_range_inline() function. If that function returns 0 (success creating an inline extent) or an error (like -ENOMEM for example) we jump to the "free_pages_out" label and then access "pages[i]" leading to a NULL pointer dereference, since "nr_pages" has a value greater than zero at that point. Fix this by setting "nr_pages" to 0 when we fail to allocate memory for the "pages" pointer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201119 Fixes: 771ed689 ("Btrfs: Optimize compressed writeback and reads") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qu Wenruo authored
commit 9c7b0c2e upstream. [BUG] In the following case, rescan won't zero out the number of qgroup 1/0: $ mkfs.btrfs -fq $DEV $ mount $DEV /mnt $ btrfs quota enable /mnt $ btrfs qgroup create 1/0 /mnt $ btrfs sub create /mnt/sub $ btrfs qgroup assign 0/257 1/0 /mnt $ dd if=/dev/urandom of=/mnt/sub/file bs=1k count=1000 $ btrfs sub snap /mnt/sub /mnt/snap $ btrfs quota rescan -w /mnt $ btrfs qgroup show -pcre /mnt qgroupid rfer excl max_rfer max_excl parent child -------- ---- ---- -------- -------- ------ ----- 0/5 16.00KiB 16.00KiB none none --- --- 0/257 1016.00KiB 16.00KiB none none 1/0 --- 0/258 1016.00KiB 16.00KiB none none --- --- 1/0 1016.00KiB 16.00KiB none none --- 0/257 So far so good, but: $ btrfs qgroup remove 0/257 1/0 /mnt WARNING: quotas may be inconsistent, rescan needed $ btrfs quota rescan -w /mnt $ btrfs qgroup show -pcre /mnt qgoupid rfer excl max_rfer max_excl parent child -------- ---- ---- -------- -------- ------ ----- 0/5 16.00KiB 16.00KiB none none --- --- 0/257 1016.00KiB 16.00KiB none none --- --- 0/258 1016.00KiB 16.00KiB none none --- --- 1/0 1016.00KiB 16.00KiB none none --- --- ^^^^^^^^^^ ^^^^^^^^ not cleared [CAUSE] Before rescan we call qgroup_rescan_zero_tracking() to zero out all qgroups' accounting numbers. However we don't mark all qgroups dirty, but rely on rescan to do so. If we have any high level qgroup without children, it won't be marked dirty during rescan, since we cannot reach that qgroup. This will cause QGROUP_INFO items of childless qgroups never get updated in the quota tree, thus their numbers will stay the same in "btrfs qgroup show" output. [FIX] Just mark all qgroups dirty in qgroup_rescan_zero_tracking(), so even if we have childless qgroups, their QGROUP_INFO items will still get updated during rescan. Reported-by:
Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Filipe Manana authored
commit 0f375eed upstream. In a scenario like the following: mkdir /mnt/A # inode 258 mkdir /mnt/B # inode 259 touch /mnt/B/bar # inode 260 sync mv /mnt/B/bar /mnt/A/bar mv -T /mnt/A /mnt/B fsync /mnt/B/bar <power fail> After replaying the log we end up with file bar having 2 hard links, both with the name 'bar' and one in the directory with inode number 258 and the other in the directory with inode number 259. Also, we end up with the directory inode 259 still existing and with the directory inode 258 still named as 'A', instead of 'B'. In this scenario, file 'bar' should only have one hard link, located at directory inode 258, the directory inode 259 should not exist anymore and the name for directory inode 258 should be 'B'. This incorrect behaviour happens because when attempting to log the old parents of an inode, we skip any parents that no longer exist. Fix this by forcing a full commit if an old parent no longer exists. A test case for fstests follows soon. CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Filipe Manana authored
commit f2d72f42 upstream. When replaying a log which contains a tmpfile (which necessarily has a link count of 0) we end up calling inc_nlink(), at fs/btrfs/tree-log.c:replay_one_buffer(), which produces a warning like the following: [195191.943673] WARNING: CPU: 0 PID: 6924 at fs/inode.c:342 inc_nlink+0x33/0x40 [195191.943723] CPU: 0 PID: 6924 Comm: mount Not tainted 4.19.0-rc6-btrfs-next-38 #1 [195191.943724] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [195191.943726] RIP: 0010:inc_nlink+0x33/0x40 [195191.943728] RSP: 0018:ffffb96e425e3870 EFLAGS: 00010246 [195191.943730] RAX: 0000000000000000 RBX: ffff8c0d1e6af4f0 RCX: 0000000000000006 [195191.943731] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8c0d1e6af4f0 [195191.943731] RBP: 0000000000000097 R08: 0000000000000001 R09: 0000000000000000 [195191.943732] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb96e425e3a60 [195191.943733] R13: ffff8c0d10cff0c8 R14: ffff8c0d0d515348 R15: ffff8c0d78a1b3f8 [195191.943735] FS: 00007f570ee24480(0000) GS:ffff8c0dfb200000(0000) knlGS:0000000000000000 [195191.943736] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [195191.943737] CR2: 00005593286277c8 CR3: 00000000bb8f2006 CR4: 00000000003606f0 [195191.943739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [195191.943740] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [195191.943741] Call Trace: [195191.943778] replay_one_buffer+0x797/0x7d0 [btrfs] [195191.943802] walk_up_log_tree+0x1c1/0x250 [btrfs] [195191.943809] ? rcu_read_lock_sched_held+0x3f/0x70 [195191.943825] walk_log_tree+0xae/0x1d0 [btrfs] [195191.943840] btrfs_recover_log_trees+0x1d7/0x4d0 [btrfs] [195191.943856] ? replay_dir_deletes+0x280/0x280 [btrfs] [195191.943870] open_ctree+0x1c3b/0x22a0 [btrfs] [195191.943887] btrfs_mount_root+0x6b4/0x800 [btrfs] [195191.943894] ? rcu_read_lock_sched_held+0x3f/0x70 [195191.943899] ? pcpu_alloc+0x55b/0x7c0 [195191.943906] ? mount_fs+0x3b/0x140 [195191.943908] mount_fs+0x3b/0x140 [195191.943912] ? __init_waitqueue_head+0x36/0x50 [195191.943916] vfs_kern_mount+0x62/0x160 [195191.943927] btrfs_mount+0x134/0x890 [btrfs] [195191.943936] ? rcu_read_lock_sched_held+0x3f/0x70 [195191.943938] ? pcpu_alloc+0x55b/0x7c0 [195191.943943] ? mount_fs+0x3b/0x140 [195191.943952] ? btrfs_remount+0x570/0x570 [btrfs] [195191.943954] mount_fs+0x3b/0x140 [195191.943956] ? __init_waitqueue_head+0x36/0x50 [195191.943960] vfs_kern_mount+0x62/0x160 [195191.943963] do_mount+0x1f9/0xd40 [195191.943967] ? memdup_user+0x4b/0x70 [195191.943971] ksys_mount+0x7e/0xd0 [195191.943974] __x64_sys_mount+0x21/0x30 [195191.943977] do_syscall_64+0x60/0x1b0 [195191.943980] entry_SYSCALL_64_after_hwframe+0x49/0xbe [195191.943983] RIP: 0033:0x7f570e4e524a [195191.943986] RSP: 002b:00007ffd83589478 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [195191.943989] RAX: ffffffffffffffda RBX: 0000563f335b2060 RCX: 00007f570e4e524a [195191.943990] RDX: 0000563f335b2240 RSI: 0000563f335b2280 RDI: 0000563f335b2260 [195191.943992] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000020 [195191.943993] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000563f335b2260 [195191.943994] R13: 0000563f335b2240 R14: 0000000000000000 R15: 00000000ffffffff [195191.944002] irq event stamp: 8688 [195191.944010] hardirqs last enabled at (8687): [<ffffffff9cb004c3>] console_unlock+0x503/0x640 [195191.944012] hardirqs last disabled at (8688): [<ffffffff9ca037dd>] trace_hardirqs_off_thunk+0x1a/0x1c [195191.944018] softirqs last enabled at (8638): [<ffffffff9cc0a5d1>] __set_page_dirty_nobuffers+0x101/0x150 [195191.944020] softirqs last disabled at (8634): [<ffffffff9cc26bbe>] wb_wakeup_delayed+0x2e/0x60 [195191.944022] ---[ end trace 5d6e873a9a0b811a ]--- This happens because the inode does not have the flag I_LINKABLE set, which is a runtime only flag, not meant to be persisted, set when the inode is created through open(2) if the flag O_EXCL is not passed to it. Except for the warning, there are no other consequences (like corruptions or metadata inconsistencies). Since it's pointless to replay a tmpfile as it would be deleted in a later phase of the log replay procedure (it has a link count of 0), fix this by not logging tmpfiles and if a tmpfile is found in a log (created by a kernel without this change), skip the replay of the inode. A test case for fstests follows soon. Fixes: 471d557a ("Btrfs: fix loss of prealloc extents past i_size after fsync log replay") CC: stable@vger.kernel.org # 4.18+ Reported-by:
Martin Steigerwald <martin@lichtvoll.de> Link: https://lore.kernel.org/linux-btrfs/3666619.NTnn27ZJZE@merkaba/Signed-off-by:
-
Josef Bacik authored
commit 545e3366 upstream. Allocating new chunks modifies both the extent and chunk tree, which can trigger new chunk allocations. So instead of doing list_for_each_safe, just do while (!list_empty()) so we make sure we don't exit with other pending bg's still on our list. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
-
Josef Bacik authored
commit 553cceb4 upstream. We need to clear the max_extent_size when we clear bits from a bitmap since it could have been from the range that contains the max_extent_size. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Josef Bacik authored
commit 84de76a2 upstream. If we're allocating a new space cache inode it's likely going to be under a transaction handle, so we need to use memalloc_nofs_save() in order to avoid deadlocks, and more importantly lockdep messages that make xfstests fail. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Josef Bacik authored
commit f45c752b upstream. We want to release the unused reservation we have since it refills the delayed refs reserve, which will make everything go smoother when running the delayed refs if we're short on our reservation. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Chris Mason authored
commit 7703bdd8 upstream. During buffered writes, we follow this basic series of steps: again: lock all the pages wait for writeback on all the pages Take the extent range lock wait for ordered extents on the whole range clean all the pages if (copy_from_user_in_atomic() hits a fault) { drop our locks goto again; } dirty all the pages release all the locks The extra waiting, cleaning and locking are there to make sure we don't modify pages in flight to the drive, after they've been crc'd. If some of the pages in the range were already dirty when the write began, and we need to goto again, we create a window where a dirty page has been cleaned and unlocked. It may be reclaimed before we're able to lock it again, which means we'll read the old contents off the drive and lose any modifications that had been pending writeback. We don't actually need to clean the pages. All of the other locking in place makes sure we don't start IO on the pages, so we can just leave them dirty for the duration of the write. Fixes: 73d59314 (the original btrfs merge) CC: stable@vger.kernel.org # v4.4+ Signed-off-by:
Chris Mason <clm@fb.com> Reviewed-by:
-
Josef Bacik authored
commit 3aa7c7a3 upstream. While testing my backport I noticed there was a panic if I ran generic/416 generic/417 generic/418 all in a row. This just happened to uncover a race where we had outstanding IO after we destroy all of our workqueues, and then we'd go to queue the endio work on those free'd workqueues. This is because we aren't waiting for the caching threads to be done before freeing everything up, so to fix this make sure we wait on any outstanding caching that's being done before we free up the block group, so we're sure to be done with all IO by the time we get to btrfs_stop_all_workers(). This fixes the panic I was seeing consistently in testing. ------------[ cut here ]------------ kernel BUG at fs/btrfs/volumes.c:6112! SMP PTI Modules linked in: CPU: 1 PID: 27165 Comm: kworker/u4:7 Not tainted 4.16.0-02155-g3553e54a578d-dirty #875 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: btrfs-cache btrfs_cache_helper RIP: 0010:btrfs_map_bio+0x346/0x370 RSP: 0000:ffffc900061e79d0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff880071542e00 RCX: 0000000000533000 RDX: ffff88006bb74380 RSI: 0000000000000008 RDI: ffff880078160000 RBP: 0000000000000001 R08: ffff8800781cd200 R09: 0000000000503000 R10: ffff88006cd21200 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8800781cd200 R15: ffff880071542e00 FS: 0000000000000000(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000817ffc4 CR3: 0000000078314000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btree_submit_bio_hook+0x8a/0xd0 submit_one_bio+0x5d/0x80 read_extent_buffer_pages+0x18a/0x320 btree_read_extent_buffer_pages+0xbc/0x200 ? alloc_extent_buffer+0x359/0x3e0 read_tree_block+0x3d/0x60 read_block_for_search.isra.30+0x1a5/0x360 btrfs_search_slot+0x41b/0xa10 btrfs_next_old_leaf+0x212/0x470 caching_thread+0x323/0x490 normal_work_helper+0xc5/0x310 process_one_work+0x141/0x340 worker_thread+0x44/0x3c0 kthread+0xf8/0x130 ? process_one_work+0x340/0x340 ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 RIP: btrfs_map_bio+0x346/0x370 RSP: ffffc900061e79d0 ---[ end trace 827eb13e50846033 ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled ---[ end Kernel panic - not syncing: Fatal exception CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Jeff Mahoney authored
commit fee7acc3 upstream. Commit 499f377f (btrfs: iterate over unused chunk space in FITRIM) fixed free space trimming, but introduced latency when it was running. This is due to it pinning the transaction using both a incremented refcount and holding the commit root sem for the duration of a single trim operation. This was to ensure safety but it's unnecessary. We already hold the the chunk mutex so we know that the chunk we're using can't be allocated while we're trimming it. In order to check against chunks allocated already in this transaction, we need to check the pending chunks list. To to that safely without joining the transaction (or attaching than then having to commit it) we need to ensure that the dev root's commit root doesn't change underneath us and the pending chunk lists stays around until we're done with it. We can ensure the former by holding the commit root sem and the latter by pinning the transaction. We do this now, but the critical section covers the trim operation itself and we don't need to do that. This patch moves the pinning and unpinning logic into helpers and unpins the transaction after performing the search and check for pending chunks. Limiting the critical section of the transaction pinning improves the latency substantially on slower storage (e.g. image files over NFS). Fixes: 499f377f ("btrfs: iterate over unused chunk space in FITRIM") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
-
Jeff Mahoney authored
commit 0be88e36 upstream. We check whether any device the file system is using supports discard in the ioctl call, but then we attempt to trim free extents on every device regardless of whether discard is supported. Due to the way we mask off EOPNOTSUPP, we can end up issuing the trim operations on each free range on devices that don't support it, just wasting time. Fixes: 499f377f ("btrfs: iterate over unused chunk space in FITRIM") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Jeff Mahoney authored
commit d4e329de upstream. btrfs_trim_fs iterates over the fs_devices->alloc_list while holding the device_list_mutex. The problem is that ->alloc_list is protected by the chunk mutex. We don't want to hold the chunk mutex over the trim of the entire file system. Fortunately, the ->dev_list list is protected by the dev_list mutex and while it will give us all devices, including read-only devices, we already just skip the read-only devices. Then we can continue to take and release the chunk mutex while scanning each device. Fixes: 499f377f ("btrfs: iterate over unused chunk space in FITRIM") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Qu Wenruo authored
commit 6ba9fc8e upstream. [BUG] fstrim on some btrfs only trims the unallocated space, not trimming any space in existing block groups. [CAUSE] Before fstrim_range passed to btrfs_trim_fs(), it gets truncated to range [0, super->total_bytes). So later btrfs_trim_fs() will only be able to trim block groups in range [0, super->total_bytes). While for btrfs, any bytenr aligned to sectorsize is valid, since btrfs uses its logical address space, there is nothing limiting the location where we put block groups. For filesystem with frequent balance, it's quite easy to relocate all block groups and bytenr of block groups will start beyond super->total_bytes. In that case, btrfs will not trim existing block groups. [FIX] Just remove the truncation in btrfs_ioctl_fitrim(), so btrfs_trim_fs() can get the unmodified range, which is normally set to [0, U64_MAX]. Reported-by:
Chris Murphy <lists@colorremedies.com> Fixes: f4c697e6 ("btrfs: return EINVAL if start > total_bytes in fitrim ioctl") CC: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
-
Qu Wenruo authored
commit 93bba24d upstream. Function btrfs_trim_fs() doesn't handle errors in a consistent way. If error happens when trimming existing block groups, it will skip the remaining blocks and continue to trim unallocated space for each device. The return value will only reflect the final error from device trimming. This patch will fix such behavior by: 1) Recording the last error from block group or device trimming The return value will also reflect the last error during trimming. Make developer more aware of the problem. 2) Continuing trimming if possible If we failed to trim one block group or device, we could still try the next block group or device. 3) Report number of failures during block group and device trimming It would be less noisy, but still gives user a brief summary of what's going wrong. Such behavior can avoid confusion for cases like failure to trim the first block group and then only unallocated space is trimmed. Reported-by:
-
Jeff Mahoney authored
commit 5c061471 upstream. When we fail to start a transaction in btrfs_dev_replace_start, we leave dev_replace->replace_start set to STARTED but clear ->srcdev and ->tgtdev. Later, that can result in an Oops in btrfs_dev_replace_progress when having state set to STARTED or SUSPENDED implies that ->srcdev is valid. Also fix error handling when the state is already STARTED or SUSPENDED while starting. That, too, will clear ->srcdev and ->tgtdev even though it doesn't own them. This should be an impossible case to hit since we should be protected by the BTRFS_FS_EXCL_OP bit being set. Let's add an ASSERT there while we're at it. Fixes: e93c89c1 (Btrfs: add new sources for device replace code) CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Jeff Mahoney authored
commit 374b0e2d upstream. When we hit an I/O error in free_log_tree->walk_log_tree during file system shutdown we can crash due to there not being a valid transaction handle. Use btrfs_handle_fs_error when there's no transaction handle to use. BUG: unable to handle kernel NULL pointer dereference at 0000000000000060 IP: free_log_tree+0xd2/0x140 [btrfs] PGD 0 P4D 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI Modules linked in: <modules> CPU: 2 PID: 23544 Comm: umount Tainted: G W 4.12.14-kvmsmall #9 SLE15 (unreleased) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 task: ffff96bfd3478880 task.stack: ffffa7cf40d78000 RIP: 0010:free_log_tree+0xd2/0x140 [btrfs] RSP: 0018:ffffa7cf40d7bd10 EFLAGS: 00010282 RAX: 00000000fffffffb RBX: 00000000fffffffb RCX: 0000000000000002 RDX: 0000000000000000 RSI: ffff96c02f07d4c8 RDI: 0000000000000282 RBP: ffff96c013cf1000 R08: ffff96c02f07d4c8 R09: ffff96c02f07d4d0 R10: 0000000000000000 R11: 0000000000000002 R12: 0000000000000000 R13: ffff96c005e800c0 R14: ffffa7cf40d7bdb8 R15: 0000000000000000 FS: 00007f17856bcfc0(0000) GS:ffff96c03f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 0000000045ed6002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? wait_for_writer+0xb0/0xb0 [btrfs] btrfs_free_log+0x17/0x30 [btrfs] btrfs_drop_and_free_fs_root+0x9a/0xe0 [btrfs] btrfs_free_fs_roots+0xc0/0x130 [btrfs] ? wait_for_completion+0xf2/0x100 close_ctree+0xea/0x2e0 [btrfs] ? kthread_stop+0x161/0x260 generic_shutdown_super+0x6c/0x120 kill_anon_super+0xe/0x20 btrfs_kill_super+0x13/0x100 [btrfs] deactivate_locked_super+0x3f/0x70 cleanup_mnt+0x3b/0x70 task_work_run+0x78/0x90 exit_to_usermode_loop+0x77/0xa6 do_syscall_64+0x1c5/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f1784f90827 RSP: 002b:00007ffdeeb03118 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000556a60c62970 RCX: 00007f1784f90827 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000556a60c62b50 RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000556a60c63900 R11: 0000000000000246 R12: 0000556a60c62b50 R13: 00007f17854a81c4 R14: 0000000000000000 R15: 0000000000000000 RIP: free_log_tree+0xd2/0x140 [btrfs] RSP: ffffa7cf40d7bd10 CR2: 0000000000000060 Fixes: 681ae509 ("Btrfs: cleanup reserved space when freeing tree log on error") CC: <stable@vger.kernel.org> # v3.13 Signed-off-by:
-
Qu Wenruo authored
commit b72c3aba upstream. [BUG] For certain crafted image, whose csum root leaf has missing backref, if we try to trigger write with data csum, it could cause deadlock with the following kernel WARN_ON(): WARNING: CPU: 1 PID: 41 at fs/btrfs/locking.c:230 btrfs_tree_lock+0x3e2/0x400 CPU: 1 PID: 41 Comm: kworker/u4:1 Not tainted 4.18.0-rc1+ #8 Workqueue: btrfs-endio-write btrfs_endio_write_helper RIP: 0010:btrfs_tree_lock+0x3e2/0x400 Call Trace: btrfs_alloc_tree_block+0x39f/0x770 __btrfs_cow_block+0x285/0x9e0 btrfs_cow_block+0x191/0x2e0 btrfs_search_slot+0x492/0x1160 btrfs_lookup_csum+0xec/0x280 btrfs_csum_file_blocks+0x2be/0xa60 add_pending_csums+0xaf/0xf0 btrfs_finish_ordered_io+0x74b/0xc90 finish_ordered_fn+0x15/0x20 normal_work_helper+0xf6/0x500 btrfs_endio_write_helper+0x12/0x20 process_one_work+0x302/0x770 worker_thread+0x81/0x6d0 kthread+0x180/0x1d0 ret_from_fork+0x35/0x40 [CAUSE] That crafted image has missing backref for csum tree root leaf. And when we try to allocate new tree block, since there is no EXTENT/METADATA_ITEM for csum tree root, btrfs consider it's free slot and use it. The extent tree of the image looks like: Normal image | This fuzzed image ----------------------------------+-------------------------------- BG 29360128 | BG 29360128 One empty slot | One empty slot 29364224: backref to UUID tree | 29364224: backref to UUID tree Two empty slots | Two empty slots 29376512: backref to CSUM tree | One empty slot (bad type) <<< 29380608: backref to D_RELOC tree | 29380608: backref to D_RELOC tree ... | ... Since bytenr 29376512 has no METADATA/EXTENT_ITEM, when btrfs try to alloc tree block, it's an valid slot for btrfs. And for finish_ordered_write, when we need to insert csum, we try to CoW csum tree root. By accident, empty slots at bytenr BG_OFFSET, BG_OFFSET + 8K, BG_OFFSET + 12K is already used by tree block COW for other trees, the next empty slot is BG_OFFSET + 16K, which should be the backref for CSUM tree. But due to the bad type, btrfs can recognize it and still consider it as an empty slot, and will try to use it for csum tree CoW. Then in the following call trace, we will try to lock the new tree block, which turns out to be the old csum tree root which is already locked: btrfs_search_slot() called on csum tree root, which is at 29376512 |- btrfs_cow_block() |- btrfs_set_lock_block() | |- Now locks tree block 29376512 (old csum tree root) |- __btrfs_cow_block() |- btrfs_alloc_tree_block() |- btrfs_reserve_extent() | Now it returns tree block 29376512, which extent tree | shows its empty slot, but it's already hold by csum tree |- btrfs_init_new_buffer() |- btrfs_tree_lock() | Triggers WARN_ON(eb->lock_owner == current->pid) |- wait_event() Wait lock owner to release the lock, but it's locked by ourself, so it will deadlock [FIX] This patch will do the lock_owner and current->pid check at btrfs_init_new_buffer(). So above deadlock can be avoided. Since such problem can only happen in crafted image, we will still trigger kernel warning for later aborted transaction, but with a little more meaningful warning message. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200405Reported-by:
Xu Wen <wen.xu@gatech.edu> CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Qu Wenruo authored
commit 65c6e82b upstream. [BUG] When mounting certain crafted image, btrfs will trigger kernel BUG_ON() when trying to recover balance: kernel BUG at fs/btrfs/extent-tree.c:8956! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 662 Comm: mount Not tainted 4.18.0-rc1-custom+ #10 RIP: 0010:walk_up_proc+0x336/0x480 [btrfs] RSP: 0018:ffffb53540c9b890 EFLAGS: 00010202 Call Trace: walk_up_tree+0x172/0x1f0 [btrfs] btrfs_drop_snapshot+0x3a4/0x830 [btrfs] merge_reloc_roots+0xe1/0x1d0 [btrfs] btrfs_recover_relocation+0x3ea/0x420 [btrfs] open_ctree+0x1af3/0x1dd0 [btrfs] btrfs_mount_root+0x66b/0x740 [btrfs] mount_fs+0x3b/0x16a vfs_kern_mount.part.9+0x54/0x140 btrfs_mount+0x16d/0x890 [btrfs] mount_fs+0x3b/0x16a vfs_kern_mount.part.9+0x54/0x140 do_mount+0x1fd/0xda0 ksys_mount+0xba/0xd0 __x64_sys_mount+0x21/0x30 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe [CAUSE] Extent tree corruption. In this particular case, reloc tree root's owner is DATA_RELOC_TREE (should be TREE_RELOC), thus its backref is corrupted and we failed the owner check in walk_up_tree(). [FIX] It's pretty hard to take care of every extent tree corruption, but at least we can remove such BUG_ON() and exit more gracefully. And since in this particular image, DATA_RELOC_TREE and TREE_RELOC share the same root (which is obviously invalid), we needs to make __del_reloc_root() more robust to detect such invalid sharing to avoid possible NULL dereference as root->node can be NULL in this case. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200411Reported-by:
-
Qu Wenruo authored
commit 3628b4ca upstream. Some qgroup trace events like btrfs_qgroup_release_data() and btrfs_qgroup_free_delayed_ref() can still be triggered even if qgroup is not enabled. This is caused by the lack of qgroup status check before calling some qgroup functions. Thankfully the functions can handle quota disabled case well and just do nothing for qgroup disabled case. This patch will do earlier check before triggering related trace events. And for enabled <-> disabled race case: 1) For enabled->disabled case Disable will wipe out all qgroups data including reservation and excl/rfer. Even if we leak some reservation or numbers, it will still be cleared, so nothing will go wrong. 2) For disabled -> enabled case Current btrfs_qgroup_release_data() will use extent_io tree to ensure we won't underflow reservation. And for delayed_ref we use head->qgroup_reserved to record the reserved space, so in that case head->qgroup_reserved should be 0 and we won't underflow. CC: stable@vger.kernel.org # 4.14+ Reported-by:
-
Masami Hiramatsu authored
commit 18858511 upstream. Return -ENOENT error if there is no target synthetic event. This notices an operation failure to user as below; # echo 'wakeup_latency u64 lat; pid_t pid;' > synthetic_events # echo '!wakeup' >> synthetic_events sh: write error: No such file or directory Link: http://lkml.kernel.org/r/154013449986.25576.9487131386597290172.stgit@devboxAcked-by:
Tom Zanussi <zanussi@linux.intel.com> Tested-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Breno Leitao authored
commit 48dc0ef1 upstream. Test ptrace-tm-spd-gpr fails on current kernel (4.19) due to a segmentation fault that happens on the child process prior to setting cptr[2] = 1. This causes the parent process to wait forever at 'while (!pptr[2])' and the test to be killed by the test harness framework by timeout, thus, failing. The segmentation fault happens because of a inline assembly being generated as: 0x10000355c <tm_spd_gpr+492> lfs f0, 0(0) This is reading memory position 0x0 and causing the segmentation fault. This code is being generated by ASM_LOAD_FPR_SINGLE_PRECISION(flt_4), where flt_4 is passed to the inline assembly block as: [flt_4] "r" (&d) Since the inline assembly 'r' constraint means any GPR, gpr0 is being chosen, thus causing this issue when issuing a Load Floating-Point Single instruction. This patch simply changes the constraint to 'b', which specify that this register will be used as base, and r0 is not allowed to be used, avoiding this issue. Other than that, removing flt_2 register from the input operands, since it is not used by the inline assembly code at all. Cc: stable@vger.kernel.org Signed-off-by:
Breno Leitao <leitao@debian.org> Acked-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Masami Hiramatsu authored
commit 0d0352d8 upstream. Fix the synthetic event test case to remove event correctly. If redirecting command to synthetic_event file without append mode, it cleans up all existing events and execute (parse) the command. This means "delete event" always fails to find the target event. Since previous synthetic event has a bug which doesn't return -ENOENT even if it fails to find the deleting event, this test passed. But fixing that bug, this test fails because this test itself has a bug. This fixes that bug by trying to delete event right after adding an event, and use append mode redirection ('>>') instead of normal redirection ('>'). Link: http://lkml.kernel.org/r/154013452832.25576.2305459545429386517.stgit@devboxAcked-by:
Shuah Khan <shuah@kernel.org> Acked-by:
-
Johan Hovold authored
commit 1dc6bd5e upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent pmc node could end up being prematurely freed as of_find_node_by_name() drops a reference to its first argument. Fixes: 3568df3d ("soc: tegra: Add thermal reset (thermtrip) support to PMC") Cc: stable <stable@vger.kernel.org> # 4.0 Cc: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Bjorn Andersson authored
commit 137dc584 upstream. The scm device must be present in order for the rmtfs driver to configure memory permissions for the rmtfs memory region, so check that it is probed before continuing. Cc: stable@vger.kernel.org Fixes: fa65f804 ("soc: qcom: rmtfs-mem: Add support for assigning memory to remote") Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Thor Thayer authored
commit 74121b9a upstream. Correct the register size of the System Manager node. Cc: stable@vger.kernel.org Fixes: 78cd6a9d ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by:
Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
Thor Thayer authored
commit ce3bf934 upstream. The address in the SDRAM node was incorrect. Fix this to agree with the correct address and to match the reg definition block. Cc: stable@vger.kernel.org Fixes: 54b4a8f5("arm: socfpga: dts: Add Arria10 SDRAM EDAC DTS support") Signed-off-by:
-
Nicolas Pitre authored
commit 672ca9dd upstream. It is possible for corrupted filesystem images to produce very large block offsets that may wrap when a length is added, and wrongly pass the buffer size test. Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by:
Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Colin Ian King authored
commit 940c620d upstream. Currently a failed allocation of channel->name leads to an immediate return without freeing channel. Fix this by setting ret to -ENOMEM and jumping to an exit path that kfree's channel. Detected by CoverityScan, CID#1473692 ("Resource Leak") Fixes: 53e2822e ("rpmsg: Introduce Qualcomm SMD backend") Cc: stable@vger.kernel.org Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Tri Vo authored
commit 2a6c7c36 upstream. x0 is not callee-saved in the PCS. So there is no need to specify -fcall-used-x0. Clang doesn't currently support -fcall-used flags. This patch will help building the kernel with clang. Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Tri Vo <trong@android.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Hans Verkuil authored
commit 463659a0 upstream. These names have been renamed in the CTA-861 standard due to trademark issues. Replace them here as well so they are in sync with the standard. Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Cc: stable@vger.kernel.org Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Hans Verkuil authored
commit db034018 upstream. The CTA-861 standards have been updated to refer to opRGB instead of AdobeRGB. The official standard is in fact named opRGB, so switch to that. The two old defines referring to ADOBERGB in the public API are put under #ifndef __KERNEL__ and a comment mentions that they are deprecated. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org Acked-by:
-
Hans Verkuil authored
commit a58c3797 upstream. Drop all Adobe references and use the official opRGB standard instead. Signed-off-by:
-
Johan Hovold authored
commit ceff2f4d upstream. Use the new of_get_compatible_child() helper to lookup the sibling instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-sibling) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the parent device node). While at it, also fix the related cec-node reference leak. Fixes: 8f83f268 ("drm/mediatek: Add HDMI support") Cc: stable <stable@vger.kernel.org> # 4.8 Cc: Junzhi Zhao <junzhi.zhao@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Hans Verkuil authored
commit ab83203e upstream. When there is no EDID the CEC adapter should be unconfigured as well. So call cec_phys_addr_invalidate() when this happens. Signed-off-by:
-
Hans Verkuil authored
commit e7da8992 upstream. When there is no EDID the CEC adapter should be unconfigured as well. So call cec_phys_addr_invalidate() when this happens. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 258c4304 upstream. The a->index is not the name of the internal amux entry, but, instead a value from zero to the maximum number of audio inputs. As the actual available inputs depend on each board, build it dynamically. This is broken for a really long time. On a quick check, since at least commit 195a4ef6 ("V4L/DVB (6585): Convert em28xx to video_ioctl2") this was not implemented right. Fixes: 195a4ef6 ("V4L/DVB (6585): Convert em28xx to video_ioctl2") Cc: stable@vger.kernel.org Signed-off-by:
-
Mauro Carvalho Chehab authored
commit afeaade9 upstream. The v4l2-compliance tool complains if a video doesn't start with a zero sequence number. While this shouldn't cause any real problem for apps, let's make it happier, in order to better check the v4l2-compliance differences before and after patchsets. This is actually an old issue. It is there since at least its videobuf2 conversion, e. g. changeset 3829fadc461 ("[media] em28xx: convert to videobuf2"), if VB1 wouldn't suffer from the same issue. Cc: stable@vger.kernel.org Fixes: d3829fad ("[media] em28xx: convert to videobuf2") Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 15644bfa upstream. Instead of using a register value, use an AMUX name, as otherwise VIDIOC_G_AUDIO would fail. Cc: stable@vger.kernel.org Fixes: 766ed64d ("V4L/DVB (11827): Add support for Terratec Grabster AV350") Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 5c4c4505 upstream. The parameters of v4l2_ctrl_new_std_menu_items() are tricky: instead of the number of possible values, it requires the number of the maximum value. In other words, the ARRAY_SIZE() value should be decremented, otherwise it will go past the array bounds, as warned by KASAN: [ 279.839688] BUG: KASAN: global-out-of-bounds in v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839709] Read of size 8 at addr ffffffffc10a4cb0 by task v4l2-compliance/16676 [ 279.839736] CPU: 1 PID: 16676 Comm: v4l2-compliance Not tainted 4.18.0-rc2+ #120 [ 279.839741] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 [ 279.839743] Call Trace: [ 279.839758] dump_stack+0x71/0xab [ 279.839807] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839817] print_address_description+0x1c9/0x270 [ 279.839863] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839871] kasan_report+0x237/0x360 [ 279.839918] v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839964] __video_do_ioctl+0x2c8/0x590 [videodev] [ 279.840011] ? copy_overflow+0x20/0x20 [videodev] [ 279.840020] ? avc_ss_reset+0xa0/0xa0 [ 279.840028] ? check_stack_object+0x21/0x60 [ 279.840036] ? __check_object_size+0xe7/0x240 [ 279.840080] video_usercopy+0xed/0x730 [videodev] [ 279.840123] ? copy_overflow+0x20/0x20 [videodev] [ 279.840167] ? v4l_enumstd+0x40/0x40 [videodev] [ 279.840177] ? __handle_mm_fault+0x9f9/0x1ba0 [ 279.840186] ? __pmd_alloc+0x2c0/0x2c0 [ 279.840193] ? __vfs_write+0xb6/0x350 [ 279.840200] ? kernel_read+0xa0/0xa0 [ 279.840244] ? video_usercopy+0x730/0x730 [videodev] [ 279.840284] v4l2_ioctl+0xa1/0xb0 [videodev] [ 279.840295] do_vfs_ioctl+0x117/0x8a0 [ 279.840303] ? selinux_file_ioctl+0x211/0x2f0 [ 279.840313] ? ioctl_preallocate+0x120/0x120 [ 279.840319] ? selinux_capable+0x20/0x20 [ 279.840332] ksys_ioctl+0x70/0x80 [ 279.840342] __x64_sys_ioctl+0x3d/0x50 [ 279.840351] do_syscall_64+0x6d/0x1c0 [ 279.840361] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 279.840367] RIP: 0033:0x7fdfb46275d7 [ 279.840369] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 [ 279.840474] RSP: 002b:00007ffee1179038 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 279.840483] RAX: ffffffffffffffda RBX: 00007ffee1179180 RCX: 00007fdfb46275d7 [ 279.840488] RDX: 00007ffee11790c0 RSI: 00000000c02c5625 RDI: 0000000000000003 [ 279.840493] RBP: 0000000000000002 R08: 0000000000000020 R09: 00000000009f0902 [ 279.840497] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffee117a5a0 [ 279.840501] R13: 00007ffee11790c0 R14: 0000000000000002 R15: 0000000000000000 [ 279.840515] The buggy address belongs to the variable: [ 279.840535] tvp5150_test_patterns+0x10/0xffffffffffffe360 [tvp5150] Fixes: c43875f6 ("[media] tvp5150: replace MEDIA_ENT_F_CONN_TEST by a control") Cc: stable@vger.kernel.org Signed-off-by:
-
